Asking to connect to iTunes after upgrade to iOS 8

please can anyone help me, my daughter upgraded to iOS 8 last night on her ipad mini and now it is asking her to connect to iTunes, we don't have a computer with iTunes. What can she do? x

Do exactly as it says, connect it to iTunes to restore it. Follow the instructions below:
Use iTunes to restore your iOS device to factory settings
If you can't update or restore your iPhone, iPad, or iPod touch

Similar Messages

  • How to fix connecting to iTunes after upgrading to ios6

    How do I connect to iTunes  after upgrade to ios6

    iTunes on your computer or the iTunes store?
     Cheers, Tom

  • IPad asking me to connect to iTunes after updating to iOS 8.1.1

    iPad asking me to connect to iTunes after updating to iOS 8.1.1
    I have iPad which was updated to iOS 8.1.1 recently and after boot up of the iPad; it is asking me to connect to iTunes.
    Please let me know what might be the issue. Why is it asking me to connect to iTunes? How will I be able to restore the iPad to a working condition.
    Thanks in advance.

    It means that the iPad has gone into recovery mode (all software has bugs, operating system updates don't always go smoothly). You will need to connect the iPad to your computer's iTunes by its cable, and that should recognise the iPad and let you reset it back to factory defaults - you can then restore to you backup, or just resent your content to it.
    Recovery mode : http://support.apple.com/en-us/HT201263

  • My phone is asking to connect to itunes after i have given commond of reset settings

    my phone is asking to connect to itunes after i have given commond of reset settings so what i have to do.

    Are you unable to connect your phone to iTunes and restore? What happens when you try?

  • Can't connect to 3g after upgrading to ios 8

    I have an ipad and use Verizon for cellular data.  After upgrading to IOS 8 I can't connect to 3g.  The upper left hand corner of my ipad says "searching".  I have reset my network settings, turned off and on the ipad, and have had no success.  Any suggestions?

    Hey Gary1177,
    Thanks for the question. Based on what you stated, it seems like there is trouble with a cellular data connection. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
    Get help with the cellular data connection on your iPad (Wi-Fi + Cellular Model) - Apple Support
    Thanks for using Apple Support Communities.
    Cheers,
    Mario

  • I cannot connect to ITunes after updating to IOS 7.0.2,cannot update my apps nor download new apps. When I tap the quick test for IOS diagnostics it says it cannot verify the ticket number.

    After updating to IOS 7.0.2 in my Ipad mini I cannot update my apps nor download new apps . It says "cannot connect to ITunes. " it's been almost 3 wks now. I have tried resetting it  and trying other options like changing the DNS to just 8.8.8 etc but to no avail. I try to run the IOS diagnostics but it couldn't verify my ticket number. Everytime I open my mail it cannot identify server identity " Apple.imap.yahoo.com." But I just clicked "continue" anyway so I could get my mail.

    (A) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Reset all settings
    Settings>General>Reset>Reset all settings
    Note: Data will not be affected but settings will be reset.

  • No connection to Wifi after upgrade to iOS 7.1 AND poor battery life

    Hi,
    after upgrading my iPhone 4s to iOS to 7.1, I cannot connect to any Wifi anymore. Does anybody have an idea how to solve this issue?
    Additional, I am wondering why battery life is much worse after the upgrade. I closed all apps via multitasking view. Nevertheless, battery is empty within a couple of hours. (before the upgrade, it lasted approx one day!!!)
    Any help is highly appreciated!
    Thanks!

    After every iOS update there are reports of users experiencing faster than normal battery drain.  Most find that basic troubleshooting from the User's Guide resolves the issue.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). 
    I am not having issues with battery drain on my device, it was at 50% around 2PM today, removed off the charger at 6:30AM and I'm a fairly heavy user of the device.

  • Can't connect to WIFI after upgrading to IOS 6

    After upgrading to IOS6, my 4S stopped connecting any available wifi networks. It keep poping up "Unable to join the network "***" " when I tap any wifi spots I've been used so far. My problem is not like most people says. Instead of taking me the the apple website, mine doesn't even connected! This problem has been around for a week. I have to relay on 3G so far. I've tried resting the wifi setting, resting the iphone and even tried a lot of public wifi spots. It still doesn't work. Is it the problem of hardware? Help me, plz!

    The solution lies in the router password encryption. There is the option WPA2 instead of current WPA/WPA2 on my router. I changed the setting to just WPA2 and it worked now. But the former option worked on iOS5.1.1. Thanks!
    [Update]Turns out it is still unresolved. After the changing the encryption I restarted the router and it is still the luck I got before. The connection will not last long. Still unable to connect.

  • HT4199 Has anyone else had issues connecting to wireless after upgrading to IOS 6?

    I Upgraded to IOS 6 today on my iPhone and iPad and am now unable to connect to wireless. It keeps goin to a "page not found" on apple.com when I Gould either put a password in or be directed to the Internet. Help!?!?  My laptop works on my router so I know that's fine-especially since the ONLY change I made was the upgrade...

