AS 70SR2 (WP's) stops when connecting to upgraded system.

Hi,
I have installed an application server (NW7.0SR2) for our new ECC60 sandbox, which is upgraded from 4.6C. The AS and the DB server are on 2 different hosts.
When I try to start the AS it seems to work but the processes dies. The AS server is 64bit W2K3 ENT SP2 R2 with 12GB RAM.
I would really appreciate some input:)
Here are the trace files dev_disp and dev_w0
trc file: "dev_disp", trc level: 1, release: "700"
sysno      01
sid        S23
systemid   562 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    179
intno      20050900
make:      multithreaded, ASCII, 64 bit, optimized
pid        2808
Fri Oct 03 12:39:57 2008
kernel runs with dp version 241(ext=110) (@(#) DPLIB-INT-VERSION-241)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2808) [dpxxdisp.c ;  1285]
shared lib "dw_xml.dll"; version 179 successfully loaded
shared lib "dw_xtc.dll"; version 179 successfully loaded
shared lib "dw_stl.dll"; version 179 successfully loaded
shared lib "dw_gui.dll"; version 179 successfully loaded
shared lib "dw_mdm.dll"; version 179 successfully loaded
rdisp/softcancel_sequence :  -> 0,5,-1
use internal message server connection to port 36000
Fri Oct 03 12:40:01 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c ; 5418]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >dksnss23ap3_S23_01                      <
DpShMCreate: sizeof(wp_adm) 11024 (1224)
DpShMCreate: sizeof(tm_adm) 5283968 (26288)
DpShMCreate: sizeof(wp_ca_adm) 18048 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
DpShMCreate: sizeof(comm_adm) 552064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1616)
DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000D7B0050, size: 5941072)
DpShMCreate: allocated sys_adm at 000000000D7B0050
DpShMCreate: allocated wp_adm at 000000000D7B1C90
DpShMCreate: allocated tm_adm_list at 000000000D7B47A0
DpShMCreate: allocated tm_adm at 000000000D7B4800
DpShMCreate: allocated wp_ca_adm at 000000000DCBE880
DpShMCreate: allocated appc_ca_adm at 000000000DCC2F00
DpShMCreate: allocated comm_adm at 000000000DCC4670
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000DD4B2F0
DpShMCreate: allocated gw_adm at 000000000DD4B370
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000DD4B3A0
DpShMCreate: allocated wall_adm at 000000000DD4B3B0
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Oct 03 12:40:02 2008
rdisp/queue_size_check_value :  -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( dksnss23) [dpxxdisp.c ;  12408]
DpStartStopMsg: send start message (myname is >dksnss23ap3_S23_01                      <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
Release check o.K.
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c ;  1050]
Fri Oct 03 12:41:02 2008
ERROR => DpWPCheck: W0 (pid 1680) died (severity=0, status=0) [dpxxdisp.c ;  15534]
ERROR => DpWPCheck: W2 (pid 720) died (severity=0, status=0) [dpxxdisp.c ;  15534]
my types changed after wp death/restart 0x89 --> 0x88
ERROR => DpWPCheck: W4 (pid 2212) died (severity=0, status=0) [dpxxdisp.c ;  15534]
ERROR => DpWPCheck: W5 (pid 1908) died (severity=0, status=0) [dpxxdisp.c ;  15534]
ERROR => DpWPCheck: W6 (pid 1136) died (severity=0, status=0) [dpxxdisp.c ;  15534]
my types changed after wp death/restart 0x88 --> 0x80
ERROR => DpWPCheck: W8 (pid 888) died (severity=0, status=0) [dpxxdisp.c ;  15534]
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=545
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 03 12:41:12 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Oct 03 10:41:12 2008
========================
No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
0 DIA     1680 Ended         no      2   0        0                                                                          
1 DIA     2152 Ended         no      1   0        0                                                                          
2 DIA      720 Ended         no      2   0        0                                                                          
3 DIA     2556 Ended         no      1   0        0                                                                          
4 DIA     2212 Ended         no      2   0        0                                                                          
5 DIA     1908 Ended         no      2   0        0                                                                          
6 BTC     1136 Ended         no      2   0        0                                                                          
7 BTC     1284 Ended         no      1   0        0                                                                          
8 BTC      888 Ended         no      2   0        0                                                                          
