AS - all page items, access not allowed
I am upgrading an AppleScript from working with InDesign CS5.5 to CS6. When I recompile I get the syntax error:
"Can't set <<constant dpvtdppv>> to <<class aPgi>>.
Access not allowed."
My statement is a simple
"set pList to get all page items" within a tell myDoc section.
In reviewing the AS guide for InDesign CS6, the notes say that Chapter 4, covering all page items, was not changed in CS6. Page 113 of the guide phrases the statement without a "get", so my statement would be
"set pList to all page items". This fails with the same error. As my code gets plenty of use under CS5 and CS5.5, I suspect a dictionary error from Adobe.
Anyone with ideas?
G'day
try :
set pList to every page item
m.
Similar Messages
-
BB Pearl 8130 "access not allowed!" when trying to download Blackberry App World
Hi, well I am trying to download blackberry app world onto my blackberry pearl 8130 and whenever I try to download it it goes through the language prompts but then goes to a page with "access not allowed" My device software is v4.5, I am currently in Canada, I have the data plan, I can use the internet browser and my carrier is Telus. All help is appreciated, please and thank you!
Hi and Welcome to the Forums!
"Access Not Allowed"? Is that the precise and exact message? If not, please do provide the precise message.
Please check this page to ensure you meet the minimum requirements (including if it is available in your country):
http://na.blackberry.com/eng/services/appworld/download.jsp
If it is available in your country and you feel you meet the device-level system requirements, then contact your carrier to ensure that you meet the service plan (from them) requirements for access (via their network) to AppWorld. Generic data plans, even unlimited, are usually not sufficient...a specific BB data plan is normally required.
Lastly, do be aware that AppWorld is merely a portal, vending apps developed mainly by others. As such, it is not your exclusive procurement source -- there are others that you can try (e.g., Handango, Handmark, BPlay, GetJAR or Mobihand). I have found that there are very few apps that are exclusive to AppWorld. You can search the on-line catalog and then search out other procurement sources, including quite often the developer website itself.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Page items do not go into Excel when exporting
We are using 10.1.2 viewer and plus (and I have the desktop version available). I have tried exporting a worksheet with page items using all 3 of the above and the page items will not go into excel. Is there any trick to get this to work? I thought that it used to work in older versions?
thanks
AngieDid you try the Export to Excel as Pivot Table option? That would create a base sheet with all the page items flattened out, a static sheet that looks like the worksheet at the time of the export, and an Excel Pivot Table where you can page through the page items.
thanks
Abhinav
Oracle Business Intelligence Product Management
BI - http://www.oracle.com/bi
BI - http://www.oracle.com/technology/bi
Blog - http://blogs.oracle.com/
BI Blog - http://oraclebi.blogspot.com/ -
Weblogic 7.0, Oracle9i - "Access not allowed" error
All:
I am looking for any suggestions/help/advice/etc on my problem. The background is this, I have an application that uses 3 MDBs, 3 Entity Beans, is deployed on Weblogic7.0 (the latest), and needs to query an Oracle9i database.
I have set up my drivers and URL, they work fine under a normal java class making a connection. They also return "success" when using dbping to test the connection, so the set up is right.
When Weblogic starts, the connection pool is made, the DataSource is fine -- but when the EJB is deployed it comes back with the SQLException "Access not allowed".
I've put the classes12.zip file at the beginning of the classpath, modified the setenv.cmd file so the PATH includes %ORACLE_HOME%\bin and %WL_HOME%\bin\oci920_8.
I've also put in the following in the weblogic-ejb-jar file:
<security-permission>
<description>Oracle</description>
<security-permission-spec>
grant {
permission java.lang.RuntimePermission "loadLibrary.ocijdbc9";
</security-permission-spec>
</security-permission>
I've even tried to do what the Security Manager portion of the Weblogic documentation says to do. It said to "activate the security manager" by putting the following line in the startWeblogic file:
-Djava.security.manager
None of these have worked -- I keep getting that error. Like I said previously I have tried the connections and they have worked through other methods.