    Just got it working, Forget the Wireless and then re-add it...worked perfectly for me.

  • HT4623 iPhone 5S won't connect to iTunes after updating to IOS 7.1?

    I just updated my iPhone 5S to 7.1.  Since doing so I cannot connect to iTunes via my MacBook Pro. My iPhone just vibrates once plugged in and I get an error message in iTunes (eventually) stating that my iPhone can't connect. I back up to iTunes.  HELP

    1. change date and time to MANUAL
    2. set date one year ahead
    3. restart phone
    4. ignore all message you get on restart. go to setting for date and time, set to automatic
    5. close setting. sign on to itunes, you will need to enter your apple ID and password

  • Ipod Constantly asking to connect to itunes after Restore

    My Ipod Touch, 4th Gen, had a white screen, so following help on the forum I connected it to my Windows PC I went on itunes and Restored it. When I did, it went through the factory reset process and then... Black. The screen was black for 10 minutes after the apple loading screen went, so I unplugged it and nothing appeared on itunes. Going back to the ipod, I tried holding down all indvidual buttons with no success. Holding down the combinations, I just keeps going back to the usb pointing at  itunes.
    If you could help, that'd be great

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • I bought an ipad 2 from a foreigner. But the person had the Find my iphone turned on. Last week i left the ipad connected to itunes which upgraded the ios. Now it asks for apple ID which i don't have. So what can I do??

    No apple ID to activate. Previous owner's contact info isn't with me.

    If a second-hand iOS device has been 'Activation locked' then only the previous owner can unlock it, either by providing you with the account ID and password, or by removing it from his list of devices (as he should have done before selling it) - please see http://support.apple.com/kb/ts4515
    If you are unable to contact him to do this then I'm afraid you will not be able to use the device - there is no other way of unlocking it at all. Apple cannot unlock it for you.

  • My wifi connection is broken after upgrading to iOS 7.0.4, I'm using iPhone 4s. Anyone can suggest me some solution to fix this problem?

    I've updated my iPhone 4s to iOS 7.0.4 and my wifi connection is runied. I've tried restore the network connection and restoring my phone for many times. Other devices in my home can connect to my home wifi and I've no problem with iOS 7.0.3. Anyone can help me out?

    My phone has just done this for the second time, the first time it was in warranty and apple replaced it for free. It has now happened again and as the warranty is finished  I'm being told it will cost £115 to fix (replace again) I've given up and I'm now getting a new phone.

  • WiFi connection broke after upgrading to IOS 6.0

    My WiFi connection stopped working after upgrading to IOS 6.0 on bothe iPhone 4 and iPad 3.
    I reset the Network connection - no change.
    I selected "Forget Network" and tried to rejoin - no luck.

    You are not addressing Apple here. We are just users like yourself.
    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    iOS: How to back up your data and set up as a new device
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • HT4528 iPhone 4s' wifi doesn't work after upgrading to iOS 7

    My Verizon iPhone 4s will not connect to wifi after upgrading to iOS 7. You would think Apple would have figured this problem out before releasing iOS 7 to the public. Any fixes?

    After having trying everything out on the web, I found a fix that worked out. The thing to do is to deactivate your phone and then reactivate it. The way to do it is to first power off the phone. Then take out the SIM card. Then power on the phone and make an emergency call for about 5 sec. Turn the power off. Place the SIM card back into the phone. Power on the phone and plug it into the computer and to itune. Itune will then ask for your user name and password. The wifi will be working.
    All you have to do then, is reinstall your saved restored file.
    That's it !!

Maybe you are looking for

  • Is this a correct assumption about MacBooks?

    I've always seen MacBook Pro as being the better option. I've always thought that MacBook Pro has always been a year ahead of the MacBook Air . Is this a correct or incorrect belief? If so, or if not, why? Like if I were to buy a 2012 MacBook Pro, it

  • [SOLVED] LXDE menu disappeared after update

    After last update the menu entries in LXDE menu disappeared. There are only two entries, Logout  and Run Is there any way to restore the menu entries? Last edited by leonidas (2014-11-17 18:16:14)

  • LabVIEW 8.0, Crystal report - PDF

    Has anyone tried developing a crystal report, and calling it in LabVIEW 8.0 via .NET dll so it prints a pdf report similar to printing a standard report? Kudos always welcome for helpful posts

  • The connection parameters file could not be found

    Hi, I`m receiving the message "The connection parameters file could not be found" every time I try to access my local sybase data base from dbisqlc.exe. I work with Sebel 78 and I have entered as parameters my ID, my password and the path to the .dbf

  • Hyperion Brio: Computed Item Extract Number From String

    I would like to extract a number from a string in a computer item.  For example if I had a string such as "The customer purchased $5.00 of footballs", I would like to remove only the 5.00 from the string.  I would have to use the java functions in th