Dispatcher Queue Statistics Fri Oct 03 10:41:12 2008
===========================
--------++++--
+
|  Typ |    now |   high |    max | writes |  reads |
--------++++--
+
| NOWP |      0 |      2 |   2000 |     11 |     11 |
--------++++--
+
|  DIA |      5 |      5 |   2000 |      5 |      0 |
--------++++--
+
|  UPD |      0 |      0 |   2000 |      0 |      0 |
--------++++--
+
|  ENQ |      0 |      0 |   2000 |      0 |      0 |
--------++++--
+
|  BTC |      0 |      0 |   2000 |      0 |      0 |
--------++++--
+
|  SPO |      0 |      0 |   2000 |      0 |      0 |
--------++++--
+
|  UP2 |      0 |      0 |   2000 |      0 |      0 |
--------++++--
+
max_rq_id 14
wake_evt_udp_now 0
wake events       total    11,  udp     9 ( 81%),  shm     2 ( 18%)
since last update total    11,  udp     9 ( 81%),  shm     2 ( 18%)
Dump of tm_adm structure: Fri Oct 03 10:41:12 2008
=========================
Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
Workprocess Comm. Area Blocks Fri Oct 03 10:41:12 2008
=============================
Slots: 300, Used: 1, Max: 1
--------++--
+
|   id | owner        |   pid    | eyecatcher  |
--------++--
+
|    0 | DISPATCHER   |       -1 | *WPCAAD000* |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=545
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 03 12:41:17 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >dksnss23ap3_S23_01                      < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2812) (SOFT_KILL)
Stop icman
killing process (2764) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives  (PID:2812  HANDLE:512)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=545
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 03 12:41:18 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died  (PID:2812  HANDLE:512)
wait for end of icman
[DpProcDied] Process lives  (PID:2764  HANDLE:520)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=545
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 03 12:41:19 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:2764  HANDLE:520)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=545
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 03 12:41:20 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died  (PID:2764  HANDLE:520)
DpStartStopMsg: send stop message (myname is >dksnss23ap3_S23_01                      <)
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER                              
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Fri Oct 03 12:41:21 2008
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c ;  12754]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 524 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 524 (pos=2)
SiSelNRemove: removed sock 524
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/9
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 17)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 524
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2808) [dpxxdisp.c ;  10952]
Good Bye .....
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B  
B Fri Oct 03 12:40:02 2008
B  create_con (con_name=R/3)
B  Loading DB library 'D:\usr\sap\S23\D01\exe\dboraslib.dll' ...
B  Library 'D:\usr\sap\S23\D01\exe\dboraslib.dll' loaded
B  Version of 'D:\usr\sap\S23\D01\exe\dboraslib.dll' is "700.08";, patchlevel (0.107)
B  New connection 0 created
M sysno      01
M sid        S23
M systemid   562 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    179
M intno      20050900
M make:      multithreaded, ASCII, 64 bit, optimized
M pid        1680
M
M  kernel runs with dp version 241(ext=110) (@(#) DPLIB-INT-VERSION-241)
M  length of sys_adm_ext is 364 bytes
M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1680) [dpxxdisp.c ;  1347]
I  MtxInit: 30000 0 0
M  DpSysAdmExtCreate: ABAP is active
M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M  DpShMCreate: sizeof(wp_adm) 11024 (1224)
M  DpShMCreate: sizeof(tm_adm) 5283968 (26288)
M  DpShMCreate: sizeof(wp_ca_adm) 18048 (60)
M  DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
M  DpShMCreate: sizeof(comm_adm) 552064 (1088)
M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M  DpShMCreate: sizeof(slock_adm) 0 (104)
M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M  DpShMCreate: sizeof(file_adm) 0 (72)
M  DpShMCreate: sizeof(vmc_adm) 0 (1616)
M  DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
M  DpShMCreate: sizeof(gw_adm) 48
M  DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F7B0050, size: 5941072)
M  DpShMCreate: allocated sys_adm at 000000000F7B0050
M  DpShMCreate: allocated wp_adm at 000000000F7B1C90
M  DpShMCreate: allocated tm_adm_list at 000000000F7B47A0
M  DpShMCreate: allocated tm_adm at 000000000F7B4800
M  DpShMCreate: allocated wp_ca_adm at 000000000FCBE880
M  DpShMCreate: allocated appc_ca_adm at 000000000FCC2F00
