Asking for Advice

We are planning on a buying the new 27-inch iMac for the family. I am going through difficulties in choosing between the 2.93GHz Core i7 or the 3.6 GHz Corei5 configuration for the 27-inch iMac. I have read through different posts explaining how CPUs with a lower number of threads(i5), but a higher clock speed would top CPUs with more threads(i7) and lower clock speeds. I understand that in Intel's Turbo-Mode the i7 can reach clock speeds of 3.6GHZ, but I still believe it wouldn't top the i5 that runs on 3.6GHz natively, and boosts to 3.86GHz under specific conditions. I also, read that the i7 is better for the "future" for having 8 thread on a single die. However, I also came across a post about how PC(iMac) needs more RAM to fully utilize i7 with its 8 threads.
I am a little lost to choose which option is better for us. I only know that I want this iMac to live long, and serve well and be utilized to its fullest potential(I don't wanna pay more for an 8 threads i7 CPU that would only have 2 threads working 80% of the time)
I would be grateful for any helpful insights or clarifications

I think, in addition to general purpose computing, this iMac would be heavily used for creating documents and spreadsheets for work. I know that these needs are met with almost any iMac from the new line-up and even older iMacs.
But this isn't what worries me, what worries me is how long is this iMac going to survive?
I understand you want to invest wisely. There's more than one way to do that.
One, you can buy the best Mac you can afford, and hope it will last a long time. It might, or it might not, there's no way to tell.
Or, buy the cheapest Mac that will meet your current needs, and save your money to upgrade later when your needs change.
A $100 used G4 would do a nice job of doing what you've described so far.
That leaves almost all your budget reserved for adapting to the future as needed.
You could test this theory by buying a used G4, and giving it a try. If it doesn't work out keep it as a back up machine. My iMac just died after 7 years, and I was back up and running in minutes because I had an old G4 standing by, ready to go to work.
Best of luck!

Similar Messages

Asking for advice--for beginning (but artistic) photographer. Recommend Lightroom 5 or Photoshop Elements 12 (Windows 7 OS)?

Asking for advice--for beginning (but artistic) photographer. Recommend Lightroom 5 or Photoshop Elements 12 (Windows 7 OS)?

MarwanSati your install log appears to be free of errors. I would recommend you post your inquiry about accessing this feature within the Photoshop Elements forum.

First post - Asking for advice

Hi all,
For work and personal reasons I have decided to try to learn Java. I don't have much experience with computer languages - just the BASIC I learnt at school 20 years ago and messing around with VBA in Excel.
To start with I'd just like to ask for advice so I hopefully start in the right way.
Firstly, I have downloaded an online book by Bruce Eckel called 'Thinking in Java'. Does anyone have an opinion on if this is a good source to learn from, and if not, a recommendation?
Also, is it best to get an IDE, or just use Notepad to start with?
Lastly, are there any conventions for where to put 3rd party packages and my own code? I'm thinking specifically of the code that comes with the Bruce Eckel book unless anyone puts me off learning from it.
Any other advice for someone starting out would also be greatly appreciated.
Thanks for reading, and I hope I won't be asking too many dumb questions as I go along.
Gary

In the hope that it will save typing out long paths,
I've created a new folder in the c drive (called
Java), with 2 folders inside that - one for 3rd party
libraries (if that's the right word),which I've
called lib (is that bad?) and one for my code (code).
I'm sure it will grow but I'm hoping that will be
enough for me to start learning.lib and code are fine... I use tools and projects respectively at home, but it really doesn't matter that much. What does matter - if you are interested in handling things somewhat fundamentally - is this. You are going to be building and running, setting classpaths, referring to that libs folder etc from command line scripts (batch files) or build scripts (like ant). That location will at some point change, so you want to make your scripts flexible and define that path in only one place. For the same reason, relying on the CLASSPATH environment variable is often discouraged.
At first you'll probably not be using scripts but just type the commands on the console, that's fine, just at some point you'll get tired of typing the same things over and over :-)
The packages that come with the Bruce Eckel book (which are all in a folder called COM) If I'm not mistaken, com would be the root package folder for Eckel's source, as in for example package com.bruceeckel.util. To keep it separated from other libraries which may also have com as first package part, I'm thinking that folder com should be e.g. here:
C:\Java\libs\ThinkingInJava\com
C:\Java\libs\ThinkingInJava\com\bruceckel\util\I hope I'm not confusing you now, but in the long run you will be glad if your libraries are organized properly. The meaning of packages and their relation to folders is explained in Eckel's book so it will become clear.
As for getting there, you seem to have the right attitude, good luck and have fun!

