ASAP:Debugging

Have written some coding in the user exit how to debug it?

Hi Saranya,
    Never ever use break-point in general, always be specific when you want to debug a exit. Use the following syntax :
BREAK <USERID>
Hope this is helpful to you. If you need further information, revert back.
Reward all the helpful answers.
Regards
Nagaraj T

Similar Messages

  • Need help asap. Can't open project in PP CS6 Debug Event, Need help asap. Can't open project in PP CS6 Debug Event

    I sat up all night, last night, editing a movie for a school project which is due Friday. I am extremely busy, and as i opened the file this morning to show the progress to a partner, Premiere, told me "Premiere pro has encountered an error" - "[c:\Mightykilt64\shared\adobe\mediacore\mediafoundation\api\inc\keyfra" - I click continue, and it says "The project could not be loaded, it may be damaged or contain outdated elements"
    I am so frustrated as i'm super busy, and on top of that i'm no computer genious, i really really hope someone can help, i need it asap! I use windows 8 btw..

    Gaps can be very small, and almost impossible to actually see.
    First, I zoom in on the Timeline, to the Frame-level, and step through the Timeline, or play it, looking for a flash of black.
    Next, I will hit Home, to get to the beginning of the Timeline, and then use the PageUP/PageDN keys to step through, Clip by Clip. I watch the CTI (Current Time Indicator w/ the red Edit Line) carefully. It should smoothly jump from Clip to Clip. With a tiny gap, say 1 Frame, the CTI will "hiccup," or "bounce." That is where the Gap is. How one fixes it will depend on where the gap is, and what one wants. Say that it's between two stills, I would then drag the Head of one, or the Tail of the other, to fill that gap. If it's between Video Clips, other choices might work best.
    PrE has a "Close Gaps" function, but if one has Audio that covers that gap, it will not work.
    One trick, that can get you to Transcoding is to add Transparent Video. Drag that to Video Track above all of your existing Video Clips, and extend it to "cover" the entire Timeline. The limitation of this method is that if there is a gap, there will be a black flash in the Video. If only 1 Frame, that might go undetected.
    Usually, when one gets the ":Failure to Return Frame," there is a % of the Timeline, also listed. One can do the math to locate that on the Timeline. As PrE does a two-pass Transcode, then 100% of the Transcode is through two passes. The full Duration of the Timeline is at 50%, as that is the end of the first pass. That can be a bit confusing, as a glitch at 75% would mean that half-way through the second pass, there was an issue detected. Usually, if there is a glitch, it will be discovered in the first pass.
    Good luck,
    Hunt

  • How to Validate Schedule Line in Debugging

    Hi,
    When saving the Schedule Lines a spool was getting created and from the spool I'm able print the output.
    But to validate the values I have to get into the debugging mode. But from the spool it is not goint into debugging.
    As I have to finish it by tomorrow, Kindly help me ASAP.
    Thanks,
    Kishore.

    Hi Kishore,
                  Try with the below solution definitely u wont get any problem.
    If already the spool is processed, then you cannot get the output on the screen from ME90.
    So, after saving the schedule lines go to t.code ME90 and provide the Doc.No, Message application as 'EL', Message type as output type and Processing status as '0', Now execute.
    Select the document and click on disply. If you wnat to go through Debug, then before this process activate the layout debugger.
    Regards,
    Sunil.

  • Debugging in XI

    Hi gurus,
        I have a scenario having file on the sender side and ABAP Proxy on the receiver side.The mapping used is XSLT mapping.To determine the receiver,Receiver determination is being used.There are 2 XSLT mappings under the Interface mapping.
        I want to ddebug the entire scenario to check the message flow.I tried doing the same in Interface mapping --> Test --> Debug,but it was not very helpful in determining the problem being faced by the interface.
        Are there any better ways of debugging by which I can debug the entire interface ? If so please let me know the steps.can I do any debugging using Runtime Workbench / sxmb_moni ? please let me know the steps in that case.
        Please let me know asap.
    regards
    Debansu

    Hi Debansu,
    If you go through the architecture of XI , you would find a composite collection of various engines like adapter engine , integration engine , etc... your message passes through all these engines to appear as an output at the end of the integration pipeline.
    Now since these engines are different , they need independent debugging activities . There is no central place.
    I hope i have shed some light on the problem.
    Regards
    joel

  • How to debug 4.5.1 flex app in Black Berry play book?

