DCOM errors on site server when connecting to site systems in remote untrusted domains
When the site component manager and sms executive is trying to access site systems in remote domains in untrusted forest i got a lot of events in the system log with event id 10028:
"DCOM was unable to communicate with the computer <computername> using any of the configured protocols; requested by PID 32a4 (D:\Program Files\Microsoft Configuration Manager\bin\x64\sitecomp.exe)."
"DCOM was unable to communicate with the computer <computername> using any of the configured protocols; requested by PID 2990 (D:\Program Files\Microsoft Configuration Manager\bin\x64\smsexec.exe)."
I have checked the sitecomp.log and smsexec.log for errors, but I can´t find anything wrong and everything seems to be working fine. I am using Site system installation account to connect to the site systems. Is this normal behavior?
Thanks
Markus Lindgren
kungcocos
Here's the answer from SA support:
Reason behind the errors in DCOM :The SCCM 2012 Server will always connect to all the MPs with the system account, and will use the console provided remote forest credentials only to run the MP
management.
Whenever we attempt a connection SCCM build a list of available accounts (Site System Installation Account
+ Machine Account) and loop through them attempting each option in turn. The machine account is always (as far as I know) a member of this list – if you don’t specify
a site system connection account then it will never connect if the machine account fails – but that’s not the same as saying specifying a site system connection account means we won’t try the machine account first.
So this is something "by design" and shouldn't cause any troubles to the SCCM systems.
Similar Messages
-
URGENT - INTERNAL SERVER ERROR when connecting to site
i'm getting INTERNAL SERVER ERROR when connecting to site. everything was ok till yesterday night but since today morning, nobody has been able to log in the site.
i looked at the Apache Listener log files in IAS_HOME/Apache/Apache/logs
the error_log file contained the following :-
[Fri Jan 26 08:32:04 2001] [error] [client 127.0.0.1] Invalid method in request ^A
[Fri Jan 26 08:32:05 2001] [error] [client 10.32.12.219] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/p
age
[Fri Jan 26 08:32:58 2001] [error] [client 127.0.0.1] Invalid method in request ^A
[Fri Jan 26 08:32:58 2001] [error] [client 10.32.12.219] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/I
sItWorking
[Fri Jan 26 08:33:13 2001] [error] [client 127.0.0.1] Invalid method in request ^A
[Fri Jan 26 08:33:13 2001] [error] [client 10.32.12.219] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/page
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
then i tried to kill all the httpd processes and restart the apache and the error log was populated with the following :-
[Fri Jan 26 09:35:48 2001] [warn] child process 16269 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16270 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16271 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16272 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16273 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16274 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16275 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16276 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16277 still did not exit, sending a SIGTERM
,same messages continue for different
,process ids followed by
Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
Attempt to free unreferenced scalar.
Attempt to free unreferenced scalar.
Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
[Fri Jan 26 09:35:53 2001] [error] child process 16269 still did not exit, sending a SIGKILL
[Fri Jan 26 09:35:53 2001] [error] child process 16270 still did not exit, sending a SIGKILL
[Fri Jan 26 09:35:53 2001] [error] child process 16271 still did not exit, sending a SIGKILL
[Fri Jan 26 09:35:53 2001] [error] child process 16272 still did not exit, sending a SIGKILL
[Fri Jan 26 09:35:54 2001] [error] could not make child process 16269 exit, attempting to continue anyway
[Fri Jan 26 09:35:54 2001] [error] could not make child process 16270 exit, attempting to continue anyway
[Fri Jan 26 09:35:54 2001] [error] could not make child process 16271 exit, attempting to continue anyway
[Fri Jan 26 09:35:54 2001] [error] could not make child process 16272 exit, attempting to continue anyway
[Fri Jan 26 09:35:54 2001] [error] could not make child process 16273 exit, attempting to continue anyway
[Fri Jan 26 09:35:54 2001] [error] could not make child process 16274 exit, attempting to continue anyway
[Fri Jan 26 09:35:54 2001] [notice] caught SIGTERM, shutting down
[Fri Jan 26 09:38:10 2001] [notice] Apache/1.3.12 (Unix) ApacheJServ/1.1 mod_perl/1.22 configured -- resuming normal operations
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
[Fri Jan 26 09:38:44 2001] [error] [client 127.0.0.1] Invalid method in request ^A
[Fri Jan 26 09:38:44 2001] [error] [client 10.32.1.81] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/pag
e
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
[Fri Jan 26 09:39:06 2001] [notice] caught SIGTERM, shutting down
[Fri Jan 26 09:39:30 2001] [notice] Apache/1.3.12 (Unix) ApacheJServ/1.1 mod_perl/1.22 configured -- resuming normal operations
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
[Fri Jan 26 09:42:17 2001] [error] [client 127.0.0.1] Invalid method in request ^A
[Fri Jan 26 09:42:17 2001] [error] [client 10.32.1.81] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/pag
e
Any ideas or suggestions anyone ....??
what could have possibly changed since yesterday to effect the site ??
any help would be greatly appreciated ...
nullA couple of questions:
1) Did you try shutting down apache with the sript?