Asking for advice on adding products with descriptions to webpage

I am a web design and dreamweaver newbie and am in my very limited experience, working on creating a virtual mall. I'ts something I always wanted to do...go figure..lol. I do have a lot of companies that will advertise and I have access to their Java and HTML links. I have created (in my mind...lol) I pretty decent start on a homepage from a free template and I want to create pages with pictures and descriptions but I am not sure the best way to go. I cannot afford to have a pro do this for me so I am fishing for some good advice. I know about creating tables but I hear that tables are so 90's and dreamweaver can do it better in a different format. I have looked through the forums for advice but not have found what I am specifically looking for. The way I have it from the homepage is that I have links to product types in the content portion of spry accordian and created pages akin to my homepage to display them but from there...not sure. I do not have a lot of available free time, hardly any to be honest, so if anyone can point me in a good direction or have any good ideas, I would really appreciate it. Here are my questions:
1. Is there a better method to display products besides tables in CS4, and if so, how would I best proceed? The idea is 3 columns and 4 rows of products with descriptions underneath. The links provided by the companies would take them to the company website to purchase. I didn't want to alarm the companies by posting a site without some products available but I need some help.
2. Is it possible and if so, is it a good idea to add a spry tabbed panels into the content portion of the spry accordian? Would I have to establish an editable region or something specific to allow it to be functionable?
Separate Question:
1. I am not sure if I can even ask this coherently but will give it a shot Does DW have a tutorial on adding some type of flash css or revolving pictures to be built into my header area on the homepage? I do have DW fireworks and I really want to spruce it up...
I will load the homepage online today to www.virtmallshop.com. The product links pages won't be availabe except one to give a reference. Understand that you all know a heck of alot more about this then me so please be kind!
Thank you
D

For Umlaut, you could probably use phonetic keyboard. Highly recommended.
Use "Ukelele" to create keyboard layout and use dead key to map umlaut (like 'u = ü). With phonetic keyboard you can type as fast as with native keyboard (if not faster) and in unlimited number of languages, without re-learning the layout.
Brackets are quite easy accessible on Apple keyboard.

Asking for advice for Jabber deployment - multi CUCM cluster\AD domains

I would like some design advice for deploying Jabber and CUPS in our company. We have 2 locations, west coast (SiteA) and east coast (SiteB). Each site have their own CUCM 7.15 clusters, Unity clusters, AD domains (trusted, but not in the same forest).
At SiteA I have setup CUPS (8.6.3.10000-20) and jabber and have it working great.
I would like to setup CUPS\Jabber for SiteB, but they need to be able to IM\call\etc to SiteA (And vice-versa).
SiteA and SiteB both have CUCM LDAP sync turned on, and LDAP directory synced with both domains (although SiteA cannot authenticate to CUCM at SiteB, and vice-versa due to the fact you can only LDAP sync authentication with one domain, CUCM user database contain users from SiteA and SiteB).
We have SIP trucks setup to pass internal calls and line status(BLF) between the trunks, and can communicate via internal extensions just fine.
The problem I’m running into is my jabber-config files uses the EDI directory – which can only look at one domain, so I cannot search the other domain. I believe changing to UDS fixes this, but I understand it would require me to upgrade both CUCM clusters to 8.6.2 - unless I’m mistaken.
I’m aware the desktop sharing will not work until CUCM is upgraded to 8.6.1 or 8.6.2.
I’m wondering if anyone has any advice, or can confirm I’m on the right track. Thanks in advance!

