As in phrase WHERE to address to field of the tabular form?

I have generated the master tabular form.
What realize in her set hung list box?
When add in request design:
WHERE SYSTEM_ID = :S_DEMSYSTEM_ID
exhibit works untrue
Also incomprehensibly, what do renovation hung by flap of the form
In usual form such works beautifully.

What to you it is not clear?
In the tabulared form I should choose only from the contextual list of values

Similar Messages

A sticky problem updating fields on a tabular form

I have an application where I'm trying to match skillset supply to skillset demand. We have resources and we have work for resources to do. Resources possess a set of skills. Work requires a set of skills. Skillsets are described by three fields: Domain, Target, Skill. So, we are able to capture the supply of skills in a table:
RSRC_ID (FK to Resource table)
DOMAIN
TARGET
SKILL
PROFICIENCY (this is the skill level 1 to 5)The relationship of resources to skill supply is 1 to many. Conversely, work demands skills, and so we capture skill demand in a table:
WORK_ID (FK to Work table)
DOMAIN
TARGET
SKILLThe relationship of work to skill demand is 1 to many also.
Users assign skills to resources using a master-detail form. It works fine
Users assign skills needed to work also using a master-detail form, and it works fine as well
A view then joins the skillset supply to skillset demand so that assignments can be made only where supply and demand match. This view is used in the LOV below.
The problem I have is that I am using a mapping table to capture assignments of work to resources or resources to work. It is a many to many mapping of work and resources with matching skillsets, and it looks like this:
RSRC_ID
WORK_ID
DOMAIN   (
TARGET   ( These are the skillsets where demand equals supply and are derived from the view and presented in the LOV )
SKILL      (I've created master-detail forms for the two types of assignments. An LOV in the detail form will present qualified resources or eligible work and then return the appropriate RSRC_ID or WORK_ID, but I must also populate the other three fields (DOMAIN, TARGET and SKILL) before I can insert or update the record. Here's the LOV from the form where resources are assigned to work:
SELECT sed.domain||'.'||
       sed.target||'.'||
       sed.skill||'/'||
       sed.skill_prof||' '||
       r.first_name||' '||
       r.last_name "d",
       r.rsrc_id "r"
FROM   ri_resource r, ri_skill_supply_eq_demand sed
WHERE r.rsrc_id = sed.rsrc_id
AND    sed.work_id = :P18_WORK_ID
order by 1It is not enough to just match the work to the resource, we must record for what skillset they are matched. I can't seem to see an easy way to populate the three other fields in the tabular form using data that I can retrieve with the LOV.
I am using APEX 4.1. Any help is appreciated.

Hi Dan,
Please could you replicate your problem on apex.oracle.com and share some developer credentials with us? It will be easier to demonstrate how this would be achievable.
For this specific problem, you will need to re-create all your relevant DB objects and populate them with some sample data.
Kind Regards, Pete

I'm tying to make a payment for photoshop but the fields on the payment form won't allow me to enter the correct card information. Im based in Japan but my card is registered to a UK address. the fields only allow for a Japanese style address and postco

I'm tying to make a payment for photoshop but the fields on the payment form won't allow me to enter the correct card information. Im based in Japan but my card is registered to a UK address. the fields only allow for a Japanese style address and postcode. What can i do to complete the payment and get photoshop!

As far as I know, your registered location and your credit card information must match... but,
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

How to read data/fields of the pdf form

Hi,
i want to orchestrate a process where input is interactive forma and output is xml data.
i mean i want to read data/fields of the pdf form.
Which activity do i use on workbench.
Regards
Sunil

Dieter,
I am talking about 3rd senario, where we create one process on workbench, and pass filled pdf as input and then output of process is xml file.
What is the process name here (Like renderPDF process) which extract data from pdf.
regards
Sunil

Unable to pass a parameter to a field in a tabular form.