2) When killing the httpd processes did you also kill the associated java processes?
null -
Error -36 alert displays when connecting to a Windows server
Hi All
I am getting error -36 when I tried to copy any file or folder from windows server
"Error -36 alert displays when connecting to a Windows server"
Even the file info is zero KB, while from other MAC machine it is right size.You shouldn't get the same error when you are doing it from Terminal. The error should be a little different. I just did a test. Is this a Microsoft 2003 server, 2000 or NT4 you are connecting to? Your post isn't specific. Make sure the System Preferences:Network:Advanced:WINS tab is filled in with the domain you are connecting to next to the "Workgroup" name. The WINS server should already be filled in. Open the connect window with command K. Type domainname\username for the login and then the password. If you don't want to enter the domain each time you will need to add the domain in the Applications:Utilities:Directory Uitility application.
If you are trying to connect to a Windows XP client box, the machine will automatically try to authenticate with the guest account not the username and password you are using even when "registered user" is ticked. You have to edit the registry to change this default. If the username from the Windows PC is the same as the user logon then this is why the PC is able to connect and the mac is not. -
Mac OS X 10.4: Error -36 alert displays when connecting to a Windows server
Mac OS X 10.4: Error -36 alert displays when connecting to a Windows server
http://docs.info.apple.com/article.html?artnum=301580
A user meet the above problem connecting to Windows 2003 server but have no this error if connected to Windows 2000 Server.
According to the above solution, will you configure Windows 2003 server or just configure user's Macintosh platform?EL2006 wrote:
Actually, win2003 server's default security options are shown as follows.
1. MS network client: Digitally sign communications (always) - Disabled
2. MS network client: Digitally sign communications (if server agrees) - Enabled
3. MS network server: Digitally sign communications (always) - Disabled
4. MS network server: Digitally sign communications (if client agrees) - Disabled
We could both be right on this one; it depends on your setup. By default, if you're running a domain then the Domain Controller is:
*Microsoft network client: Digitally sign communications (always) Policy Setting: not defined*
That defaults to the Group Policy setting, which is enabled.
The local computer group policy for Windows Server 2003 is:
*Microsoft network client: Digitally sign communications (always) Security Setting: disabled*
I'm referencing this KB article on Microsoft's website: <http://support.microsoft.com/kb/887429>.
This does not take into consideration that you may have upgraded from Windows 2000 Server to Windows Server 2003.
Regardless, you seem to have already eliminated this as a possibility as you mention below.
In my case, user can connect to win2003 server without problem in the same LAN 192.168.8.x. If connect it from remote lan 192.168.10.x (e.g. smb://192.168.8.250/artwork) error -36 will appear. Since remote lan is connected to local lan by secured VPN, all traffic or any ports are allowed to passe through VPN.
Rather than a server or client problem I would speculate your VPN connection is the problem. Do you have port TCP 445 open or blocked at your VPN concentrator? I believe this needs to be open.
Hope this helps!
bill -
SCCM Console Won't Connect to Site Server WMI Connection Issues
Ok, I've been scratching my head with this one for a while. We're running SCCM 2007 R3 in native mode, site server is Win 2008 Std R2, Config Mgr database sits on a seperate SQL box. When I launch the console (user account I use when logged into server
which is a member of SMS Admins group) on my Win 7 machine I receive the error..
The ConfigMgr console could not connect to the Config Mgr site database. Verify that this computer has network connectivity to the SMS Provider computer and that your user account has Remote Activation permissions on both the Config Mgr site server and SMS
Provider computers
I've read numerous articles around DCOM permissions, I can confirm have all been set on the site server and SMS Admins group has the Remote Activation permission checked. Also I can open WMI, select properties to view the WMI namespace structure, permissions
on the SMS folder and subfolders are set as per microsoft articles.
So then I launched wbemtest from my Win 7 machine, when I try and connect to
\\[SiteServer]\root\sms\Site_SiteCode. I receive WMI error below. I can however connect successfully to WMI on any other server
Number: 0x80070005
Facility: Win32
Description: Access is denied
When logged into SCCM Site server and open wbemtest I can't remotely connect using WMI to any server in our domain, each time receiving the error below.
Error
Number: 0x800706ba
Facility: Win32
Description: The RPC server is unavailable
Whilst logged onto the site server I can use wbemtest to connect to itself using the SMS Provider namespace(\\[SiteServer]\root\sms\Site_SiteCode) which would suggest the WMI isn't corrupt.
It appears that I can't connect remotely to or from this machine using WMI, that something is blocking or not allowing the connection maybe? Please note the Windows Firewall is disabled, we don't use any third party firewall software on our servers and
WMI service is started.
Any ideas or suggestions on this one would be most welcome.
CheersHi Eswar, thanks for the reply. This is the extract from the adminUI.log when I try and launch the console
[6][20/01/2012 10:24:21] :Insufficient privilege to connect, error: 'Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))'\r\nSystem.UnauthorizedAccessException\r\nAccess is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))\r\n
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.Connect(String configMgrServerPath)
at Microsoft.ConfigurationManagement.AdminConsole.SmsSiteConnectionNode.GetConnectionManagerInstance(String connectionManagerInstance)\r\n
[6][20/01/2012 10:24:21] :Microsoft.ConfigurationManagement.ManagementProvider.SmsConnectionException\r\nThe ConfigMgr Administrator console could not connect to the ConfigMgr site database. Verify your user has read permissions to the ConfigMgr site and then
try to connect again.