I've tried everything, including using an XA driver -- to no avail. My forehead is getting really sore from banging it on the monitor --- can you help???? :/
Thanks!
The connection pool information follows (from the config.xml file):
<JDBCConnectionPool CapacityIncrement="1"
DriverName="oracle.jdbc.driver.OracleDriver" InitialCapacity="1"
LoginDelaySeconds="1" MaxCapacity="36" Name="P3IConnectionPool"
Properties="user=EI_SERVICES;password=EI_SERVICES;dll=ocijdbc9;protocol=thin"
RefreshMinutes="0" Targets="beaserver"
TestConnectionsOnReserve="true" TestTableName="STATE_LKUP" URL="jdbc:oracle:thin:@192.168.23.45:1521:ORASUN"/>Just in case anyone needs this in the future....
After creating the connection pool in Weblogic 7.0 (using the Weblogic console) right click on the connection pool and select "Define Policy", select "Default Authorizer", then enter "Caller is a member of the group everyone" and apply.
That takes care of the problem... didn't happen in Weblogic 6.1 -
[AS CS3] Bug? All Page Items - grouped items w labels
Can anyone confirm this behaviour for me. I would classify it as a bug, but maybe the logic for it not being a bug escapes me.
The command "all page items" is supposed to return a (flat) list of every page object, right? I would suspect that I should be able to address any object in the list. But I can only seem to address an object when it's inside of a group.
I am trying to get the text of a text frame that has a label. It may or may not be inside a group. I can certainly do a try/error block to try a script statement for objects in a group or not in a group. But I think that "all page items" should be able to handle it directly.
Here's a test script: ------
tell application "Adobe InDesign CS3"
tell document 1
get label of all page items
set myUngrouped to contents of text frame "some label" --only works when objects ungrouped, this is expected
set myText to (get contents of text frame "some label" of all page items)
--both statements work ONLY when objects grouped
set myText to (get contents of every page item of all page items whose label is "some label")
end tell
end tell
Steps:
Make a new document.
Draw a text frame. Type some text into it.
Label the frame "some label".
Draw another empty graphic or text frame.
Run script
-->result is, myText statements error out. Why is this?
Now group all items on page.
Run script.
-->result is, myUngrouped can't continue. This is expected.
Comment out myUngrouped statement
Run script.
-->result is, myText statements work OK.On 19/8/08 1:14 AM, "SuperMacGuy" <[email protected]> wrote:<br /><br />> set myText to (get contents of every page item of all page items whose label<br />> is "some label") <br /><br />The syntax is a bit tricky. The key is that all page items returns a list,<br />so what you want is certain items -- not page items -- from that list. So:<br /><br />set myText to (every item of all page items whose label is "some label")<br /><br /><br />-- <br />Shane Stanley <[email protected]>
-
I have a discover report that uses 'Page Items' and summarizes the results. I would like to include an All on my Page Items which would allow me to display all of the page items summarized together. Is this possible in Discover or do I need to use Oracle Reports or Forms?
John
nullin 4i, All is supported for Crosstabs. Pierre
null -
SQLException: Access not allowed (problem with ACL)
Hi, I'm getting the following error when I start my Weblogic (7.0) server.
java.sql.SQLException: weblogic.common.ResourceException: Access not allowed
I followed these steps to Provide the necessary ACl permisiions:
1. Compatibility Security => ACLs
Create a new ACL:
name : weblogic.jdbc.connectionPool.yourPoolname
permission : admin
group : Administrators
2. Create a new Connection Pool:
ACL Name : weblogic.jdbc.connectionPool.yourPoolname
In 'Target' tab, choose server and click the Apply button.
I even checked fileRealm.properties, the user admin123 (the user name with which I start the server), is included in all the connectionpool ACL lists. I restarted the server to pick the new changes but it still gives the same errors.