I created a tabular form with 2.0 using the wizard. Im having issues though with 2 of my columns.
The two columns are last_edit_user and last_edit_date. As you can tell Im trying to pass the system date and :app_user to these two fields.
I read this thread Default Value in Tabular Form and decided to create a simple function on the database that returns the system date. Then under report attributes I went to the last_edit_date column. In Tabular Form Element I changed it to Display as Text (saves state) made the default type a PL/SQL expression or function then put the function name in the default text field.
When I try to update a field I then get:
Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-01407: cannot update
I have also tried creating a computation and passing the date to a hidden item then use default type item and list the hidden item in the default text box. I get the same error.
Considering how often these fields or similar would come up in a tabular form I cant help but think there must be an easy way of passing parameters to fields in a tabular form without making them editable.
Message was edited by:
[email protected]

This keeps coming up often and I find that the easiest way to handle this is in a row-level trigger on the underlying table
create or replace trigger t
before insert or update on mytable
for each row
begin
:new.last_update_date := sysdate;
:new.last_update_user := nvl(v('APP_USER'),user);
end;
/

How to use the separate symbol in the text field in the adobe form.

Hi,experts,
I dont know how to use the separate symbol to make a paragraph separate into several lines correctly in the text field in the adobe form.
Action:
1. config the ADS successfully.
2. create the adobe form with a mult-line textfield(binding the 'remark' context in the interface of the form) using sfp.
3. create a WDA for invoke the form and transfer the 'remark' context data.
I use the following codes to display the paragraph in the PDF document:
CONCATENATE
'1、aaaaaaaaaaa；'
'2、bbbbbbbbb '
'3、ccccccccccc'
'4、ddddddddd'
INTO remark .
lo_nd_z_hr_php_payslip->set_attribute(
EXPORTING
name = `REMARK`
value = remark ).
But I found all the content aren't paragraph separate correctly in the text field in the adobe form when I run the WDA.
Could you please give me some hints to make the paragraph separate correctly in PDF document? Thanks a lot in advance!
My email is : [email protected]
Best regards,
Tao
Edited by: wang tao on Apr 8, 2008 1:58 AM

Hi,
If it is just a one word value then you could use this in the exist event;
this.rawValue
= util.printx(">?<*",this.rawValue);
This changes the first character (represented by the ?) to uppercase (represented by the >) and all trailing characters (represented by the *) to lowercase (represented by the <).
If you wanted something more general ... if they could also enter a middle name then you could call a function like;
function toTitleCase(textValue)
return textValue.toLowerCase().replace(/\b[a-z]/g, function replacer(match) { return match.toUpperCase(); });
This uses a regex to change all lowercase letters following a word boundary to uppercase.
Bruce

How to add new fields to the system form (Ex.expenses to a/r invoice form)

hi
can any one tell me how to add new fields to the system form (Ex.expenses to a/r invoice form)
i want to add expenses field to system a/r invoice form and connect data base also.
i used the code of samples\11.system form manipulation(vb.net) but i'm not able to get it....so can any one help with code or concepts.
reply soon plz..
thankQ

If I understood you correctly, you are just trying to add new fields to the invoice form and then use them in your form. you should first go and add the field to your tables, which you would do by going to Tool --> User Defined Fields --> Manage User Fields. There are different documents or categories given. For ex. for invoices, Sales Orders you would add your field under the Marketing Documents. If you want the field to be just one per invoice, add it to the Title, otherwise if you want a field per invoice or Sales Order line, add it to the Rows section. Once you have done that then you can just create a edit box or drop down to represent the field and set the datasource for that to your field. If you want example code to do that, let me know.

How to enable a field on the person form?

