ASA interface name and nameif are different

Hi Everyone,
On one of ASA  i have this config say
interface BCISCO
nameif CISCO
ip address 192.168.x.x 255.255.0.0 standby IP 192.168.x.x
Need to understand why we have interface and nameif different here?
Also when i try to access ASA  by ASDM to ASA  from internal network log shows
built inbound TCP connection for ASA interface.
So need to know whenever we access ASA  from internal network it will say inbound connection?
Or there are some criteria that tells when connection is inbound to ASA?
Thanks
MAhesh

Hi Jouni,
yes it is in context mode
72           2013/04/17 10:10:59.640 MST     192.168.100.12  Apr 17 2013 17:10:58: %ASA-6-302013: Built inbound TCP connection 11283929 for Net:192.168.100.17/62287 (192.168.100.17/62287) to identity:192.168.100.12/443 (192.168.100.12/443)
71           2013/04/17 10:10:59.640 MST     192.168.100.12  Apr 17 2013 17:10:58: %ASA-6-106015: Deny TCP (no connection) from 192.168.100.17/62286 to 192.168.100.12/443 flags FIN ACK  on interface Net
70           2013/04/17 10:10:59.640 MST     192.168.100.12  Apr 17 2013 17:10:58: %ASA-6-302014: Teardown TCP connection 11283774 for Net:192.168.100.17/62286 to identity:192.168.100.12/443 duration 0:00:03 bytes 381 TCP Reset-O
69           2013/04/17 10:10:59.640 MST     192.168.100.12  Apr 17 2013 17:10:58: %ASA-6-605005: Login permitted from 192.168.100.17/62286 to Net:192.168.100.12/https for user "cisco"
68           2013/04/17 10:10:56.343 MST     192.168.100.12  Apr 17 2013 17:10:55: %ASA-6-302013: Built inbound TCP connection 11283774 for Net:192.168.100.17/62286 (192.168.100.17/62286) to identity:192.168.100.12/443 (192.168.100.12/443)
67           2013/04/17 10:10:56.343 MST     192.168.100.12  Apr 17 2013 17:10:55: %ASA-6-106015: Deny TCP (no connection) from 192.168.100.17/62285 to 192.168.100.12/443 flags FIN ACK  on interface Net
66           2013/04/17 10:10:56.343 MST     192.168.100.12  Apr 17 2013 17:10:55: %ASA-6-302014: Teardown TCP connection 11283684 for Net:192.168.100.17/62285 to identity:192.168.100.12/443 duration 0:00:03 bytes 381 TCP Reset-O
65           2013/04/17 10:10:56.343 MST     192.168.100.12  Apr 17 2013 17:10:55: %ASA-6-605005: Login permitted from 192.168.100.17/62285 to Net:192.168.100.12/https for user "cisco"
64           2013/04/17 10:10:56.343 MST     192.168.100.12  Apr 17 2013 17:10:55: %ASA-6-606001: ASDM session number 0 from 192.168.100.17 started
63           2013/04/17 10:10:56.343 MST     192.168.100.12  Apr 17 2013 17:10:55: %ASA-6-605005: Login permitted from 192.168.100.17/62284 to Net:192.168.100.12/https for user "cisco"
62           2013/04/17 10:10:52.733 MST     192.168.100.12  Apr 17 2013 17:10:51: %ASA-6-302013: Built inbound TCP connection 11283684 for Net:192.168.100.17/62285 (192.168.100.17/62285) to identity:192.168.100.12/443 (192.168.100.12/443)