The thing that's important to understand is how CUP and Jabber build the XMPP URI. The URI has a left- and right-hand side; the left is the username while the right is the XMPP domain. CUP uses the LDAP attribute specified in CUCM's LDAP System page, sAMAccountName by default, for the left-hand-side. The right-hand side is the FQDN of the CUP cluster. Jabber must use the same values as CUP when displaying search results. Take note that nowhere in this process does the entire XMPP URI originate from the directory source.
In your case you have two separate CUP clusters in two separate domains. This won't work because when a user searches for a contact in the directory using Jabber, the client will build the XMPP URI as [email protected]. Even if you got the other domain's user objects into the search results the right-hand-side of the URI would be wrong and the presence subscription would never succeed since the other cluster is in another domain. As such your first task must be to move the CUP clusters into the exact same fully-qualified DNS domain. Once this is done you can use Inter-Cluster Peering to build a larger XMPP network in which all users have the same presence domain. If you intend to do Inter-Domain Federation in the future this must be your public DNS domain, not your internal active directory domain. If you use a non-public DNS domain TLS handshake will never succeed for inter-domain federation requests.
Once you have Inter-Cluster Peering in place you can use Active Directory Lightweight Directory Services (the new name for ADAM) to front-end both forests. Both CUCM clusters would need to import the full list of users representing both domains and the sAMAccountNames must be unique across both domains.
Finally, you can instruct Jabber to use UDS and query it's local CUCM cluster which will be able to return a search result from both domains. Since the CUP clusters are peered in the same domain the XMPP URI can be built properly, the presence subscription can be routed to the correct cluster, and life will be good.
By this point hopefully it's clear that EDI won't cut it since it would be limited to only returning search results from the local forest.
Please remember to rate helpful responses and identify helpful or correct answers.

Save Part of Front Panel as picture - sharing VI and asking for advices

Hi,
I use LabVIEW 8.2.1. (DSC&RT),
It is common (at my work) that we want to save some parts of the Front Panel and to add it to the LogBook.
we usually do PrintScreen and then cut the picture to the boundaries we want using 'Paint'.
I have created a simple procedure that makes it easier and the user can now select the boundaries of the picture at the Front Panel.
You can see the 2 VI's attached, (try2.vi is a sub vi of try.vi)
Open 'try.vi' and press 'select boundaries' button and drag the boudaries with your mouse,
after you have selected the boudaries, press 'save picture' button.
I hope there are no bugs.
Originally I have wanted to use drag and drop, but i didn't really understand what is going on behind the scenes
when I used it.
For example - look at the example (at NI Example Finder at LabVIEW) 'Drag and Drop - Multiple Data Types to Start Drag.vi'
(C:\Program Files\National Instruments\LabVIEW 8.2\examples\general\dragdrop\Drag and Drop - Multiple Data Types to Start Drag.vi)
(or via typing 'drop' in at the NI Example Finder search)
1. I don't understand how the 'Drag and Drop Data' (located at the Application Control Palette)
2. I don't understand the inside terminals of the Event Structure of 'Drag Enter' and 'Drop' -
    for example - 'available data names' and 'accepted?'
   where can I get information help written about any of the Event Structure inside terminals?
   (it does not appear in the Context Help when I enter with the mouse)
3. Do you have any comments on the VI I did ?
4.I am planning to use this VI as a part of Log-In data to a follow-up LogBook Using Mysql as Database and NI sql connectivity toolkit,
   so users will be able to insert information to the LogBook from the Front Panel, and attach pictures of the Front Panel.
Did anyone here has performed anything similar ?
If you send me corrections of someting or any other NI item, please send it in a version that I can see it (I use Labview 8.2.1 DSC&RT)
Sincerely Yours,
Amitai Abramson.
Attachments:
try.vi ‏67 KB
try2.vi ‏23 KB

There are examples that come with the database connectivity toolkit so you are going to have to be more specific about your question. Whether you call it a logbook or something else, it's still a database and a database write is a pretty generic opertation. If you need help in the design of the database, then you should say that is what you need.
The event data is going to change depending on the event and the type of control. Again, do you have a specific question?

LJ 1100 Paper Feeder Jammed - Asking for Advice

My LJ1100 just broke, the drive may have stripped a gear, it makes a buzzing sound and won't pull the paper through. If anybody has an idea on how to get into the rear where the paper drive is, I would appreciate it. It is not accessible through the toner compartment in the front. Wish I had an IPB. I don't know where to unfasten the back of the box, or if it can be put back together without special tools. The only HP-certified printer shop in the yellow pages for a hundred miles around this smallish city just told me that they stopped fixing printers the first of the month unless you buy an annual contract for on-site service, and I am already stuck with the cost of a new type 92 toner cartridge that I put in it, 3 days before it stopped printing, so, I am stuck if I can't fix it myself.
If you can tell me how to get into the paper-feeder's mechanism, I will try to make the LJ 1100 useable again, and will not need to recycle it for several more years, I hope. Like a lot of people, I am laid off and out of work now, and don't want to buy another one until I can get a job to pay for it.

