ASCII High Level Specail characters issue in APEX!!

Hi All,
We have created text area in APEX where users can enter content manually or copy the content and paste data.
The key word characters are wroking fine, but other than this is not accepting and it is concverting as reverse down question mark.
We had analyzed all the ways and found that Character set is not supporting to accept these characters. But DBA team is not sure to replace this character set in backend.
With out changining the back end character set how we can achieve this.
For reference i had place the content used by our team which is converting reverse question mark.
Key issues: This meeting was set up to discuss Shell’s policy on armed guards on ships, which has become a challenge in spot trading recent when ships have been nominated to Shell that already have armed guards on board. We wanted to better understand Shell’s policy itself, and discuss an issue with an existing trade with Vitol – as well as possible implications+
and we have tried to insert the above synatx in a temp table as
INSERT INTO TEMP_ENG_NOTES(CLOB_ENG_NOTES)
VALUES('Key issues: This meeting was set up to discuss Shell’s policy on armed guards on ships, which has become a challenge in spot trading recent when ships have been nominated to Shell that already have armed guards on board. We wanted to better understand Shell’s policy itself, and discuss an issue with an existing trade with Vitol – as well as possible implications for its participation in the .')
Here are the characetrs which is causing the problem.
Symbol
Thanks,
Anoo..
Edited by: Anoo on Aug 28, 2012 4:55 AM
Edited by: Anoo on Aug 28, 2012 4:56 AM

>
After 854 posts still no APEX version, no DB version, no webserver info, no browser/version...?
>
We have created text area in APEX where users can enter content manually or copy the content and paste data.
The key word characters are wroking fine, but other than this is not accepting and it is concverting as reverse down question mark.
We had analyzed all the ways and found that Character set is not supporting to accept these characters. But DBA team is not sure to replace this character set in backend.Why not? What do you pay DBAs for?
What character set?
With out changining the back end character set how we can achieve this.
For reference i had place the content used by our team which is converting reverse question mark.
Key issues: This meeting was set up to discuss Shell’s policy on armed guards on ships, which has become a challenge in spot trading recent when ships have been nominated to Shell that already have armed guards on board. We wanted to better understand Shell’s policy itself, and discuss an issue with an existing trade with Vitol – as well as possible implications for its participation in the MOC process in general.That looks a lot like sensitive information that shouldn't be posted here...
and we have tried to insert the above synatx in a temp table as
INSERT INTO TEMP_ENG_NOTES(CLOB_ENG_NOTES)
VALUES('Key issues: This meeting was set up to discuss Shell’s policy on armed guards on ships, which has become a challenge in spot trading recent when ships have been nominated to Shell that already have armed guards on board. We wanted to better understand Shell’s policy itself, and discuss an issue with an existing trade with Vitol – as well as possible implications for its participation in the MOC process in general.')
Here are the characetrs which is causing the problem.
Symbol
Need further information regarding the character sets before suggesting anything.

Similar Messages

HDMI Audio not working on Q190 (along with all higher level Audio Formats)

Help, I have been given the run around via support, I cannot get the HDMI audio to work with my Pioneer Surround Sound, only the Intel display audio shows in control panel (Win 8 X64) and the RealteK S/P Dif port and it is not capable of supporting 7.1 sound or bitstreaming or DTS, Dolby HD, Etc. Tec support appears not capable of fixing the issue and wanted to send me to software support and pay. I have only had the machine for 4 days and it has never supported higher level sound.
Every other device I have (had or currently) connected to the receiver works just fine. I have to figure this out or return the machine, the audio is the most important aspect for me. Besides when you advertise 7.1 support the machine you sell should be able to do it.

Hey guys,
I have had this Q190 with the Celeron CPU since last week and I am using XBMC Frodo and the HDMI is connected to my AVR Onkyo TX-NR809 and from the Onkyo to the TV. And the sound is 7.1 with PLIIZ. It works fine. I think it may be some driver problem because Realtek Audio which is in the Q190 works fine with the Win8 preinstalled. Realtek is kind of bad with driver because I lost my wifi after upgrading to Win 8.1. After a few days with no wifi, I found out that the driver was bad, yes it was a Realtek wifi driver but posted by Lenovo for W 8.1.
I have another friend who also just bought the Q190 and he reported no audio problem so I think it is just a matter of trouble shooting the drive and configuration. I do love the form factor of the Q190.

Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of '

When I deploy the cube which is sitting on my PC (local) the following 4 errors come up:
Error 1 The datasource , 'AdventureWorksDW', contains an ImpersonationMode that that is not supported for processing operations.  0 0
Error 2 Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of 'Adventure Works DW', Name of 'AdventureWorksDW'.  0 0
Error 3 Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Customer', Name of 'Customer' was being processed.  0 0
Error 4 Errors in the OLAP storage engine: An error occurred while the 'Customer Alternate Key' attribute of the 'Customer' dimension from the 'Analysis Services Tutorial' database was being processed.  0 0

Sorry hit the wrong button there. That is not entire solution and setting it to default would work when using a single box and not in a distributed application solution. If you are creating the analysis database manually or using the wizard then you can
set the impersonation to your heart content as long as the right permission has been set on the analysis server.
In my case I was using MS Project Server 2010 to create the database in the OLAP configuration section. The situation is that the underlying build script has been configured to use the default setting which is the SQL Service account and this account does
not have permission in Project Server I believe.
Changing the account to match the Project service account allowed for a successful build \ creation of the database. My verdict is that this is a bug in Project Server because it needs to include the option to choose impersonation when creating the Database
this way it will not use the default which led to my error in the first place. I do not think there is a one fix for all in relations to this problem it is an environment by environment issue and should be resolved as such. But the idea around fixing it is
if you are using the SQL Analysis server service account as the account creating the database and cubes then default or service account is fine. If you are using a custom account then set that custom account in the impersonation details after you have granted
it SQL analysis administrator role. You can remove that role after the DB is created and harden it by creating a role with administrative permissions.
Hope this helps.

Service item not relevant for pricing if used with higher level item catego

Hi,
We have a service item e.g S900 with Item category ZTAD.
This line Item automatically creates a Service Order.
Requirement is , if this service item is used with an Equipement Item,
Item 10 --> Equipment
Item 20 --> Service
--> There would be price required for the Equipment ( Condition type ZPRO - Mandatory )
--> System should not ask for the price of Service Item, as it would be inclusive in the Equipmetn charges.
--> In short if the Service item is used as Sub item with Equipment, it is not relevan for pricing.
I tried copying ZTAD and creating a new item cateogry which is not relevant for pricing...would that be the correct approach, but facing several issues related to Automatic Service order generation.
what could be possible ways to achieve above.
Regards
Trupti Deulkar

Hi,
System will ask the price for item category TAD bcoz service also chargble,in your case insted of TAD use TANN as free,
You can define based on your higher level item category for Ex : OR + Normusage(Blank)Higherlevl item (Blank)= TAN
you can config like this ORNormUsge(Blank) + TAN = TANN
like this you can do it this correct way or els you can manually enter the item catagory (TANN) at sale order line item level.
Thanks
Vinayak.
Edited by: vinayak4all on Jul 12, 2011 2:45 PM

Higher level/consolidation numbers not shown in Excel

Can not see consolidation numbers at higher level in Excel sheet. They are showing MISSING.
But data for the certain member combinations are for sure loaded and existing in the cube because we can see them from Excel.
Any idea about this issue?

You need to calculate the data if your cue is BSO. So you need to execute the calculation.

HU03 going to short dump for handling unit which has higher level handling

Hi,
I am ABAPer, i working on issue, HU03 is gong to short dump. i dubug the t code and find out that particular handling unit has higher level handling unit. I checked another handling unit which won't had higher level handling unit, that time it's not giving dump.
Note: in HU03 T CODE, function module V51P_HU_CONTENS is fetching values. when ever handling unit has higher level handling unit, it's not fetching further values.
venkey

Hi,
Goto NACE transaction code , there you select the application area then it will give you the list of output types then select specific output click processing routines then you will see the program name and script used.
Or esle goto SPRO tcode then you can find the functional tab there also you can get the details.
Thanks,
Aditya

Cumulation of lower level item prices to higher level items

Hi,
We have a specific requirement that we use high-level materials that is not relevant for pricing and lower level items connected to higher-level item that are RA and billing relevant. How do we modify the pricing procedure to cumulate (roll-up) the lower level items to higher level item which is not price relevant but statistical value should be updated at this level for billing purpose.
We want to achieve this using/modifying only pricing procedure and not via user exit..
Request SAP experts to provide some inputs to this issue..
BR/Rajasekhar

Hi rajsekhar
But generally if you want to transfer the cost of the sub item to main item then you can check the box Cumulative cost in copy control VTFL . But your requirement is quite opposite .So you need to go to assign a New Reqt / Alt calc type to the cond type , telling that the header item cost which is not relevant for pricing has to be transferred to sub item .So you need to integrate with the ABAP'er to give inputs to him and giving our requirement also
Regards
Srinath

My contacts and whats app messages are shown on my sister's iphone! How can I secure my iphone and have a high level of security and privacy! Her Contacts are shown in my iphone as well!!

I have and iphone 6 with iOS 8.1. My contacts and whats app messages are shown on my sister's iphone! She have iPhone 6 and and iOS as well. How can I secure my iphone and have a high level of security and privacy! Her Contacts are shown in my iphone as well! Setting in mac and iphone are a bit presice and sensitive. Is there any way to solve my issue and increase the safety, security and privacy in my iPhone and its data?