Please help,
ThanksYou need to create the correct ACL for the DataSource following this procedure in the Administration Console:
1. Compatibility Security => ACLs
Create a new ACL:
name : weblogic.jdbc.connectionPool.yourPoolname
permission : admin
group : Administrators
2. Compatibility => click Refresh button
3. Services => JDBC => Connection Pool
Create a new Connection Pool:
ACL Name : weblogic.jdbc.connectionPool.yourPoolname
In 'Target' tab, choose server and click the Apply button.
4. Services => JDBC => Data Sources
You can create a new Data Source using this connection pool successfully
Regards,
Prasanna Yalam -
I am using WLS7 with SP1.
I just recently migrated from WLS6.0. When my code tries to grab a
connection from the pool, it throws an exception
java.sql.SQLException: Pool connect failed:
weblogic.common.ResourceException: Access not allowed
at weblogic.jdbc.pool.Driver.connect(Driver.java:202)
Does anyone know if anything changed from 6.0 to 7?
Here is a piece of the code that throws exception.
Driver driver =
(Driver)Class.forName("weblogic.jdbc.pool.Driver")
.newInstance();
conn = driver.connect("jdbc:weblogic:pool:" +
dbName, null);
Thanks in advance.Hi Jung,
"Jung Yang" <[email protected]> wrote in message
news:[email protected]...
Do you know how to change security setting on the connection pool?
Thanks.WebConsole:
1.Compatibility Security => ACLs
Create a new ACL,
name : weblogic.jdbc.connectionPool.yourPoolname
permission : reserve, reset
group : everynone
2.Services => JDBC => Connection Pool
Create a new Connection Pool
ACL Name : weblogic.jdbc.connectionPool.yourPoolname
In 'Target' tab, choose server and click the Apply button
Slava
>
"Slava Imeshev" <[email protected]> wrote in message
news:[email protected]...
Hi Jung,
Could you try providing weblogic user name and password
in the properties?
Could you also check security setting of the connection pool?
Regards,
Slava Imeshev
"Jung Yang" <[email protected]> wrote in message
news:[email protected]...
Well that is exactly what I am doing. The variable dbName is database
connection pool name that I created in weblogic console. Again, it
worked
in WLS6 but after migration, it stopped working.
Thanks.
"Mitesh Patel" <[email protected]> wrote in message
news:[email protected]...
In my code I am supplying name of the connection pool already
created
in
weblogic server. I am asking you to get connection from the pool
using
pool
driver.
In your case you are trying to create connection straight to
database
using pool
driver.
What I am asking is pass name of the connection pool instead of
database
name.
Thanks,
Mitesh
Jung Yang wrote:
What would be the difference between your code and mine? Mine
simple
appends dbName string value for connection pool name at the end of
"jdbc:weblogic:pool:"? And why same exact code would work in WLS6and
not
work in WLS7?
Thanks.
"Mitesh Patel" <[email protected]> wrote in message
news:[email protected]...
conn = driver.connect("jdbc:weblogic:pool:" +
dbName, null);Instead of doing this what if you use
Connection conn =
myDriver.connect("jdbc:weblogic:pool:myConnectionPool", null);
Will you please try this and see if that helps?
Mitesh
Jung Yang wrote:
Isn't that exactly what I posted for my code piece?
Thanks.
"Mitesh Patel" <[email protected]> wrote in message
news:[email protected]...
Try As described below:
The following example demonstrates how to use a database
connection
pool
from a servlet.
Load the pool driver and cast it to java.sql.Driver. The
full
pathname
of
the driver is weblogic.jdbc.pool.Driver. For example:
Driver myDriver = (Driver)
Class.forName("weblogic.jdbc.pool.Driver").newInstance();
Create a connection using the URL for the driver, plus
(optionally)
the
name of the registered connection pool. The URL of the pool
driver
is
jdbc:weblogic:pool.
