AS2 Module tab.. Mapping Names for modified Standard Msg types ? ? BIC ??

HI All,
Im using AS2 adapter for standard PO message type orders.orders05
and i thought of using the seeburger standard mapping name "See_E2X_ORDERS_850" in AS2 Module tab.
Now the problem is my client has extended the idoc to orders.orders05./glb/orders by adding few more fields in some of the segments.
Since we have modified the standard message type and i dont think the standard mapping name will work for this ?? im i correct??
If yes, i think we need to use BIC mapping tool and modify the standard xsd by importing and we need to create the new map ( ex:map_E2X_Orders_Modified.xml) ,generate the SDA file for this and we need to deploy SDA into XI.
And finally if we use the modified mapping name in our AS2 module tab.I think it will work????
Any suggestion or inputs we can approach in these kind of situations.
Thank you.
Regards
Seema.

Hi Chirag,
Nice to see you back in action
I will be doing the below steps in BIC.. and let me know if anything is wrong in this.
i will Create the Project name as " Project_Orders_Modified" in BIC tool
1) i will modify the std msg xsd in txt file and Under my project name i will import it under EDIFACT. Save it and i will export it and save it in folder as...
 msg_DT_Orders.xml
2)i will create XML Message for this by giving

source : msg_DT_Orders.xml
Target : msg_XML_DT_orders.xml
I will import it into My Project " Project_Orders_Modified"
3) I will create the CreateMappingEDI to XML by giving
source : msg_DT_Orders.xml
Target : map_E2X_DT_orders.xml
I will import it into My Project " Project_Orders_Modified"
Then I will run the map.. and checks if it is working fine.
If yes, i will import my mapping into Active mappings and i will generate SDA file and will deploy into XI .
Finally i will use the mapping name " map_E2X_DT_orders " in AS2 Module tab.
Let me know if anything wrong.
-Seema.

Similar Messages

Need Seeburger BIC Mapping names for standard Msg types - EANCOM2002

Hi All,
I need Seeburger Bic Mapping names for standard Msg types.
Orders
ORDRSP
DESADV
Note that they are in EANCOM2002 format.
Kindly provide them asap.
Can anyone pls send the document to [email protected] if you have the Seeburger mapping names for EANCOM2002 and ANSIX12.
Thank You.
Regards
Seema.

Hi Marcos,
>> IF they have been deployed in your system the names will be:
>> See_E2X_ORDERS_UN_D96A
>> See_X2E_ORDERS_UN_D96A
>> See_E2X_DESADV_UN_D96A
>> See_X2E_DESADV_UN_D96A
R u sure of we can use these mappings for EANCOM2002 format.??
R u sure EANCOM2002 is equavalent to UN D96A???
-Seema.

Need Seeburger Mapping name for DESADV .

Hi All,
I want the Seeburger mapping name for DESADV .
The format of the file is ANSI file.
Also i want the folder name or standard number for DESADV ??
I mean like for Orders the folder name will be " ANSIX12_V3020_850 "
Kindly let me know asap.
Thank You.
Regards
Seema.

Hi,
    These are the few naming conventions that will be followed while doing mapping in SEEBURGER BIC mapping designer.Let me know if they help u in any way..
ADOPTED NAMING CONVENTIONS
1 - For Application Rules:
DOCUMENT_APLLICATION_DIRECTION_DATA (FILE EXTENSION FOR REFERENCE)
Length for each:
Document = 3     Samples of: PUR, POC, POA, ASN, TXT
Application = 4   Samples of: RECL, SOMS, HRMS, CORP, COMS, CONT
Direction = 1       Samples of: I or O
Data = 3              Samples of: DAT, XML, RPT
NOTE: Since spaces are not allowed in the names, S will be used as filler .
Sample Application Naming:
For 824 for Banking doc   TXT_CORP_I_RPT
2 - For Project Rules:
We decided that we would group these by related documents. Ex. All POs would be together.
Following are the Project definitions:
ORDERS (PURCHASING) = 850, 880
BANKING = 820, 824 (Related to the banking 820 only)
TRANSPORTATION = 404, 858, 856, 940, 945, 990, ..
INVOICING = 810, 857
TEXT = 824, 864, 870
INVENTORY = 852, 830, 846,..
3 General Rules:
1- IF mapping is the same with HRMS & COMS
      THEN Use CONT for Application
    ELSE Use HRMS or COMS (which ever is appropriate)
2- IF document is the same for the entire corporation
       THEN Use CORP as the Application
3- IF Generic
      THEN No Suffix is required
     ELSE Trading Partner Specific maps add the suffix
For Trading Partner specific rules, add the Name extension to the end of the rule
Thanks .