Hello,
I am working in UK Legislation and I need to enable a greyed out field on the person screen. It's the "Disabled" field (to capture the disability of an employee).
This might sound an easy thing to do but I couldn't find any function or profile option that controls this. I couldn't find any metalink note on this. Could any one tell me how to do this or let me know of any metalink note on this?
Many Thanks,
Baloo

Both answers were helpful. Thanks a lot.
In the interest of other users I am pasting the answer below:
The Disability Discrimination Act 1995 (DDA) is the main piece of legislation which makes it unlawful to discriminate against a disabled person in their terms of employment, promotion opportunities, by dismissing them or by subjecting them to any other detriment. This act had been further amended, cumulating in the Disability Discrimination Act 2005 which is related to disability generally and extends outside the area of employment although some provisions will relate to employees.
Parts of the Act came into force in December 2005, other parts relating for example to transportation are applicable from December 2006. The above provisions replaced the concept of Registered Disabled Persons and
employment quotas which had been in existence since after the second world war.
In releasing the enhanced Disabilities functionality, it was intended to facilitate the maintenance of disability records through the Disability form and not the Disabled field on the person form.

How to change postion of the field in a tabular form

Hello Gurus,
My Table is like .Please ignore dots they have been placed just for better readability
Year.....product....w1_dt..........w1_qty....w2_dt..........w2_qty.....w3_dt...........w3_qty......w4_dt...........w4_qty
2010....1.............4-jan-2010....1............11-jan-2010....2.............18-jan-2010.....3.............25-jan-2010....4
2010....2.............4-jan-2010....4............11-jan-2010....5.............18-jan-2010.....7.............25-jan-2010....8
I have to make a tabular form for updation only, the tabular form should look like this
year......product......w1.................w2.................w3..................w4
2010.....1..............4-jan-2010.......11-jan-2010.....18-jan-2010.....25-jan-2010........-----dates can't be eddited
............................1....................2....................3...................4.......................-----this is qty column user will update this qty column
2010.....1..............4-jan-2010.......11-jan-2010.....18-jan-2010.....25-jan-2010........
............................4....................5....................7...................8......................
Please tell how could I make date field to come over qty field
Regards
Shashi
Edited by: user4285062 on Jul 22, 2010 1:03 AM
Edited by: user4285062 on Jul 22, 2010 1:10 AM
Edited by: user4285062 on Jul 22, 2010 1:12 AM

Hi,
For your scenario, you need to have two cellVariant as TableStandardCell (say successTSC & failTSC). Add tableCellEditors to these 2 TableStandardCell as you like. Mark there variantKey property as var1 & var2 respectively.
Do change the cellDesign as you like the color for the TableStandardCell.
Bind an attribute selectedVariant to your column selectedCellVariant property.
Now in wdDoModify you can write:
for(int i=0;i<wdContext.nodeCountries().size();i++){
if(wdContext.nodeCountries().getCountriesElementAt(i).getStatus().equals("SUCC")){
// Here node countries is the datasource of your table.
wdContext.nodeCountries().getCountriesElementAt(i).setVariantKey("var1");
} else if(wdContext.nodeCountries().getCountriesElementAt(i).getStatus().equals("FAIL")){
wdContext.nodeCountries().getCountriesElementAt(i).setVariantKey("var2");
The article below will definetly help you in your requirement.
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0310fd2-f40d-2a10-b288-bcbe0810a961]
Hope this will surely solve your problem.
thanks & regards,
Manoj

Calculated non-base table field in a tabular form

I am struggling with creating a non-base table calculated field in a tabular form in ApEx 3.1
Can you point me in the right direction
I thought this would be fairly easy to do, but I cant work out how to do it
Requirements
1) Tabular Form based on a table with QTY and PRICE columns
2) TOTAL is a non-base table field, based on QTY * PRICE
3) If the Qty or Price changes, the TOTAL should be re-calculated
Example
QTY   PRICE TOTAL
===    ===== =====
3       5          15
10      50         500
20      3           60
Environment
ApEx 3.1, Oracle 10 and Oracle 11 databases
I recommended to upgrade to a newer version of ApEx but the request was rejected so Im stuck with 3.1

Thanks, but its not the solution that I am after
I am looking for a solution that will ...
       1) not require the calculated value TOTAL to be stored in the table
and 2) re-calculate the TOTAL when I modify the dependent values (QTY and PRICE) before I save the changes to the database
I am still looking for a solution if anyone can help

