Asant cannot find package, javac can??

Hi All,
I am working through the J2EE training disc CDJ-310A. I am trying to build the bankproject with asant and build.xml.
Compiling with asant.
Classpath set and works (javac finds it and set looks okay).
Javac finds junit fine.
Is there some other setting that asant uses other than the class path? Why would javac find junit and not asant??
details:
Imports:
import junit.framework.*;
import junit.extensions.*;
import junit.runner.*;
ClassPath ; JUNIT_HOME is c:\Junit4.1
%JUNIT_HOME%\junit-4.1.jar
Thanks, Ed.

Hi,
Thanks for the pointer, unfortunately, I read the manual and it is still not working.
Thanks, though, Ed.

Similar Messages

I just bought a new IMAC. All my itunes was backed up on my ext hardrive. The data migrated over but I cannot find it. Can you tell me where it is

I just bought a new IMAC. All my itunes was backed up on my ext hardrive. The data migrated over but I cannot find it. Can you tell me where it is

Fortuny wrote:
Have a read here How do I set up a new Mac from an old one, its backups, or a PC? about cdertain culprits.
Hi!
Just for future reference, I've moved my site to http://pondini.org, since Apple is dropping web hosting in June.
Both sites are active now; after a few days, I'll put redirect notices on the old one, then leave it there until it goes "poof."

Cannot find package/class symbol

hello. i'm using netveans for the first time. i have a java application with 2 classes... pb.java with public class pb int package svr and cl.java with public class cl in package cli
that is..
file class package
pb pb svr
cl cl cli
pb.java compiles properly cl.java gioves error.
the error is in the following lines of code...
pb obj1 = new pb();
        pb obj2 = new pb();i'm trying to make an object fo type pb from cl.java. the error i get is...
cannot find symbol
class pb
location cli.cl
i alse tried puttin svr.pb instead of pb but no use.
the entire cose is as follows...
pb.java
* pb.java
* Created on December 4, 2006, 8:56 AM
package svr;
public class pb
    private double balance;
    private double []lt = new double [10];
    private int i=9;
    public void deposit(double amt)
        if(amt<=0)
            System.out.println("Enter amount greater than 0");
        else
            balance=balance+amt;
            if(i>=0)
                lt=amt;
else
for(int j=9;j>=0;j--)
lt[i]=lt[i-1];
lt[0]=amt;
public void withdraw(double amt)
if(amt<=0)
System.out.println("Enter amount greater than 0");
else
if(amt>balance)
System.out.println("Balance lower than amount entered");
else
balance=balance-amt;
if(i>=0)
lt[i]=-amt;
else
for(int j=9;j>=0;j--)
lt[i]=lt[i-1];
lt[0]=-amt;
public void bal()
System.out.println("Balance: "+balance);
public void lts()
System.out.println("Last 10 Transactions");
for(int j=i;j>10;j++)
System.out.println(lt[j]);
public void statement()
lts();
bal();
cl.java
* cl.java
* Created on December 4, 2006, 8:58 AM
package cli;
class cl
    public static void main(String[] args)
        pb obj1 = new pb();
        pb obj2 = new pb();
        obj1.deposit(100.50);
        obj1.statement();
        obj2.deposit(200.75);
        obj2.statement();
        obj1.withdraw(25.50);
        obj1.statement();
        obj2.withdraw(100.25);
        obj2.statement();

For a beginner these tools are worst, because they
hide all the stuff a programmer needs to know to find
his way around Java. They should spend a few weeks
with the command line and a good text editor before
switching.
Just because an IDE does something for you, it
doesn't mean you don't need to kno wwhat it does.
Unless you volunteer to handle all "how do I do X in
Netbeans/Eclipse/Whatever", JAR and classpath
questions posted here by newbies yourself.I suppose I can agree with that to some extent. I wouldn't suggest to anyone that they just blindly trust whatever code the IDE inserts automatically.
But there's nothing wrong about learning by example. The IDE is willing to teach proper syntax, and eclipse will give suggestions about capitalizing class names and making constants all-caps.
There are things that frustrate new programmers where an IDE will be helpful, especially if the entire API is uncharted territory.