61           2013/04/17 10:10:52.718 MST     192.168.100.12  Apr 17 2013 17:10:51: %ASA-6-302013: Built inbound TCP connection 11283681 for Net:192.168.100.17/62284 (192.168.100.17/62284) to identity:192.168.100.12/443 (192.168.100.12/443)
60           2013/04/17 10:10:52.515 MST     192.168.100.12  Apr 17 2013 17:10:51: %ASA-6-106015: Deny TCP (no connection) from 192.168.100.17/62283 to 192.168.100.12/443 flags FIN ACK  on interface Net
59           2013/04/17 10:10:52.515 MST     192.168.100.12  Apr 17 2013 17:10:51: %ASA-6-302014: Teardown TCP connection 11283636 for Net:192.168.100.17/62283 to identity:192.168.100.12/443 duration 0:00:02 bytes 806 TCP Reset-O
58           2013/04/17 10:10:52.515 MST     192.168.100.12  Apr 17 2013 17:10:51: %ASA-6-605005: Login permitted from 192.168.100.17/62283 to Net:192.168.100.12/https for user "cisco"
57           2013/04/17 10:10:52.358 MST     192.168.100.12  Apr 17 2013 17:10:51: %ASA-6-606003: ASDM logging session number 0 from 192.168.100.17 started
56           2013/04/17 10:10:52.358 MST     192.168.100.12  Apr 17 2013 17:10:51: %ASA-6-605005: Login permitted from 192.168.100.17/62282 to Net:192.168.100.12/https for user "cisco"
55           2013/04/17 10:10:50.374 MST     192.168.100.12  Apr 17 2013 17:10:49: %ASA-6-302013: Built inbound TCP connection 11283636 for Net:192.168.100.17/62283 (192.168.100.17/62283) to identity:192.168.100.12/443 (192.168.100.12/443)
54           2013/04/17 10:10:50.140 MST     192.168.100.12  Apr 17 2013 17:10:49: %ASA-6-302013: Built inbound TCP connection 11283629 for Net:192.168.100.17/62282 (192.168.100.17/62282) to identity:192.168.100.12/443 (192.168.100.12/443)
53           2013/04/17 10:10:50.108 MST     192.168.100.12  Apr 17 2013 17:10:49: %ASA-6-106015: Deny TCP (no connection) from 192.168.100.17/62281 to 192.168.100.12/443 flags FIN ACK  on interface Net
52           2013/04/17 10:10:50.108 MST     192.168.100.12  Apr 17 2013 17:10:49: %ASA-6-302014: Teardown TCP connection 11283529 for Net:192.168.100.17/62281 to identity:192.168.100.12/443 duration 0:00:02 bytes 3107 TCP Reset-O
51           2013/04/17 10:10:49.937 MST     192.168.100.12  Apr 17 2013 17:10:49: %ASA-6-605005: Login permitted from 192.168.100.17/62281 to Net:192.168.100.12/https for user "cisco"
50           2013/04/17 10:10:47.640 MST     192.168.100.12  Apr 17 2013 17:10:46: %ASA-6-302013: Built inbound TCP connection 11283529 for Net:192.168.100.17/62281 (192.168.100.17/62281) to identity:192.168.100.12/443 (192.168.100.12/443)
Where interface NET is ASA interface with IP 192.168.100.12
192.168.100.17 is MY PC IP
This is log while i access the ASA  by https.
Can you please tell in logs why it has repeat logs for example
ASDM logging session started  it has this line 2 times
Thanks
MAhesh