    Hi ,
         i do want to know how to debug the 4.5.1 flex app in Blackberry playbook and the process  or do we need do enable any properties  plz let me help on this ASAP.
    Thanks

    Simeon,
    Thanks for that, I had a brainfart and forgot you can have the properties defined in that manner.  I changed it but it still wasn't working which made me realize I had to change the backgroundColor property on the view in Away3D.  I realized this after trying the params for the class and then not adding the view (which had a white bg) and then i looked at the docs and bam, there it was.  Thanks!
    Matt

  • Kernel Panic? - ASAP!

    Hello.
    To start off with, I am completely HOPELESS when it comes to computers, so I hope someone could help me out, and explain it in the simplest terms as possible!
    My MacBook Pro started coming up with a "Kernel Panic" once every 20 times I turned on my computer. Annoying, but I could deal with it. I was hoping the problem would go away and it was just something strange happening, but now it does it EVERY time I try to turn on my laptop, making it extremely difficult to get my laptop going.
    When I finally got my computer restarted, this came up :
    Thu Jan 6 17:39:06 2011
    panic(cpu 0 caller 0x2aab55): Kernel trap at 0x011ab93e, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x00100000, CR4: 0x00000668
    EAX: 0x00000000, EBX: 0x084b0000, ECX: 0x084e5980, EDX: 0x00000001
    CR2: 0x00000000, EBP: 0x52b9bd98, ESI: 0x00000000, EDI: 0x084bbf80
    EFL: 0x00010202, EIP: 0x011ab93e, CS: 0x00000008, DS: 0x03660010
    Error code: 0x00000000
    Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
    0x52b9bb98 : 0x21b50c (0x5d42fc 0x52b9bbcc 0x223974 0x0)
    0x52b9bbe8 : 0x2aab55 (0x59616c 0x11ab93e 0xe 0x596336)
    0x52b9bcc8 : 0x2a09a8 (0x52b9bce0 0x1 0x52b9bd98 0x11ab93e)
    0x52b9bcd8 : 0x11ab93e (0xe 0x48 0x52b90010 0x220010)
    0x52b9bd98 : 0x11b09a1 (0x84b0000 0x11c8e00 0x0 0x0)
    0x52b9be18 : 0x53ca9e (0x84b0000 0x84bbf80 0x1 0x4ff9d6)
    0x52b9be78 : 0x53acd3 (0x84bbf80 0x84b0000 0x84eb340 0x94)
    0x52b9bf28 : 0x53b264 (0x84bbf80 0x84b5a80 0x0 0xffffffff)
    0x52b9bf78 : 0x53cf13 (0x84bbf80 0x0 0x52b9bfac 0x1)
    0x52b9bfc8 : 0x2a06cc (0x84b3700 0x0 0x2a06db 0x8419000)
    Kernel Extensions in backtrace (with dependencies):
    com.apple.driver.AppleFWOHCI(4.7.1)@0x11a9000->0x11cffff
    dependency: com.apple.iokit.IOPCIFamily(2.6)@0x927000
    dependency: com.apple.iokit.IOFireWireFamily(4.2.6)@0x1166000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    Not yet set
    Kernel version:
    Darwin Kernel Version 10.5.0: Fri Nov 5 23:20:39 PDT 2010; root:xnu-1504.9.17~1/RELEASE_I386
    System model name: MacBookPro7,1 (Mac-F222BEC8)
    System uptime in nanoseconds: 390196960
    unloaded kexts:
    (none)
    loaded kexts:
    com.apple.driver.AppleFWOHCI 4.7.1 - last loaded 389164366
    com.apple.iokit.AppleBCM5701Ethernet 2.3.9b6
    com.apple.driver.AppleUSBHub 4.1.7
    com.apple.driver.AppleSmartBatteryManager 160.0.0
    com.apple.driver.AppleAHCIPort 2.1.5
    com.apple.driver.AirPortBrcm43xx 423.91.27
    com.apple.driver.AirPortBrcm43224 426.36.1
    com.apple.BootCache 31
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.driver.AppleUSBEHCI 4.1.7
    com.apple.driver.AppleUSBOHCI 4.1.5
    com.apple.driver.AppleEFINVRAM 1.4.0
    com.apple.driver.AppleRTC 1.3.1
    com.apple.driver.AppleHPET 1.5
    com.apple.driver.AppleACPIButtons 1.3.5
    com.apple.driver.AppleSMBIOS 1.6
    com.apple.driver.AppleACPIEC 1.3.5
    com.apple.driver.AppleAPIC 1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
    com.apple.security.sandbox 1
    com.apple.security.quarantine 0
    com.apple.nke.applicationfirewall 2.1.11
    com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
    com.apple.iokit.IOFireWireFamily 4.2.6
    com.apple.iokit.IOUSBUserClient 4.1.5
    com.apple.iokit.IOAHCIFamily 2.0.4
    com.apple.iokit.IO80211Family 312
    com.apple.driver.AppleMCP89RootPortPM 1.11
    com.apple.driver.AppleFileSystemDriver 2.0
    com.apple.iokit.IONetworkingFamily 1.9
    com.apple.iokit.IOUSBFamily 4.1.7
    com.apple.driver.NVSMU 2.2.7
    com.apple.driver.AppleEFIRuntime 1.4.0
    com.apple.iokit.IOHIDFamily 1.6.5
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 6
    com.apple.driver.DiskImages 289
    com.apple.iokit.IOStorageFamily 1.6.2
    com.apple.driver.AppleACPIPlatform 1.3.5
    com.apple.iokit.IOPCIFamily 2.6
    com.apple.iokit.IOACPIFamily 1.3.0
    Model: MacBookPro7,1, BootROM MBP71.0039.B0B, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f6
    Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.131.36.1)
    Bluetooth: Version 2.3.8f7, 2 service, 19 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Serial ATA Device: TOSHIBA MK2555GSXF, 232.89 GB
    Serial ATA Device: MATSHITADVD-R UJ-898
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24600000
    USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0x26100000
    USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8213, 0x06610000
    USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x06500000
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0x06300000
    I have absolutely NO idea what this means, or if it means anything at all for that matter, but I'm hoping someone can tell me what is wrong with my computer. Can this be fixed by a technological illiterate person like myself, or will I have to take it into the Apple Store to get it fixed?
    Thank you very much!! I'd like to get advice on this ASAP seeing as I need a computer for classes, so I need to know if I should pick up a back-up computer or not.