[SOLVED] Cannot find package "flashplugin" or "archey".

[EDIT - yaourt and archey now installed, thanks]
I am running Arch 2.6.34 with GNOME desktop. When I type the command sudo pacman -S flashplugin or sudo pacman -S archey it tells me that it cannot find the package.
I had this problem previously when I was trying arch in a VM, and I couldn't figure out what I had missed. I have everything else properly installed and working fine, it's just these two packages I've come across that I cannot locate. I'm guessing there's probably more packages that I just haven't run into yet that wouldn't work either.
Last edited by Socialsymbol (2010-06-29 23:00:00)

Shazzam6999 wrote:
That's because archey is in the AUR. You can use yaourt to install packages from the aur similar to how you're trying, read the wikis and check it out.
http://wiki.archlinux.org/index.php/Arc … Repository
http://wiki.archlinux.org/index.php/Yaourt
Ok, thanks, I had forgotten about that.
When do they suspect they'll fix the flashplugin bug/vulnerability? And what is recommended to do until then as far as flash playback goes?
Last edited by Socialsymbol (2010-06-29 22:51:14)

Help JDeveloper cannot find package

Hi,
I am using JDeveloper 9.0.3.4.
In the project settings -->Configurations -->Development --> Libraries, I add JSP Runtime, J2EE, Servlet Runtime. But When I tried to rebuild my project, I got errors like:
(1) package javax.servlet.jsp does not exist;
(2) cannot resolve symbol on import javax.servlet.http.HttpServletRequest;
(3)javax.servlet.http.HttpServletRequest is not public in javax.servlet.http; cannot be accessed from outside package.
Can you help?
Many thanks,

Add lib/j2ee.jar from the J2sdkee installation in the project Classpath with Paths>Additional Paths in the project properties frame.

HT201303 Please help me to check my acc: i cannot find where i can change the question security.

i cannot find the button which i can change the question surcurity. please help me
<Email Edited by Host>

http://support.apple.com/kb/HT5312
-If you established a rescue email address, there will be a link on the "Passwords & Security" page of id.apple.com. Clicking the link will send the reset to your rescue email address (NOTE: This is not the same address as your Apple ID email)
-If there is no link on the page, then you didn't establish a rescue email address. Contact AppleCare at 800.694.7466 (If you are in the US), and ask for account security. You will need to answer some questions to verify your identity, AND you will need access to a computer to generate a temporary support pin.
-If you are not in the US, click http://support.apple.com/kb/HT5699 - Apple ID: Contacting Apple for help with Apple ID account security
HTH

I cannot find my trash can

For some reason I cannot locate my trash can. I looked at a recent doc I sent there and followed the path, but it's not there. The strange part is the folder name appears to be ".trash" now. Any ideas out there?
Victor

You may try to remove this preference file
Open finder. Click on Goto pressing alt and you will see Library. Open Library
Move the com.apple.finder.plist file from the Preferences folder to the Desktop.
Restart you Mac.
If your Trash Can is in his position delete the com.apple.finder.plist.
If you get other problems restore this file in its original position.

ITunes cannot find but I can ( ! ) - how do I fix this?

I recently upgraded to a larger capacity drive and copied my library to the new drive but also kept a backup on the old drive. Now on the new drive, I have a ton of those exclamation points and iTunes cannot find a lot of the songs. It is making me find them one song at a time. How can I keep my new drive as the location where iTunes is stored (using the Advanced section of preferences for iTunes music folder location) but get iTunes to fix these that it cannot locate? And if I can locate them one at a time just by going back to the backup, why can't iTunes figure that out on its own? I'm not even sure why this happened, since I did the Consolidate and Keep iTunes folder organized functions when transferring to the new drive. Please help!

