ASKB works when Posting in GL indicator is 4 ?

Hi,
Can you please clarify the below.....
In OADB, two of dep.areas (10 & 20) mentioned as "Real" and Posting in GL indicator is 4(Area posts APC directly and Depreciation).
Scenario: I posted a APC transaction but as a GL is blocked for the other dep.areas (10 &20) , the APC value posted for 01 area but not posted to other dep.areas.
I corrected the GL and ran ASKB then APC value posted to other two dep.areas.
Question: Even though Posting in GL indicator is 4(Area posts APC directly and Depreciation), ASKB works here. I do hope, ASKB works....Can you please confirm that as it's Std. SAP behaviour?
Thanks in advance!
Murali

Thanks Alex.
Will ASKB work when Posting in GL indicator is 6 (Area posts only APC directly) also?
Any limitations are there?
Thanks in advance !
Murali

Similar Messages

Crystal Report not working when posting the report to the Crystal Server.

Hi All,
I created a report using Crystal Reports 2008 with two ODBC connections (User DSN's). When I run the report in Crystal Reports (where I originally created it) it runs fine with no problems.
I am now trying to load it on Crystal Server 2008. When I try to run this report in InfoView, I get a message: "Error Failed to open the connection." I am thinking that it has to do with the ODBC connections but I am not quite sure. Could someone lead me in the right direction? How will the report that I now saved in the repository on the server connect to the ODBC stream?
Thank you in advance.

Solved my problem. I had to tweak the ODBC drivers on the server.

LoadMovie working in Flash Player, but not when posted online

I have built a website
utilizing Dreamweaver and Flash. This page:
http://www.tonystubbs.com/print.html
has a link under "print" called "catalog". It is supposed to load a swf file when clicked. It works when I view it in Flash Player, but when I import it into Dreamweaver and post it, it isn't working.

It is likely an issue with file location/targeting since you appear to be loading the swf into the html page from a separate folder. When you do that, any files that the swf file loads need to be targeted as if that swf is in the same folder as the html file. So if your other swf is also in the images folder, then when you specify to load it in the Flash file you need to include the images folder in the path.

Hi i have an ipod A1099 but it doesn´t want to work, when I try to charge it, its present the apple on the screen and then post a message saying this page

Hi i have an ipod A1099 but it doesn´t want to work, when I try to charge it, its present the apple on the screen and then post a message saying to visit apple support. Please help me, I don´t want to loose my ipod.

Hi thenicegirl07,
It sounds like your Click Wheel iPod is showing a sad iPod icon. If it will go into Disk Mode you may be able to restore it, take a look at the article and quote below for more information about the alert and possible resolutions.
iPod displays a sad iPod icon
http://support.apple.com/kb/ts1373
Resolution
In most cases, the sad iPod icon indicates a hardware issue. If you are able to force iPod into Disk Mode, then it may not be a hardware issue, and you should try to restore your iPod with the latest software.
If you cannot force your iPod into disk mode and restore it, then your iPod is in need of service. Set up an iPod Service Request or make a reservation at the Genius Bar before visiting your local Apple Retail Store. To make a reservation:
Go to http://www.apple.com/retail/storelist/.
Choose an Apple Store location.
Click the Reserve link under Genius Bar.
Choose iPod.
Select your desired reservation date and time.
For an easy to follow QuickTime movie, view the Troubleshooting & Extras section of the iPod Tutorials atwww.apple.com/support/ipod/tutorial.
Additional Information
iPod displays a folder icon with an exclamation point
-Jason

Dell laptop headphone jack does not work when playing audio and video in Firefox 27