    See
    What is a kernel panic,
    Technical Note TN2063: Understanding and Debugging Kernel Panics,
    Mac OS X Kernel Panic FAQ,
    Resolving Kernel Panics, and
    Tutorial: Avoiding and eliminating Kernel panics for more details.

  • App working fine in debug mode but not otherwise on iPad

    Hi everyone,
    Sorry if I am putting this question in wrong section, this seems to be the most relative location to ask question.
    My Problem:
    I have developed an app using Adobe Air and starling. App is working perfectly when I run on Flash Builder (debug and run both). When deploying on iPad at one particular location, it is either not getting TouchPhase.ENDED or some code is crashing.
    I tried to debug while running app on iPad and its working absolutely fine. But when I create the ipa file normally i.e. without debug mode, at a particular location code is not working.
    Please help me out in this regard, asap. I need to deliver it.
    Please!!!!
    Thanks
    Waqar Iqbal

    Hi,
    I know one case, but don't know if have a solution.
    See Registering Add-on in 2004
    Best Regards.

  • Excel stays live as a process when terminating a program during debug

    Hi
    In my C# windows application I open an excel file with
    Excel.Application xlApp = new Excel.ApplicationClass();
    when in debug mode in VS I often stop the application mid process by clicking on "stop debugging" in the VS menu. I noticed that this seems to leave many opened
    EXCEL.EXE *32 processes (I see them in task manager)
    This eventually clogs my computer.
    I assume it is because the application never reached the
    xlApp.Quit();
    which I have when the application is in ordinary mode.
    What can I do about it so that I would not have all these processes staying alive after I stopped the program midway in debug?

    Hello,
    The short answer is too keep Task Manager open to the process tab and kill Excel when you stop prior to a normal termination of the project in debug mode.
    The proper method to shut Excel down is shown below. Now if you are not doing it this way most likely Excel is being disposed of when closing the form which has the Excel code in it or when the initial form closes.
    Very simple example to dispose of objects ASAP 
    using Excel = Microsoft.Office.Interop.Excel;
    private void button1_Click(object sender, EventArgs e)
    OpenExcelExample("SomeExcelFile.xlsx", "Sheet1");
    public void OpenExcelExample(string FileName, string SheetName)
    if (System.IO.File.Exists(FileName))
    bool Proceed = false;
    Excel.Application xlApp = null;
    Excel.Workbooks xlWorkBooks = null;
    Excel.Workbook xlWorkBook = null;
    Excel.Worksheet xlWorkSheet = null;
    Excel.Sheets xlWorkSheets = null;
    Excel.Range xlCells = null;
    xlApp = new Excel.Application();
    xlApp.DisplayAlerts = false;
    xlWorkBooks = xlApp.Workbooks;
    xlWorkBook = xlWorkBooks.Open(FileName);
    xlApp.Visible = false;
    xlWorkSheets = xlWorkBook.Sheets;
    // For/Next finds our sheet
    for (int x = 1; x <= xlWorkSheets.Count; x++)
    xlWorkSheet = (Excel.Worksheet)xlWorkSheets.get_Item(x);
    if (xlWorkSheet.Name == SheetName)
    Proceed = true;
    break;
    System.Runtime.InteropServices.Marshal.FinalReleaseComObject(xlWorkSheet);
    xlWorkSheet = null;
    if (Proceed)
    Excel.Range xlRange1 = null;
    xlRange1 = xlWorkSheet.get_Range("A1");
    xlRange1.Value = "Hello";
    Marshal.FinalReleaseComObject(xlRange1);
    xlRange1 = null;
    xlWorkSheet.SaveAs(FileName);
    else
    MessageBox.Show(SheetName + " not found.");
    xlWorkBook.Close();
    xlApp.UserControl = true;
    xlApp.Quit();
    ReleaseComObject(xlCells);
    ReleaseComObject(xlWorkSheets);
    ReleaseComObject(xlWorkSheet);
    ReleaseComObject(xlWorkBook);
    ReleaseComObject(xlWorkBooks);
    ReleaseComObject(xlApp);
    MessageBox.Show("Done");
    else
    MessageBox.Show("'" + FileName + "' not located. Try one of the write examples first.");
    private void ReleaseComObject(object obj)
    try
    if (obj != null)
    System.Runtime.InteropServices.Marshal.ReleaseComObject(obj);
    obj = null;
    catch
    obj = null;
    If you don't have other instances open outside of Visual Studio you could write a utility to shut down all instances of Excel but why when you can do this in Task Manager process tab.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

  • Debugging the webdynpro program

    Hi ,
    I want to do external debugging in my program,how to set a external break point in the function module in ABAP.If a click the stop button ,it is creating session break point..,but I need to set a external break point.Help me ASAP.

    Hi Bharath,
    Try this Link:
    Link:https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0e9a9d90-0201-0010-478e-991dbea73a30
    Regards,
    Prasanna.

  • How to debug an Application Service?

