Asmca hangs during grid installation on windows server 2008 r2 x64

Hi all,
searched the web, but did not found a solution to this right now.
The Grid Infrastructure installation (11.2.0.2) hangs every time i tried the installation (Basic, Advanced) on a two node configuration. Had the same issue with 11.2.0.1.
Environment:
- W2K8 Server EE x64, all patches installed
- FC Storage attached
- UAC disabled
- Firewall diabled
- Prereqs implemented as recommended by RAC Assurance Team
- Using Domain-User (Member of the local Administrator Group) for installation
- Public-IPs and SCAN-IPs in DNS has been configured
- GNS and IMPI not used
Used diskpart to create extended partition and logical partition as described in the manuals. Stamped GRID-disk using asmtoolg.
Whatever I tried, asmca seems to hang while creating the diskgroup for OCR/Voting ...
... maybe someone out there has an idea what may cause this?
Some logs that explain the problem:
cluvfy
C:\install\11.2.0.2\grid>runcluvfy.bat stage -pre crsinst -n BKO-dbqc01,BKO-dbqc
02 -verbose
Vorpr³fungen f³r Cluster-Services-Setup werden ausgef³hrt.
Knotenzugõnglichkeit wird gepr³ft...
Pr³fung: Knotenzugõnglichkeit von Knoten "BKO-dbqc01"
Zielknoten Zugõnglich?
BKO-dbqc02 ja
BKO-dbqc01 ja
Ergebnis: Pr³fung auf Knotenzugõnglichkeit von Knoten "BKO-dbqc01" erfolgreich
Benutzerõquivalenz wird ³berpr³ft...
Pr³fung: Benutzerõquivalenz f³r Benutzer "sup-bko-him"
Knotenname Kommentar
BKO-dbqc02 erfolgreich
BKO-dbqc01 erfolgreich
Ergebnis: Pr³fung auf Benutzerõquivalenz erfolgreich f³r Benutzer "sup-bko-him"
Knotenkonnektivitõt wird gepr³ft...
Schnittstelleninformationen f³r Knoten "BKO-dbqc02"
Name IP-Adresse Subnet Gateway Standard-Gateway HW-Adre
sse MTU
PublicLAN 10.0.145.35 10.0.144.0 On-link UNKNOWN D4:85
:64:C8:A3:FA 1500
PrivateLAN 192.168.123.4 192.168.123.0 On-link UNKNOWN D4:8
5:64:C8:A3:FE 1500
Schnittstelleninformationen f³r Knoten "BKO-dbqc01"
Name IP-Adresse Subnet Gateway Standard-Gateway HW-Adre
sse MTU
PublicLAN 10.0.145.32 10.0.144.0 On-link UNKNOWN D4:85
:64:C9:28:3E 1500
PrivateLAN 192.168.123.2 192.168.123.0 On-link UNKNOWN D4:8
5:64:C9:28:42 1500
Pr³fung: Knotenkonnektivitõt von Subnet "10.0.144.0"
Quelle Ziel Angemeldet?
BKO-dbqc02[10.0.145.35] BKO-dbqc01[10.0.145.32] ja
Ergebnis: Pr³fung auf Knotenkonnektivitõt f³r Subnet "10.0.144.0" mit Knoten BKO
-dbqc02,BKO-dbqc01 erfolgreich
Pr³fung: TCP-Konnektivitõt von Subnet "10.0.144.0"
Quelle Ziel Angemeldet?
BKO-dbqc01:10.0.145.32 BKO-dbqc02:10.0.145.35 erfolgreich
Ergebnis: Pr³fung der TCP-Konnektivitõt f³r Subnet "10.0.144.0" erfolgreich
Pr³fung: Knotenkonnektivitõt von Subnet "192.168.123.0"
Quelle Ziel Angemeldet?
BKO-dbqc02[192.168.123.4] BKO-dbqc01[192.168.123.2] ja
Ergebnis: Pr³fung auf Knotenkonnektivitõt f³r Subnet "192.168.123.0" mit Knoten
BKO-dbqc02,BKO-dbqc01 erfolgreich
Pr³fung: TCP-Konnektivitõt von Subnet "192.168.123.0"
Quelle Ziel Angemeldet?