My problem is similar to the one posted in this thread: https://support.mozilla.org/en-US/questions/986978?esab=a&s=laptop+headphones+don%27t+work+with+firefox&r=2&fpa=1&as=s
I believe it has little to nothing to do with extensions.
I have just installed Firefox 27 on the Dell Inspiron 3520 laptop of a friend. She is an unsophisticated user who has a computer for email, simple web browsing, and watching YouTube and other online videos. Because she frequently seems to end up with junk on her machine, I wanted to switch her over to Firefox so I could install ad and script blockers that would hopefully slow down the frequency of adware and malware roosting in her system.
The laptop is a Dell Inspiron 3520 with an Intel celeron CPU (64-bit), running Windows 8. There are standard end-user applications installed (Adobe Reader, VLC Media Player, etc.), but no tweaking utilities, etc. The audio drivers are Cirrus Logic High Definition Audio.
I've been troubleshooting the laptop today trying to track down why the integrated speakers continue to work when the headphones are plugged in, with no sound coming through the headphones. Because I had run a series of virus / malware / adware scans just before installing Firefox, I thought I had mistakenly deleted some system audio files.
It finally became clear after toggling multiple settings, playing with Windows and Dell sound settings, and experimenting, that the headphone audio jack still works as it should in the system itself (for example, playing videos through VLC Media Player) and in Internet Explorer. It is only in Firefox that plugging in the headphones does not send audio through the headphones nor cut out the integrated speakers.
Sometimes there is a silencing of the integrated speakers for a few seconds, but then the audio kicks in again. (I am using YouTube and a certain movie streaming website to test the audio).
However, if the headphones are plugged in before starting the videos, the sound comes through the headphones, but unplugging the headphones, then reinserting them, stimulates problem again. Not only that, but then in YouTube the video will stall and can't be restarted until the page is reloaded.
Again, this is a fresh Firefox install of less than 24 hours, with only Adblock, Adblock Plus Pop-up Addition, Flashblock, and NoScript installed. There are no themes installed and most of the Options are the defaults that are set upon installation.
I have both disabled the add-ons and uninstalled them entirely before testing the headphone funtionality. In both instances the problem persisted. I've also uninstalled and let Windows re-install the Cirrus audio drivers.
Does anyone else have any insight into this problem, and any potential solutions other than "start in Safe Mode" and "reset Firefox"?

Firefox can switch audio devices within ~ a + or - 10 minute period or so (Just a guess). At which point it latches onto the audio device and will never change until the entire process is shutdown (read last paragraph, there is an exception)
Ive had this problem for a few months now, at least. And I switch back and forth from my sound system and my wireless USB headset.
If anything will fix this i believe it would be disabling "Allow applications to take exclusive control of this device" in the properties of your default audio device, but i doubt it. I think this is an issue regarding the code in firefox itself.
I'd like to see this turned into a default feature, being able to disable and enable the ability to stay on whichever device was the default at the time of launch, or to always play on the current default device, even if its changed. That or being able to choose a specific device/devices (WOULD LOVE TO THIS).
Other than that I dont really have a solution, and I kind of doubt anyone will unless its addressed in the next update.
Oh I thought of one solution that doesnt require restarting firefox, disable the current audio device and the sound will automatically switch to the next available device. Or possibly when a new device is introduced?? I havent done much testing on the matter though. This is just my best guess based on my personal experience with firefox.

Flex: Method doesn't work when being called on parentDocument

Hi,
I wonder is anyone can look at this code and tell me why calling the removeSelectedChild works when called from the same document, but returns the following error when called from the child document/component.
"ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller."
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" >
<mx:Accordion id="myAccordion"
width="100%" height="100%"
selectedIndex="0">
<mx:Script>
    <![CDATA[
      public function removeSelectedChild():void {
        myAccordion.removeChild(myAccordion.selectedChild);
    ]]>
</mx:Script>
<mx:headerRenderer>
    <mx:Component>
      <mx:Button click="{ parentDocument.removeSelectedChild() }" />
    </mx:Component>
</mx:headerRenderer>
<mx:HBox>
    <mx:Button click="{ removeSelectedChild() }" />
</mx:HBox>
</mx:Accordion>
</mx:Application>
Clicking on the button in the child produces the expected result, whilst clicking on the header throws an error despite the fact they both call exactly the same method.
Sorry that the example is a little contrived, this problem arose in a quite complicated view, which was using all kinds of custom components. This was the only way I could display it in a way that will be quick for you to compile and easy to focus on the real issue without background noise.
I'm pulling my hair out on this one and would really appreciate it if anyone could help.
Cheers,
Chris

What are you trying to remove?
myAccordion.removeChild(myAccordion.selectedChild);
tries to remove the container, which is the child of the Accordion. Is that what you want?
Also, I'm wondering if parentDocument.removeSelectedChild() would try to remove the Accordion.
If this post answers your question or helps, please mark it as such.
Greg Lafrance - Flex 2 and 3 ACE certified
www.ChikaraDev.com
Flex Training and Support Services

Me edge animate project works when I test, but not when I publish. Please help.

I feel like this has happened to me in the past, but I just cannot get the thing to work when I post it online. It's just a blank page, all white. I think there might be something in the code of one of the .js files that I need to change.
?? I saw something about the phrase 'use strict' but I can't find that code anywhere.
There must be something I'm forgetting. I put all of the published files up on the server, and I just can't access it. Any help would be seriously appreciated.
Thanks.