You can identify the pool in either of two ways:
Specify the name of the connection pool in a
java.util.Properties
object
using the key connectionPoolID. For example:
Properties props = new
Properties();props.put("connectionPoolID",
"myConnectionPool");Connection conn =
myDriver.connect("jdbc:weblogic:pool", props);
Add the name of the pool to the end of the URL. In this case
you
do
not
need a Properties object unless you are setting a username
and
password
for using a connection from the pool. For example:
Connection conn =
myDriver.connect("jdbc:weblogic:pool:myConnectionPool",
null);
Note that the Driver.connect() method is used in theseexamples
instead of
the DriverManger.getConnection() method. Although you may
use
DriverManger.getConnection() to obtain a databaseconnection,
we
recommend
that you use Driver.connect() because this method is not
synchronized
and
provides better performance.
Note that the Connection returned by connect() is an
instance
of
weblogic.jdbc.pool.Connection.
Call the close() method on the Connection object when youfinish
with
your
JDBC calls, so that the connection is properly returned to
the
pool. A
good coding practice is to create the connection in a try
block
and
then
close the connection in a finally block, to make sure the
connection
is
closed in all cases.
conn.close();
Mitesh
Jung Yang wrote:
I am using WLS7 with SP1.
I just recently migrated from WLS6.0. When my code tries
to
grab a
connection from the pool, it throws an exception
java.sql.SQLException: Pool connect failed:
weblogic.common.ResourceException: Access not allowed
at
weblogic.jdbc.pool.Driver.connect(Driver.java:202)
Does anyone know if anything changed from 6.0 to 7?
Here is a piece of the code that throws exception.
Driver driver =
(Driver)Class.forName("weblogic.jdbc.pool.Driver")
.newInstance();
conn =
driver.connect("jdbc:weblogic:pool:"
+
dbName,
null);
>>>>>>>>>
Thanks in advance. -
I set up my wifi, and when I go to the browser, I can go to Google and other websites correctly. When I tried to download app world, I got the message "Access not allowed". When I pressed the return key, it said my download was successful, but app world is not downloaded on my phone.
My brother and sister have the same phone, and they were able to download app world with no problems.
Anyone know how to fix this?I didn't mean to steal your thunders. LOL :-D No worries there friend. Hey... I at least got a helpful... whatever that amounts to in these new forums how is the bike riding, have you learn to breath yet?Haven't actually gotten to do any riding yet. So far I've been clearing my mind the old fashioned way. I've been "footing it" everywhere. Still does the same job though. Allows me a chance to clear my mind and get some exercise at the same time.
The only reason I haven't been riding yet is my bike still needs some more TLC before it'll allow me a ride without stranding me somewhere. Guess that's what I get for leaving it outside in Florida for 3 years. Plan on looking at it some more tomorrow and I should have it fixed then so I can get to riding! I've so been looking forward to getting back into it!!!
There is something really odd with ASI definitely agree.
You've got the right idea about how to handle the inconsistencies though. Treat it as though it's a three year old and hold its hand all the way through every little step!
Good to hear from you, hope all is going well in your part of the world! I'm slowly getting my self back and it's such a strange, but good, feeling! -
"Access not allowed for subject: principals=[]" Common Issue with no Repose
Hi all,
When upgrading from 8.1 to 8.1 SP4 (we have seen the issue as early as SP2), there is an exception thrown when trying to start the server where our application is deployed:
<pre>weblogic.management.NoAccessRuntimeException: Access not allowed for subject: principals=[], on ResourceType: Application Action: write, Target: Deployed
</pre>
Our application creates an InitialContext using properties from a standard properties file, and when the "java.naming.security.principal" and "java.naming.security.credentials" properties are omitted, the server will start and deploy the application, but it naturally will not work.