M  DpShMCreate: allocated comm_adm at 000000000FCC4670
M  DpShMCreate: system runs without slock table
M  DpShMCreate: system runs without file table
M  DpShMCreate: allocated vmc_adm_list at 000000000FD4B2F0
M  DpShMCreate: allocated gw_adm at 000000000FD4B370
M  DpShMCreate: system runs without vmc_adm
M  DpShMCreate: allocated ca_info at 000000000FD4B3A0
M  DpShMCreate: allocated wall_adm at 000000000FD4B3B0
M  rdisp/queue_size_check_value :  -> off
M  ThTaskStatus: rdisp/reset_online_during_debug 0
X  EmInit: MmSetImplementation( 2 ).
X  MM global diagnostic options set: 0
X  <ES> client 0 initializing ....
X  Using implementation view
X  <EsNT> Using memory model view.
M  <EsNT> Memory Reset disabled as NT default
X  ES initialized.
X  mm.dump: set maximum dump mem to 96 MB
M  
M Fri Oct 03 12:40:03 2008
M  ThInit: running on host dksnss23ap3
M  calling db_connect ...
C  Prepending D:\usr\sap\S23\D01\exe to Path.
M  call semaphore clean-up function ...
M  ***LOG Q0E=> DpSigGenHandler, Exception (c06d007e) [dpnttool.c ;  438]
M  -
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c06d007e (Unknown exception)
App       : disp+work.EXE (pid=1680)
When      : 10/3/2008 12:40:3.953
Threads   : 2
Computer Name       : DKSNSS23AP3
User Name           : s23adm
Number of Processors: 2
Processor Type: AMD64 Family 15 Model 65 Stepping 2
Windows Version     : 5.2 Current Build: 3790
State Dump for Thread Id bf8
--> (FAULT) Stack Back Trace <--
FramePtr         ReturnAd         Param#1          Function Name
0000000006bdf720 000000001003c72a 0000000000000003 kernel32!PulseEvent
0000000006bdf7f0 000000001003be46 000000001015b000 dboraslib!__delayLoadHelper2 [delayhlp.cpp (271)]
0000000006bdf860 000000001000397d 0000000006bdf8b0 dboraslib!_tailMerge_OCI_dll
0000000006bdf8c0 00000000100208a8 0000003d00000000 dboraslib!get_oci_client_version [dboci.c (2823)]
0000000006bdfa90 0000000001241037 0000000006bdfd80 dboraslib!DbSlConnect [dbsloci.c (1860)]
0000000006bdfce0 000000000124146e 0000000000000000 disp+work!open_con [dbcon.c (3582)]
0000000006bdfd50 000000000124462e 00000000ffffffff disp+work!supply_con [dbcon.c (3835)]
0000000006bdfd90 0000000001236e6c 0000000000000001 disp+work!dbsl_connect [dbslxxx.c (232)]
0000000006bdfdf0 00000000004cb61f 00000000094d4ba4 disp+work!db_connect [dblink.c (422)]
0000000006bdfe80 00000000004dd569 0000000006c5cb7d disp+work!ThInit [thxxhead.c (1442)]
0000000006bdfeb0 000000000042f93b 000007ffe3920000 disp+work!ThStart [thxxhead.c (1142)]
0000000006bdfee0 000000000040109d ffffffff00000003 disp+work!DpMain [dpxxdisp.c (1164)]
0000000006bdff10 000000000199e0c1 0000000000000000 disp+work!nlsui_main [thxxanf.c (84)]
0000000006bdff70 0000000077d5964c 0000000000000000 disp+work!mainCRTStartup [crtexe.c (501)]
0000000006bdffa0 0000000000000000 000000000199df50 kernel32!BaseProcessStart
State Dump for Thread Id 63c
--> Stack Back Trace <--
FramePtr         ReturnAd         Param#1          Function Name
000000000d79fe40 0000000077d5f691 0000000006c1e1a0 ntdll!NtFsControlFile
000000000d79feb0 00000000018886df 0000000000000000 kernel32!ConnectNamedPipe
000000000d79ff40 000007ff7fc411c4 0000000000000000 disp+work!SigIMsgFunc [signt.c (679)]
000000000d79ff70 0000000077d6b6da 0000000077d6b6a0 msvcrt!endthreadex
000000000d79ffa0 0000000000000000 0000000000000000 kernel32!BaseThreadStart
M  -
M  
M Fri Oct 03 12:40:04 2008
M  call clean-up function ...
M  in_ThErrHandle: 1
M  ThSigHandler: signal (step 1, th_errno 11, action 4)
M  
M  Info for wp 0
M  
M    pid = 1680
M    severity = 0
M    status = 0
M    stat = WP_RUN
M    waiting_for = NO_WAITING
M    reqtype = DP_RQ_DIAWP
M    act_reqtype = NO_REQTYPE
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source =
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M    mode_cleaned_counter = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    attachedVm = no VM
M  
M  *****************************************************************************
M  *
M  *  LOCATION    SAP-Server dksnss23ap3_S23_01 on host dksnss23ap3 (wp 0)
M  *  ERROR       ThSigHandler: signal
M  *
M  *  TIME        Fri Oct 03 12:40:04 2008
M  *  RELEASE     700
M  *  COMPONENT   Taskhandler
M  *  VERSION     1
M  *  RC          11
M  *  MODULE      thxxhead.c
M  *  LINE        10754
M  *  COUNTER     1
M  *
M  *****************************************************************************
M  
M  PfStatDisconnect: disconnect statistics
M  Entering TH_CALLHOOKS
M  ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c ;  723]
M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c ; 261]
M  Entering ThSetStatError
M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M  Entering ThReadDetachMode
M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 1680) [dpnttool.c ;  333]
M  return from clean-up function ...