    Hi,
    I have created an application Service which has  been exposed as as a Web Service. Now how can I debug the Web Service or in other words the application service.
    I have started the CE server in debug mode and I am able to debug WebDynpro Applications.
    I am working on SAP CE 7.1.
    Please reply ASAP.
    Regards,
    Manish Sethi

    Hi Manish
    follow this tutorial it describes how to configure and use the SAP NetWeaver Developer Studio and the J2EE Engine for debugging CAF Application Service.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9db6c4ea-0c01-0010-15b1-f72f12aade28
    thanks
    Asif

  • Problem connecting to debug player

    I'm at my wits end here. Whenever I try to debug a project I get the error saying that it failed to connect, make sure the debug player is installed. I've gone through all the usual steps and the debugger version of the plugin is defininitely installed. I'm getting the same error whether I use IE or Firefox as the external browser, so it has to be something related to FlashBuilder itself right? I've tried everything I can think of including deleting the .metadat folder and starting fresh. Can anyone shed some light on what's going on here?

    This image is the error I get every time I try to run the debugger.
    This second image comes a minute or two after the first, regardless of whether I choose "yes" or "no" on the first error.
    I am a web design/development student.  My Actonscript 3.0 class requires Flash Builder and the debugger.  I am already 4 assignmets behind b/c I am unable to get it working correctly.  I apologize, but I don't completely understand all of the suggestions posted in the forum.  If you could explain them as simple as possible I would really really be grateful.  Also, whenever I try to right-click in the running ap, as the last solution instructs, I don't even get the debugger option.  This is what I get instead.
    I've tried to uninstall/reinstall both Flash Builder and Flash Player without any luck.  I really need this resolved asap or I'm afraid I may have to drop this class and honestly speaking, dropping the class is not a viable option.  Due to my recent layoff, my school is being funded through the federal TAA program and they have strict timelines about how long I have to complete school.  If I drop the class I will miss the deadline.  Please, please help me resolve the issue.   I am using the latest version Flash Builder available to date, running Windows 7 64bit and the latest version of Flash Player.  Originally I just happened to be using Chrome as a browser, but I normally use Firefox.  I also have Opera, Safari and IE installed but had the same results when tested in each of these browsers.  Again, please make the instructions as simple as possible as I am a web student and don't know much else.  Thanks in advance to anyone that can help b/c I desparetly need some help.

  • Compiling/Debugging AIR App. on Samsung Galaxy Tab

    Hey guys,
    I'm currently testing/making a mobile app with Burrito/Hero SDK.  I am successfully compiling and debugging on my Droid 2 - there are certain settings on the phone that allows USB Debugging mode and also allows "unknown sources" (non-market applications) to be installed.
    I want to be able to run/install the application on a Samsung Galaxy Tab - I want to see how it looks on a bigger resolution.  I am not able to turn on USB debugging on this device, therefore, cannot debug or install on the device.
    Has anybody tried this?  Or does anybody know how to root the install so I can test my application?
    Thanks! Cheers!
    -Joe

    Hi!
    I tried this, but no good results either.
    When I did a number of google searches I came into conclusion that there's no Galaxy Tab drivers yet bundled with the Burrito. Then I tried to google the tab drivers for MacOS but couldn't find them either. So I guess that's the basic reason that Burrito team chose include just a subset of devices for the beta - or then Samsung has been postponing the mac driver implementation?
    I assume you could tweak even FB4 to build to Android if you manually edit settings and configs and hunt the drivers and deploy AndroidSDK. But didn't want to go there...
    I hope to have the galaxytab working asap since from my point of view that's the most interesting target environment (at the moment) because of the larger touch screen size and presumeably better CPU.
    PS. Has Adobe guesstimated about FB4.5 release date yet?
    -Lauri

  • For Debug Problem.....