\r\n at Microsoft.ConfigurationManagement.AdminConsole.SmsSiteConnectionNode.GetConnectionManagerInstance(String connectionManagerInstance)
at Microsoft.ConfigurationManagement.AdminConsole.SmsSiteConnectionNode.BuildTreeWorker()\r\nAccess is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
\r\nSystem.UnauthorizedAccessException\r\nAccess is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))\r\n at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.Connect(String configMgrServerPath)
at Microsoft.ConfigurationManagement.AdminConsole.SmsSiteConnectionNode.GetConnectionManagerInstance(String connectionManagerInstance)\r\n
[8][20/01/2012 10:25:37] :Insufficient privilege to connect, error: 'Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))'\r\nSystem.UnauthorizedAccessException\r\nAccess is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))\r\n
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.Connect(String configMgrServerPath)
at Microsoft.ConfigurationManagement.AdminConsole.SmsSiteConnectionNode.GetConnectionManagerInstance(String connectionManagerInstance)\r\n
[8][20/01/2012 10:25:37] :Microsoft.ConfigurationManagement.ManagementProvider.SmsConnectionException\r\nThe ConfigMgr Administrator console could not connect to the ConfigMgr site database. Verify your user has read permissions to the ConfigMgr site and then
try to connect again.
\r\n at Microsoft.ConfigurationManagement.AdminConsole.SmsSiteConnectionNode.GetConnectionManagerInstance(String connectionManagerInstance)
at Microsoft.ConfigurationManagement.AdminConsole.SmsSiteConnectionNode.BuildTreeWorker()\r\nAccess is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
\r\nSystem.UnauthorizedAccessException\r\nAccess is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))\r\n at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.Connect(String configMgrServerPath)
at Microsoft.ConfigurationManagement.AdminConsole.SmsSiteConnectionNode.GetConnectionManagerInstance(String connectionManagerInstance)\r\n
[3][20/01/2012 10:25:48] :Failure while loading required 'WQL' query engine, console cannot connect -
ORA-28545: error diagnosed by Net8 when connecting to an agent
Dear all,
This question has been asked many times in this forum, and I have gone to many threads in this forum, but unfortunately i failed.
I want to connect to MySQL database from oracle. I have the following configurations.
Oracle database enterprise edition 12c (12.1.0.2.0) 64bit on Windows server 2012 64bit
i have MySQL 5.6.11 on windows 7 64bit
i have downloaded ODBC driver from oracle delivery site (MySQL Connector/ODBC 5.3.4 MSI for Windows x86 (64bit))
i install the ODBC on my oracle server, a full installation which install the Unicode and Ansi versions both.
i create ODBC connection for Unicode by going to Control Panel-->Administrator Tools-->ODBC Data Sources (64-bit)-->System DSN. i test it and the test was successful.
i configure my Listner.ora, Tnsname.ora and initmysql.ora files as below;
Listner.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = c:\app\Administrator\product\12.1.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:c:\app\Administrator\product\12.1.0\dbhome_1\bin\oraclr12.dll")
(SID_DESC=
(SID_NAME = mysql)
(ORACLE_HOME = C:\app\Administrator\product\12.1.0\dbhome_1)
(PROGRAM = dg4odbc)
(ENVS=LD_LIBRARY_PATH = C:\app\Administrator\product\12.1.0\dbhome_1\LIB)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = ORADEV.hct.org)(PORT = 1521))
Tnsnames.ora
PDBORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ORADEV.hct.org)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = pdborcl.hct.org)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = ORADEV.hct.org)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.hct.org)
mysql =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = N410FS02)(PORT = 1521))
(CONNECT_DATA =
(SID = mysql)
(HS = OK)
initmysql.ora ( C:\app\Administrator\product\12.1.0\dbhome_1\hs\admin\)
HS_FDS_CONNECT_INFO = mysql
HS_FDS_TRACE_LEVEL = OFF
then i stop and start the listener, the listener status is below
LSNRCTL for 64-bit Windows: Version 12.1.0.2.0 - Production on 23-APR-2015 09:16
:52
Copyright (c) 1991, 2014, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ORADEV.hct.org)(PORT=152
1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 12.1.0.2.0 - Produ
ction
Start Date 23-APR-2015 09:13:56
Uptime 0 days 0 hr. 2 min. 59 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File c:\app\Administrator\product\12.1.0\dbhome_1\network\a
dmin\listener.ora
Listener Log File c:\app\Administrator\diag\tnslsnr\ORADEV\listener\aler
t\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ORADEV.hct.org)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "mysql" has 1 instance(s).
Instance "mysql", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl.hct.org" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB.hct.org" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "pdborcl.hct.org" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
tnsping MySQL
TNS Ping Utility for 64-bit Windows: Version 12.1.0.2.0 - Production on 23-APR-2
015 09:17:54
Copyright (c) 1997, 2014, Oracle. All rights reserved.
Used parameter files:
c:\app\Administrator\product\12.1.0\dbhome_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = N410FS02
)(PORT = 1521)) (CONNECT_DATA = (SID = mysql)) (HS = OK))
OK (40 msec)
then i open sqlplus and connect to my pluggable database as sys user and create a public database link for the test schema which i already created in MySQL database.
create public database link mysql connect to test identified by test using 'mysql';
then i try the table1 which is in test schema in MySQL from sqlplus as below
SQL> select * from table1@mysql;
select * from table1@mysql
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from MYSQL
i have tried both the Ansi and Unicode versions of ODBC but the same issue.
where is the problem in my configuration?