Similar Messages

  • The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

    The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
    Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
    Logon failure: unknown user name or bad password 
    am using Windows integrated security,version of my sql server 2008R2
    I have go throgh the different articuls, they have given different answers,
    So any one give me the  exact soluction for this problem,
    Using service account then i will get the soluction or what?
    pls help me out it is urgent based.
    Regards
    Thanks!

    Hi Ychinnari,
    I have tested on my local environment and can reproduce the issue, as
    Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
    Please also find more details information about when to use the execution account, if possible,please also not specify this account:
    This account is used under special circumstances when other sources of credentials are not available:
    When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
    When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
    Execution Account (SSRS Native Mode)
    If you still have any problem, please feel free to ask.
    Regards
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • How to compare index names and columns from different user?

    I am using below query to compare two indexes from 2 different users but even though index name and columns are same... result shows me they are different.. what I am doing wrong? Thanks
    WITH t AS
            (SELECT COUNT (DISTINCT index_owner || index_name || indexed_cols)
                       cnt
               FROM (  SELECT index_owner,
                              index_name,
                              listagg (column_name, ',')
                                 WITHIN GROUP (ORDER BY column_position)
                                 indexed_cols
                         FROM dba_ind_columns
                        WHERE index_name='XPKTBL_A'
                     GROUP BY index_owner, index_name))
    SELECT CASE
              WHEN cnt > 1 THEN 'Indexes are different'
              WHEN cnt = 0 THEN 'Indexes dont exist'
              WHEN cnt > 1 THEN 'Indexes are identical'
           END
              commnt
      FROM t
    Result:
    Indexes are different
    but Actually if you check below they are same After when I run this query:
    SELECT index_owner,
             index_name,
             listagg (column_name, ',') WITHIN GROUP (ORDER BY column_position)
                indexed_cols
        FROM dba_ind_columns
       WHERE index_name='XPKTBL_A'
    GROUP BY index_owner, index_name;
    Result:
    Index_owner
    Index_name
    Index_cols
    USER1
    XPKTBL_A
    FIELD_A1
    USER2
    XPKTBL_A
    FIELD_A1

    Hi,
    Erhan_toronto wrote:
    I am using below query to compare two indexes from 2 different users but even though index name and columns are same... result shows me they are different.. what I am doing wrong? Thanks
    WITH t AS
            (SELECT COUNT (DISTINCT index_owner || index_name || indexed_cols)
    So index_owner is 'USER1' in one case, and 'USER2' in the other; right?
    A string that starts with 'USER1' will be distinct from a string that starts with 'USER2', no matter what the rest of the string contains.  Maybe you don't want to compare the owners, or maybe you meant to use some other column (such as table_name) instead of index_owner).
    I hope this answers your question.
    If not, post a little sample data (CREATE TABLE, CREATE INDEX and CONNECT statements), and also post the results you want from that data.
    Explain, using specific examples, how you get those results from that data.
    Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
    See the forum FAQ: https://forums.oracle.com/message/9362002

  • When i go into history to delete everything but when i go to type site it comes up and name and password are saved i want to delete all this but cannot

    Question
    when i go into history to delete everything but when i go to type site it comes up and name and password are saved i want to delete all this but cannot edit

    Quote from the article.
    Time Machine in OS X Lion includes a new feature called "local snapshots" that keeps copies of files you create, modify or delete on your internal disk. Local snapshots compliment regular Time Machine backups (that are stored on your external disk or Time Capsule) giving you a "safety net" for times when you might be away from your external backup disk or Time Capsule and accidentally delete a file.
    So what makes a notebook any different then a desktop, other then with a desktop you might have your tm backup drive connected all the time.
    The object here is to not indiscriminately delete files you need or want to keep. I personally have never deleted a file I wanted to keep.
    In essence a backup is for catastrophic failure of your system. So it can be restored once that failure has been fixed. Not because you go in willy nilly and start deleting files.

  • I receive an error stating user name and password are not valid on my ipad and iphone 3Gs when attempting to load email from my icloud account. When I log onto icloud from my Mac, it wont load the email either.

    One day, my ipad and iphone pick up my emails (.mac account) from icloud just fine. the next day, I recieved error messages that say my user name and password are not accurate. I removed the icloud program on both devices and added it back on to both devices and get the same message. I logged into icloud from my Mac and while I can log in, it times out when I select email and wont load the email there either. Any Suggestons?

    I am having the same problem; it started about 24-36 hours ago.
    I know my ID/PW combo are correct because I can access all other aspects of iCloud except mail.
    iPhone -- returns incorrect ID / Password
    iPad -- Same
    Mail.app on Mac -- returns incorrect password error
    icloud.com -- allows me to log in and use all functions accept mail.  When I try to use mail it stays on a white screen for about 60 seconds then returns a dialogue box that indicates a server error.
    I contacted Apple and they placed my iCloud account into something called "Troubleshooting" mode.  They generated a new strong password and sent it on to "Engineering."
    I suspect there are a small number ofo users like you who are affected with the same problem I am.  Too small a number for it to be reported as an outtage.  I suggest you call Apple and open a case to have your mail investigaged.
    Hope this helps...

  • I have a macbook pro, and i want to transfer my hard drive from my macbook, but the display drivers and such are different.  How do i do this?