You said your "AS server is 64bit",,, but the error on dev_w0 talks about Kernel32...
Maybe thats the problem
0000000006bdf720 000000001003c72a 0000000000000003 kernel32!PulseEvent
Regards
Juan

Similar Messages

  • Video capture stops when connected to FCP using fire wire

    Captured video using Sony VX2000 using 48 khz and 16 bit audio stereo mode. Using Sony Premium miniDV tapes.
    Video plays back fine when not connected via firewire to G4 dual 867 with 2 GB Ram.
    Using default capture preset of 48 khz 16 bit, connect fire wire and video capture randomly stops stating it has lost connection or is missing capture data. If I switch to just plain capture using non controllable device, I have the same issue except the tape keeps playing but FCP stops capturing.
    Tried other tapes and no problem.
    Tried other fire wire cable and no problem.
    I am having problems only on this tape and when connected.
    When not connected it plays back on the camera with no stopping.
    Steve Bowers

    To answer your questions--
    Dumping preferences usually does not cause problems. More likely you updated some part of your system or are having other hardware issues.
    No updates or hardware issues. The original problem (discussed in another thread) was one where the video is skewed inward on the lower right corner. Apple instructed me to dump the preferences and start from scratch. That I did and now I am experiencing problems I did not have before. If it is hardware problems, then I guess it is just coincidental that FCP is just now presenting problems. However, the other problems I am having are software related and does not involve the camera.
    What software versions of FCP, OSX and QT are you running and have you updated any of them recently?
    FCP version-5.1.2
    OSX-10.4.8
    QT-7.1.3
    Is there anything special about the 'difficult' tape?
    No.
    Did you record it?
    Yes
    Was it the last of a bunch?
    Not sure. I buy bulk so this was one in a box of 5 that is was in a case of 50 boxes.
    Are you using the same camera as the playback device?
    Yes
    Does it work if you use another computer?
    Not sure what you mean. I have only one MAC G4.
    Was it recorded using another camera in a non-DV format?
    No. Playback is through same camera is was recorded on.

  • Itunes starts/stops when connecting to Airport Express

    When I try and play songs via my wireless laptop, the music will stop/start as if it is trying to connect to my airport express. But, if I play the music from my desktop that is connected directly to my wireless router, it will play just fine (no pauses).
    I have a Linksys 4-port Wireless G Router (model WRT54G).
    Need some advice on how to get my laptop to play music without starting or stopping

    It appears iTunes is indeed looking for speakers connected via airport express, but, as your router isn't an airport product, it doesn't succeed.
    Try turning off the airtunes function in the iTunes preferences.