Thank you.ODBC
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\ODBC]
[HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBC.INI]
[HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBC.INI\mysql]
"Driver"="C:\\Program Files\\MySQL\\Connector ODBC 5.3\\myodbc5w.dll"
"SERVER"="10.153.102.98"
"UID"="test"
"PWD"="test"
"PORT"="3306"
[HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBC.INI\ODBC Data Sources]
"mysql"="MySQL ODBC 5.3 Unicode Driver"
[HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI]
[HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI\MySQL ODBC 5.3 ANSI Driver]
"UsageCount"=dword:00000001
"Driver"="C:\\Program Files\\MySQL\\Connector ODBC 5.3\\myodbc5a.dll"
"Setup"="C:\\Program Files\\MySQL\\Connector ODBC 5.3\\myodbc5S.dll"
[HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI\MySQL ODBC 5.3 Unicode Driver]
"UsageCount"=dword:00000001
"Driver"="C:\\Program Files\\MySQL\\Connector ODBC 5.3\\myodbc5w.dll"
"Setup"="C:\\Program Files\\MySQL\\Connector ODBC 5.3\\myodbc5S.dll"
[HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI\ODBC Core]
"UsageCount"=dword:00000001
[HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI\ODBC Drivers]
"SQL Server"="Installed"
"Oracle in OraDB12Home1"="Installed"
"MySQL ODBC 5.3 ANSI Driver"="Installed"
"MySQL ODBC 5.3 Unicode Driver"="Installed"
[HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI\ODBC Translators]
[HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI\Oracle in OraDB12Home1]
"APILevel"="1"
"CPTimeout"="60"
"ConnectFunctions"="YYY"
"Driver"="c:\\app\\Administrator\\product\\12.1.0\\dbhome_1\\BIN\\SQORA32.DLL"
"DriverODBCVer"="03.51"
"FileUsage"="0"
"Setup"="c:\\app\\Administrator\\product\\12.1.0\\dbhome_1\\BIN\\SQORAS32.DLL"
"SQLLevel"="1"
[HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI\SQL Server]
"CPTimeout"="60"
"SQLLevel"="1"
"DriverODBCVer"="03.50"
"APILevel"="2"
"ConnectFunctions"="YYY"
"Setup"=hex(2):25,00,57,00,49,00,4e,00,44,00,49,00,52,00,25,00,5c,00,73,00,79,\
00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,00,71,00,6c,00,73,00,72,00,\
76,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,00,00
"UsageCount"=dword:00000001
"Driver"=hex(2):25,00,57,00,49,00,4e,00,44,00,49,00,52,00,25,00,5c,00,73,00,79,\
00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,53,00,51,00,4c,00,53,00,52,00,\
56,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,00,00
"FileUsage"="0"
Thanks -
Hello All,
I have verified entire otn community, but none of the solution working for me and hence posting this problem. I'm getting below error message when I try to connect from oracle 11g to sqlserver database. All details are given below and request some body to provide resolution.
Oracle 11 g server installed in "Red Hat Enterprise Linux Server release 6.3"
Sqlserver running in Windows server enterprise 64bit OS.
$ cat initdg4msql.ora
# This is a customized agent init file that contains the HS parameters
# that are needed for the Database Gateway for Microsoft SQL Server
# HS init parameters
HS_FDS_CONNECT_INFO=[SJCGNMWQA2WEB01]:SQLEXPRESS//msdb
# alternate connect format is hostname/serverinstance/databasename
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
$ cat listener.ora
# listener.ora Network Configuration File: /home/oracle/11g/product/11/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = dg4msql)
(ORACLE_HOME = /home/oracle/11g/product/11)
(PROGRAM = dg4msql)
$ cat tnsnames.ora
# tnsnames.ora Network Configuration File: /home/oracle/11g/product/11/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
GNMDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = sjcgnm62v2db1.skta.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = GNMDB)
dg4msql =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = sjcgnm62v2db1.skta.com)(PORT = 1521))
(CONNECT_DATA = (SID = msdb))
(HS = OK)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = sjcgnm62v2db1.skta.com)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
ADR_BASE_LISTENER = /home/oracle/11g
Output of lsnrctl start
$ lsnrctl start
LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 22-NOV-2013 15:17:08
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Starting /home/oracle/11g/product/11/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.2.0.3.0 - Production
System parameter file is /home/oracle/11g/product/11/network/admin/listener.ora
Log messages written to /home/oracle/11g/diag/tnslsnr/sjcgnm62v2db1/listener/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sjcgnm62v2db1.skta.com)(PORT=1521)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=sjcgnm62v2db1.skta.com)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.3.0 - Production
Start Date 22-NOV-2013 15:17:08
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /home/oracle/11g/product/11/network/admin/listener.ora
Listener Log File /home/oracle/11g/diag/tnslsnr/sjcgnm62v2db1/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sjcgnm62v2db1.skta.com)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
Services Summary...
Service "dg4msql" has 1 instance(s).
Instance "dg4msql", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
SQL> CREATE PUBLIC DATABASE LINK sqlserver CONNECT TO "sa" IDENTIFIED BY "gnm123" USING 'dg4msql';
Database link created.
