ASBN creation in iSupplier - PO details not appearing on Create ASBN page

Hi,
I have created PO in Purchasing.
In iSupplier Portal,the PO details are appearing on the Create Advance Shipment Notice page but the PO details are NOT appearing on the Create Advance Shipment Billing Notice page.
Oracle Applications : 12.1.3

HI,
Thanks for your reply.
I havent done any sourcing yet, because i was not able to proceed with creation of RFI because my items after approval was not appearing.
FYI.
This sceanrio is already escalated to OSS, i need to verify if this is an isolated case, product error or user error.
Please help!
many thanks!

Similar Messages

Create Item column is not appearing in the "Personalize Page"

Hi All,
I am working in R12 upgrade project.
I have to create item(Link) in a table region as per the requirement.
But that "Create Item" button rather the column is not appearing in that "Personalize Page" when I click on the Personalize Page link of the concerned page.
Can anyone please suggest Do I have to do any setup or any profile option needs to be enabled.
Thanks,
Raja Dutta

Hi,
Enable profile 'FND: Personalization Seeding Mode', clear the cache and check if this solves your problem.
--Sushant

Details not appearing in the dropdown list in the filter window

Dear All,
   I have come accross a unique problem. I have made a user defined query. Now there is an item code column. I want to filter the item codes in the generated query. But all the items are not appearing in the filter window> item field> dropdown. My query output shows all the items but the filter does not!!!
   I have 10,000 items where the codes are ranged from A to X with various serials. When I run the query the report shows all the items which are within the query conditions. But when I open the filter window then in the dropdown for the item code only codes upto "G" appear.
   How can this be resolved?? otherwise I am not able to filter my selections.
Regards,
Raja

hi suda,
The query is to generate a report to find out the total units of items sold through delivery. Actually, there is no problem with the query. The query shows absolute reports. The problem is among these 10,000 items which come in the report, if I need to see some specific item then I can use the filter option. But in the filter option the items codes upto "G" are only appearing inspite of the fact that the query report list has all the items from A-J.
I hope I am clear. This is not the problem with this query only. In all the queries where the item details are appearing, the system doesnot give me the flexibility to filter by all the items rather only upto a range. Why is it so?
Still if you need to see the query then please let me know. I will put in the query statement.
Regards,
Raj

Tax details not appearing in the purchase order

Dear Gurus,
Am using tax procedure TAXINN. and i have maintained the respective values for the condition type even though while creating purchase order am trying to click the TAXES button but its not simulating the values that pop up taxes screen is not appearing. but all the CIN settings maintained correctly in J1ID also the values maintained correctly..
any other setting is required...
Please advise me..
Regards
Anand

Check tax code is assigned to company code in CIN SPRO settings.

Create Asset Master Button does not appear while creating SC.

Dear Friends,
We are working on SRM 5 and trying SSP with classic scenario. The issue is while creating Shopping cart for account assignment Asset, system does not display Create Asset Master button.
We have maintained following configuration in our SRM system.
1. The authorizations object M_BBP_*** is setup and activated for Employee creating shopping cart as well as RFC user.
2. Attribute Asset Class (ANK) is maintained in Organization structure as per Backend asset class
3. Attribute Account Assignment Category (KNT) is maintained for Asset in Organization structure
4. GL account for product category and account assignment is maintained
Still while creating Shopping cart for Account assignment Asset system does not display button Create Asset Master.
Any idea which setting I am missing?
In R/3 I am able to create Asset master while creating Purchase Requisition.
Regards,
Sandeep Parab