  • Error when connect from portal system (abap ) to external ssl client - sm59

    Hi I am tryign to setup a ssl connection from the abap sm59 portal system to an exteral server.. I have setup the certs that the client has given me in strust.but i m gettign the ffg error.
    sysno      60
    sid        PID
    systemid   370 (Solaris on SPARCV9 CPU)
    relno      7110
    patchlevel 0
    patchno    150
    intno      20020600
    make       multithreaded, Unicode, 64 bit, optimized
    profile    /usr/sap/PID/SYS/profile/PID_DVEBMGS60_pidevdb
    pid        3911
    [Thr 01] Thu Jun 14 08:38:48 2012
    [Thr 01] TRACE FILE TRUNCATED
    [Thr 07] Thu Jun 14 08:39:07 2012
    [Thr 07] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_SSL
    [Thr 07]    session uses PSE file "/usr/sap/PID/DVEBMGS60/sec/SAPSSLA.pse"
    [Thr 07] SecudeSSL_SessionStart: SSL_connect() failed
    [Thr 07]   secude_error 536871970 (0x20000422) = "SSL record with the wrong SSLPlaintext.version received"
    [Thr 07] >>            Begin of Secude-SSL Errorstack            >>
    [Thr 07] ERROR in ssl3_get_record: (536871970/0x20000422) SSL record with the wrong SSLPlaintext.version received
    [Thr 07] <<            End of Secude-SSL Errorstack
    [Thr 07]   SSL_get_state() returned 0x00002120 "SSLv3 read server hello A"
    [Thr 07]   SSL NI-sock: local=57.24.111.151:34110  peer=57.24.110.116:5081
    [Thr 07] <<- ERROR: SapSSLSessionStart(sssl_hdl=10720d530)==SSSLERR_SSL_CONNECT
    [Thr 07] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-57): SSSLERR_SSL_CONNECT {00020a7c} [icxxconn_mt.c 1957]
    When i change the sm59 connection not to use ssl. it give me a pop up screen . and asks me to enter user and password...
    He then  give me a private key file .. i.e a .pfx file but not sure how to load this in strust. I tried to convert in useign sapgenpse. but it fails with teh ffg error
    12% sapgenpse import_p12  -p /usr/sap/PID/amos/amos_client.pse /usr/sap/PID/amos/amos_client_pk.pfx
    import_p12: MISSING password for PKCS#12 file "/usr/sap/PID/amos/amos_client_pk.pfx"
    Please enter PKCS#12 encryption  password: *******
    PKCS#12/PFX file contains 1 keypair:
      1. FriendlyName = "amos.server.interface.webuser.web_int.cert"
         X.509v3 (type=Both) RSA-2048 (signed with sha1WithRsaEncryption)
         Subject="CN=AMOS WebService Interface Client, OU=IT&S MRO, O=South African Airways (Pty) Ltd, L=OR Tambo International Airport, SP=Gauteng, C=ZA"
         Issuer ="[email protected], CN=ca.flysaa.com, OU=Certificate Authority, O=South African Airways (Pty) Ltd, L=OR Tambo International Airport, SP=Gauteng, C=ZA"
    ERROR: Incomplete certification path -- NEED certificate of "[email protected], CN=ca.flysaa.com, OU=Certificate Authority, O=South African Airways (Pty) Ltd, L=OR Tambo International Airport, SP=Gauteng, C=ZA"!
    I have attached a doc of what it looks like.. appreciate any help

    Hi,
    There is an error in the publishing of template
    Template :"bbpsc02" is not publised in ITS.
    Go to T.code: SE80
    Publish all the templates again and check
    Check with your SAP  BASIS team for the help
    Regards
    Ganesh

  • Playlist empty when connected to car system

    Since upgrading to iOS6.0, though the songs in my iTunes playlist show up on my iPhone 4S, whenever I connect the phone to my Hyundai system, the playlist becomes empty. The only songs I can play are the ones that are not in the cloud. Didn't have this problem pre-iOS6.