New here to say hello- ask for advice cloning HDD on a T60

Hi, my name is Adam-I am new here. And yes...I am windsurfer. Hello !
I have T30 (just selling, T43 (damaged-just beeing fixed) and T60 (I love it !).
I bought T60 recently and I am just upgrading it step by step. Its 3 GB RAM and T2400 1.83GHz CPU.
I have just bought 32 GB SSD and 320GB WD Scorpio Black. I want to "copy" - clone ? Win XP Pro and all software on SSD and fit it into main HDD place and my Scorpio will be fitted with caddy to replace DVD. That is what I want to do. I also have 250GB external Toshiba. But...I have never done this before and I am not IT specialist, also not very experienced with laptops. But I want to do that by myself, mainly to learn and to save some money too. Perhaps I should "clone" my current HDD 100% (software and files) on both SSD and Scorpio and than delete files from SSD ? Or copy all files on external HDD, delete them from current HDD and clone this HDD on SSD ? I would strongly prefer not to install Win and everything from scratch...what should I do and how ?
Obviously I am looking for easiest, safe way to to that job. Is that better to fit SSD with caddy into ultrabay and clone current HDD and than remove HDD and fit SSD into HDD place or perhaps I should put SSD into external case and clone current HDD with use of USB ? Sorry for so long list of questions...cheers
moderator note: information added to subject line for clarification.

Thanks ! In the meantime I can share my observation about WD Scorpio Black 320 GB: It vibrates so horribly (and makes lot of noise) that I am taking it back to shop tomorrow. My T60 vibrates, my hands feel that strong vibration, I can feel my huge, heavy dining table vibrating and its noisy...not acceptable for me. This is business laptop-that is how I use it - and I do not accept that level of vibration and noise Really disappointed.
If they (IT shop) accept to take it back , I will probably try Seagate 320 GB or 500GB 5400rpm/8MB...see what happens. I know vibration and noise are very subjective and that is why I made a comparison (same T60, same caddy): my Toshiba 250GB (removed it from case) is much much quieter than Scorpio and makes no any vibration...

Web Based Messageboard (JSP, XML, XSLT) - Just Looking For Advice Please!

I have a general question - I am not looking for any code, just some advice if possible. I am studying on a Masters course and I have been given an assignment to do which I am having difficult getting started. I have worked a lot with Java up until now, however this is the first time I have had to JSP on my course.
My current assignment is that I am required to create a simple web based message board, using JSP and XML, which allows users to post messages to the board, and also to reply to messages. The content of the message board is stored in an XML file, and there is no database involved. The message data needs to be formatted for viewing in a browser using XSL transformations.
I am stuck as to how to go about starting the project, and this is all I am asking for advice in. I have created the basic XML file which has some preliminary data stored within it, and I have created an XSL stylesheet to transform this data, however I am stuck with the JSP. Do I need to create a seperate JSP page for each page of the website? How does this link in with the XSLT?
I would welcome and really appreciate any advice, but I stress that I am not looking for anyone to give me any code or anything like that.
Thanks.

You can use XSLT to convert XML to HTML. Then include this HTML in your JSP. Further on you've a plain HTML form with an input field for a message which you submit to a servlet. In the servlet validate/convert/whatever this message and add it to the XML file and then forward/redirect the request back to the JSP.

Request for advice configuring/mounting XRAID

I'm asking for some advice about configuring Xserve RAID.
I am not an IT person, but just a researcher and have found
myself in charge of some computing resources.
We have an Xserve RAID - 14 drive, each set of 7 on RAID5 - connected
through fibre switch to an Xserve head node. (The fibre switch is
because we will probably add another Xserve RAID in future)
The intent for the RAID is to hold our data while we do our computations.
We have a small cluster of Xserve cluster nodes for distributed Xgrid and
Matlab computation. I intended to network mount the RAID on each computer
in cluster. All the users will ssh in to a shell, and none will login to
a desktop.
I have just begun to setup the RAID, but ran into some questions that
I thought I would ask for advice before I proceeded.
I have already striped both controllers together with software RAID.
(diskutil createRAID stripe "Journaled HFS+" "RAIDvol" disk2 disk3)
It created the stripe and created the jHFS+ file system, but I didn't
realize it would also mount it in /Volumes/RAIDvol
1. Do people have advice on whether I should keep this mount point?
I had rather thought I would mount in root (/) on head node and
cluster nodes, e.g. /RAIDvol instead of /Volumes/RAIDvol
(And how should I change the mount point? Evidently not through fstab
- should I use NetInfo(niutil) and is that complicated?)
Before I change it from mounting in /Volumes, are there any reasons not to?
(again, no one is going to see a desktop, everyone will ssh into a shell)
2. Should I have striped the disks together, or concatenated them?
(What's the difference? - any performance difference?)
3. Do people have advice on network mounting, AFP vs NFS? What
performance differences should I consider?
Thanks for everyone's help.
dmaus
Xserve RAID Mac OS X (10.4)
Other OS

