Asha 300 - Email Notification

I have an Asha 300 on O2.
It has 2 email accounts set on it, gmail and btinternet, both of which are sending and receiving.
Settings are for new email notifications to be received between 0700-2200hrs.
How do these notifications appear ?
Do i need to set the home page to show anything such as notifications or mail ?
I am not getting any notifications at all.
Thank you
Mat

Spent an hour at the O2 store today.
Give the staff their due, they did everything they could think of.
That said it was only things that i have previously done.
In summary
Emails from my two accounts are being pushed to the email facility on the phone, without delay.
Despite all the settings being put in place for new email notification on the home screen, it isn't happening.
This is clearly an issue with the firmware of the phone.
Worryingly, this is known and NOKIA "seem" to be doing nothing, not even acknowledgeing the fact.
As the user manual clearly states that this is a facility, are NOKIA in breach of contract ?
The sale of goods act clearly points in that direction, but the contract is with the phone provider ie the O2 shop.
I had my NOKIA 6230i for a hassle free 7 years ................ wishing i had not changed, as this was the only facility i really wanted in the new phone.
Can i also say thanks to those who replied to this post, and the private messages i sent.
Mat

Similar Messages

  • Asha 305 email notification and Facebook app issue...

    Sir
    In nokia asha 305
    email app is not get email notification automatically.
    Facebook app does not allow to upload photo,vedio.
    It does not allow to trun off chat, Change pasward,etc settings
    .mp4 vedio not supported.
    Moderator's note: We have amended the title of this post as this was moved from another thread.

    Bro! Every asha mobile user face this problems! Lets hope some changes in next update!

  • ICal keeps sending email notifications from all agenda items from the last 2 years. After laptop start up this action is repeated every hour. How can I stop these 300 emails coming in every hour?

    iCal keeps sending email notifications of all agenda items from the last 2 years (then I bought my laptop). After laptop start up this action is repeated every hour. How can I stop these >300 emails coming in every hour?

    Hi,
    We have rolled out a fix for this issue.
    Please log off and log back in to your machine and the issue should be resolved automatically. In case that does not work, please manually run the msi installer posted here (may require reboot).
    For details, please refer to the KB article here: Multiple RunOnce keys created 11.0.10 and 10.1.13 Acrobat | Reader
    Please let us know if you still face any issues.
    Thanks,
    Ashu Mittal

  • One Email Notification to Rule All Emails

    Coming from a OG Moto Droid to Bionic so everything has been pretty thumbs up with this new phone.  I did notice what seems to be an oversite from the designers/coders.  If you sync a exchange email account and a POP email (like I do) or probably any two email accounts (except Gmail), all email (again except Gmail) gets assigned the same email notification ringtone.  This is pretty annoying on a phone that was delayed to market, and cost me $300.  Hopefully this is just an oversite by someone but I wanted to make sure I pointed this out in an official forum so that it can be fixed in future updates. 
    Of course if anyone has a solution I'm all ears...would love to hear two different ringtone notifications for my two different email accounts.  Right now they are all getting the "WORK EMAIL!" alert.  I just confirmed that this is an issue at the store, my OG Moto did this very easily but for some reason (while I get two different icons notifications in the status bar) the ringtone alert has been combined for all non Gmail accounts. 
    Thank you for any help you can provide. 

    MarquiaF_VZW wrote:
    BionicDroider, thanks for posting and congrats on your new device! I understand why you would want to have separate email notifications for your work and personal email accounts. This is not something that was just overlooked or a design flaw for the Bionic. This is how Android is designed. Any emails in the default email application will have the same notification sound. You can try 3rd party mail applications from the Market for other options. 
    This is not the way Android is designed, my ORIGINAL DROID could perform this simple (but important) function and is a total step backward.  My 4G Dual Processor Machine to Rule All Machines can't tell the difference between my email accounts?  This a totally BOGUS response and very disapointing.  This machine can do better and I expect this to be fixed.  
    Thanks to the other forum members for suggesting apps to fix this.  Fortunately this is an open platform so the market can correct this.   