        Hi vance23! Other than this trouble with the bluetooth, I hope you're enjoying your new phone. Our customers' safety is very important to us, so I'm glad you're trying to use your hands free options. Many times, third party bluetooth devices may have compatibility issues with certain types of bluetooth devices that haven't been tested. Since your HTC is successfully finding and pairing to the stereo, that leads me to believe it may not have been tested to work with the 4G LTE Incredible. Have you checked with the manufacturer of your aftermarket stereo to see if it's compatible with the 4.0 bluetooth wireless technology in your new phone? Is the phone able to place and receive calls when not connected to your car bluetooth? Have you tried any other bluetooth accessories?
    We have lots of great bluetooth accessories that are compatible with the new 4.0 technology at http://bit.ly/Xd7EZi if you'd like to take a look at a few other options too.
    Thank you
    JenniferH_VZW
    Please follow us on Twitter @vzwsupport

  • BEx error when connecting to BW system

    I get the error below when trying to connect remotely to BW 3.1 system using BEx Analyzer. I can connect successfully to the BW system using SAPLogon and BEx install appears to be correct. I connect successfully to BEx 3.5 and BEx BI sandboxes. Any ideas.
    <----
    >
    Error Group
    RFC_ERROR_COMMUNICATION
    Message
    CMALLC : rc=20 > Connect from SAP gateway to RFC server failed
    Connect_PM  GWHOST=<...>, GWSERV=sapgw57, SYSNR=57
    LOCATION    SAP-Gateway on host <...>.com / sapgw57
    ERROR       partner not reached (host xxx.xxx.xx.xxx, service sapgw57)
    TIME        Tue Mar 27 06:23:23 2007
    RELEASE     640
    COMPONENT   NI (network interface)
    VERSION     37
    RC          -10
    MODULE      nixxi.cpp
    LINE        8724
    DETAIL      NiPCo

    Is the IP address correct? do you use IP address in your sap logon pad or hostname/servername ? do you maintain the IP mapping in 'host' file ? changed accordingly ?
    also try to search if there are 2 'saplogon.ini' file, maybe the one with IP updated not used by BEx, try to overwrite with the latest one. normaly located in windows folder and program files\... \frontend ...
    Hope it helps.
    Regards

  • DCOM errors on site server when connecting to site systems in remote untrusted domains

    When the site component manager and sms executive is trying to access site systems in remote domains in untrusted forest i got a lot of events in the system log with event id 10028:
    "DCOM was unable to communicate with the computer <computername> using any of the configured protocols; requested by PID     32a4 (D:\Program Files\Microsoft Configuration Manager\bin\x64\sitecomp.exe)."
    "DCOM was unable to communicate with the computer <computername> using any of the configured protocols; requested by PID     2990 (D:\Program Files\Microsoft Configuration Manager\bin\x64\smsexec.exe)."
    I have checked the sitecomp.log and smsexec.log for errors, but I can´t find anything wrong and everything seems to be working fine. I am using Site system installation account to connect to the site systems. Is this normal behavior?
    Thanks
    Markus Lindgren
    kungcocos

    Here's the answer from SA support:
    Reason behind the errors in DCOM :The SCCM 2012 Server will always connect to all the MPs with the system account, and will use the console provided remote forest credentials only to run the MP
    management.
    Whenever we attempt a connection SCCM build a list of available accounts (Site System Installation Account
    + Machine Account) and loop through them attempting each option in turn. The machine account is always (as far as I know) a member of this list – if you don’t specify
    a site system connection account then it will never connect if the machine account fails – but that’s not the same as saying specifying a site system connection account means we won’t try the machine account first.
    So this is something "by design" and shouldn't cause any troubles to the SCCM systems.

  • When connecting to remote system, once again asking user & password details

    hi
    I created one RFC in R/3 system, with the same logical system name of xi, giving all technical and logon details.
    When I click on remote logon to enter into xi system,it is once again asking user logon details. After entering the details it is allowing into the xi system. Directly it is not entering into remote system when I click remote logon button.
    I created both sides (in xi and R/3) and checked the same thing. Both sides I am getting the same problem. it is showing client name correctly but user and password name it is displaying the same server information. like if I am connecting from R/3 to XI means it is showing XI client number but R/3 user and password. Once after I change user and password and press enter it is going into remote system.
    Could someone please help me on this?
    Thanks in advance and best regards,
    1234