Hi - the original files were copied to the new drive and unfortunately, were deleted from the old drive. But what I do have on the old drive, and iTunes seems to be able to use it when it wants me to locate the songs one by one, is a backup copy of my library I made before the move to the new drive.
Since moving, I set the new drive location as where the iTunes folder is stored, and the song information is all in the library on the new drive, but it confuses me why that info is there but the "sound" isn't. The files that are affected seem to be mostly the first files I loaded on when I got iTunes in December. A lot came from Windows media. I wish I could understand why if it has me "locate" it, it can then fix the problem (although that has to be done song-by-song) but yet it cannot seem to link to the entire folder and I have to do this one song at a time. Would it be possible to put that backup folder on a CD, and create CD backups of my functioning library on the new drive, and then reinstall iTunes on the new drive using the multiple CDs? Would it let me use CD backups created in two different backups, and extract what each backup had to thus make my library complete again (between the two backups, that would be my entire library.)

Hello, I cannot find my music Can some one walk me through it?

Hello, I cannot find my music. Can someone walk me through it? Thank you

Look on your computer.
Without more details... I do not know many people that would take the significant time necessary to detail out every possible scenario.

Cannot find PPoE host, can connect to router but not internet

I've been having trouble since I tried using the router. At first, I had no security, then I set up the security and couldn't connect to the router. That finally solved, sometimes when trying to connect to the router, I get the message cannot find PPoE host. But, my connection continues to show that it is strong in the bar at the top.
So, I try to get on the internet -- Safari, Firefox -- no go.
I run network diagnostics and the first three settings are lit, but the ISP, Internet and Server all show as failed.
I'm connecting via airport and a linksys router.
Thanks for any help

You'll have to go into your router's settings and make sure they're correct. When you connect to the internet through a router, the router has to be set up with the appropriate IP information (like setting it for PPPoE). If you have set your router up properly, then all you have to do is connect your Mac to it, either wirelessly or over ethernet, and it should auto-configure if you have your Network settings on "DHCP" (not the manual DHCP, though). You will get an IP address assigned by your router if it worked.
Hope that helps. Networking is always confusing.

OWB11r2 data chunking: cannot find package DBMS_APPLY

Hi,
I'm trying the new data chunking feature of owb11r2. I got it running with serial strategy. But when I switch to parallel strategy, the mapping does not compile. It tries to call the package DBMS_APPLY, but that cannot be found:
DBMS_APPLY.INITIALIZE(..);
DBMS_APPLY.CHUNK_TABLE_BY_ROWID(..);
Target db is 11r2.
Any idea?
Regards,
Carsten.

Hi Carsten
There is a bug (9057172) logged for this. I have tried to workaround but couldn't find any mechanism.
Cheers
David

