ASCCI code or Hexa? How do I type them?

Hello
Sorry to be so dumb but as I want to create a local network between two computers the aid says I must give as security a code with 5 caracter ASCII or 10 hexa.
There : (sorry in french)
Tapez un mot de passe d’exactement 5 caractères ASCII ou de 10 chiffres hexadécimaux si vous choisissez « WEP 40 bits (meilleure compatibilité) » dans le menu local Sécurité.
I have a table of correspondance but how I enter thoses caracters. Do I have to type then as ASCII or normal?
Should I type GHI or 717273 in ASCCI or 474849 in Hexa?
Or maybe I use the Unicode Hex keyboard?
Sorry to ask so simple a question. And thanks for your answers
Cathy

The idea password would be exactly 5 characters.
The reason for this is that WEP rules for turning a password into a WiFi key are different for Apple products vs Windows (and all ohter non-Apple) products. But it turns out that if you have exactly 5 characters in your password BOTH algorithms generate the same WiFi key.
That means if you mix Apple and non-Apple WiFi devices, an exactly 5 character password will work on ALL WiFi devices.
Mac OS X -> System Preferences -> Sharing -> Internet Sharing ONLY Uses WEP security. If you are using 40-bit WEP, then the password should be exactly 5 characters. If you are using 128-bit WEP, then you want exactly 13 characters. No more. No less. If you do this, you password will work for all WiFi devices.
If you are using a WiFi router to setup your network (hightly advised) then you have the option of using the better WPA or WPA2 WiFi security, which has consistant password to key conversions rules across all WiFi devices (Apple included).

Similar Messages

My labtop keeps showing error codes 0601 and 03f0. What does these codes mean and how do I fix them?

HP Pavilion, Windows vista

Usually means the hard drive has failed, replace the hard drive and use the HP recovery discs to install windows.

I've lost my access code for my device and the type of device is the iPad Mini

I lost my access code from may device and the type of device is the ipad mini

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

How to get type any table in function module... or something

Moderator message: Please use a more informative subject in future, and NOT IN ALL CAPITALS.
Hi experts,
how to get type any table option.
in source code.
*" CHANGING
*" REFERENCE(S_EKORG) TYPE ANY TABLE OPTIONAL
Thank you.
Edited by: Matt on Feb 17, 2009 2:27 PM - subject edited

In Function module...... Under changing tab, give the parameter name and type enter associated type any.... You would get that same in the source code and also choose Optional check box.....
You will see exact code in the FM source code

How many Delta types are availabvle in Lo Extraction

How many Delta types are available in Lo Extraction
please tell me i am facing in every interview.
Thanks in advance,
Ashok V

hi
now three types of update methods are available in Lo extraction
A.Direct Delta:- In case of Direct delta LUWs are directly posted to Delta Queue (RSA7) and we extract the LUWs from Delta Queue to SAP BW by running Delta Loads. If we use Direct Delta it degrades the OLTP system performance because when LUWs are directly posted to Delta Queue (RSA7) the application is kept waiting until all the enhancement code is executed.
B.Queued Delta: - In case of Queued Delta LUWs are posted to Extractor queue (LBWQ), by scheduling the V3 job we move the documents from Extractor queue (LBWQ) to Delta Queue (RSA7) and we extract the LUWs from Delta Queue to SAP BW by running Delta Loads. Queued Delta is recommended by SAP it maintain the Extractor Log which us to handle the LUWs, which are missed.
D.Un serialized V3 Update: - In case of Un serialized V3 update LUWs are posted to Update Queue ( SM13 ), by scheduling the V3 job which move the documents from Extractor queue ( LBWQ ) to Delta Queue ( RSA7 ) and we extract the LUWs from Delta Queue to SAP BW by running Delta Loads. Since the LUWs are not moved in a Serial fashion from Update queue to Delta queue if we have any error document it considers the subsequent documents and no sorting of documents based on the creation time. It improves the OLTP system performance as it forms a segment for one language.
hope this will solve your problem
nagarjuna

How to use type cast change string to number(dbl)?can it work?

how to use type cast change string to number(dbl)?can it work?

Do you want to Type Cast (function in the Advanced >> Data Manipulation palette) or Convert (functions in the String >> String/Number Conversion palette)?
2 simple examples:
"1" cast as I8 = 49 or 31 hex.
"1" converted to decimal = 1.
"20" cast as I16 = 12848 or 3230 hex.
"20" converted to decimal = 20.
Note that type casting a string to an integer results in a byte by byte conversion to the ASCII values.
32 hex is an ASCII "2" and 30 hex is an ASCII "0" so "20" cast as I16 becomes 3230 hex.
When type casting a string to a double, the string must conform the the IEEE 32 bit floating point representation, which is typically not easy to enter from the keyboard.
See tha attached LabView 6.1 example.
Attachments:
TypeCastAndConvert.vi ‏34 KB

How comples return types and parameters are mapped

Hi all!
I want to know how complex return types and parameters in a java interface gets mapped to wsdl? for example how would the wsdl for the following interface shall look like:
interface ComplexReturns{
   java.util.Date getLuckyDate(java.util.Date DoB);
   myPack.MyClass getMyClass();
}