Your problem is that she used your icloud ID to connect to icloud and thus had all your data synced to her device. Contacts are not saved in a backup to icloud, since they are stored independently in the Contacts section of icloud. If someone deletes them, they are gone. If you had them on the PC would they be available in some backup you frequently make of the PC?

Multiple hierarchies with a shared higher level in OBIEE

Hello all,
I'm trying to create multiple hierarchies for a shared dimension in OBIEE. I have gotten these to work in the past when each hierarchy for the dimension all shares the common “grand total” level at the top, but I now I'd like multiple hierarchies that share a common higher level that isn't the grand total level.
Here's what I'm trying to do with a Customer Geography hierarchy. I want to give the user the option to drill from the customer "Country" and go either into "Cities" or "States":
Grand Total level
--->Country level
------> State level
---------> Customer detail level
------> City level
---------> Customer detail level
So "Country" is the common parent of "State" and "City", and "State" and "City" each have" Customer detail" as the lowest level. The Admin Tool let's me build exactly this in my RPD (with no errors/warnings), but when I go to drill on Country in an Answers report, I don't get the option to navigate down to State or City; it just automatically drills into the underlying states -- never shows cities.
I guess I was hoping there'd be a pop up option to ask the user which path I wanted to drill down on (kind of like what shows up for multiple navigation targets in an Answers request).
Am I missing a setup step in my RPD for this multiple hierarchy? Is a shared higher level multiple hierarchy even possible in OBIEE?
Thanks,
Jeremy
Edited by: OBI Wan on Mar 19, 2009 3:29 PM
Edited by: OBI Wan on Mar 19, 2009 3:30 PM
Edited by: OBI Wan on Mar 19, 2009 11:20 PM

Thanks mma for the help. I thought I saw in your reply this link as well to RittmanMead, but it's not showing up now?
http://www.rittmanmead.com/files/Advanced%20Development%20using%20OBIEE%20(ODTUG%202008).pdf
Anyway, on slide 37 of Rittman's presentation, that screen shot he has of Country, City, and State is exactly what I am attempting to do. I was hoping my issue would be a bit more straightforward than the recommended ragged hierarchy work arounds, but I may still have to do something like that in the end.
This issue just seems more simple than ragged hierarchies, because I start from the same level and end up back at the exact same level (instead of different destination levels as can be the case in ragged hierarchies). I don't know -- maybe my example is ragged as well.
If Rittman got that hierarchy in his screen shot on slide 37 to work like I'm trying to, then that would be perfect. :)

High Level Bin Search, before Storage Type Search

Hi,
Can anyone help me to guide, which user Exit/Badi, be used for searching Empty bins, before storage type search. I come to know from one of colleague below message.
"" if you want to check the quantities on a higher level (before storage type search ), you can use the user exit "+++".""
I am unable to understand which kind of user exit "+++".
Background: Want to do putaway with storage type 007: Our high rack is having space (Bins) with different capacity. One rack can have 4 type of racks.
We want to putaway material with different bin types in one storage type.
Regards,
Mainsh Gupta

Hi Vijay,
Thanks for your quick reply. I am trying user exit given by you. Once again I would like to submit my requirements here.
a) We have 98 racks in Warehouse.
b) Product is Ball Bearing.
c) Bearings are handeled in Ea, Issue and Stock unit is Ea
d) Alternate Unit of Measure is Box, i.e. per box quantity is mentioned into Material Master.
e) Each Rack is having 5 different type of bins.
f) We want to fill rack from bottom to top for first rack, and then next rack.
g) Once we do putaway for any material, each time system should pick Next empty bin, and each bin type is different.
Case 1) If going with Storage Type 007:
                i) Need to maintain palletization data in Material master WM view 2.
               ii) Can not maintain any capacity check for Capacity utilization in Material Master. Capacity is only Pallatization data.
              iii) While creating TO, System goes for placemet of material from bottom to Top in Rack, but give similar quantity for each bin, & these quantities are defined from Material Master from Palletization data.
              iv) In this case it is not checking bin capacity.
My query:
i) How can we split quantity during TO Creation based on Next Empty Bin avaialbe with certain capacity and all further bins with other capacity.
ii) Can we have different type of bins in one storage type if we are going for Storage type 007. or it is mandatory to have similar kind of bins.
Case 2) If going for Storage type 002:
              i) Not maintined Palletiztaion data in Material master.
             ii) Maintining capacity check in WM View 1.
            iii) Maintained Capacity check in Bin master.
            iv) WHile careting TO , system doesnot spilt quantity for next empty bins avaialbe, Only one line item comes for whole quantities. and system throw an error.
Message Number: Message no. L3068
Message Details: Maximum quantity for storage bin TR-15 will be exceeded by 740.000 PC
My query: How can we split TO quantity as per next empty bins available.
If you will give me your contact number, I can speak to you over phone and eleborate in more details for your clear understanding my issue.
Regards,
Manish