    I have a macbook pro, and i want to transfer my hard drive from my macbook (500g), but the display drivers and such are different.  How do i do this and is it possible?
    The Macbook Pro has Mac OS X 10.4.11 (70g hard drive)
    The Macbook has Mac OS X 10.6.8 (500g hard drive)

    The MacBook's hard drive lacks the necessary hardware drivers to boot the MacBook Pro even though it has a much newer OS on it; that's why simply moving it into the Pro doesn't work. Presumably you have a very old MB Pro, because only the very first MB Pro model (produced January to May 2006) was ever offered with an 80GB hard drive. Are you sure you want to move your big drive into such an old machine? The MacBook must be newer, because the first MacBook was introduced just as the first Pro model was discontinued.

  • HT204053 I put an iTunes gift card into my iTunes app and wanted to use it to buy more iCloud storage. How do I do that? iTunes and iCloud are different accounts. Help

    I put an iTunes gift card into my iTunes app and wanted to use it to buy more iCloud storage. How do I do that? iTunes and iCloud are different accounts. Help

    Not on your own. Click here and ask the iTunes Store staff to put it back onto the card; they'll only do this if none of the balance has been spent.
    (115868)

  • The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) The user name or password is incorrect

    I am able to run the report fine in BIDS in the preview window, and it deployes fine.  When it goes to view the report in the browser, I get the following error.  There is no domain, I am using a standalone computer with SQL Server and SSRS on
    this one machine.
    Can anyone point to where I might configure the permission it is looking for?  thanks!  Steven
    The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
    Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
    The user name or password is incorrect
    Steven DeSalvo

    Hi StevenDE2012,
    Based on the error message "The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)", it seems that the Unattended Execution Account settings in Reporting Services
    Configuration is not correct.
    Reporting Services provides a special account that is used for unattended report processing and for sending connection requests across the network. Unattended report processing refers to any report execution process that is triggered by an event rather than
    a user request. The report server uses the unattended report processing account to log on to the computer that hosts the external data source. This account is necessary because the credentials of the Report Server service account are never used to connect
    to other computers. To configure the account, please refer to the following steps:
    Start the Reporting Services Configuration tool and connect to the report server instance you want to configure.
    On the Execution Account page, select Specify an execution account.
    Type the account and password, retype the password, and then click Apply.
    In addition, please verify you have access to the Report Server database by following steps:
    Go to SQL Server Reporting Services Configuration Manager, make sure the configuration is correct.
    Go to Database, Verify that you can connect to the database.
    Make sure you are granted public and RSExecRole roles.
    Reference:
    Configure the Unattended Execution Account
    Configure a Report Server Database Connection
    If the problem is unresolved, i would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
    Thanks,
    Wendy Fu

  • Feature: Saving image. Problem: When giving name, as default name and extention are highlighted. I want only the name to be highlighted.

    When saving items via firefox, like a picture, the name and extention are highlighted, e.g. "nameofpicture.gif"
    Can I change it so that it only hightlights the name and not the extention, e.g. "nameofpicture"?
    See link to picture of problem...
    http://fonon.co.uk/wp-content/uploads/images/firefoxproblem.png

    David,
    I don’t have the option to append the file extension.  I am using:
    Adobe Photoshop Elements Version: 11.0 (11.0 (20120830.r.32025)) x32
    Operating System: Windows 8 64-bit
    Version: 6.2
    Any ideas?
    Thanks,
    Rich
    Sent from Windows Mail

  • BEx:Hierarchies in DIM and FAC are different for Cost Element

    Hi Experts,
    Whenever we execute a report we are getting a warning message as "Hierarchies in DIM and FAC are different for Cost Element", but in report level we are not maintaining hierarchy properties for Cost Element.
    We have executed Master Data tests in RSRV also and still the problem.
    Is any other to do to get rid of this warning message?
    Thanks in Advance.
    Regards,
    RAO.

    Hi all,
    I face the issue like this but with transaction KOAP - Plan settlement
    But, the problem is that, I do not active reconciliation ledger, so I do not maintain any thing relate to reconciation ledger or adjustment posting? I can do transaction "actual settlement"  without error
    So, How this error come to me?
    And how I can fix it?
    Thanks all!