  • ICal keeps sending email notifications of past agenda items

    iCal keeps sending email notifications of all agenda items from the last 2 years (then I bought my laptop). After laptop start up this action is repeated every hour. How can I stop these >300 emails coming in every hour? Am not using iCloud & not sharing my calendar with others. Thanks for any help!

    iCal keeps sending email notifications of all agenda items from the last 2 years (then I bought my laptop). After laptop start up this action is repeated every hour. How can I stop these >300 emails coming in every hour? Am not using iCloud & not sharing my calendar with others. Thanks for any help!

  • Email notification issue on E90

    Hi,
    I am using mail for exchange(version 2.9.158) on E90 (software version 300.34.84) and I use the default email notification (under settings --> General --> personalisation --> standby mode --> Active standby plugins). This show the count of unread mail in the screen. When I change my connection type in mail for exchange (I generally switch between my service provider and my WiFi connection), the default email notification disappears. I have to manually go back and enable the plugin.
    Has anybody faced this problem? Is this an issue with the software? Is there a way to fix this? Thanx

    Hi Andrew,
    We haven’t had any issues since we started using Forms Central until after your site was down for maintenance a couple days ago.  That’s when the issue started for us.  I’m thinking a glitch on your end?  I actually called the day the site was down and it was confirmed that the Forms Central was in fact down and to give it 1-2 hours and check back.  The next day is when the email notifications stopped coming into our email address.  If you could check that out and let me know, then we’ll take it to the co-author step if need be.
    Thanks,
    Sue Monforte
    Kenny Mondo Productions

  • Nokia Mail For Exchange on Asha 300 doesn't work w...

    I'm hoping someone from Nokia might see this and get your developers to make a tweak to the Nokia Mail For Exchange app for Asha 300 (a S40 phone).
    The Microsoft Outlook/Office 365 hosted/cloud-based e-mail service uses usernames in the format [email protected]
    Unfortunately the Nokia Mail For Exchange app automatically truncates the Username so as soon as you tap out of the field it becomes just "jane.smith". As a result it fails validation.
    This is probably a one line code change which makes perfect sense for users connecting to other variants of Microsoft Exchange, but for those of us on Microsoft's hosted offering it's stopping us getting in.
    Thanks!

    Bueller? ...Bueller? ...Bueller? Anyone?

  • A workflow is sending the same email notification twice

    A workflow is sending the same email notification twice. Not every notification, but this happening only a few times randomly.  The double sent emails are arriving together , have the same date and time.
    I've checked the workflow and found that there is no double sending command in the workflow, and the workflow history also shows just 1 run and 1 email sending.
    Can somebody help me on this.

    Hi Neel,
    For troubleshooting your issue, you can take steps as below:
    1.Increasing the UserDefinedWorkflowMaximumComplexity to 30000 setting using Powershell script
    2.IISRESET
    3.Adding <httpRuntime maxRequestLength="51200" executionTimeout="3600" /> in web.config. Yes, that is "3600" unlike "300" suggested. Please note that there are multiple lines in web.config with <httpRuntime maxRequestLength="51200">.
    I made this change only in the very first one.
    4.IISRESET
    5.Removed everything from C:\Users\<userName>\AppData\Local\Microsoft\WebsiteCache from my laptop
    6.Removed everything from C:\Users\<userName>\AppData\Roaming\Microsoft\Web Server Extensions\Cache from my laptop
    7.Removed everything from C:\Users\USER\AppData\Roaming\Microsoft\SharePoint Designer\ProxyAssemblyCache\ from my laptop
    8.IISRESET
    9.Restart SharePoint 2013 Designer
    Reference:
    https://social.msdn.microsoft.com/Forums/en-US/69b184bf-09ed-4e00-815a-4e40a975c4bf/prevent-sharepoint-2010-workflow-to-send-duplicate-emails?forum=sharepointcustomization
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Multiple email notification for scheduled web intelligence jobs