High-Level JTS/TopLink design question

I've gone through the "using JTS with TopLink" docs, and it mostly makes sense. However, I still don't understand how TopLink "knows" when I call acquireUnitOfWork() whether or not I'm participating in a distributed 2PC transaction.
Said another way:
Let's say I've got an application based on TopLink (registering appropriate JTS stuff) that exposes an API that can be accessed remotely (RMI, SOAP, whatever).
And, I've got another, separate application using a different persistence-layer technology (also supporting JTS) that also has an API.
Now, I create a business method that uses the APIs from both of these applications, and I want them to participate in a single, distributed transaction.
At a high level (source code is unnecessary), how does that work?
Would the API need to support an ability to specifiy a TransactionContext or is this all handled behind the scenes by the 2 systems registering with the Transaction Service?
If this is all handled through registration, how do these 2 systems know that these specific calls are all part of the same XA transaction?

Nate,
TopLink particiaptes in JTA/JTS transactions but dows not control them. When you configure TopLink to use the JTA/JTS services of the host application server you are deferring TX control to the J2EE container. TopLink will in this case register each acquired UnitOfWork in the current active TX from the container. The container will also ensure that the JDBC connection provided to TopLink is also bound by the active TX.
In order to get 2PC you must register multiple resources into the same JTA TX. The TX processing during commit will then make the appropriate call backs to the underlying data source as well as the necessary call backs to listeners suchs as TopLink to have its SQL issued against the database.
In short: The J2EE container manages the 2PC TX and TopLink is just a participant.
Doug Clarke

High Level Complaints contact number?

Hi
I've got an issue that is turning into Groundhog Day which is covered in a different thread (service getting provisioned and that BT cancelling the order shortly afterwards, this is happened three times in two months now). I'm not getting any response on trying to escalate, so in effect BT's complaints procedure isn't getting followed making it impossible to get a deadlock letter allowing me to go to arbitration.
Does anyone have a current contact number for BT's High Level Complaints department? Not too interested in a postal address, BT are a telecommunications company after all and if the only way of contacting them is mail.....
Thanks in advance.
Jimmy

Hi Jimmy,
I've checked our email queue and we still don't have one for the address registered in your profile. I'll drop you a PM and we can take it from there.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

APO DP: Disaggregation to product&plant level from higher levels.

Hi.
We do demand planning on groups of products and for country/region in general, we have around 48.000 CVC's in our current setup. It works very well.
A new situation has arisen where we need to have the forecast split down to product and plant level.
As is we simply don't have the information at this level of granularity.
I don't see how we can add for instance product to our setup, we have around 20.000 products so the number of CVC's in DP would become massive if we did this.
I was thinking that perhaps something could be done by exporting the relevant key figures to a new DP setup with fewer characteristics (to keep the number of CVC's down) via some infocubes, perhaps some disaggregation could be done via some tables and the BW update rules. This still leaves the issue of how to get the figures properly disaggregated to plant and product though.
Does anyone have experiences on how to get the figures split to lower levels from DP when you're planning on a higher level?

Simon,
One approach as you mentioned can be creating Z Table where in you set up disaggregation proportion from product group level to product level or product location level.
Product Group X 100 Product A@loc1 10
Product B@loc1 90
Download your planning area data into infocube C and then use BW routines to convert the data from group in infocube C to lower level refereing Z Table....into another infocube..
SAP also provides such standard functionality of spliting the aggregate Demand plan to detailed level
SNP plan..through functionality like location slit or product split.
Essential you will be using same concept in yor BW solution or you may also want to consider the
release your DP to SNP planning area its as solution of diaggregation of data to lower level.
Regards,
Manish

Volume higher level in Vista than OSX?

Hi everyone, this isn't a major issue but I'm really wondering why does my integrated speakers goes to an much higher level with windows vista than with OSX??? It's the same hardware and so should have the same sound level on both os... and it's not a slight difference for example to get the same level of sound that 1 bar gives me in Vista(I'm referring to the volume pop-up Icon from Apple) it takes me about 3-4 in OSX... Did anyone notice that too?
And if I'm not alone could Apple explain this situation 'cause I'd love to have the same level of sound in both OS.

resetting the pram can sometimes restore the volume of your mac to its default settings.
see Resetting your Mac's PRAM and NVRAM

The software to be installed requires Administrator or higher level access

I am installing a new epson print driver on a G4 Quicksilver tower 10.4.11. When I try to install it, I get this message. "The software to be installed requires Administrator or higher level access privileges." I am stumped how to correct that issue.

As far as the Printer...
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
Might try Printer Setup Repair 5.1...
http://www.fixamac.net/software/index.html

ASCII High Level Specail characters issue in APEX!!

Similar Messages

Maybe you are looking for