    hi lavanya
    Provide the user with the corresponding authorization or avoid using the protected users DDIC and SAP*
    check below
    Trusting Transaction SMT2                                                    
    The trusting transaction SMT2 (or SM59 ® RFC ® Trusting Systems) constructs a list of all trusting systems that have been established for this trusted system. Here, a logon and authorization check for the current user and client is performed, using the destination TRUSTING_SYSTEM@S00 that has been automatically created.      
    This basically corresponds to transaction SM51, if you use Remote Login to perform a logon on a different application server.                                                                               
    If problems occur while setting the destination TRUSTING_SYSTEM@S00 (such as host name or service information), you either have to create a new destination for your needs, and then enter the host name or service information using SAP router strings, or adjust the network settings of the server. To correct the problem in transaction SMT2, you have to adjust the network configuration of the server. As this transaction is only to be used for test purposes, in this case you could also choose to ignore the error.                                                              
    To perform a logon as a different user or client, you have to create a new RFC destination with a trusted option set.                                                                
    In this scenario, the following error text in SMT2 can be ignored:
    No authorization to log on as a trusted system (Trusted RC=0)
    If the host name contains the character '_' (as in "my_host"), then the generation of the related trusting system destination may lead to incorrect settings. This problem can be corrected by implementing Support Package SAPKB46D09 (see below). For earlier releases, the changes required to correct the problem can be made manually.
    regards
    kummari

  • No system available - When connecting to backend system

    In the VC we have created our models, we then select data, then click on the portal connect button, the logon page is then displayed from which we log-on, the logon page disappears and the VC 'Data' page is displayed, the 'Connect to System' field display's a message 'NO SYSTEMS AVAILABLE'.
    We have checked and tested the Portal settings which are all connect the R3.
    The VC has previously been working and we have implemented a live application last year, however, we have recently re-built our server and ever since the VC has been displaying the above error message.
    We are on EP6 SP2, and the VC version 6
    Can anyone please help...

    hi
    since you said you rebuilt the server and all. you might want to check the user mappings for the systems you have in the portal.
    plus try redeploying the portaladdons for the visual composer.
    hope that helps.

  • Error -127 when trying to upgrade System 9.1 to 9.2.1

    I am trying to upgrade a Beige G3 Powermac, currently running System 9.1, to System 9.2.1 and then System 9.2.2. I have 96 MB of memory and over 5GB of free disk space. I downloaded the 9.2.1. upgrade from another machine, burned it to a CD, and then doubleclicked the 9.2.1 icon on the CD. I specified a new destination folder on my hard disk; StuffIt began decompressing 9.2.1; and then, when the decompression was finished or nearly finished, the useless error appeared:
    The disk "MacOS 9.2.1 Update" cannot be used, because an error of type -127 occurred.
    Successive iterations of the same procedure failed. Any suggestions?
    This G3, I hope, is more hospitable to old files that I need to restore than a new machine would be.

    Hi, Skepto12 -
    That error is most commonly caused by Stuffit Expander intruding where it should not. The download is in a .smi (self-mounting image) format, a format generated by Apple's Disk Copy. Stuffit Expander has ShrinkWrap technology built-in, which allows it to mount some kinds of disk images - but not .smi ones. Yet ShrinkWrap tries to - hence the error message.
    The solution - double-click Stuffit Expander, and open its Preferences (under the File menu). Select "Disk Images" from the list on the left, then turn off (uncheck) "Mount Disk Images". Quit Stuffit Expander.

  • Ipod nano freezes pc when connected

    Hi,
    I bought a brand new I pod 2 weeks ago, loaded the current itunes version and after a few hick ups itunes loaded the music on my ipod. Now a few days later my computer totally freezes as soon as I connect the ipod to the pc. I tried everything, setting back the ipod, deinstall and reinstall itunes, even an older version of itunes, tried all available usb ports (all 2.0 versions)...nothing. I also blocked the firewall and the antivirus guard...nothing.
    still full stop when connected. itunes recognizes my ipod on the screen but then it stopps. I have to restart the pc to keep on working with it. I also tried other pc's. An apple one worked fine with my ipod, another pc recognized it on the F drive and did not freeze it so I don't think the little beauty itself is the problem.
    Any idea to help my restless soul... ;-)???
    PC   Windows XP  

    OK, here I am back again.
    My ipod was restored by my friend who used an apple computer with the latest version of itunes 7.....
    So I started from scratch, installed an earlier version of itunes (6.0.2 or so), put my music on, connected my ipod (no freezing yet) but it immediatelly asked me to use this ipod with the new version 7.0.2. I then upgraded the existing to 7.0.2 and then...as soon as I connected my ipod it recognized it, told me that it is originally communicating with another bibliothek and asked if I wanted to synchronize or only load the bought items etc...and...
    did not load any songs on the ipod and....
    Freeeeeeeeezzzzzzeeeee !!!! I could not move any mouse or curser on my pc anymore. What do you mean, should I throw away my computer...it looks like is definetly not the ipod.
    PC   Windows XP  

  • I can listen to the Music Library in my Ipad through home sharing, but I can't do it in my Iphone. When Iphone managed to connect my Mac, I can see how a watch turns clockwise but it stops when it arrives at a half of the watch. What can I do?