  • Trigger Email to SC Requestor when SC Creator and Requestor are different

    Hi SRM Gurus,
    I need to trigger an email to SC Requestor when the SC Creator and Requestor are different.
    I searched in the forum but i couldn't get any details related to this.
    Please throw some light on this.
    Thank You.
    With Regards,
    P.Arunkumar

    Hi,
    A couple of approaches are possible:
    1) Incorporate the check into the approval-workflows. The information you need (both creator and requestor) are in the business-object (bus2121). This will require someone with knowledge of workflow, but it's not really all that difficult. Note that you use a notification-task and not a workitem to inform the requestor (you want them to get an email with info, not a workitem like an approver gets).
    Check out the workflow WS10400051 which is used at the end of all SC-workflows. It already contains checks on "sending mail" to approvers, reviewers etc. and a sub-workflow to generate mails to these agents. This would be an "easy" place to add your check and your mail-sending.
    2) Create a Z-copy of the BUS2121 and adapt the setreleased-function to handle sending the mail (less work but more invasive).
    If you have further questions, please report. I will check this thread in the coming time.
    If this helps you, please awards points.

  • Help-Task not found - Please check the Task Type, Name and Location are cor

    HI all,
    i have upgraded my owb from version 11gr1 to 11gr2. the installation is complete and all my mappings and objects are imported successfully.
    i was able to execute the mappings using the sql code:
    @/oracle/product/11.2.0/owb/rtp/sql/sqlplus_exec_template.sql
    by logging into sqlplus as the user in whose schema mappings are deployed.
    hOwever, suddenly i am getting the error since sometime back - not sure what might have happened or what might have gone wrong. can someone please help me understand what might be wrong - how to decode this?
    Here is my error:
    @/oracle/product/11.2.0/owb/rtp/sql/sqlplus_exec_template.sql
    Role set.
    Enter value for 1: WSODS
    Call completed.
    Enter value for 2: ODS_SCHEMA
    Enter value for 3: PLSQLMAP
    Enter value for 4: MAPPING_1
    Enter value for 6: ","
    Enter value for 5: ","
    Stage 1: Decoding Parameters
    |  location_name=ODS_SCHEMA
    |  task_type=PLSQLMAP
    |  task_name=MAPPING_1
    Stage 2: Opening Task
    begin
    ERROR at line 1:
    ORA-20001: Task not found - Please check the Task Type, Name and Location are
    correct.
    ORA-06512: at "OWBSYS.WB_RT_API_EXEC", line 759
    ORA-06512: at "OWBSYS.WB_RT_SCRIPT_UTIL", line 910
    ORA-06512: at line 2When i execute this: i get the result as follows:
    SELECT warehouse_object_id, store_id, object_type_id, object_type_name, object_name FROM owb$wb_rt_warehouse_objects
    where object_name = 'MAPPING_1';
    WAREHOUSE_OBJECT_ID     STORE_ID                OBJECT_TYPE_ID          OBJECT_TYPE_NAME                                                 OBJECT_NAME                                                     
    15947                   15325                   769                     PLSQLMap                                                         MAPPING_1                                                       
    1 rows selectedEdited by: Chaitanya on Mar 5, 2012 3:33 AM

    Hi Chaitanya,
    Did you get any resolution for this error? I'm facing the same error while trying to execute OWB mapping through this command.
    Any help would be much appreciated. Thanks.
    Regards,
    Jagari

  • Using my Web.Mail account with demon (THUS). I can NOT login using Firefox but I CAN with (choke) Internet Explorer. The login names and passwords ARE correct.

    Initially, the Demon support desk asked me to reset all my browsing history which did nothing.
    I tried Internet Explorer (7.0.5730.11) and this too failed initially but after several tries, I managed to log in and collect my mails.
    I then logged out and tried Firefox, which failed (Incorrect log in name or password).
    I immediately tried IE again and got in first time.
    In Firefox (TOOLS, OPTIONS, SECURITY, EXCEPTIONS), I set web.mail.demon.net to permit the site any access that might have been denied.
    The user name and password ARE correct (that would be too easy) but Firefox seems not to send one of these correctly ??? or is not sending something I.E. does.
    aarghhh

    From the Safari menu bar, select
    Safari ▹ Preferences... ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
    If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.