I have noticed that this issue has been brought up by several others:
http://forums.bea.com/bea/search.jspa?q=%22Access+not+allowed+for+subject%3A+principals%3D%5B%5D%22&objID=&dateRange=all&userID=&numResults=15
http://forums.bea.com/bea/thread.jspa?forumID=2058&threadID=200027601&messageID=200619947#200619947
http://forums.bea.com/bea/thread.jspa?forumID=2051&threadID=200021662&messageID=200590642#200590642
http://forums.bea.com/bea/message.jspa?messageID=200590569&tstart=0
But have seen nothing resembling even a hint of a cause.
Any suggestions that even get me going in the right direction would be appreciated.
<pre>
weblogic.management.NoAccessRuntimeException: Access not allowed for subject: principals=[], on ResourceType: Application Action: write, Target: Deployed
at weblogic.management.internal.SecurityHelper$IsAccessAllowedPrivilegeAction.wlsRun(SecurityHelper.java:623)
at weblogic.management.internal.SecurityHelper$IsAccessAllowedPrivilegeAction.run(SecurityHelper.java:510)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.management.internal.SecurityHelper.isAccessAllowed(SecurityHelper.java:398)
at weblogic.management.internal.RemoteMBeanServerImpl.private_setAttribute(RemoteMBeanServerImpl.java:430)
at weblogic.management.internal.RemoteMBeanServerImpl.setAttribute(RemoteMBeanServerImpl.java:387)
at weblogic.management.internal.MBeanProxy.setAttribute(MBeanProxy.java:741)
at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.java:475)
at weblogic.management.configuration.ApplicationMBean_Stub.setDeployed(ApplicationMBean_Stub.java:408)
at weblogic.management.mbeans.custom.ApplicationManager.setState(ApplicationManager.java:593)
at weblogic.management.mbeans.custom.ApplicationManager.startConfigManager(ApplicationManager.java:740)
at weblogic.management.mbeans.custom.ApplicationManager.start(ApplicationManager.java:501)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:754)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:733)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:509)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1560)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1528)
at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeanServerImpl.java:988)
at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:946)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:954)
at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.java:481)
at weblogic.management.configuration.ApplicationManagerMBean_Stub.start(ApplicationManagerMBean_Stub.java:677)
at weblogic.management.Admin.startApplicationManager(Admin.java:2821)
at weblogic.management.AdminServerAdmin.startApplicationManager(AdminServerAdmin.java:624)
at weblogic.management.Admin.finish(Admin.java:2299)
at weblogic.management.AdminServerAdmin.finish(AdminServerAdmin.java:458)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:971)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
at weblogic.Server.main(Server.java:32)
</pre>For others who have received this error, I'll post what I think has turned out to be the cause.
Refer to
http://e-docs.bea.com/wls/docs81/jndi/jndi.html#471919
Which says:
=====
When you create a JNDI Context with a username and password, you associate a user with a thread. When the Context is created, the user is pushed onto the context stack associated with the thread. Before starting a new Context on the thread, you must close the first Context so that the first user is no longer associated with the thread. Otherwise, users are pushed down in the stack each time a new context created. This is not an efficient use of resources and may result in the incorrect user being returned by ctx.lookup() calls.
=====
Our application caches the Context created, and that Context is used by other objects to perform lookups. Prior to Sp2, this caused no issues when including the username and password as part of the properties passed to the InitialContext constructor.
I presume that closing the Context after it has been used would be the proper fix for this, but right now this Context is used in too many places once it is created. I was able to combat the issue by removing the username and password properties (java.naming.security.principal & java.naming.security.credentials) from the properties file. It seems to work as expected. -
I am trying to use photomerge compose. I open one standard jpeg image and one image that is my business logo in a png format. When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from it. It has worked in the past but I downloaded the update today and photomerge will not work correctly. Any ideas?
hedger,
How do you expect anyone to help when we don't know a darned thing about the file, abut your setup, exact version of Photoshop and your OS, machine specs, etc.?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
[AS] Change Colour of all page items on layer
Hi
I am trying to set up a script to change the colour of fill, stroke and text of page items on one layer, and having very little luck, what I have so far is below, as it stands I seem to only be creating the swatch, could I get a few pointers on how to do this correctly please?