    I can listen to the Music Library in my Ipad through home sharing, but I can't do it in my Iphone. When Iphone managed to connect my Mac, I can see how a watch turns clockwise but it stops when it arrives at a half of the watch. What can I do?

    Hi there,
    You may want to take a look at some of the troubleshooting steps found in the article below.
    Troubleshooting Home Sharing
    http://support.apple.com/kb/ts2972
    Hope that helps,
    Griff W.

  • My ipod touch has stopped playing through my Sony docking station, It only plays through i pod. It's not the docking station as my daughter's ipod works fine on it. It can synch when connected to computer. Any ideas what is wrong?

    My ipod touch has stopped playing through my Sony docking station, It only plays through the i pod. It's not the docking station as my daughter's ipod works fine on it. It can synch when connected to computer. Any ideas what is wrong?

    Have  discovered that I had not in fact updated the ios!!
    Went through the process last night and my ipod now works fine on my docking station.
    Thank you very much for your advice.

  • ITunes stop working when connecting ipod 4th generation on Vista

    When connecting ipod 4th generation to a computer running Vista Ultimate, ITunes (version 8) closes. Windows provide the following message - iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
    Thanks!

    i have the same issue... but i found a workaround.. i tried 3 diff OS's . didnt change the problem. To Add apps or music to ur Ipod... simply DISCONNECT the Ipod from the PC then add files/folders to library. Then connect the ipod back to PC and sync. it has no problem adding the files that way (at least in my case) I hope this helps... Good Luck =)

  • HT2305 when connecting to the itunes store i get a mess: (itunes has stopped working) all i can do is close the peogram. i was on the phoine with apple today over 2 hrs still cant fix it

    when connecting to the itunes store i get a mess: (itunes has stopped working) all i can do is close the peogram. i was on the phoine with apple today over 2 hrs still cant fix it. unistalled it 3x and in the proper order. reset all internet connection to default setting, turned off virus programs ect. Even the tech at apple by remote access couldnt fix it. use microsoft fix it also no good....\

    I am having the same problem now also. It happened after I updated my version. I have NEVER had this problem before as a windows user and have had iTunes for 5 years. So, I would have to say it is an Apple problem. I have not changed anything on my computer. I still have Internet Explorer and I have not even updated windows. The only thing I updated was iTunes. Now, I am not getting any response from Apple and if you call you have to pay for support. What a joke. An iPod costs $400 you would think that after paying that much you would at least get some type of help. This will now be the last time I ever by anything apple.

Maybe you are looking for

  • Macs & Open Networks

    Ok, I admit that I know very little about networking, and I'm sure someone will correct me if I'm wrong about any of this: There is an open wi-fi network on our installation, and PC users are not having a problem connecting to it. However, my MBP and

  • IPhone 4S Calendar Event Defaults to Incorrect Time Zone

    My iPhone, Win7 PC is set for Eastern Time. I use Outlook/Exchange and the Outlook calendar in Options is set for Eastern Time as well. I never had any issues until recently. My iPhone syncs with the Exchange server using ActiveSync. A few weeks ago

  • Compile WS client

    Hi all, I have problems to compile a web service client called Access.java. I coded it following the J2EE 1.4 Tutorial, chapter 8, section "Dynamic Proxy Client". I used wscompile to obtain the classes needed to connect: C:\Sun\jwsdp-1.6\jaxrpc\bin\w

  • How to do^ working with time dim and contracts dim/fact

    how to set physical and Bmm layers thera are Contracts entity with two dates: begin_date and end_date and Time entity with hierarchy YEAR to DAY and also two atributes FIRSTDAY_OF_YEAR and LASTDAY_OF_YEAR at detail level how to set physical and Bmm l

  • Update OS X 5.5 to 5.7

    Hi Is it possible to take my new mac into an istore to get the latest version of os put on it.My internet connection is slow.