Hi,
- In your application module, make a public method that returns an arry, for example an arry of strings[]
    public String[] returnTwoVals(){
        String[] returnvals = {"1","2"};
        return returnvals;
    }- expose this method in the application module
- in the user interface drag/drop the returnTwoVals method on a page and choose to create a button.
- double click the button to generate the binding code
    public String commandButton_action() {
        BindingContainer bindings = getBindings();
        OperationBinding operationBinding =
            bindings.getOperationBinding("returnTwoVals");
        Object result = operationBinding.execute();
        if (!operationBinding.getErrors().isEmpty()) {
            return null;
        return null;
    }- you can access the values in the arry by adding this code after the Object result =...
   String[] vals = (String[])result;
   System.out.println(vals[0] + " - " + vals[1]);

WOOT! I found a way to show you how to get type lag!

I never gave you my 60k line file because it is a whole lot of source code I didn't want to share. No offense, I just want to pay off student loans.
Now I realized you can get type lag just by making jibberish code too. So here is 150klines of copy/pasted data, and it shows you how to get type lag.
Download:
http://www.goodnewsjim.com/d/ZZX_Condensed_Function.as
Then start randomly editing the file. My suggestion is to maybe make i++ to i+
On my end, I get 1.5 sec type lag. Let me know if get it too.

I'm so excited to have something for you guys at Adobe.
It has been over half a year since I first reported the typelag bug, and one of your guys requested code.
Let me know if you can replicate the problem in this post because it will get me excited that a fix might happen in a patch.

Ive deleted contacts from my contacts list but they still pop up when i go to text and type in the name of a current contact. . How can i delete them off my phones memory for good?

Ive deleted contacts from my contacts list but they still pop up when i go to text and type in the name of a current contact. . How can i delete them off my phones memory for good? iPhone 4S

At the present time, the only way to clear that is to restore the phone as new. Perhaps a future iOS update will give us the option to clear that cache.

I have a problem while typing in my MacBook pro. it is showing different characters when i type. for example: qw`e§r]t[y= this is how when we type "qwerty|" can anyone help me pls?

I have a problem while typing in my MacBook pro. it is showing different characters when i type. for example: qw`e§r]t[y= this is how when we type "qwerty|" can anyone help me pls?

You could just try changing your Input Sources under System Preferences>Language & Text:
But I kind of doubt that's going to work. It may be a hardware problem or a system problem. If you take it into Apple they might be able to determine which and might advise a reinstallation of System software. I would take it to an Apple Store or an AASP but, first, make sure that you have a backup just in case they suggest a clean install of the system.
Good luck,
Clinton

Pl sql Code To count how max checkboxes are checked In the Report Region

I am developing a APEX report where I put check boxes to row row of the report result . So I checked Some of this check box. Now I need a code to count how many checkboxes are checked during the runtime

there is a forum for APEX: Oracle Application Express (APEX)

How do I type Hebrew and English on the same page

How do I type Hebrew and English on the same page in Indesign?

What version of InDesign are you using? And on what operating system? Switching keyboard ("input methods") is in your OS, not in InDesign. InDesign has had the capability to display right-to-left languages since CS4, but only the Middle East edition has the abilities to actually manipulate Hebrew text. If you're trying to do a bilingual, bidirectional document, you'll need the ME edition. If you are a CC subscriber, it comes with your subscription; if you are not, you'll need to buy another version of ID, or a plugin that will allow you to access those RTL features.

I am trying to burn a dvd on my mac book pro but it comes up with an error code 0x80020022. How do I fix it? Thanks

I am trying to burn a dvd on my mac book pro but it comes up with an error code 0x80020022. How do I fix it? I have tried rebooting through PRAM and various other options that I found online, but nothing has helped.
Thanks

Try using a different brand of DVD's.

How can I type "š" with english keyboard layout?

I was wondering if somewho can tell me, how I can type "š" with englis keyboard layout, because when I have restart iMac, layout was changed back to english (from Slovak) and now I cant start Mac OS X, cause in my login is "š"

Start with the Apple menu in the upper left of the Menu Bar and select System Preferences. On the System Preferences pane on the top row is the UN flag icon. For Tiger (OS-X 10.4) it was called "International". Click to take you to the Language Options:
The sub-menu called "Input Sources" (as you can see from the above screen shot) will take you to the panel that I referred to in the previous response. If you don't find your language listed then click on the "Edit List at the bottom left of the "Language" sub-menu. Once you make a change in either one of these places you will be given a notice to tell you that the change will be reflected the next time you restart your Mac or the next time that you log in to your account. If you are the only user and do not have another account on your Mac then the restart option will be your method. There is no need to do this procedure from the install DVD.

I have never set up a passcode but when I try to reset my phone it is asking for a passcode. Is there a generic code? Or how do I retrieve an existing/forgotten passcode?

I have never set up a passcode on my iphone 4S but when I try to reset my phone it is asking for a 4 digit passcode. Is there a generic code? Or how do I retrieve an existing/forgotten passcode?

You will need to put your phone in recovery mode and then restore using iTunes.
See here:
http://support.apple.com/kb/HT1808
Note: All user content will be erased.

ASCCI code or Hexa? How do I type them?

Similar Messages

Maybe you are looking for