    Hi All..
               I am doing Webdybpro application. For that i am putting break point in Funtion Module side(ABAP). Still Friday break points are working.
              But today moring onwards the break point are not working. So i am unable to debug the function module code from Webdynpro side.
             Anyone knows what is the reason...?
             Please reply ASAP....
    Thanks and Regards
    Gobinath.R

    Hi gobinath,
    check in your visual adim..do the following steps
    1)Go to VA->configuration Adapter->cluster_data
    2)Expand clusted data and find Propertysheet--->Switch to change mode
    3)Change Server's debug mode to 'yes'
    4)Click on the pencil icon in the tool bar and confirm.
    5)Log off VA and restart the sever
    refer the following thread
    Debugging in Webdynpro java?
    Re: Debugging ABAP Code From Within WebDynpro
    Regards,
    P.Manivannan

  • MSI X99S Gaming 7 and debug code 67

    Hi,
    I have MSI X99S Gaming 7 motherboard, Crucial 2x8GB 2133 DDR4, MSI GTX970 Gaming 4G, Corsair RM650, i7-5820k setup.
    When I am trying to boot the machine it always stops and the debug led shows code 67. I have tried to take everything out, reseated processor and to boot with just the minimum set of components. Result is always the same code 67.
    I am running out of ideas. Do you have any hints or should I just return the mobo and processor?
    Best Regards,
    juha

    Quote from: shadow85 on 22-December-14, 19:40:31
    So are you going to RMA the board or just use it with 2 sticks? Thats means you are not planning on using it in quad channel, would be a waste.
    Anyways if I were you I would definatly RMA it asap. This error 67 problem people are having seems to be widespread.  MSI really need to look into this.
    As has been said previously, contact MSI. Should they look into it? Yes, but the moderators here are not MSI employees, and while we can bring issues to their attention, we cannot make them look into problems.
    So if you have this problem, please contact MSI directly:  >>How to contact MSI.<<

  • Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input

    Dear Friends,
    We are facing a serious problem for debugging. Expecting valuable input for the same.
    Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input in Production Server.
    The debugging (for WebDynpro-ABAP application) is working in Dev. Server for
    1st ] Within R/3
    Ex. debug for bapi within R/3. i.e. value enter as input in R/3 only.
    2nd ] From webpage to R/3
    Ex. Some input given on the internet web page developed through WebDynpro and external breakpoint set in R/3 it works. It directs to R/3 code through debugging.
    In Prod. Server the 1st case above is working but the 2nd case is not working.
    In Prod. Server the WebDynpro developed applications are running successfully through internet explorer webpage inputs. So running the application is not a problem in prod. Server but debugging of the same is the problem.
    The setting which are done in Prod. server are,
    1] RZ10 in parameters are set for port and host name.
    2.1] In SMICM check for ICM.
    2.2] Host file updated in Windows-System 32.
    3] In SICF following services are active,
    3.1] default_host/sap/bc/webdynpro
    3.2] default_host/sap/public/bc
    3.3] default_host/sap/public/bc/webdynpro/viewdesigner
    3.4] default_host/sap/bc/wdvd
    3.5] default_host/sap/public/icman
    3.6] default_host/sap/bc/gui/sap/its/webgui
    3.7] default_host/sap/public/ping
    3.8] default_host/sap/bc/error
    3.9] default_host/sap/bc/echo
    4] In SE80
    4.1] Internet services-System-are published
    4.2] Internet services-WEBGUI-are published
    4.3] Utilities-Setting-ABAP Editor-Debugging-Username & New Debugger set.
    4.4] Utilities-Setting-ABAP Editor-Editor-Front-End Editor(New) set.
    5] In Su01 for user profiles sap_all & sap_new is assigned and role  SAP_BC_WEBSERVICE_DEBUGGER is assigned.
    6] The support packages are also updated to latest level.
    7] Gone through following links but not getting any clues.
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/74d50bd1431b5ae10000000a42189c/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/EN/77/3545415ea6f523e10000000a155106/frameset.htm
    Thanks in Advance.
    Best Regards,
    Abhijit.

    No cross posting
    Read the "Rules of Engagament"
    Regards
    Juan

Maybe you are looking for