>1. Do people have advice on whether I should keep this mount point?
By default all external volumes will mount under /Volumes.
It is possible to change, but I'd leave it there, it's not worth the hassle trying to bury it somewhere else, and if no one's logging into the desktop then no one's going to notice it anyway. Since it's being shared to the other clients it can be mounted at any point outside of /Volumes, but I'd leave it in /Volumes on the head node.
Trying to change this will just run into problems later on when Apple change their model.
>2. Should I have striped the disks together, or concatenated them?
(What's the difference? - any performance difference?)
Striping is better than concatenation.
The difference is in how the volume is laid out, and specifically how the data is written to the volumes.
If you write a large contiguous file to a striped volume, a chunk of data (32K by default) is written to the first LUN (half of the array) then the second chunk us written to the second LUN). This alternating pattern gives you the best throughput since the RAID is effectively writing to al 14 disks at once, and can be flushing the buffers on the first 32K while the next 32K of data is being written to the other LUN.
By comparison, concatenation simply appends the second LUN. As you write your file it is all written to the first LUN and it's only when this LUN is full that you start writing to the second LUN. Therefore your throughput is much lower since you're only using half the disks at once.
Concatenation is easier to setup since some volume formats allow you to grow a volume by simply adding more space at the end, whereas slicing requires a reformat, but those are your choices.
>3. Do people have advice on network mounting, AFP vs NFS? What
performance differences should I consider?
Performance is one factor, security is another. NFS doesn't offer any significant security other than which IP addresses are allowed to mount the volume. AFP supports authentication to ensure that the specific user can mount the volume.
This may or may not be relevant to you depending on how the clients are mounting the volumes, and whether you want there to be any crossover between the clients. If they're being mounted at startup (so the volume is always available) I'd probably opt for NFS. Home directories, on the other hand, would be better served via AFP.
Performance wise NFS might have a slight edge, but I've heard others say AFP does, so YMMV.

My hard disk crash..I lost my adobe software......I need a contact for advice....

In adobe page I cant get a mail to contact and ask for advice........
I can download all the programs...but I suppose I need a new serial number......
I want the mail of an adobe person so I can send him all my information and see if something can be done......thanks

Thanks Jeff............Yes I have the serial numbers.......I didnt have the oportunity to uninstall the license from my crash disk.......My plan is to install my old photoshop 2........then download the programs again.........then enter the same serial numbers?
I send you the information I have when I purchase the actualization?
thanks jeff