    Hi,
    Webi job failed email notification for daily scheduled jobs, email count goes more than 2000.
    Operating System Details:
    Windows 2008 R2
    SAP Business Objects Details:
    SAP BO 4.0 SP6
    Database Details:
    CMS DB Oracle 11.2.1.0
    Issue description:
    On daily basis 100 jobs are scheduled using event file. All 100 jobs start after BW data load completion.
    Below is the process for webi job schedule start.
    1) BW job complete
    2) Event file update on shared location 
    3) Webi job scheduling starts.
    Till april 1st week all 100 jobs were scheduled succesfully  and we recieved 101 notification, 1 extra mail for event file notification. 
    But from last week we recieved more than 2000 mail and on subsequent retry all jobs were scheduled succesfully.
    We check the CUID in query builder, but only data for 16 jobs was available, and in instance manager we got 300 failed instances of 16 jobs, but those jobs were executed successfully after multiple reattempt.
    Below is the error mentioned in instance manger for all 300 instances:
    "Object could not be scheduled within the specified time interval".
    Note : Due to unavailablity of trace log, we cannot enable the trace log in enviornment.
    Thanks,
    Vizit Yadav

    Hi Vijay,
    Thanks for reply.
    I have read the KB#144881- Multiple instances spawned after daylight savings time change.
    Though this issue arrived after daylight saving, i have few more points to describe:
    1. Issue arrives only on Monday, not on every day.
    2. Day light saving was on 29th March, after that at the very first Monday on 30th March issue was not       there, however after that issue arrives every Monday, i.e. 6th & 13th of April.
    Is there any SAP notes for SAP-BO 4.0 SP 6 on this.
    Regards,
    Vizit

  • Automatic Email notification of ST03N data

    Hi everyone,
    Currently, I provide <b>dialog steps data from ST03N</b> to my client on a daily basis using a spreadsheet that I send via email.  I want to somehow <u>automate the data extraction process and the email notification sent to my client</u>.  How can I do this?  What do I need to setup in the system to achieve this? 
    Below are information about the SAP system:
    Component version:    SCM 4.10
    Operating system:     SunOS
    Database system:      ORACLE
    SAP_ABA     640     SAPKA64017
    SAP_BASIS     SAPKB64017
    PI_BASIS     2005_1_640     SAPKIPYJ67
    ST-PI     2005_1_640     SAPKITLQH5
    SAP_BW     350     SAPKW35017
    EA-IPPE     300     SAPKGPIC11
    SCM     410     SAPKY41011
    SCM_BASIS     410     SAPK-41011INSCMBASIS
    BI_CONT     353     SAPKIBIFQ0
    ST-A/PI     01I_SCM410
    Any inputs will be highly appreciated.  Thank you!
    Best regards,
    Kris

    Hi,
    you can setup automated alert monitoring via CCMS, however I doubt there is automatic reporting of excel sheets.
    Please check the link below:
    http://help.sap.com/saphelp_nw70/helpdata/en/ac/825f18c02e454dac8da51f4eb22265/frameset.htm
    Regards,
    Siddhesh

  • I there a problem with email notifications?

    Hi.Since yesterday morning, I am no longer receiving email notifications through my email provider regarding new postings on threads that I've commented on in this forum, although I can still see them under my profile on this website.I haven't edited my preferences or my spam controls but they don't appear in the spam either.Anybody experiencing the same?

    You're telling me! I made the mistake of clicking on "receive email notifications" for every community so ended up with about 300 emails! But of course it was a website problem, not my settings.To top it all, as soon as I deleted all the emails, the Wi-Fi on my W995 decided it had enough and couldn't even find my router in the same room.I've just handed it in for a warranty repair (hopefully) as it's less than 3 months old and no amount of troubleshooting (update service, soft reset, hard reset,update service no 2, phone repair and update service no 3) could fix it.They say it comes in threes....