Can you share the website link so that we can see what the issue is?
Regards,
Vivekuma

HI I have an Iphone 3GS and the microphone jack works when I play music but not when making phone calls. please help as I use it for conference calls

Hi I use my phone for conference calls and use the microphone jack to connect to speakers. It doesnt work when making phone calls but when i play music on the phone the jack works with the external speaker.

Happy to have been of help. Hope all goes smoothly.
BTW, for the sake of others who may help you here, it's usually most polite if you mark the post that answered your question as being the one that "solves" it, not your own post. That's how people get points here, if a questioner marks their post as either "helpful" or "solving". It's not an issue for me, but for those just starting out in the forums it may be important to them. See:
https://discussions.apple.com/static/apple/tutorial/mark.html
and
https://discussions.apple.com/static/apple/tutorial/reputation.html
Regards.

Flex app doesn't work when moved from original location

I'm trying to make an image gallery in flex. It works when I run it in Flex Builder perfectly fine. The html and swf files from the bin-debug folder work perfectly fine when opened in any browser also, but ONLY when those files and all related files are opened from the default location that the application was built in. When I export a build to a different folder, the swf loads but none of the information from the xml file displays. I tried setting all of the paths of the reference files (namely the xml) in the flex app to the exact absolute location on the server, and it still didn't work when I uploaded it to the server.
I've tried several approaches starting from scratch and they have all come up with the same issue. I'm working with an educational license for Flex Builder, I'm not sure if they jip you on those and ruin the compiled swf.
Please help! I'm losing my mind over this.I think it has to do with something else besides the code since it works fine when I hit "Run", but if anyone thinks it will help to post the code let me know.

when you build an application using one of the wizards (like coldfusion flex application wizard) it hard codes
paths to cold fusion CFC's, and sometimes gets it wrong.
If your application references cfc's (or other remote objects) then it may be necessary to adjust the flex code
when moving the code into a different base folder.
For example in my own application, the url is http://localhost/crm_dev_flex and the built application gets put into
c:\inetpub\wwwroot\crm_dev_flex\bin-debug
References in the code to components found in c:\inetpub\wwwroot\crm_dev_flex\bin-debug\components\cfgenerated
(in the flex code these looks like crm_dev_flex.bin-debug.components.cfgenerated.<mycomponent> )
These need to change when you move the code to somewhere else.
Also, if you are using wizard generated cfc's then these also contain similar references that need to be changed.
IHTH.
Cheers

My Airport Time Capsule only works when I turn off and turn on, but I think this may end up with the unit. What can this happening and how to solve?

Time Capsule Airport
Hello to all, good day, sorry my english google, but it is the tool I have at the moment. I'm having trouble with my Time Capsule Airport, I made all the settings according to the manual, but there has been a connection problem with my iMac. When I finish my work I turn off the imac and then again when they return to work and care, it can not connect to Time Capsule Airport, making it impossible to remove the files and make back up by Time Machine only works when I turn off and turn on the Airport Time Capsule , but I think this may end up with the unit. What can this happening and how to solve? Thank you.
Olá a todos, bom dia, desculpe meu inglês google, mas é a ferramenta que tenho no momento. Estou tendo dificuldades com a minha Airport Time Capsule, fiz todas as configurações de acordo com o manual, mas tem existido um problema de conexão com meu iMac. Quando termino meus trabalhos desligo o imac e depois quando retorno pra trabalhar novamente e ligo, ele não se conecta a Airport Time Capsule, impossibilitando retirar os arquivos e fazer o back-up pelo Time Machine, só funciona quando desligo e ligo a Airport Time Capsule, mas acho que isso pode acabar com o aparelho. O que pode esta acontecendo e como resolver? Obrigado.

This is easier to do with pictures perhaps.. since we do not share a common language and machine translation leaves a lot to be desired.
In the airport utility bring up your Time Capsule.
Simply post the screenshots here.
So here is mine.
Click on the Edit button and give us the Internet and Wireless and Network tab..
eg.
Please also make sure you are set to ipv6 in your wireless or ethernet .. whichever is used.. and do tell which.
This is wifi in your computer.
The following are important..
DO not use long names with spaces and non-alphanumeric names.
Use short names, no spaces and pure alphanumeric.
eg TC name. TCgen5
Wireless name TCwifi
Use WPA2 Personal security with 10-20 character pure alphanumeric password.
read apple instructions to help with TM and TC.. they did finally admit it has issues in Mavericks.
OS X Mavericks: Time Machine problems
Mount the TC manually in finder.
AFP://TCgen5.local
When asked for the password .. that is the disk access password and save it in the keychain.
Reset Time Machine
See A4 here. http://pondini.org/TM/Troubleshooting.html