Hi
Please go through this ->
http://help.sap.com/saphelp_srm50/helpdata/en/03/340ff8a5c711d4b2d8000102ade1c8/frameset.htm
Asset Procurement in EBP
Re: Asset number creation in EBP ?
Asset Procurement in SRM 5.0
Re: Cost center in asset item
Note 492107 - Account assignment with asset (changes in EBP)
Note 492073 - Account assignment to asset when creating a shopping basket
Note 897843 - Mixed account assignment types with asset in extended PO
Note 732374 - No default values from attributes for account assignment
Note 921767 - Default settings: Account assignment data is blank in ECS
Note 588898 - Additional documentation for SAP Enterprise Buyer 3.0
Note 575654 - Additional documentation for SAP Enterprise Buyer 3.5
Note 750381 - Asset master number is not transferred from details (2)
Note 674802 - Asset master number is not transferred from details
Note 484020 - No Asset Class Description when creating asset master
Note 936541 - Subsequent note to Note 543055
Note 613671 - RAISE COMPANY_CODE_NOT_VALID with enclosure creation
Note 455124 - Error message on unavailable asset class
Note 579900 - Account assgnmnt screen 2000: asset class transltd incrrctly
Note 399377 - EBP transfer of the asset text via EBP (as of Release 4.5)
Note 493512 - EBP: Message 197 (BBP_PD) not displayed by system
Note 423307 - Messages (BBP_PD) 193/194/195/197/202 translated incorrectly
Note 202684 - No derived account asgnmnt information frm back end
Regards
- Atul

Shipping data tab not appearing while creating intercomapny STO PO

Hi all,
I am processing the intercompany stock transfer scenario. I have done all the necessary settings for the plant and intercompany billing, but while creating the purchase order I am unable to get the shipping tab as the system cant read the shipping data for the respective vendor. In turn I cant see the purchase order in VL10B.
Kindly help in this.

Hi,
1. Please check in your vendor master in T-code XK03
2. In vendor master , the plant might have defined as plant as vendor in Tab purchasing data > Extras >additional purchasing data,
3.If plant field is not appearing there then change plant field in vendor account group field status maintenance from suppress to optional & maintain in vendor master.
Regards,
Ajit

Line item data does not appear on all master pages - Adobe forms

Hi Guys,
I have a problem in Adobe forms as explained below-
I have a page in the form which has, you can say, a 2 windows or subforms ( Information window/subfirm on top right corner, main on middle of the page ). The data of the main subform is a line item data of delivery. Some parts of the same data need to be printed on the Information subform also. The main subform can overflow to next pages but the information window will have only very limited data to be printed on one page itself, meaning it does not overflow.
Now the requirement is that each line item should be printed on a new page. For example if there are 2 lines items then first line item should be printed on first page. Then there will be a conditional page break and the next line item will be printed on the next page ( I have achieved this using condition page break). The information window will contain information related to corresponding line items. If the first line item data overflows in main then information window of first line item should be printed on first and 2nd page. The second line item should start printing on 3rd page and information window of 3rd page will contain data of 2nd line item.
I created 1 body page and 1 master page. I created one internal table with data of main window and information window. I put the information window on master page to make it appear on all the pages.
This solution unfortunately does not work. The issue is that in case of overflow, 1st page information window shows first line item. 2nd pages shows 2nd line item and 3rd page is blank whereas ideally 1st and 2nd page information window should show first line item and 3rd page should show 2nd line item. This means that master page and body page are not getting linked. If I create the information window on body page itself, it does not repeat on all the pages. Please provide some inputs to resolve the issue.
Thanks
Abhi

Hi Abhinav,
I am also trying to solve the similar issue. Need to print the internal table data in the Master page.
Have you resolved this issue. Can you Please share your solution .
Thanks
Swarna.

VPRS cond type is not appearing after creating a sales order

Dear Friends,
I have copied pricing procedure from Std pric procedure i.e from RVAA01.
In Material master in Accounting 1the following things are maintained,
Valuation Class--7920 ( Finished products)
VC Sales Order Stock--7920 ( Finished products)
Pricing Control-V ( Moving average Price/Periodic unit price)
Standard Price--- Blank
Price Unit--1
Total stock--100
In Pricing procedure VPrS cond type is included and settings are as follow,
Statistics---Relevant
Subtotal-- B ( carry over value to KOMP-WAVWR (cost))
Requirement--4
Item Catg is TAN and in Business data it is relevant for Determine Cost.
Activated cost determination for item categ TAN
But when I am creating sales order VPRS cond type is not appearing.
Analysis is saying
The requirement 004 is assigned to this condition in the pricing procedure. This requirement was not met and so the condition was excluded from further processing.
Can anybody tell me where I am going wrong?
Regards,
Shrikant