  • Failure Email Notification

    Original post by William Culley
    8:29am, May 17 
    Hello,
    I am trying to setup an email notification when a task that uses an agent fails, but choosing the Failure Email option for the task does not appear to work.  I've tested the email template on other task events like start and it works.  So I know the email template is correct. 
    I read through the documentation and it states the Failure Email notifies when an external task fails.  Does this mean a task that invokes an agent does not have the option to send a failure notification?
    Thanks,
     Bill
    Ed Contini
    9:34am, May 17 
    Hi Bill,
    The email should fire in the even of failure of an outbound message. Is your failure for an outbound or an inbound message?- Ed
    William Culley 
    10:16am, May 17 
    Hey Ed,
    I believe we've figured this one out.  We had the failure email being set at the task level and not the agent level.  So the agent failure did not equate to a task failure and we were not receiving the failure email.Thanks for you assistance,Bill 
    Anthony Erickson 
    2:51pm, May 18 
    Hi Bill,
    We have a related issue to this which might provide some useful information.  By turning it on at the Agent level, it will also fire when an inbound update fails.  Where you are integrating tickets to external systems, we've found it's possible for updates to be made to an already-closed ticket in the remote system which tries to send an update after the Requisition has already closed.This triggers a failure notification for us, and the 3 failures we experienced were outnumbered by about the 300 false errors we received daily.  We tried configuring it at the task level, but that is not apparently what the function is for and we have an open case for it.Thanks,

    Ed Contini
    9:34am, May 17 
    Hi Bill,
    The email should fire in the even of failure of an outbound message. Is your failure for an outbound or an inbound message?
    - Ed
    William Culley 
    10:16am, May 17  
    Hey Ed,
    I believe we've figured this one out.  We had the failure email being set at the task level and not the agent level.  So the agent failure did not equate to a task failure and we were not receiving the failure email.
    Thanks for you assistance,
    Bill
    Anthony Erickson 
    2:51pm, May 18 
    We have a related issue to this which might provide some useful information.  By turning it on at the Agent level, it will also fire when an inbound update fails.  Where you are integrating tickets to external systems, we've found it's possible for updates to be made to an already-closed ticket in the remote system which tries to send an update after the Requisition has already closed.
    This triggers a failure notification for us, and the 3 failures we experienced were outnumbered by about the 300 false errors we received daily.  We tried configuring it at the task level, but that is not apparently what the function is for and we have an open case for it.
    Thanks,
    Ant
    We have a related issue to this which might provide some useful information.  By turning it on at the Agent level, it will also fire when an inbound update fails.  Where you are integrating tickets to external systems, we've found it's possible for updates to be made to an already-closed ticket in the remote system which tries to send an update after the Requisition has already closed.This triggers a failure notification for us, and the 3 failures we experienced were outnumbered by about the 300 false errors we received daily.  We tried configuring it at the task level, but that is not apparently what the function is for and we have an open case for it.
    Thanks,
    Ant

  • Workflow-Attaching pdf from Custom Concurrent Request to email notification

    Hi,
    I was wondering if anyone has done something similar before and maybe have any suggestions?
    I am trying to attach a .pdf file that is generated by a custom concurrent request report to an email notification.
    The .pdf is generated correctly and I can access the file but I’m having problems trying to attach it to the email notification
    I have tried to use Wf_Engine.SetItemAttrText and Wf_Engine.SetItemAttrDocument but are unable to get it to attach the file.
    Does anyone know where I can find an example how to use either of the above API's? and a detailed explanation of them?
    Should the attachment always be in FND_LOBS to be picked up or can it be picked up from the file system?
    What should the Workflow - Notification - Performer Value be set to, that is referencing the message with the Document Attribute?
    I'm unable to find a detailed explanation of how this can be done in the Oracle Workflow Developers Guide Release 2.6.4.
    Any reference material or guidance as to where an example can be found will be greatly appreciated
    Thanks
    Coenraad