SQL> select * from dual@sqlserver;
select * from dual@sqlserver
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from SQLSERVER
SQL> select * from "sys"."tables"@sqlserver;
select * from "sys"."tables"@sqlserver
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from SQLSERVER
Pl help.Hi Klaus,
I just pick the gateway 11.2.0.3 patch to the installation. Here I got error and patch installation failed.
[oracle@sjcgnm62v2db1 13092292]$ opatch apply
Invoking OPatch 11.2.0.1.7
Oracle Interim Patch Installer version 11.2.0.1.7
Copyright (c) 2011, Oracle Corporation. All rights reserved.
Oracle Home : /home/oracle/11g/product/11
Central Inventory : /home/oracle/oraInventory
from : /etc/oraInst.loc
OPatch version : 11.2.0.1.7
OUI version : 11.2.0.3.0
Log file location : /home/oracle/11g/product/11/cfgtoollogs/opatch/opatch2013-11-26_12-41-27PM.log
Applying interim patch '13092292' to OH '/home/oracle/11g/product/11'
Verifying environment and performing prerequisite checks...
Prerequisite check "CheckApplicable" failed.
The details are:
Patch 13092292: Required component(s) missing : [ oracle.rdbms.tg4db2, 11.2.0.3.0 ]
[ Error during Prerequisite for apply Phase]. Detail: ApplySession failed during prerequisite checks: Prerequisite check "CheckApplicable" failed.
Log file location: /home/oracle/11g/product/11/cfgtoollogs/opatch/opatch2013-11-26_12-41-27PM.log
Recommended actions: This patch requires some components to be installed in the home. Either the Oracle Home doesn't have the components or this patch is not suitable for this Oracle Home.
OPatch failed with error code 39
[oracle@sjcgnm62v2db1 13092292]$
Pl help. -
ORA-28545: error diagnosed by Net8 when connecting to an agent error
Hi,
I've to setup the Oracle Gateway service in order to access the SQL Server 2005 db from Oracle11g 11.1.0.7.0 db which is running on a LINUX os.
Basically, i've to periodically PULL data from SQL Server to oracle.
Have done the necessary setup as specified in Oracle docs.
1. Oracle ini file: initdg4msql.ora
HS_FDS_CONNECT_INFO=999.168.0.1:1433//SqlServerDb
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_RECOVERY_ACCOUNT=sqlserver_user_id
HS_FDS_RECOVERY_PWD=sqlserver_user_password
2. listener.ora entry
LISTENER_GATEWAY =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = oracle.portal.internal)(PORT = 1522))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = OBIM1)
(ORACLE_HOME = /app/oracle/product/11.1.0/db_1)
(SID_DESC =
(SID_NAME = dg4msql)
(ORACLE_HOME = /app/oracle/product/11.1.0/db_1)
(ENVS=LD_LIBRARY_PATH=/app/oracle/product/11.1.0/db_1/dg4msql/driver/lib;/app/oracle/product/11.1.0/db_1/lib)
(PROGRAM = dg4msql)
3. tnsnames.ora entry
dg4msql =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = tcp)(HOST = oracle.portal.internal)(PORT = 1522))
(CONNECT_DATA =(SID = dg4msql))
(HS = OK)
4. Create database link on oracle
create public database link sqlserver connect to "sqlserver_user_id" identified by "sqlserver_user_password" using 'dg4msql';
Database link created.
Upon the completion of the configuration, I did the following and all are successful and working:
- starting the listener by
lsnrctl start LISTENER_GATEWAY
- tnsping my gateway
tnsping dg4msql
However, when I tried to retreive data and got the following error:
SQL> desc myTestingTable@sqlserver;
ERROR:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from SQLSERVER
I have stepped through the doc of "How to Setup DG4MSQL (Oracle Database Gateway for MS SQL Server) Release 11" but unable to figure out where the error lies.
Any inputs on this?? please help, I am in urgent.Hi Mike,
As suggested, I have tried both formats with the spaces at the front. When I tried to start the listener, still get the error as show below:
Starting /app/oracle/product/11.1.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.1.0.7.0 - Production
System parameter file is /app/oracle/product/11.1.0/db_1/network/admin/listener.ora
Log messages written to /app/oracle/diag/tnslsnr/p1db01/listener_gateway/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle.portal.internal)(PORT=1522)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1522)))
TNS-01155: Incorrectly specified SID_LIST_LISTENER_GATEWAY parameter in LISTENER.ORA
NL-00305: the specified path name does not exist
As answers to your points -
- you have the HOST defined as -
(HOST = oracle.portal.internal)
is this the actual host name or did you change it to hide it in the post ?
*** It is just a mark up host for security reason
- what happens if you use the IP address instead of the hostname ?
*** Have tried the IP address but same error
- is the gateway installed in the directory /app/oracle/product/11.1.0/db_1 ?
*** Yes
- can you set up listener level 16 tracing and check the trace file for further information about the errors ? Add this to the listener.ora file -
trace_level_listener=16
and start the listener.
*** Have added the trace level 16 and tried to start the listener but same error. Please refer the snapshot from the log.xml. Please note that the host_id "oracle" is just a make-up.