Ordering Infinity - what should I ask for

Hi everyone,
All in all I'm a fan of my BT service when it works (most of the time) - I hate the Indian call centre, love the advice/service from the contributors and mods here etc (probably a familiar scenario).
Anyway, I've just checked the BT Infinity availability and my phone/postcode shows that I can order as of today - last week it showed earliest date as end of March - todays change is the same for the TalkTalk fibre service so I think it's genuine (or at least from Openreach, not just from BT). Is this likely to be a real date or just trying to fish for customers? There have been a lot of Openreach engineers around lately, but I haven't seen them at my cabinet.
I want to get infinity to upgrade my current ADSL2+ service and thought I'd ask for advice to ensure I ask the right questions when I order my upgrade. Any comments welcome :-)
My current service is Phone + Broadband + BTVision. 5 months contract remaining on all services.
Phone: Rarely used except to receive PPI claims calls etc - ie, VERY low use.
Broadband - Heavy users: Me + Nagulese + 3 boys - Xbox, internet, youtube, streaming movies etc. Down ADSL has 11.5MBps sync with 10.5MBps useable connection. Up ADSL is approx 800 kBps.
BT Vision: Use catchup TV and ocasional movie rental, but movie rentals recently increased to 1 or 2 a week.
What I want is:
Contract: Not too worried if 12 or 18 months as long as it works.
Phone: Need the line only because it's necessary for BB/TV service - we use mobiles normally for calls.
Broadband: I want best infinity available - quoted as 59Mbdown / 19Mb up. I'm somewhere between 400m and 500m from my cabinet (depending on the route for the copper). I want unlimited service, but not to worried about P2P (which I think is included now anyway)
BT Vision: I have the BTV black box. I want to get youview and move the BTV box to another room. At the moment I'm not interested in the sports packages which need viewing cards, and I'm happy to wait for these to be available on linear channels. Will I be able to use both of these boxes on the same service, both as freeview boxes and also for BT Vision/youview? I'm currently using the BTV box on powerline adaptors (200Mbps work fine), but I'll probably re-wire with ethernet around the house in the near future.
In all I'm happy to wait for the right services. If I order and I'm told I need to wait 3 months for connection then fine, but I hate being told 'only 2 weeks' then having to wait 3 months - is there any way of getting REAL (not sales speak) dates etc?
As I said, any comments either good or bad are welcome, but please don't use the thread just to vent or whinge about bad services - constructive comments only.....
.....Cheers,
Alan.

place the order if your cabinet is active you will get a confirmed Install date
as to reliability the service is very stable I have personally had it since March last year not one disconnection I was quoted 66/20 when installed received 76/20 speed never varies more than +/- 1.5mb at any time hub has restarted once and that was for the firmware update to the HH3a
As to vision and Youview on the same line I am not sure but i do not think it is possible.
Maybe some one else could advise you there
this link should tell you if your cabinet is live and accepting orders http://www.dslchecker.bt.com/adsl/ADSLChecker.TelephoneNumberOutput
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Hi, I need help and advice. Basically me and my ex partner both had iphones and synced it with the same computer under the same ID. We split i have a new laptop and now it keeps asking for the old ID or it'll erase my apps bought on theold account.

Hi, I need help and advice. Basically me and my ex partner both had iphones and synced it with the same computer under the same ID. We split up and now im trying to get all my apps and info onto my new laptop with a new account but it keeps asking me for the old apple ID which she is still using and she changed the password. i tried backing it up but still nohing. When i try to back up purchased items being apps etc its keeps asking for the old one. help

See Recover your iTunes library from your iPod or iOS device. But you'll still need the password.
Once you have the computer authorized to use the account she could change the password again to stop you buying apps on her card (assuming it's not on yours!). It would lock you out of upgrading them too but they should work unless she uses the deathorize all feature.
It depends on how amicable the split is...
tt2

After forgetting the password for my iPhone, I am trying to restore it through iTunes, however, during the process, the phone keeps turning on and asking for the password, thus canceling the process. Any advice?

After forgetting the password for my iPhone, I am trying to restore it through iTunes, however, during the process, the phone keeps turning on and asking for the password, thus canceling the process. Any advice?

Yes, you will still get the prompt.
I meant reset then try the recovery mode restore again.
You can also try DFU Mode.
DFU (Device Firmware Update) Mode is different than Recovery Mode.
DFU Mode is a special mode where the device can still interface with iTunes, yet it does not load the iBoot bootloader.
DFU Mode:
Plug your device into your computer.
Turn off the device.
Hold the Power button for 3 seconds
Hold the Home button without releasing the Power button for 10 seconds
Release the Power Button but keep holding the Home button
Keep holding the Home button until you are alerted by iTunes saying that it has detected a device in Recovery Mode
NOTE: Make sure the device screen is blank and no logos are present. Be patient, it make take several trys.

Recently purchased a 2nd handed iphone 4 (that's all i afford) but when trying to create icloud account it give me "com.apple.appleaccount error 403" message. I am asking for support and advice.

recently purchased a 2nd handed iphone 4s(that's all i afford) but when trying to create icloud account it give me "com.apple.appleaccount error 403" message. I am asking for support and advice.

Did you already check this post?
Re: I am facing problem in signing in iCloud on my iPhone. when I enter my Apple ID, I got the message which is: "The Operation could't be completed. (com.apple.appleaccount error 403.)" Kindly solve my problem. I want to sign iCloud from my iPhone.worri

Asking for Advice

Similar Messages

Maybe you are looking for