Validation not working when clearing an open item

Hi SAP Gurus,
We have a interesting scenario to discuss with you. We are using Legal Dunning Procedure so once legal action is intiated against the customer notifications are sent to the legal department if payments are received.
Unfortunately this can happen only during the next dunning run which of course can occur in varying time intrevals. Therefore we need a validation to occur if a payment is received from a customer against whom legal action has been initiated.
We tried using the following fields Date of the legal dunning proceedings, Dunning block, Dunning key, Dunning level but are not able to get the validation to work when attempting to clear the open item. These all work when trying to post a new document but fail when trying to clear a open item. Points will be given for helpful answers.
Regards,
Siva

this is the radio button
<af:selectOneRadio value="#{bindings.Gender1.inputValue}"
                                                 label="#{bindings.Gender1.label}"
                                                 required="#{bindings.Gender1.hints.mandatory}"
                                                 shortDesc="#{bindings.Gender1.hints.tooltip}"
                                                 id="sor5">
            <f:selectItems value="#{bindings.Gender1.items}" id="si7"/>
          </af:selectOneRadio>
i use this sample
http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/ADF_Insider_Essentials/ADF_Insider_Essential_YesNoRadio/ADF_Insider_Essential_YesNoRadio.html

Authorization Object is not working when report is modified.

Hi BW Guru's
We have Company Code as Authorization Object .and we have 3 company Codes (xxxx,yyyy,zzzz).where the users under Company code xxxx are not supposed to view company code yyyy,zzzz data etc.
I modified an existing Report and transported to production.But the Authorization Object is not working for that report.The Report is defaultly displaying all the company codes data(xxxx,yyyy) for all the users.But for the other reports its(company code ) is working fine.
What could be the problem?Is theproblem in transporting the objects.But i transported all the objects inluding auhorization object.
Please send me the solution as it is very much urgent.
The solution will be def. awarded with full points.
Regards
Sanjay

hi Sanjay,
please don't post the same question again, check and response back from your previous thread
Re: Authorization Object is not working when report is Modified.
hope this helps.
would be nice if you reward for helpful answers to all of your previous postings, e.g
docs related to RRI

Why Dynamic Parameter is not working, when i create report using stored procedure ?

Post Author: Shashi Kant
CA Forum: General
Hi all
Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
is not shown to me when i referesh the report for viewing the results.
I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
============================================================================================
1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
Dynamic Parameters in Action
My question is that whether dynamic parameter is working with storedprocedure or not.
When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
Please reply soon , it's urgent
Regards
shashi kant

Hi Kishore,
I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
=lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
As to the second issue, please try to use the following expression:
=Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl file with all the size properties to us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

JInternalFrame not opening in JAR file, but works when not in JAR

I have a folder that contains multiple .class files. I make all the class files into one jar file with this command:
jar cmf mainClass.txt myapplication.jar *.class
The mainClass.txt contains the following:
Main-Class: myapplication
class-path: myapplication.jar
The myapplication.class opens up a JDesktopPane inside a JFrame. It also contains a start menu, which again has elements that opens up misc JInternalFrames inside the JDesktopPane. The problem is this:
When I run the application from a .bat file, everything works fine. However, after making the JAR Executable file, everything works except 1 JInternalFrame. Now, the code for this JInternalFrame is far too much to post, so I'll have to ask as follows;
Are there any reason why a JInternalFrame would not work from inside a JAR Executable, but work when not in the JAR file? Especially when other JInternalFrames are working? What can make 1 JInternalFrame different from the others in this regard?

Perhaps the problem lies somewhere else.
Obviously if other JInternalFrames are working then there is a difference in the one missing internal frame that causes it not to show up.
My guess is that perhaps you are missing one or two classes in your JAR that are used by that JInternalFrame and that an exception is being thrown causing it not to show.
Double check the contents of your JAR and make sure that all the classes are present and that they are the right versions.

I have an iPhone 4S I have done the recent update 6.1 and now my App Store is not working when I go into the feature tab I get an error " too many HTTP redirects" how do I fix this ? The other tabs are working and it is working on my iPad also

I am having a problem getting into the App Store on my iPhone since the recent update, I have a 4s and it appears the feature tab is not working. When I try to go into the feature tab in the App Store I get a message "too many HTTP redirects" ?... Does anyone now hoe to fix this issue, the other tabs are working okay and everything is working on my iPad ?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

ASKB works when Posting in GL indicator is 4 ?

Similar Messages

Maybe you are looking for