    The PLSQL procedure that generates the PL/SQL BLOB documents must follow standard API formats and a sample is shown below.
    procedure GENERATE_PDF(document_id in varchar2,
    content_type in varchar2,
    document in out nocopy blob,
    document_type in out nocopy varchar2)
    is
    l_docid pls_integer;
    l_filename varchar2(100);
    l_errmsg varchar2(100) := 'The Document is not found in the Database';
    l_bdoc blob;
    l_data_type varchar2(100);
    begin
    l_docid := to_number(document_id);
    dbms_lob.CreateTemporary(l_bdoc, FALSE, DBMS_LOB.Session);
    SELECT file_data
    into l_bdoc
    FROM fnd_lobs
    WHERE file_id= l_docid;
    dbms_lob.Copy(document, l_bdoc, dbms_lob.getLength(l_bdoc));
    exception
    when others then
    dbms_lob.WriteAppend(document, length(l_errmsg), l_errmsg);
    wf_core.context('SA_MLRTST','GENERATE_PDF',document_id);
    raise;
    end GENERATE_PDF;
    You can use FND_LOBS or any other table to get the content. The content must be stored into the corresponding table before using it.
    The following is the PLSQL script for generating BINARY data for a file
    declare
    l_bfile BFILE;
    l_temp_blob blob;
    l_docid number :='1000';
    l_ctype varchar2(300) :='application/pdf';
    l_filename varchar2(50) :='testfile.pdf';
    begin
    dbms_lob.createtemporary(l_temp_blob, true, dbms_lob.session);
    l_bfile := BFILENAME('OEX_INPATH',l_filename);
    dbms_lob.fileopen(l_bfile, dbms_lob.file_readonly);
    dbms_lob.loadfromfile(l_temp_blob, l_bfile, dbms_lob.getlength(l_bfile));
    INSERT INTO fnd_lobs(file_id, file_name, file_content_type,file_data,file_format)
    VALUES( l_docid,l_filename,l_ctype,l_temp_blob,'binary');
    end;
    OEX_INPATH - this is a database directory, you need to copy the pdf file which you want to convert to BINARY to the location which this directory points
    l_filename - name of the file which need to be converted to BINARY format

  • Email notification status after deployment finished in sccm 2012 r2

    We run 300+ server security patch update deployements every weekend with limited human resources to check when a deployment job is finished. Our limited weekend staff needs to run post deployment checks failed deployments . Is there an option in SCCM
    2012 R2 to send a email notification once a job is finished?

    I haven't taking a Powershell scripting class yet, so this will be kind of difficult to make work for what it is i am looking for. So i have to modify an Application Request script just to get a job done email notification SCCM 2012?
    Yes. There is no builtin functionality to send email when deployments have run.
    Don't retire TechNet! -
    (Don't give up yet - 13,085+ strong and growing)

  • SharePoint Foundation 2013 installed on Windows Server 2012 not sending out email notification

    I have a server where i installed SP Foundation 2013 on top of Windows Server 2012. I have configured the SMTP as well as the outgoing SMTP in Central Administration
    of SharePoint. When i create an alert on a document library, its did not sent any email notification on the changes made to the document in the document library. So, i created a workflow to send out email using SPD2013. The workflow run, but it cannot sent
    out email with error saying that outgoing email is not configured correctly. I have checked with another server which i installed SP foundation 2013 on top of Windows Server 2008 R2 - its sending out email just fine using same configuration and outgoing SMTP.
    I need help to resolve this issue or at least the cause of the problem.
    Any help is greatly appreciated.