Cannot find package error and cannot resolve symbol error

Hi
I have a file Assignment.java in C:\TIJCode\c03 folder. But this file belongs to the default package. This file imports a package com.bruceeckel.simpletest which is in C:\TIJCode\ folder. Now this package has a file named Test.java which accesses a few more files fromt he same package.
I set the classpath to C:\TIJCode. When i try to run the Assignment file I get an error saying package com.bruceeckel.simpletest cannot be found and cannot resolve symbol error. symbol: Test Class: Assignment.
The files in com.bruceeckel.simpletest package were not compiled. So I first tried to do that. But I get a cannot resolve symbol error while trying to compile a file NumOfLinesException which inherits SImpleTestException file. The exact error message is
NumOfLinesException.java : 7 : cannot resolve symbol
symbol : class SimpleTestException
location : class com.bruceeckel.simpletest.NumOfLinesException extends SimpleTestException
The exact code in each of above mentioned files is
//: c03:Assignment.java
// Assignment with objects is a bit tricky.
// From 'Thinking in Java, 3rd ed.' (c) Bruce Eckel 2002
// www.BruceEckel.com. See copyright notice in CopyRight.txt.
import com.bruceeckel.simpletest.*;
class Number {
int i;
public class Assignment {
static Test monitor = new Test();
public static void main(String[] args) {
Number n1 = new Number();
Number n2 = new Number();
n1.i = 9;
n2.i = 47;
System.out.println("1: n1.i: " + n1.i +
", n2.i: " + n2.i);
n1 = n2;
System.out.println("2: n1.i: " + n1.i +
", n2.i: " + n2.i);
n1.i = 27;
System.out.println("3: n1.i: " + n1.i +
", n2.i: " + n2.i);
monitor.expect(new String[] {
"1: n1.i: 9, n2.i: 47",
"2: n1.i: 47, n2.i: 47",
"3: n1.i: 27, n2.i: 27"
} ///:~
//: com:bruceeckel:simpletest:SimpleTestException.java
// From 'Thinking in Java, 3rd ed.' (c) Bruce Eckel 2002
// www.BruceEckel.com. See copyright notice in CopyRight.txt.
package com.bruceeckel.simpletest;
public class SimpleTestException extends RuntimeException {
public SimpleTestException(String msg) {
super(msg);
} ///:~
//: com:bruceeckel:simpletest:NumOfLinesException.java
// From 'Thinking in Java, 3rd ed.' (c) Bruce Eckel 2002
// www.BruceEckel.com. See copyright notice in CopyRight.txt.
package com.bruceeckel.simpletest;
public class NumOfLinesException extends SimpleTestException {
public NumOfLinesException(int exp, int out) {
super("Number of lines of output and "
+ "expected output did not match.\n" +
"expected: <" + exp + ">\n" +
"output: <" + out + "> lines)");
} ///:~
//: com:bruceeckel:simpletest:Test.java
// Simple utility for testing program output. Intercepts
// System.out to print both to the console and a buffer.
// From 'Thinking in Java, 3rd ed.' (c) Bruce Eckel 2002
// www.BruceEckel.com. See copyright notice in CopyRight.txt.
package com.bruceeckel.simpletest;
import java.io.*;
import java.util.*;
import java.util.regex.*;
public class Test {
// Bit-shifted so they can be added together:
public static final int
EXACT = 1 << 0, // Lines must match exactly
AT_LEAST = 1 << 1, // Must be at least these lines
IGNORE_ORDER = 1 << 2, // Ignore line order
WAIT = 1 << 3; // Delay until all lines are output
private String className;
private TestStream testStream;
public Test() {
// Discover the name of the class this
// object was created within:
className =
new Throwable().getStackTrace()[1].getClassName();
testStream = new TestStream(className);
public static List fileToList(String fname) {
ArrayList list = new ArrayList();
try {
BufferedReader in =
new BufferedReader(new FileReader(fname));
try {
String line;
while((line = in.readLine()) != null) {
if(fname.endsWith(".txt"))
list.add(line);
else
list.add(new TestExpression(line));
} finally {
in.close();
} catch (IOException e) {
throw new RuntimeException(e);
return list;
public static List arrayToList(Object[] array) {
List l = new ArrayList();
for(int i = 0; i < array.length; i++) {
if(array[i] instanceof TestExpression) {
TestExpression re = (TestExpression)array;
for(int j = 0; j < re.getNumber(); j++)
l.add(re);
} else {
l.add(new TestExpression(array[i].toString()));
return l;
public void expect(Object[] exp, int flags) {
if((flags & WAIT) != 0)
while(testStream.numOfLines < exp.length) {
try {
Thread.sleep(1000);
} catch (InterruptedException e) {
throw new RuntimeException(e);
List output = fileToList(className + "Output.txt");
if((flags & IGNORE_ORDER) == IGNORE_ORDER)
OutputVerifier.verifyIgnoreOrder(output, exp);
else if((flags & AT_LEAST) == AT_LEAST)
OutputVerifier.verifyAtLeast(output,
arrayToList(exp));
else
OutputVerifier.verify(output, arrayToList(exp));
// Clean up the output file - see c06:Detergent.java
testStream.openOutputFile();
public void expect(Object[] expected) {
expect(expected, EXACT);
public void expect(Object[] expectFirst,
String fname, int flags) {
List expected = fileToList(fname);
for(int i = 0; i < expectFirst.length; i++)
expected.add(i, expectFirst[i]);
expect(expected.toArray(), flags);
public void expect(Object[] expectFirst, String fname) {
expect(expectFirst, fname, EXACT);
public void expect(String fname) {
expect(new Object[] {}, fname, EXACT);
} ///:~

What do you have in the C:\TIJCode\ directory? Does the directory structure mimic the package structure for the stuff you're importing?