Hi Friends,
Thanks for your reply as per your instruction I have maintained cond type and also in Pric procedure I removed 4 from Requirement column.
Now I am getting following error,
Diagnosis
This condition has not been determined using condition records. The amount or value should be determined from another data source. For cost (condition category 'G') it is read using conditions from the material valuation segment, for a cash discount condition it is read using conditions from the terms of payment table.
In this transaction an error occurs - the material valuation segment or the terms of payment table could not be read or a currency translation has failed.
System Response
The condition has been provided with the deactivated indicator 'X'.
Procedure
Refer to the messages in the status line of the condition overview screen.
Regards,
Shrikant

Message Servers not appearing when creating JCO Destination

Hello Experts,
I had created a System Object in the Portal system landscape based on System Template (Template) and choosed SAP system with load balancing (to connect to R/3 server).
Given parameters to Connector, ITS, WAS and User management, when i test the connection test on these settings, All are successful except the connector settings. but when run the transaction code(System Administration -> support-> portal runtime-> SAP Transaction) by selecting this message server, it is executing.
And i want this message server to be selected when creating JCO destination.
This System Object is not showing in the message servers dropdown box selection when creating the JCO destinations.
What may be the issue.
Could anyone help me in solving this.
Thanks in advance
Regards
Sunil

Hi,
Have you checked the Technical systems in the SLD ? When you click on check sld , you appear an SLD url ,,,
Typing the same URL in browser and loging inwith SLD USER .... have you seen all the technical system which you want to appear while creating the JCO's ..
Regards,
Srini

Many images do not appear on numerous web pages. How can I fix this? I have graphics enabled.

For quite some time many images just do not appear on web pages. I have taken a screen shot of a page to show what the problem is but can find nowhere to upload it so you can see for yourselves. Now what do I do?

If images are missing then check that you aren't blocking images from some domains.
*Press the F10 key or tap the Alt key to bring up the hidden "Menu Bar" temporarily.
*Check the permissions for the domain in the currently selected tab in "Tools > Page Info > Permissions"
*Check "Tools > Page Info > Media" for blocked images
*Select the first image link and use the cursor Down key to scroll through the list.
*If an image in the list is grayed and "Block Images from..." has a check-mark then remove this check-mark to unblock images from this domain.
Make sure that you do not block (third-party) images, the permissions.default.image pref on the about:config page should be 1.
Make sure that you haven't enabled a High Contrast theme in the Windows/Mac Accessibility settings.
Make sure that you allow pages to choose their own colors.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
Note that these settings affect background images.
See also:
*http://kb.mozillazine.org/Website_colors_are_wrong
There are extensions like Adblock Plus (Firefox/Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images and other content.
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*http://kb.mozillazine.org/Websites_look_wrong

Technical System not appearing while creating Business System

Hi
We had already created business system and assigned a technical system and all the interfaces was working fine.
Now we removed the technical system and created a new technical system, since we need to point to different server.
I created a new technical system, oped the old business system and in integration tab, when i click on change technical system.
The newly created technical system is not appearing.
Thought of assigning the business system directly in technical system, but it is not allowing and i am getting message business system is already assigned.
Can you pls help
Regards
Madhan D

Hi Madhan,
When you create a Business System, it will ask for the type of Technical system like Web AS ABAP, Web AS Java etc.
So, the new TS type should match the TS type you selected for your BS so that you can see your TS in the dropdown, when you click on "Change" link.
HTH,
GP

Field label not appearing in OIM Report Page

Hi,
Though this sounds like a silly problem, but I am not able to figure out what could be the problem.
I have created a new report in OIM and it is working perfectly fine as per the stored procedure. The only problem is that one of the label name is not appearing correctly in the report page display. It consists of the following fields:
1. First Name
2. Last Name
3. User iD
4. Custom field of the target application resource -say- abc.
In the xlWebAdmin.properties file, I added a new property for the custom field -
report.CustomReport.label.CustomField=abc
The same value has been written in the XML metadata of the report.
However, in the report page in OIM the label appears as - ???en_US.report.CustomReport.label.CustomField???
Please advice.
Regards.