I have three attempts as below, which return pretty much the same result, nothing?
(1)
tell application "Adobe InDesign CS3"
set myDocument to active document
activate
tell document 1
try
set _Swatch to make color with properties {name:"PANTONE Blue 072 U", color:spot, color value:{100, 88, 0, 5}, model:spot}
set _NewColour to swatch "PANTONE Blue 072 U"
set swatch _NewColour to every page item whose fill color is swatch "Black"
set swatch _NewColour to every page item whose stroke color is swatch "Black"
end try
end tell
end tell
(2)
tell application "Adobe InDesign CS3"
set myDocument to active document
activate
tell document 1
try
set _Swatch to make color with properties {name:"PANTONE Blue 072 U", color:spot, color value:{100, 88, 0, 5}, model:spot}
set _NewColour to swatch "PANTONE Blue 072 U"
set _Colour to swatch "Black"
set _Fill to every page item whose fill color is swatch "Black"
set _Fill to _NewColour
set _Stroked to every page item whose stroke color is swatch "Black"
set _Stroked to _NewColour
end try
end tell
end tell
(3)
tell application "Adobe InDesign CS3"
set myDocument to active document
activate
tell document 1
try
set _Swatch to make color with properties {name:"PANTONE Blue 072 U", color:spot, color value:{100, 88, 0, 5}, model:spot}
set _NewColour to swatch "PANTONE Blue 072 U"
set _Colour to swatch "Black"
set _Fill to every page item whose fill color is swatch "Black"
set _Stroked to every page item whose stroke color is swatch "Black"
set _All to _Fill & _Stroked
set swatch of _All to swatch _NewColour
end try
end tell
end tell
Cheers
KevTry this:<br /><br />tell application "Adobe InDesign CS3"<br /> set myDocument to active document<br /> activate<br /> tell document 1<br /> try<br /> set theLayer to layer 1 -- or whatever<br /> set _Swatch to make color with properties {name:"PANTONE Blue<br />072 U", color:spot, color value:{100, 88, 0, 5}, model:spot}<br /> set _Colour to swatch "Black"<br /> set fill color of every item of all page items whose fill color<br />is _Colour and item layer is theLayer to _Swatch<br /> set stroke color of every item of all page items whose stroke<br />color is _Colour and item layer is theLayer to _Swatch<br /> end try<br /> end tell<br />end tell<br /><br />-- <br />Shane Stanley <[email protected]>
-
Using Weblogic Platform 7.0 (installed from platform700_win32.exe),
Running a BPM Doamin(WLIDomain with BPM only).
When I try to access my entity bean(CMP), the following exception is getting thrown.
I have seen a similar post in here, but the answer to that post, which says to
provide ACL. does not apply quite well my scenario.
To do this, I right clicked on the connection pool and selected define Ploicy..
It shows two options
RealmAdapterAuthorizer and DefaultAuthorizer; On DefaultAuthroizer i specified
role accessing the resource would be "everyone". - restarted the server - but
still the same error.
Please suggest a solution if any. Do i have to get some service pack for this?
TIA
Ranjith.We have never seen a case yet where this was not a permissions problem.
Do you have a fileRealm.properties file as part of your configuration?
"Ranjith" <[email protected]> wrote in message
news:3f0fdeb3$[email protected]..
