ASM disk disappeared after the db and system bounce

Hi
I have a grid control 11g setup. after a db and system bounce, the asm disks disappreared from the /dev/oracleasm/disks.
The querydisks shows nothing
but the OS disks are existing and labelled as ASM disks.
# asmtool -I -l "/dev/oracleasm" -n /dev/mapper/VolGroup00-LogVol07 -a label
asmtool: Disk "/dev/mapper/VolGroup00-LogVol07" is marked an ASM disk with the label "REDO"
# asmtool -I -l "/dev/oracleasm" -n /dev/mapper/VolGroup00-LogVol08 -a label
asmtool: Disk "/dev/mapper/VolGroup00-LogVol08" is marked an ASM disk with the label "DATA"
dd if=/dev/mapper/VolGroup00-LogVol07 of=/tmp/vol7.dd bs=1M count=100
100+0 records in
100+0 records out
104857600 bytes (105 MB) copied, 0.467996 seconds, 224 MB/s
can anybody help how to retrieve that without hurting the configuration please?

Thanks for the reply
That was not the problem. I got solution. The problem was the way RHEL5 search the disks. I had to comment the content of 90-dm.rules and a system bounce.
thanks
krishna kumar pc
Edited by: user12244962 on Oct 18, 2011 9:27 AM

Similar Messages

After a second a telefoon number disappear from the website and I cannot read it anymore?

# Question
after a second a telefoon number disappear from the website and I cannot read it anymore?
For instantance I am looking for a telefoonnumber I became the adress and number after one second the number disappears

Yes that's the question, The problem has been soved.
Thank you for your help

I'm facing a problem only for this account that whenever I purchase a ringtone after few hours it disappears from the sound and it happened with all the ringtones I purchased since 2 days. also when i visit the store from the same account to downlo

I'm facing a problem only for this account that whenever I purchase a ringtone after few hours it disappears from the sound and it happened with all the ringtones I purchased since 2 days. also when i visit the store from the same account to download the ringtones again i have to buy them again and again . Please try to fix this problem for me and refund my money back.

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
There are lots of other posts on this forum about ringtones. If you want to contact iTunes Support then you can either use the 'report a problem' page : http://reportaproblem.apple.com
Or you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I have a FreeAgent Goflex drive (for Mac) after a while the icon disappears from the desktop and can only be restored by reconnecting

I have a FreeAgent GoFlex backup drive (for Mac) after a while the icon disappears from the desktop and can only be restored by reconnecting the firewire. This also happens when I use the USB connection as well. Thanks

Did you use any of the "sleep" drivers supplied? I have found it best to just totally reformat/erase the drives and let the OS handle them.

Startup disk disappear from the desktop

Well, without any reason, The startup disk is disappear from the desktop.
(Just only the startup disk)
I found this 2 times before, once on my 8 cores Mac Pro, once on my iMac G5.
I couldn't do anything to fix them, so I formatted and re-install OS.
with my iMac, it ran Tiger before, there's no problem until I changed to Leopard,
After about 2 weeks under the new Leopard,then the startup disk disappear from the desktop,
it shown the hidden status in disk utility and could not mount it,
So I formatted and back to install old Tiger.
Everything's fine. that's really good Operating system.
Bad luck, about 2 months ago, My iMac G5 had some problem with motherboard and the harddisk also damaged, I send it to Apple Thailand, They fixed it and send back with installed Leopard inside my new hard disk.(well... again)
Now after a few weeks. it happen again.
Startup disk disappear from the desktop.
This problem never exist on my Mac Pro, just with the iMac G5.
(Please don't tell me to check the finder preference about the sidebar setting.
it's already set to show every items there even the iDisk)
I wondered why I don't see anyone have problem with this.
I'm really want to find the answer about this.
I asked this question to Apple Thailand's support team but they didn't have any idea.
Who's gonna answer this

I found a solution to the problem and posted it here:
http://discussions.apple.com/thread.jspa?threadID=1858340&stqc=true
I pasted the solution below:
from a Terminal window, type:
ls -lOd /
(That's lowercase ell, lowercase ess, space, minus, lowercase ell, capital oh, lowercase dee, space, forward slash)
You should get something like this:
hostname:~ username$ ls -lOd /
drwxrwxr-t 32 root admin - 1156 Feb 8 20:35 /
Sounds like you might see something like this instead:
hostname:~ username$ ls -lOd /
drwxrwxr-t@ 32 root admin hidden 1156 Feb 8 20:35 /
(note it says "hidden" instead of "-")
To fix this, type:
sudo chflags nohidden /
and provide your admin password. You won't get any output back from the command but the icon should now appear on your desktop, and the hidden flag should go away if you repeat the 'ls -lOd /' command.
And just in case you missed it above, you've got to be sure Hard disks are turned on in Finder General Preferences under "Show these items on the Desktop"

I'm having problems upgrading from 10.6.8 to Yosemite. My computer locks up after the download and installation process. Does anyone know how I can overcome this problem?

I'm having problems upgrading from 10.6.8 to Yosemite. My computer locks up after the download and installation process. Does anyone know how I can overcome this problem?

Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

How can you change the font size in the application and system headers?

How can you change the font size in the application and system headers? I searched the system and finder prefs to no avail. Changing the screen density is not a good option.
Thanks

I downloaded Tinkertool. Found the font section and increased the size of most selections. The only thing that changed that I can see is the window label. The apple line, bookmarks line, the tool bar in safari are all the same---font size of about 4. Found the finder "show view options" but that didn't seem to change anything either. I'll keep working. Restarted all apps after changes as well.

Pictures disappeared after installing Yosemite and new Iphoto. Why

Pictures disappeared after installing Yosemite and new Iphoto. Why ?