Cannot find package javax.servlet.*

Hi All,
I'm trying to run the "make all" in the Wrox J2ee bea book and am running in to errors that all seem to stem from the fact that the javax.servlet.* packages do not exist. After looking around it seems that this package should be in the weblogicaux.jar file. I do not have that jar file in my install. Anyone know where i can either get that weblogicaux.jar file or any file which has the javax.servlet packages. Any help would be much appreciated.
Hoony
weblogic 5.1.0

That jar file should be located in %WebLogichome%\lib.
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
"Hoony Youn" <[email protected]> wrote in message
news:3a70280f$[email protected]..
>
Hi All,
I'm trying to run the "make all" in the Wrox J2ee bea book and am runningin to errors that all seem to stem from the fact that the javax.servlet.*
packages do not exist. After looking around it seems that this package
should be in the weblogicaux.jar file. I do not have that jar file in my
install. Anyone know where i can either get that weblogicaux.jar file or
any file which has the javax.servlet packages. Any help would be much
appreciated.
>
Hoony
weblogic 5.1.0

I need firefox 3.6.19 but cannot find it,,where can I find it?

I need 3.6.19 as I play fallensword and fallensword helper does not work with anything else...where can I find it please?

It appears that fallenswoed helper is a GreaseMonkey script, have you got the greaseMonkey Add-on installed ?
I imagine that 3.6.19 is a slightly earlier version missing a security update, compared with Firefox 3.6.20. It would be unusual for an application to not work in Firefox 3.6.20 if it works in 3.6.19
I note http://code.google.com/p/fallenswordhelper/wiki/Installation that from the installation notes fallenswordhelper seems to work with Firefox 4+

Sun One cannot find package ?

hi to all,
i am trying to run my web application from sun one studio 5 SE, to utilise the debugging functionality that i cant get working in intellij or jbuilder :( (intellij wont iinstall on 2003 server and jbuilder crashes when in debug mode )
anyways my app works fine by all accounts but when i mounted the filesystem inside SOS and i try and compile i get the following
login$jsp.java [6:1] package org.apache.jasper.runtime does not exist
import org.apache.jasper.runtime.*;
^
login$jsp.java [9:1] cannot resolve symbol
symbol : class HttpJspBase
location: class org.apache.jsp.login$jsp
public class login$jsp extends HttpJspBase {
                               ^
login$jsp.java [35:1] package org.apache.jasper.runtime does not exist
    public final void _jspx_init() throws org.apache.jasper.runtime.JspException {
                                                                   ^
login$jsp.java [86:1] cannot resolve symbol
symbol : method getClass ()
location: class org.apache.jsp.login$jsp
                            auth = (xns.beans.Authenticator) java.beans.Beans.instantiate(this.getClass().getClassLoader(), "xns.beans.Authenticator");
                                                                                          ^
login$jsp.java [105:1] cannot resolve symbol
symbol : variable JspRuntimeLibrary
location: class org.apache.jsp.login$jsp
                JspRuntimeLibrary.introspect(pageContext.findAttribute("auth"), request);
                ^
login$jsp.java [145:1] cannot resolve symbol
symbol : variable JspRuntimeLibrary
location: class org.apache.jsp.login$jsp
                out.print(JspRuntimeLibrary.toString((((xns.beans.Authenticator)pageContext.findAttribute("auth")).getUsername())));
                          ^
login$jsp.java [170:1] cannot resolve symbol
symbol : variable JspRuntimeLibrary
location: class org.apache.jsp.login$jsp
                out.print(JspRuntimeLibrary.toString((((xns.beans.Authenticator)pageContext.findAttribute("auth")).getError())));
                          ^
7 errors
Errors compiling login.this happens with both the default internal SOS server and a tomcat 4.1 installation i have on same machine.
i also mounted the jars that are in the server/lib dir of the tomcat install (i thought the server would have already mounted them) but this didnt help either
any ideas pls, i need to extend this application and cant do it without debugging
kind regards
g00fy

Hi Guys
I found the answer already...
u have to put jsse.jar , jnet.jar , jcert.jar in jdk1.31./jre/lib/ext folder
And set some provider in java.security
while it was done automatically in jdk1.4.1

Asant cannot find package, javac can??

Similar Messages

Maybe you are looking for