BKO-dbqc01:192.168.123.2 BKO-dbqc02:192.168.123.4 erfolgreich
Ergebnis: Pr³fung der TCP-Konnektivitõt f³r Subnet "192.168.123.0" erfolgreich
Folgende Schnittstellen wurden auf Subnet "10.0.144.0" gefunden, die f³r ein Pri
vate Interconnect in Frage kommen:
BKO-dbqc02 PublicLAN:10.0.145.35
BKO-dbqc01 PublicLAN:10.0.145.32
Folgende Schnittstellen wurden auf Subnet "192.168.123.0" gefunden, die f³r ein
Private Interconnect in Frage kommen:
BKO-dbqc02 PrivateLAN:192.168.123.4
BKO-dbqc01 PrivateLAN:192.168.123.2
WARNING:
Es konnte keine geeignete Schnittstellengruppe f³r VIPs gefunden werden
Ergebnis: Pr³fung auf Knotenkonnektivitõt erfolgreich
Pr³fen: Gesamter Speicher
Knotenname Verf³gbar Erforderlich Kommentar
BKO-dbqc02 7,99GB (8378164.0KB) 922MB (944128.0KB) erfolgreich
BKO-dbqc01 7,99GB (8378164.0KB) 922MB (944128.0KB) erfolgreich
Ergebnis: Gesamter Speicher ▄berpr³fung erfolgreich
Pr³fen: Verf³gbarer Speicher
Knotenname Verf³gbar Erforderlich Kommentar
BKO-dbqc02 6,6797GB (7004176.0KB) 50MB (51200.0KB) erfolgreich
BKO-dbqc01 5,7739GB (6054412.0KB) 50MB (51200.0KB) erfolgreich
Ergebnis: Verf³gbarer Speicher ▄berpr³fung erfolgreich
Pr³fen: Swap-Bereich
Knotenname Verf³gbar Erforderlich Kommentar
BKO-dbqc02 15,9783GB (1.6754428E7KB) 7,99GB (8378164.0KB) erfolgreich
BKO-dbqc01 15,9783GB (1.6754428E7KB) 7,99GB (8378164.0KB) erfolgreich
Ergebnis: Swap-Bereich ▄berpr³fung erfolgreich
Pr³fen: Freier Datentrõgerspeicher f³r "BKO-dbqc02:C:\Windows\temp"
Pfad Knotenname Mount Point Verf³gbar Erforderlich Komm
entar
C:\Windows\temp BKO-dbqc02 C 105,3048GB 1GB erfo
lgreich
Ergebnis: Freier Datentrõgerspeicher ▄berpr³fung erfolgreich f³r "BKO-dbqc02:C:\
Windows\temp"
Pr³fen: Freier Datentrõgerspeicher f³r "BKO-dbqc01:C:\Windows\temp"
Pfad Knotenname Mount Point Verf³gbar Erforderlich Komm
entar
C:\Windows\temp BKO-dbqc01 C 91,5306GB 1GB erfo
lgreich
Ergebnis: Freier Datentrõgerspeicher ▄berpr³fung erfolgreich f³r "BKO-dbqc01:C:\
Windows\temp"
Pr³fen: Systemarchitektur
Knotenname Verf³gbar Erforderlich Kommentar
BKO-dbqc02 64-bit 64-bit erfolgreich
BKO-dbqc01 64-bit 64-bit erfolgreich
Ergebnis: Systemarchitektur ▄berpr³fung erfolgreich
Lõnge des Wertes der Umgebungsvariable "PATH" wird gepr³ft
Pr³fung: Lõnge des Wertes der Umgebungsvariable "PATH"
Knotenname Festgelegt? Maximale Lõnge Aktuelle Lõnge Kommentar
BKO-dbqc02 ja 1023 136 erfolgreich
BKO-dbqc01 ja 1023 189 erfolgreich
Ergebnis: Pr³fung auf Lõnge des Wertes der Umgebungsvariable "PATH" erfolgreich.
Pr³fung auf Media Sensing-Status von TCP/IP
Knotenname Aktiviert? Kommentar
BKO-dbqc02 nein erfolgreich
BKO-dbqc01 nein erfolgreich
Ergebnis: Pr³fung auf Media Sensing-Status von TCP/IP erfolgreich
Uhrensynchronisationspr³fungen mit dem Network Time Protocol (NTP) werden gestar
tet...
Es wird gepr³ft, ob Daemon aktiv ist...
Pr³fung: Aktiv f³r "W32Time"
Knotenname Wird ausgef³hrt?
BKO-dbqc02 ja
BKO-dbqc01 ja
Ergebnis: Aktivitõtspr³fung erfolgreich f³r "W32Time"
Pr³fung, ob der NTP-Daemon oder -Service aktiv ist, war auf allen Knoten erfolgr
eich
Ergebnis: Uhrensynchronisationspr³fung mit Network Time Protocol (NTP) erfolgrei
ch
Es wird gepr³ft, ob der aktuelle Benutzer ein Domain-Benutzer ist ...