I also started having problems with iPhoto after installing Yosemite. Some of the Event collections lost the picture and just has a grey square in its place. When I click on the Event, it shows a white dotted lined square for each picture and if I click on the picture, it shows an exclamation mark.
Check, if you also are having a folder "Old Masters" inside the iPhoto Library package, as described by Muhamad Abdulkadir.
Ctrl-click (or right-click) your iPhoto Library in the Pictures folder , then select "Show Package Contents". If you are seeing a folder "Old Masters", copy this folder out of the library. Look inside - are the original image files of the problematic photos inside?
Are any photos in your "Masters"folder?

How can I make my Introduction_mc automatically disappear after 10 Seconds and load Home_mc?

Hi,
How can I make my Introduction_mc automatically disappear after 10 Seconds and load Home_mc (automatically)? I don't want user to change by himself this Introduction page. It should be done automatically.
What is the procedure and code to achieve it, please?
Thanks.

Hi,
I gues you are using AS2.0, then use setInterval, in AS3.0 user Timer Class.
AS2.0
var interval:Number = setInterval(doThis,10000);//in milliseconds
function doThis():Void{
//do something;
AS3.0
var timer:Timer = new Timer(10000, 1);
timer.addEventListener(TimerEvent.TIMER_COMPLETE, onTimerCompleteHandler, false, 0, true )
function onTimerCompleteHandler(event:TimerEvent):void{
//do something;
For details: http://blogs.adobe.com/pdehaan/2006/07/using_the_timer_class_in_actio.html
Warm Regards
Deepanjan Das
http://deepanjandas.wordpress.com

Just installed OSX Mavericks.Bluetooth disappeared from menu bar and system preferences. I have a magic mouse and my IMac no long recognizes it as such, nor can I scroll with it. What's wrong?

Just installed OSX Mavericks. Bluetooth disappeared from menu bar and system preferences panel. I use a Magic Mouse but my iMac no longer recognizes it as such, and I can no longer use it to scroll screen. What happened?

Since Mavricks installed: My Spotlight icon disappears from the menu bar, but the space stays there. If I click on the blank space where the
spotlight icon is supposed to be - the spotlight menu opens. So, for me, the icon is there, it works except that it is invisible at times. IF I do a re-start it is there. If I let the computer set, sleep or other wise stay on for days, the icon will hide and re-appear at random.

Is Lion going to be offered on a disk similar to the previous operating systems where you can get a family pack? of like 5 instals?

Is Lion going to be offered on a disk similar to the previous operating systems where you can get a family pack? of like 5 instals?

You don't even need the family pack anymore! Just use the same Apple ID to connect to the App Store on each computer and upgrade... pay for it once and you can use it multiple times. According to the Lion page on www.apple.com, this is intended, and...
According to the App Store OS X Lion 10.7 License Agreement Section 2 Paragraph B:
B. License from Mac App Store. If you obtained a license for the Apple Software from the Mac App Store, then subject to the terms and conditions of this License and as permitted by the Mac App Store Usage Rules set forth in the App Store Terms and Conditions (http://apple.com/legal/itunes/ww/) ("Usage Rules"), you are granted a limited, non-transferable, non-exclusive license:
( i ) to download, install, use and run for personal non-commercial use one (1) copy of the Apple Softward directly on EACH Apple-branded computer running Mac OS X Snow Leopard or OS X Snow Leopard Server ("Mac Computer") that you own or control;
et al.
This means that you can buy OS X Lion with your Apple ID, and any Mac you own (or have control over) that is legally defined by the license agreement can be connected by the same Apple ID and upgraded.
Cheers.

In iMovie 11, how can you cut/paste a clip that has subtitles and actually have the subtitles get cut/pasted. When I try, the subtitles disappear into the void and I have to do the subtitling all over again.

In iMovie 11, how can you cut/paste a clip that has subtitles and actually have the subtitles get cut/pasted. When I try, the subtitles disappear into the void and I have to do the subtitling all over again.

If you think this is a bug, you can report it here:
Apple - Mac OS X - Feedback

TS3212 Today, 01/23/2014, I tried updating iTunes, as I got a messsage that update was available. The update did not download correctly the message to uninstall iTunes and reinstall it. After the uninstall and reinstall I got an error message, please hel

Today, 01/23/2014, I tried updating iTunes, as I got a messsage that update was available. The update did not download correctly I got the message to uninstall iTunes and reinstall it. After the uninstall and reinstall I got an error message, that stated: The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program fo fix. then I got the message, iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 126) I have had iTunes since I purchased the iphone in 2012. I have only updated the product since then until today when I did the uninstall ans reinstall as stated in above directions. I am not sure what is different now. please help

I had this problem as well but found the soultion on another post from turingtest2 - it worked for me:
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or by right-clicking the downloaded installer and selectingRun as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

I just updated my Iphone 3G and now it won´t work anymore. It wouldn´t even boot. It was just working for 3 sek. after the installation and now it shut itself down. Any help, please?

I just updated my Iphone 3G and now it won´t work anymore. It wouldn´t even boot. It was just working for 3 sek. after the installation and now it shut itself down. Any help, please? Thankyou

I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.
You also said: "It also will not let me download any music onto it." What happens when you try to sync music to the iPod?

Some of my songs in iPad Mini with RD disappeared all the sudden and I need to redownload it again. Same thing happen to my iPod touch 5 too. What's wrong with it? Is it the iOS problem?

Some of my songs in iPad Mini with RD disappeared all the sudden and I need to redownload it again. Same thing happen to my iPod touch 5 too. What's wrong with it? Is it the iOS problem?

Delete the music in your iTunes library, then go to iTunes store, Quick Link, 'Purchased' to redownload again.

ASM disk disappeared after the db and system bounce

Similar Messages

Maybe you are looking for