<txt>Listener completed notification to CRS on start
</txt>
</msg>
<msg time='2010-04-17T15:37:56.544+10:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oracle'
host_addr='99.999.99.99'>
<txt>
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
</txt>
</msg>
<msg time='2010-04-17T15:37:56.545+10:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oracle'
host_addr='10.254.84.32'>
<txt>TNS-01155: Incorrectly specified SID_LIST_LISTENER_GATEWAY parameter in LISTENER.ORA
NL-00305: the specified path name does not exist
</txt>
</msg>
- I have repeated the same steps above by changing the SID_LIST_LISTENER_GATEWAY back to SID_LIST_LISTENER parameter in LISTENER.ORA
The listener can be started but back to square one with ORA-28545 error as show below:
SQL> desc myTestingTable@sqlserver;
ERROR:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from SQLSERVER
Thanks -
Once again - ORA-28545: error diagnosed by Net8 when connecting to an agent
I'm trying to connect to a SQL server 2012
I've make the ODBC connections (called MOFIBO2, MOFIBO3, MOFIBO4) and i've a succesfull connection to then SQL server.
The Oracle Database is:
Oracle Database 11g Release 11.2.0.3.0 - 64bit Production
I've made 3 versions of the initdg4odbc.ora and they all look the same:
# This is a sample agent init file that contains the HS parameters that are
# needed for the Database Gateway for ODBC
# HS init parameters
HS_FDS_CONNECT_INFO = MOFIBOx (MOFIBO2, MOFIBO3 and MOFIBO4)
HS_FDS_TRACE_LEVEL = off
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
My lisener.ora look like this:
# listener.ora Network Configuration File: C:\app\Administrator\product\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = resp-ora01)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(SID_DESC =
(ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)
(SID_NAME = RESPTEST)
(SID_DESC =
(SID_NAME=MOFIBO2)
(ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)
(PROGRAM = dg4odbc)
(SID_DESC =
(SID_NAME=MOFIBO3)
(ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)
(PROGRAM = dg4odbc)
(SID_DESC =
(SID_NAME=MOFIBO4)
(ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)
(PROGRAM = dg4odbc)
ADR_BASE_LISTENER = C:\app\Administrator\product\11.2.0\dbhome_1\log
And my mofibo part of then tnsnames.ora look like this (I've made three variants because different "manuals" uses different methods ):
MOFIBO2=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=TCP)(HOST=resp-ora02)(PORT=1521))
(CONNECT_DATA=
(SID=MOFIBO2)
(HS=OK)
MOFIBO3=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=TCP)(HOST=resp-ora02)(PORT=1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SID_NAME = MOFIBO3)
(HS=OK)
MOFIBO4=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=TCP)(HOST=resp-ora02)(PORT=1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MOFIBO4)
(HS=OK)
When tnsping to the three versions i get this:
C:\Users\Administrator>tnsping mofibo2
TNS Ping Utility for 64-bit Windows: Version 11.2.0.3.0 - Production on 24-APR-2014 12:48:17
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Used parameter files:
C:\app\Administrator\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=TCP)(HOST=resp-ora02)(PORT=1521)) (CONNECT_DATA= (SID=MOFIBO2)) (
HS=OK))
OK (10 msec)
C:\Users\Administrator>tnsping mofibo3
TNS Ping Utility for 64-bit Windows: Version 11.2.0.3.0 - Production on 24-APR-2014 12:48:23
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Used parameter files:
C:\app\Administrator\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=TCP)(HOST=resp-ora02)(PORT=1521)) (CONNECT_DATA = (SERVER = DEDIC
ATED) (SID_NAME = MOFIBO3)) (HS=OK))
OK (10 msec)
C:\Users\Administrator>tnsping mofibo4
TNS Ping Utility for 64-bit Windows: Version 11.2.0.3.0 - Production on 24-APR-2014 12:48:27
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Used parameter files:
C:\app\Administrator\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=TCP)(HOST=resp-ora02)(PORT=1521)) (CONNECT_DATA = (SERVER = DEDIC
ATED) (SERVICE_NAME = MOFIBO4)) (HS=OK))
OK (0 msec)
I created three database link with then following (username and password was in wright case):
create database link MOFIBODB2 connect to "<username>" identified by "<password>" using 'MOFIBO2';
create database link MOFIBODB3 connect to "<username>" identified by "<password>" using 'MOFIBO3';
create database link MOFIBODB4 connect to "<username>" identified by "<password>" using 'MOFIBO4';
when i was trying to select from a table (select * from customers@<DATABASELINKHERE>) i get the errors (substitute MOFIBO2 with MOFIBO3/4 and same error occours):
SQL> select * from customers@MOFIBODB2;
select * from customers@MOFIBODB2
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from MOFIBODB2
What is my mistake?Hi,
In the listener.ora you have the host as -
(HOST = resp-ora01)
but in the tnsnames.ora entries you have -
(HOST=resp-ora02)
The tnsnames.ora host must be the same as the listener host.
Unless you have a listener running on resp-ora02 it isn't clear why the tnsping returns a result.
Change the host in the tnsnames.ora and let us know what happens.
Regards,
Mike -
Error : ORA-28545: error diagnosed by Net8 when connecting to an agent
I try to connect my Oracle 11.2 database to SQL server 2012. I installed Oracle Gateway on a window 2012 R2 and followed Oracle Gateway configure instruction.