Actually, we are getting a few errors while running the script and hence I was looking for any alternate, if possible.
java.io.IOException: java.io.IOException: /app/oracle/product/APP/10.1.3/j2ee/home/jsp/bin/ojspc: not found
at java.lang.UNIXProcess.<init>(UNIXProcess.java:148)
at java.lang.ProcessImpl.start(ProcessImpl.java:65)
at java.lang.ProcessBuilder.start(ProcessBuilder.java:451)
at java.lang.Runtime.exec(Runtime.java:591)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
It is unable to locate "ojspc" path. I am not sure as to where this path is referenced. I have to change it there, so that it refers to thecorrect one.
Regards.

Firefox does not correctly print - creates empty pages and cuts of content when printing

When trying to print out pages Firefox first prints a lot of empty pages, and then only a part of the content. Example:
https://online.medunigraz.at/mug_online/wbTvw_List.lehrveranstaltung?pStpSpNr=182778
When entering "print prview" you can see empty pages.
When printing this page with Internet Explorer all is fine.

Thanks for this hint, but it does not help.
This problem does not appear in Internet Explorer, and it should be reproduceable. At least I thought so, so it would help if others could try to click on the link and try to print. They should have the same troubles.
https://online.medunigraz.at/mug_online/wbTvw_List.lehrveranstaltung?pStpSpNr=182778
I also attach a Screenshot so that you can see how the Print Preview looks like.
Kind regards,
Herwig

Clicking "page from template" does not allow me create new pages

I stared designing a site with the trial version of CS4. Of course it involved a lot of trial and error, creating a page and canceling it again etc. At last I was able to design the index page and a few other pages, but suddenly just about 7 days into the trial period, the template started looking different; not displaying the images and displaying the home page article in an improper way. I also discovered that I could not create new pages by selecting file\new. When the new document dialogue page opens and I select "page from template" and then select a site I am working on, nothing shows in the items list. I only see the message "no items". Moreover, the "create" (new page) button is no more a click-able area.
I even tried it by proceeding as if I wanted to design a new site. I click file\new\page from template\the site, but when it comes to the stage where I should select "2 column liquid, left sidebar, header and footer" after clicking “page from template” I don't see anything in the items column. It only tells me "no item."
I thought this problem was due to the fact that I was using the trial version and that the trial version was limited in the number of new pages I could create. So I bought the full version. Alas! I discovered that changed nothing. Right now am stuck. Do you have any suggestion?

I think you're are confusing DW Templates with CSS Page Designs and Starter Pages.
Templates are a DW proprietary device. They permit you to have sitewide elements such as common menus, headers and footers on all your pages along with Editable Regions for page specific content (i.e. the stuff that changes on every page).
DW Templates looks like this (notice the Template Editable Comments):
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />

<title>Untitled Document</title>



</head>
<body>
My Page Specific Content Goes here

</body>
</html>
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

Will iCloud upload all documents (not just those created in pages?) on my hard drive?

Do we have the option of uploading other documents not created by Pages, for example. Documents created by TextEdit, PDF files, Word, etc.?

No. iCloud does not provide general file storage in the manner of MobileMe's iDisk: in this regard its space is only for direct access by compliant programs, currently only iWork.
There are many online alternatives: this page examines some options -
http://rfwilmut.net/migrate3

ASBN creation in iSupplier - PO details not appearing on Create ASBN page

Similar Messages

Maybe you are looking for