Help- I have added a field in my tabular form and now i get an error in mul

Help- I have added a field in my tabular form and now i get an error in muli update form; Here is the error, how do I go in to change the process, adding the extra field??
Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process. current checksum = "F10F6D7EC4CF938382C6DC2EE22800F6", item checksum = "90E47F32E95B71B7A9D47A1311063445"., update "CAPRS"."CONTRACT_ERRORS" set "ID" = :b1, "CONTR_NUM" = :b2, "REPT_MONTH_CD" = :b3, "REPT_FISCAL_YEAR" = :b4, "REPORT_FAC_CAGE_CD" = :b5, "END_ITEM_NUM" = :b6, "END_ITEM_DESC" = :b7, "WSSC" = :b8, "WBS_CD" = :b9, "WPC_CD" = :b10, "CONTR_CLIN" = :b11, "CO
Error Unable to process update.

Hi,
I believe the error is due to the checksum process which doesn't have that additinoal field's information. You can try creating the form again with the additional field, or if needed you can go with the Manual tabular form.
Thanks,
Manish

Can we test a Field in the activeSync Form

Hi All,
Can we test a field in the activesync form.
I have created different fields in activesync form.
I wanted to test what data is coming and how activesync input form is handling the data and processing it.
I just had a look at the class files which are calling the activesync form but what i could understand is They are creating a query based on the schema map and the search predicate.
But when it comes to input form I wanted to know what data is coming and how the input form and the resource compares.
Can any one Please clarify this things will be greatful.
Thanks in advance.
Thanks and Regards
Gajendra Nagapurkar

Hey,
actually there are three generic objects filled for every record that is pulled from chang log when active sync polls.
These are activesync objet global object,IAPI. What you could do is enable logging in the active sync configuration and tail the file, you can see how the active sync adapter gets data fro change log ane what are changes.
Thanks,
pandu

Setting values for non-displayed fields on a Tabular Form

I'm having a problem setting non-displayed fields on the same table as displayed fields like last_update_date, last_updated_by, id's and other fields when creating new records or updating existing records in a Tabular form.
What is the best and easiest way to set these values without using database triggers?

Hi Jes,
I'm a little reluctant to use database triggers as I used this product a couple of years ago and I'm fairly sure I handled this problem in HTML DB without the use of triggers. I am therefore I'm getting a touch frustrated that I can't remember how to do it now !!
Do you know of any way of setting values for non-displayed fields on a Tabular Form without using database triggers?
Also, you seem to be suggesting that database triggers is the best way to do this?
Thanks

To the Adobe MUSE team....Have you considered adding an "Upload File" field for the contact forms?

To the Adobe MUSE team....Have you considered adding an "Upload File" field for the contact forms?

But seriously...
Is there any development being done for this? I have a careers section on our website that I have been asked to "make easier for applicants" (right now, there is a link that just opens an email). I'm going to make a full version of an application, but I would really like a way to upload resumes and CV's.
I'm going to have to look into some kind of service if this isnt something on the Muse radar. A reply of some kind would be fantastic!

Binding an SQL "where" clause to a field in the report.

Hello everybody,
I have made a crystal report that works fine. Now, I need to add a specific query to the report and drag and drop the returned fields in the report.
The problem is that I need to add a query that contains a "Where" clause that is binded to a field already existing in the report, for example :
SELECT T0.Field1,
T0.Field2,
T0.Field3
FROM Table1 T0
WHERE T0.Field4=(a field from a report)
Is it possible to do it ? if yes, how can I do it.
Thank you in advance for your further responds,
Best Regards,
- Youssef -

Moved to Report Design forum
You can't do it in that specific way. It would have to be done server side or use a subreport and then link the subreport on the field from the main report.
Don

As in phrase WHERE to address to field of the tabular form?

Similar Messages

Maybe you are looking for