Here is the initdg4msql.ora
# HS init parameters
HS_FDS_CONNECT_INFO=ctmcsql2012.dot.state.co.us:1433/CTMCSQLSVR12/external
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_TRANSACTION_MODEL=READ_ONLY
HS_DB_NAME=external
HS_DB_DOMAIN=ITS.DOT.STATE.CO.US
LISTENER.ORA
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME=PLSExtProc)
(ORACLE_HOME=D:\product\11.2.0\tg_1)
(PROGRAM=extproc)
(SID_DESC =
(SID_NAME=dg4msql)
(ORACLE_HOME=D:\product\11.2.0\tg_1)
(PROGRAM=dg4msql)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = CTMCSQL2012.dot.state.co.us)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
ADR_BASE_LISTENER = D:\product\11.2.0\tg_1
TNSNAMES.ORA
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
dg4msql.its.dot.state.co.us =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ctmcsql2012.dot.state.co.us)(PORT=1521))
(CONNECT_DATA=
(SID=dg4msql))
(HS=OK)
lsnrctl status output:
PS D:\product\11.2.0\tg_1\bin> lsnrctl status LISTENER
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 23-APR-2015 14:26:54
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=CTMCSQL2012.dot.state.co.us)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Start Date 21-APR-2015 16:00:11
Uptime 1 days 22 hr. 26 min. 42 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File D:\product\11.2.0\tg_1\network\admin\listener.ora
Listener Log File d:\product\11.2.0\tg_1\diag\tnslsnr\CTMCSQL2012\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=CTMCSQL2012.dot.state.co.us)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "dg4msql" has 1 instance(s).
Instance "dg4msql", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
I copied TNS entry to the database TNSNAMES.ora and created a DB link and get error:
CREATE DATABASE LINK "EXTERNAL.ITS.DOT.STATE.CO.US@CODOT"
CONNECT TO "CoDOT"
IDENTIFIED BY <PWD>
USING 'dg4msql.its.dot.state.co.us';
Link : "EXTERNAL.ITS.DOT.STATE.CO.US@CODOT"
Error : ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from EXTERNAL@CODOTCheck if this helps you - https://community.oracle.com/thread/466786
Pradeep -
it tells me that there's an error on the server when i enter my password. what can i do???
This is not an issue with Firefox, your message actually confirms this by the error you listed. "There was an error on the server" Firefox is only an internet browser basically, the connection to the internet & such local configuration is outside external from Firefox, the server is on the host side of the connection. It sounds like you have a bad connection between the server & your computer which Firefox has nothing to do with, rather it is your local network. I would actually check out Windows 7 VPN support, you need to setup a virtual private network VPN which is basically a secure connection stable enough to support the bandwidth required to facilitate the meeting.
This is why you are also having the problem with Internet Explorer as you need to correctly configure a VPN connection via windows if your connection supports it. -
Hello,
I don't think it is possible, but my goal is to start a discussion about content libraries and maybe suggest something for a future release or version of Configuration Manager.
Actually, based on Configuration Manager Technet documentation, Configuration Manager creates a content library on each site server and on each distribution point.
Often, when designing the architecture, people will offload the distribution point role from the site server to an external server (and add the role to other servers too for redundancy). They could also do the same for the Management Point role, but this
is not related to content library. The idea is to save the site server from having to deal with clients for software distribution (applications, software updates, OS, etc.), this is especially true for organizations having a large number of clients and/or
primary site servers involved in a hierarchy. Doing so will allow more resources on the site server to deal with the database and also replication in the case of a hierarchy.
When doing that, you still have to maintain a content library on the site server and the thing is this library will usually become huge, especially for organizations having more than 1000 applications (add also OS images to this). Will the content library
on the site server become as huge as the one for a distribution point having a copy of all content? I guess the answer is yes.
I know that Pull distribution points will help offloading the task from the site server to distribute content to distribution points, but, correct me if I'm wrong, you still have to maintain a content library on the site server when using them, and they
will not make the content library smaller on the site server. Also, I don't like the fact that you lose the rate limits feature with Pull DPs, but this is another story.
Storage cost is high and in this scenario, it hurts to have to pay this cost for a content library not used by the clients, but only to distribute content to DPs.
Correct me if I'm wrong, but the key component here is Distribution Manager on the site server; this is the one which has to maintain a content library to do its job.
It would be nice if we could have a way to elect a specific distribution point (not on the site server) as the Distribution Manager for a site, that main DP would hold a copy of all content by default, but would be used to distribute content to other DPs
and avoid the content library on the site server. Said differently, the Distribution Manager component would become a site system role that could be transferred outside the site server.
Tnx for comments, answers or suggestions.
PatrickThere is no way to avoid that the contentlib will be placed on the site server.
I don‘t agree that storage cost is high. It might be true for fast storage, but that‘s not needed for it.
Torsten Meringer | http://www.mssccmfaq.de -
Hello,
I have a RD farm using 3 Win 2012 servers (1 broker and 2 session host), for internal use only, have not
configured gateway for internet access.
Users are able to connect to RD farm website and remote into terminal server, within office
but can only connect to RD farm website and cannot remote into terminal server , when connected via VPN
Its takes long time at securing connection and fails.
ThanksHi,
Thank you for your posting in Windows Server Forum.