  • Listing Interface Names and Project Names

    Hi,
    I want to list all the interface names and Project Names in ODI.
    Can anyone suggest me how to do this.
    Thanks,
    Sant

    SELECT DISTINCT
    SNP_PROJECT.PROJECT_NAME    AS PROJECT_NAME,
    SNP_FOLDER.FOLDER_NAME      AS FOLDER_NAME,
    SNP_POP.POP_NAME            AS INTERFACE_NAME,
    CASE
    WHEN SNP_POP.WSTAGE='E' THEN 'TABLE_TO_TABLE_INF'
    ELSE 'TEMP_INTERFACE' END   AS INTERFACE_TYPE,
    SNP_POP.LSCHEMA_NAME        AS TARGET_SCHEMA,
    SNP_POP.TABLE_NAME          AS TARGET_TABLE,
    SNP_POP_COL.COL_NAME        AS TARGET_COLUMN,
    CASE
    WHEN SNP_POP.WSTAGE='E' THEN T_COL.SOURCE_DT||' ('||T_COL.LONGC||')'
    ELSE SNP_POP_COL.SOURCE_DT||' ('||SNP_POP_COL.LONGC||')'
    END AS TRG_DATATYPE,
    SNP_SOURCE_TAB.LSCHEMA_NAME AS SOURCE_SCHEMA,
    SNP_TABLE.TABLE_NAME        AS SOURCE_TABLE,
    SNP_COL.COL_NAME            AS SOURCE_COLUMN ,
    SNP_COL.SOURCE_DT||' ('||SNP_COL.LONGC||')' AS SRC_DATATYPE,
    rowtocol('SELECT DISTINCT TXT FROM SNP_TXT WHERE I_TXT='||i_txt ) AS COLUMN_MAPPING
    -- to use without rowtocol use SNP_TXT.TXT AS COLUMN_MAPPING
    FROM SNP_PROJECT
    LEFT OUTER JOIN SNP_FOLDER ON SNP_FOLDER.I_PROJECT=SNP_PROJECT.I_PROJECT
    LEFT OUTER JOIN SNP_POP ON SNP_POP.I_FOLDER=SNP_FOLDER.I_FOLDER
    LEFT OUTER JOIN SNP_POP_COL ON SNP_POP_COL.I_POP=SNP_POP.I_POP
    LEFT OUTER JOIN SNP_POP_CLAUSE ON SNP_POP_CLAUSE.I_POP=SNP_POP.I_POP
    LEFT OUTER JOIN SNP_TXT S_TXT ON S_TXT.I_TXT=SNP_POP_CLAUSE.I_TXT_SQL
    LEFT OUTER JOIN SNP_TXT ON SNP_TXT.I_TXT= SNP_POP_COL.I_TXT_MAP
    LEFT OUTER JOIN SNP_SOURCE_TAB ON SNP_SOURCE_TAB.I_POP=SNP_POP.I_POP
    LEFT OUTER JOIN SNP_TXT_CROSSR ON SNP_TXT_CROSSR.I_TXT=SNP_TXT.I_TXT
    LEFT OUTER JOIN SNP_COL ON SNP_COL.I_COL=SNP_TXT_CROSSR.I_COL
    LEFT OUTER JOIN SNP_TABLE ON SNP_TABLE.I_TABLE= SNP_COL.I_TABLE
    LEFT OUTER JOIN SNP_COL T_COL ON T_COL.I_COL=SNP_POP_COL.I_COL
    WHERE
    -- SNP_POP.POP_NAME='&TAB'
    -- SNP_FOLDER.FOLDER_NAME ='&TAB'
    SNP_PROJECT.PROJECT_NAME='DEVELOPMENT'
    ORDER BY SNP_POP.POP_NAME
    for more details you can refer WWW.ODIEXPERT.COM
    Thanks

  • Can't sign in to google, says the user name and password are incorrect but they are not! No problem with IE

    I am trying to sign into my google account. I go through the process of resetting the password successfully. When I reopen Firefox, I have to sign in again (despite checking "stay signed in") and the user name and password are deemed not correct even though they are! There is no problem in Internet Explore. In Firefox, I have cleared the cache and cookies.

    Looks like you might have an old password saved in Firefox.
    The instructions here should be able to help you remove your saved ebay password.
    https://support.mozilla.org/en-US/kb/make-firefox-remember-usernames-and-passwords?#w_viewing-and-deleting-passwords

Maybe you are looking for