         
    Try below:
    http://social.technet.microsoft.com/wiki/contents/articles/13771.troubleshooting-steps-for-sharepoint-alert-email-does-not-go-out.aspx
    Go to Central Admin ---->Operations----->outgoing email settings and verify that SMTP server is mentioned correctly 
    2) Test the connectivity with the SMTP server.
    In order to do that follow these steps:
      Open  cmd
      telnet <SMTP server name> 25 ( We connect smtp server to the port 25)  
                     you should see a response  like this 220 <servername> Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 ready at date and time
                     Beware that different servers will come up with different settings but you will get something
                     If you dont get anything then there could be 2 possible reasons, either port 25 is blocked or 
                     the smtp server is not responding.
      For testing response from your server
                       For testing response say ehlo to it.
                            Type :
                                        ehlo <servername>
                            output:
                                        250 <servername> Hello [IP Address]
      Now a test mail can be sent from that SharePoint server. 
                          Now we need to enter the From address of the mail.
                          Type :
                           mail from: [email protected]
                           output:
                           250 2.1.0 [email protected]….Sender OK
     It's time to enter the recepient email address.
    Type : rcpt to: [email protected]
    output:
    250 2.1.5 [email protected]
     Now we are left with the data of the email. i.e. subject and body.
    Type : data
    output:
    354 Start mail input; end with <CRLF>.<CRLF>
    Type:
    subject: this is a test mail
    Hi
    This is test mail body
    I am testing SMTP server.
    Hit Enter, then . and then Enter.
    output:
    250 2.6.0 <<servername>C8wSA00000006@<servername>> Queued mail for delivery
    Type: quit
    output:
    221 2.0.0 <servername> Service closing transmission channe
    3)  Check alerts are enabled for your web application
          verify if the windows timer service is running or not.
          Run this stsadm command to check that
          Stsadm.exe -o getproperty -url http://SharePoint-web-App-URL -pn alerts-enabled
         This should return <Property Exist="Yes" Value="yes" />
         If you don’t get this, Enable alerts by:
         stsadm.exe -o setproperty -pn alerts-enabled -pv "true" -url http://SharePoint-web-App-URL
          If its already enabled, try turn off and turn on it back.
    4)  Check the Timer job and Properties
           Go to
           MOSS 2007:  Central Administration > Operations > Timer Job Definitions (under Global Configuration)
           In SharePoint 2010: Central Administration > Monitoring > Review Job Definitions 
           Check whether the "Immediate Alerts" job is enabled for your web application. check these properties:
                       job-immediate-alerts
                       job-daily-alerts 
                       job-weekly-alerts
           stsadm.exe -o getproperty -url "http://Your-SharePoint-web-App-URL" -pn job-immediate-alerts
           The expected output is:
           <Property Exist="Yes" Value="every 5 minutes between 0 and 59"/>.  
           If you don’t get this, run the following command to set its value.
           stsadm.exe -o setproperty -pn job-immediate-alerts -pv “every 5 minutes between 0 and 59" -url http://Your-SharePoint-web-App-URL
    5)  Check whether the account is subscribed for alerts and it has a valid email account. This should be the first thing to check if the problem persists for some users not for      all.
    6)  Then check if at all those users have at least read permission for the list. Because the first mail should go out for every user without security validation but the next ones       won't be delivered unless the user has at least read
    permission.
    7)  If it is happening for one user, can also try to delete and re add the user in the site.
    8)  Most importantly , you should try this one.
          Run this SQL query to the content db < Select * from Timerlock>
          This will give you the name of the server which is locking the content database and since when.
          In order to get rid of that lock 
          Go to that server which is locking the content db and then restart the windows timer service.
          within some time it should release the lock from content db, if not then at the most stop the timer job for some time
          Once the lock will be released then try to send some alerts
          You will surely get the email alert.
    I found this is the most probable reason for alert not working most of the time. We should start troubleshooting with above steps before coming to this step for any alert email issue but from step 1 to step 7 are best for new environments or new servers.
    If the issue is like this ,alert was working before and suddenly stopped working without any environmental change then above conditions in step 1-7 should be ideally fine.
    Even after this if it is not working, then you can try these few more steps too
    9)  Try re-registering the alert template:
    stsadm -o updatealerttemplates -url http://Your-SharePoint-Web-App-URL -f  "c:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\XML\alerttemplates.xml" -LCID 1033
    10)  Try to clear the configuration cache
    If this helped you resolve your issue, please mark it Answered

Maybe you are looking for

  • HT1689 On my ipad, how do i change the store account from one country to another

    I keep getting a message to change the store account, sign out, then sign in from another store.

  • CALS table in CS3: Table style ??

    Hi, It's not script related but as the xml features are mostly used by developpers, i will be asking here.. The xml format to import table is a bit underdocumented but i was able to find how to assign style using "aid:pstyle" or "aid:cstyle"... wich

  • RBL lists with Apple Mail

    Is it possible to use RBL lists with Apple Mail? Message was edited by: MacDaniel

  • Iphoto pictures went away

    I was prompted to update my photos to work with iPhoto 11, version 9.4.3 (710.42)  After three hours (3,103 pictures in the library) the progress bar seemed to be stuck.  I had stepped away from the machine.  Now I have no images, blank pictures.  Pr

  • Mac Pro won't restart

    We have a late 2008 Mac Pro that won't restart from the Apple menu, nor are we able to reset the PRAM with the keyboard. The computer will almost shut down, but hang right at the end, making the DVD drives click on and off. We have tried the followin