First of all I would suggest you to configure RD gateway role on your server and pass all the connection through it because it’s a best practice to use RD Gateway in RDS Farm.
Apart from this, if you are not using RD Gateway then you must check that you have successfully forwarded port 3389 for RDS to access via VPN. Also check that you have made configuration under IIS Manager to enable Forms Authentication. Please check
this link.
In addition, please refer beneath article for additional details.
1. How to Access Windows Remote Desktop Over the Internet
2. Remote Desktop Services in Windows 2008 R2 – Part 3 – RD Web Access & RemoteApp
(For reference)
Hope it helps!
Thanks,
Dharmesh -
The error also has "to repair the configuration, follow steps for repairing dpm from DPM setup help ID: 3001
I tried the solution outlined here:
http://social.technet.microsoft.com/Forums/en-US/8be919ee-f358-47a4-9cc3-d23eb05d3f18/system-center-2012-r2-dpm-smtp-issue-reporting-services-server-cannot-connect-to-the-dpm?forum=dataprotectionmanager
and also the graphical depiction here: http://www.ms4u.info/2014/01/reporting-services-server-cannot.html
I tried these steps, but everytime i try to change it, it tells me:
"The permissions granted to user 'domain\userid' are insufficient for performing this action rsaccessdenied..
Nothing seems to work..
I thought if i went into sql management studio and made sure my userid had admin rights to the db it would work.. but i cant change it there (via integrated security).. i believe i need to login as SA, but i dont recall the password for SA, though it appears
i can change the SA password from within sql management studio.. i'm unsure if doing so will break DPM though or is even needed to fix the reporting integration issue..
Any thoughts on this?
Thanks
Tech, the Universe, Everything: http://tech-stew.comUsing:
data source="servername\MSDPM2012";persist security info=False;initial catalog=DPMDB
I used the domain sqlservice account and test connection was ok.
However.. accessing reports still crashes in the MMC
Tech, the Universe, Everything: http://tech-stew.com
When i recreated the db.. i called it Reporting2 or similiar..
Then the reports folder i created called "Reports Folder"
Then datasource name "reports datasource"
The issue here is that the DPM reports in the reporting web interface are gone, since this is a new DB.. how do i redeploy them
Tech, the Universe, Everything: http://tech-stew.com
i went back into the sql reporting services area.. hit change db.. chose the original .. then back to the url.. went to the OLD reporting services folder and datasource.. added the connect string and now reporting area works.. so does scheduling..
Problem now solved
Tech, the Universe, Everything: http://tech-stew.com
Oops spoke too soon.. the first time i set it to do "status" as a schedule.. it seemed to work (clicked ok, no error).. went back and added an email notification..
Now i'm getting.. "an error occurred causing the reporting job to fail" "system files may be corrupt".
Seems to only occur if i try to add the email address portion
Tech, the Universe, Everything: http://tech-stew.com
rechecked the datasource.. i think there was an error in the connect string.. now everything seems to be working.. email notifications and all.
Tech, the Universe, Everything: http://tech-stew.com -
'Cannot obtain error message from server' when trying to use ODBC
Post Author: Grant C
CA Forum: Data Connectivity and SQL
Hi, I'm developing some reports using Crystal XI on my local PC, using an Oracle 10i back end on a separate server. The SQL for the report is in a method in an oracle package.
When I set the datasource location, selecting 'Oracle Server' then entering the details works fine, and the report runs. However, when I try to use an ODBC connection I get the following error:
Database Connection Error: 'Cannot obtain error message from server.'
The ODBC link is set up as a System DSN, which works fine when I test it. I think I need to use ODBC as some of the reports (which I inherited) seem to fail when run on the Crystal Server, and it seeme to be the ones set up with ODBC which work.
Any thoughts? Thanks.Hi Mars-
It sounds like your NI-DAQ installation may have become corrupted. I would suggest uninstalling and reinstalling the DAQmx 7.4 driver to correct this problem and ensure that you're up to date. This download is available here: NI-DAQ 7.4
If the problem persists you may want to uninstall and reinstall LabVIEW and then NI-DAQ in that order. The error message will usually give an indication as to which VI the error occurred in. Please let us know which VI is failing if you're unable to avoid the error with these suggestions.
Have a good day-
Tom W
National Instruments
Maybe you are looking for
-
Center Header Data in TableView
Hi, I would like to center the data in my Column Names (Header). The Column Name gets its values from the database, the data is not hardcoded. <b>Is it possible to center Column Name (header) Values.</b> At present my code centers all the data in the
-
Custom conditions for Import PO
All SAP Gurus, Which are the condition types to be used for customs in case of import PO. Among these conditions, which are to be loaded on material. Please help. Regards,
-
when I try to sign in foxfire keeps putting in the wrong saved username and won't overwrite it when I put the correct one in. How do I delete it for the sight nomorerack?
-
Not opening approval decision report
Hi, I am try to open the Approval decission report at approval procedures in Administrator module for all clint user and master user, but it is not opening (No matching records are found drafts "(ODRF)") and this error appearing in the screen so plea
-
Cs3 problem installing on Macbook Air
I am tring to install my copy of CS3 onto a new Macbook Air running OS X 10.8.2 I get this error message soon after starting the install. "Setup has encountered an error and cannot continue. Contact Adobe Customer Support for assistance". I have trie