>
java.sql.SQLException: Cannot obtain connection after 3600 seconds. ,Exception
= Access not allowed
java.sql.SQLException: Cannot obtain connection after 3600 seconds. ,Exception
= Access not allowed
atweblogic.jdbc.jts.Connection.wrapAndThrowSQLException(Connection.java:701)
atweblogic.jdbc.jts.Connection.getOrCreateConnection(Connection.java:623)
atweblogic.jdbc.jts.Connection.prepareStatement(Connection.java:133)
atweblogic.jdbc.rmi.internal.ConnectionImpl.prepareStatement(ConnectionImpl.ja
va:139)
atweblogic.jdbc.rmi.SerialConnection.prepareStatement(SerialConnection.java:81
atservice.samplemgt.v1_0.ejb.entity.BanksampletypeCMP_ckv0ao__WebLogic_CMP_RDB
MS.ej
bFindAll(BanksampletypeCMP_ckv0ao__WebLogic_CMP_RDBMS.java:873)
at java.lang.reflect.Method.invoke(Native Method)
atweblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.collectionFinder(RDBMSPersi
stenceManager
java:300)
atweblogic.ejb20.manager.BaseEntityManager.collectionFinder(BaseEntityManager.
java:715)
atweblogic.ejb20.manager.BaseEntityManager.collectionFinder(BaseEntityManager.
java:688)
atweblogic.ejb20.internal.EntityEJBLocalHome.finder(EntityEJBLocalHome.java:47
6)
at ... -
Listing (for further action) all page items that have a certain script label
hello from France,
Well the question is essentially in the subject line: how to find and work on all page items of a document (or a page/spread) that have the same script label (or better: whose script label contain the same word)?
I tried some variations around something like that, with no results:
set list_pageitems to every page item of page i whose label is "product"
Any clues?
Thanks for your help
VincentI found the answer (for those who might be interested), but still have a question (for those who know).
The solution:
set list_pageitems to page item "product" of page i
If you want to do it for a whose document (in may case, deleting some page items):
delete page item "product" of document 1
Strange syntax but it works :-)
The remaining question:
How to find page items whose label contains a certain string: it would be like selecting page items by tags (every word of the script label would be considered as a tag)?
Thanks -
Err : "Access Not Allowed to oracle.jdbc.driver.OraclePreparedStatement"
Hi,
How to resolve the error "Access Not Allowed to oracle.jdbc.driver.OraclePreparedStatement"
in jdeveloper?
Or
Can you please give me some sample pgms which uses oracle.jdbc.driver.OraclePreparedStatement?
Thanks in advance,
Senthil Kumar M.This is the error from the trace logs...
application [XMII] Cannot send an HTTP error response [500 Application error occurred during request processing. (details: com.sap.xmii.Illuminator.logging.LHException: com.sap.xmii.Illuminator.logging.LHException: java.lang.NoClassDefFoundError: oracle.jdbc.driver.OraclePreparedStatement)].
The error is: com.sap.engine.services.servlets_jsp.server.exceptions.WebIOException: The stream is closed.
Exception id: [0050569D6ACD006A0000010C000023D300046F4B653C90D7]
I could not find anything on the SDN regarding this message, so I may need to open up an OSS note.
Thanks
Skip Ford
Maybe you are looking for
-
Contract to purchase requisition
Hi! I have this situation: I want to creat a contract with reference to a purchase requisition and I'd want to divide the quantity of the purchase requisition. For exemple: I created a purchase requisition with 100 quantity. Now I'd like to creat a c
-
Hello. I fetch mc os 9.1 software please- Thanks a lot.
-
After downloading the Sims app, i purchased items from it. I checked my credit card account and the purchase was made, but after checking the app, the items i payed for weren't there. A message saying "Error: contact iTunes support" popped up. I just
-
Websphere deployment required edit of bc4j.xcfg file
Coming from this thread: Websphere 5.1 and ADF/UIX We've deployed an ADFUIX application to IBM Websphere, but are seeing strange requirements. The server could not get a jdbc connection until we edited the bc4j.xcfg file from having an encrypted pass
-
Moderators: can you press for a broadband usage mo...
This is a question for the moderators. You seem to be pretty good about getting stuff done at BT. Quite a common request for users on BT Total Broadband is for there to be an online broadband usage monitor in their control panel so that they can moni