Seeburger Mapping Name for ORDERS EANCOM D01B format

Hi Experts,
Can anyone please let me know the Seeburger mapping name for ORDERS_EANCOM_D01B format.
See_E2X_ORDERS_EANCOM_D01B doesn't seem to be working.
Thanks.
Regards,
Shweta

Log on tothe physical system of the XI system, go to the Seeburger folder(Usually found in the D Drive).
Something like D:/Seeburger/HT/EDI Message Catalog/
Then look into the Folder corresponding to your EDI Standard/Message/Version combination.
YOu will find 3 files in the folder.
In that you will find a file name starting with msg_<XXXXXX>
YOu can get an Idea of the Mapping name because the mapping name would then be See_E2X_<XXXXXX>

How to use AUTO in Mapping name for EDIFACT

Hi
I have a source which will be posting 2 diff kinds of EDIFACT to XI.
I want to use just a single channel where i want to configure my .sda module.
I've seen that we can use 'AUTO' in MappingName parameter, so that the mapping is chosen dynamically.
However,when i tried to do so, i get an error saying that the adapter cannot find the mapping in the classpath.
Can anyone guide me as to how to use the AUTO parameter?
If possible, provide a link for some blog where they are using it.

Hi Alok,
Reason behing not getting the EDI payload was missing of splitter configuration, you need to configure the splitter as
you need to use AUTO mappingName instead of specific mapping name
once you configure split parameter of bic to true, it will generate an attacments like KEY|MAPPINGNAME|ACCEPTED|MessageNo
then based on this configuration splitter will look for the same key in Seeburger workbench configuration and then generates a XI message (SXMB_MONI entry) ...
If you dont want acknowledgement of EDI and sure about the version of the mapping then you can configure the mappingName
directly instead of AUTO...in BIC paramter
HTH
Rajesh

Mapping name for XCBL in seeburger

Hi experts,
XCBLPIIDOC
Our vendor is sending order response to us in XCBL format and i am using split adater as sender.
In seeburger meesage splitter I need to give the mapping name like See_E2X_XXXXX (ex See_E2X_CONTRL_UN_D3 ).
I checked all the blog but they have EDI standrd naming but as we are using XCBL i am not understanding what name I can give
can anyone please help me.

Hello,
xCBL is already XML, try searching for XML over AS2 in SDN.
http://forums.sdn.sap.com/click.jspa?searchID=75915044&messageID=9662162
If I remember it correctly, you do not need to provide a mapping name
Hope this helps,
Mark

How to obtain an access key for modifying standard objects?

Hello,
I am a so-called "dummy" in ABAP development, and I need some very basic
help.
I'm trying to modify standard communication structure MCVBAK for LIS
enhancement, as I learned in the LO630 SAP training, but I need an "access
key".
I went into my "SAP online services" account, but I can't find where I'll
find the acess key for the specific object I'm trying to modify.
Can someone help me, please?

You may be needing to enter your developer's key.
You must be a registered developer on your system to do this type of work.
Your system administrator will have to register you thru OSS, and you will be given a key.
The first time you try to edit an object, you can enter this, and you won't see that prompt again.
After that, if you are trying to change an SAP object, you will need to register that as described above.
Doug

Modifying standard material type configuration provided by SAP

I was recently involved in a discussion regarding whether or not to modify sap provided material types (e.g. FERT)
My position was that SAP provided material type configuration should not be modified, instead a z-version of the standard material type should be copied over to a z-version or a y-version (FERT copied as ZFRT), configurations changes made the z-version. My position was based on the following considerations:-
Reference to the original
Possible implication at the time of future releases or upgrades - In Some of my previous projects this was a reason why the standard material type configurations were never touched
Hence I am curious to know if there a more current or correct position on this topic.

Hi Jose,
You are absolutely correct that standard material type should not be changed as you can always reference to the original if you want to create a new material type by copying the old ones. I too have seen ZFRT and FERT.
I go by creating a Z one, as I have always the option to reference the original Material Type. As the above members have already replied the same.
It is very easy to check the material type like FERT, ROH etc. However, say you have changed the settings for standard material type like FHMI, LEIH, VERP etc and you want to create a new material type by referencing any of the above, you will need to check client 000 (as referred by Jurgen) to check what Pricing control it have S or V. What Item Category is in original. What selection of views are there in original etc. you always have a better edge to check from the originals if you do not change them.

Need function module or Bapi name for uploading CJ02 tcode

Hi All,
When i am trying to record the data for TCODE : CJ02 i need to enter the project Definition and enter the WBS element it takes me to the screen then i should select the WBS element and attach a file for that selected WBS element . The option for me to attach the attachment of file will be available on the application area(Services for the Object).
Now the problem when i try to do recording in SHDB this option like create attachement is not visible in the recodring . Kindly suggest me what can i do such that i attach the file for the particular project def and WBS element.
Either suggest any function module or other procedure .......
Regards,
Sana.
Edited by: Misbah Sultana on Nov 5, 2009 10:33 AM

Hi,
try using BAPI
BAPI_PROMO_CHANGESITEPLANNING
or
BAPI_PLANNEDORDER_CHANG
THANKS
ravi

Change tab strip name for ME52N transaction

All,
I am trying to change the TabStrip title from "Customer Data" to a custom title in Item Tabstrip in ME52N transction. I have implemented screen exit using the customer exit "MEREQ001". But I dont find a way to update the TabStrip Title.
SE51 doesnt work because it is a SAP standard code.
Does anyone know how to go about acheiving the above? Responses will be greatly appreciated.
Thanks.

If you use your own data fields, you can find these on the tab page "Customer data" in the screen area "Item details". You can change the description on the tab page to fit your requirements You have to create text symbol 111 (Item) in program SAPLXM02 to do this.
PS:pay attention to the language of the text.
Edited by: Lei Guo on Sep 6, 2010 10:58 AM

Scripted JDBC Adapter For Non Standard Database Types

I am looking to connect through JDBC to a UNIDATA database. I have place the jdbc driver in the WEB-INF/lib directory and rebooted the application server. When I try to create the resource and test the connection with the proper information (user, password, url, host, port, etc), I get a null pointer. I'm assuming the Database Type is causing an issue. Is there a way to get around this?

I am able to do the recon now. I had to upload the getUser script also. Once i did that I was able to get users linked into IDM properly.

Multiple receivers for same rfc msg type

I have a soap-XI-RFC scenario. I have to read the soap message and depending on the key field value, I have to send to two different SAP systems.
For EX:
Input Message:
<input_msgType>
<item>
 <Key>ABC-123452</Key>
 <value>test1</value>
</item>
<item>
 <Key>ABC-342222</Key>
 <value>test2</value>
</item>
<item>
 <Key>XYZ-676767</Key>
 <value>test2</value>
</item>
<item>
 <Key>XYZ-565655</Key>
 <value>test2</value>
</item>
</input_msgType>
Output Message1:
<BAPI_SEND_DATA>
 <item>
 <Key>ABC-123452</Key>
 <value>test1</value>
 </item>
 <item>
 <Key>ABC-342222</Key>
 <value>test2</value>
</item>
</BAPI_SEND_DATA>
Output Message2:
<BAPI_SEND_DATA>
 <item>
 <Key>XYZ-676767</Key>
 <value>test1</value>
 </item>
 <item>
 <Key>XYZ-565655</Key>
 <value>test2</value>
 </item>
</BAPI_SEND_DATA>
I have to send the same rfc request data to two sap systems..all the key with ABC starting Key should go to SAP system1
and all the key with XYZ key should go to SAP system 2.
Should I split the message in mapping - if so how can i do it? What kind of BPM steps should I do?
Can I do this in receiver determination itself using condition? THanks for suggestions and help..
Thilothama

Krishna Moorthy,
I came to a point where I decided that Java mapping would be the best for this. But do you have some sample starts for this??? I would appreciate if you can show me some light...
Would something like this help??
public void getPhonesById(String[] a, String[] b, String[] c, ResultList result, Container container){
Map map = (Map) container.getParameter("phones");
if (map == null){
map = new HashMap();
for (int i = 0; i<b.length; i++){ // if the payload is valid to xsd, b and c have equal length
 List list = (List) map.get(b);
 if (list == null){
 list = new ArrayList();
 map.put(b, list);
 list.add(c);
container.setParameter("phones", map);
List list = (List)map.get(a[0]);
for (int i = 0; i< list.size(); i++) result.addValue((String) list.get(i));
Thanks and appreciate your help
Thilothama
Message was edited by:
 Thilothama v

Table and Fields names for following

Hi All,
1. What is the Table&Field Name for finding out Program Type[Report/Module pool etc..] of a Program!
2. Is there any Table&Field Name for Transport Request Name. We need to find out TR Name Based on Program name.
Can anybody solve above issues!
Thanks in advance.
Thanks,
Deep.

Hi,
In TRDIR table specify the NAME as report name and SUBC is teh field whic gives u the report type.
1 Executable program
I INCLUDE program
M Module pool
F Function group
S Subroutine pool
J Interface pool
K Class pool
For the second one
Table name > RSEUMOD
Hope this solves ur query.
Message was edited by:
 Judith Jessie Selvi

Table name for account determination

what is the table name for finding the material type, valuation classes and accounting modifier?
Thanks
Manesh

Hi,
Go to SE 11 Table name V_134_K.
Regards,
Satya

EDI Message Mapping Names

Hi All,
Can I please have the EDI message mapping names for the following:
1)Tradacoms versions 8 and 9
Inbound:Source message type ORDHDR and the target is IDOC structure ORDERS05(Sales Order)
outbound: Source message Invoic02 Idoc and the target message type INVFIL
2)EDIFACT D96A:
Outbound:Source message Invoic02 Idoc and the target message type INVOIC
3)ENACOM:
Outbound: For Source message Invoic02 Idoc and the target message type INVOIC
Your help is much appreciated.
Cheers,
Smith

Hi,
DO u have BIC installed on ur PC. if u have then u could find out the mapping name for the BIC itself.
Mapping program name for example:
See_E2X_ORDERS_D9A is the mapping name for ORDERS message type.
Chirag

AS2 Module tab.. Mapping Names for modified Standard Msg types ? ? BIC ??

Similar Messages

Maybe you are looking for