Es wird gepr³ft, ob Benutzer "sup-bko-him" ein Domain-Benutzer ist
Ergebnis: Benutzer "sup-bko-him" ist Bestandteil der Domain "EUROPE"
Pr³fen: Zeitzonenkonsistenz
Ergebnis: Zeitzonenkonsistenz ▄berpr³fung erfolgreich
Pr³fung auf Status des Features zur automatischen Bereitstellung
Knotenname Aktiviert? Kommentar
BKO-dbqc02 ja erfolgreich
BKO-dbqc01 ja erfolgreich
Ergebnis: Pr³fung auf Status des Features zur automatischen Bereitstellung erfol
greich
Vorpr³fung f³r Cluster-Services-Setup war erfolgreich.
C:\install\11.2.0.2\grid>
* All tests were successful, sorry for the german :-) *
rootcrs log
... cutted ...
2010-12-22 21:21:01: Executing cmd: C:\grid\bin\crsctl check css
2010-12-22 21:21:01: Command output:
CRS-4529: Cluster Synchronization Services ist online
End Command output2010-12-22 21:21:01: CRS-2672: Versuch, "ora.mdnsd" auf "bko-dbqc01" zu starten
2010-12-22 21:21:01: CRS-2676: Starten von "ora.mdnsd" auf "bko-dbqc01" erfolgreich
2010-12-22 21:21:01: CRS-2672: Versuch, "ora.gpnpd" auf "bko-dbqc01" zu starten
2010-12-22 21:21:01: CRS-2676: Starten von "ora.gpnpd" auf "bko-dbqc01" erfolgreich
2010-12-22 21:21:01: CRS-2672: Versuch, "ora.cssdmonitor" auf "bko-dbqc01" zu starten
2010-12-22 21:21:01: CRS-2672: Versuch, "ora.gipcd" auf "bko-dbqc01" zu starten
2010-12-22 21:21:01: CRS-2676: Starten von "ora.gipcd" auf "bko-dbqc01" erfolgreich
2010-12-22 21:21:01: CRS-2676: Starten von "ora.cssdmonitor" auf "bko-dbqc01" erfolgreich
2010-12-22 21:21:01: CRS-2672: Versuch, "ora.cssd" auf "bko-dbqc01" zu starten
2010-12-22 21:21:01: CRS-2676: Starten von "ora.cssd" auf "bko-dbqc01" erfolgreich
2010-12-22 21:21:01: Querying for existing CSS voting disks
2010-12-22 21:21:01: Performing initial configuration for cluster
2010-12-22 21:21:01: Executing cmd: C:\grid\bin\crsctl start resource ora.ctssd -init
2010-12-22 21:21:04: Command output:
CRS-2672: Versuch, "ora.ctssd" auf "bko-dbqc01" zu starten
CRS-2676: Starten von "ora.ctssd" auf "bko-dbqc01" erfolgreich
End Command output2010-12-22 21:21:04: Start of resource "ora.ctssd" Succeeded
2010-12-22 21:21:04: Configuring ASM via ASMCA
2010-12-22 21:21:05: Executing as europe\sup-bko-him: C:\grid\bin\asmca -silent -diskGroupName GRID -diskList '\\.\ORCLDISKGRID0' -redundancy EXTERNAL -configureLocalASM
2010-12-22 21:21:05: Running as user europe\sup-bko-him: C:\grid\bin\asmca -silent -diskGroupName GRID -diskList '\\.\ORCLDISKGRID0' -redundancy EXTERNAL -configureLocalASM
2010-12-22 21:21:05: s_run_as_user: Running C:\grid\bin\asmca -silent -diskGroupName GRID -diskList '\\.\ORCLDISKGRID0' -redundancy EXTERNAL -configureLocalASM
2010-12-22 21:21:05: Executing C:\grid\bin\asmca -silent -diskGroupName GRID -diskList '\\.\ORCLDISKGRID0' -redundancy EXTERNAL -configureLocalASM
2010-12-22 21:21:05: Executing cmd: C:\grid\bin\asmca -silent -diskGroupName GRID -diskList '\\.\ORCLDISKGRID0' -redundancy EXTERNAL -configureLocalASM
*^^ hangs here*
asmca log:
... cutted ...
[Finalizer] [ 2010-12-22 21:21:15.070 CET ] [ClusterUtil.finalize:102] ClusterUtil: finalized called for oracle.ops.mgmt.has.ClusterUtil@68814013
[main] [ 2010-12-22 21:21:15.128 CET ] [OracleHome.getVersion:953] Current Version From Inventory: null
[main] [ 2010-12-22 21:21:15.129 CET ] [OracleHome.getVersion:960] using sqlplus: C:\grid\bin\sqlplus.exe
[main] [ 2010-12-22 21:21:15.174 CET ] [OracleHome.getVersion:1001] C:\grid\bin\sqlplus.exe Banner:
SQL*Plus: Release 11.2.0.2.0 Production
[main] [ 2010-12-22 21:21:15.174 CET ] [OracleHome.getVersion:1019] Current version from sqlplus: 11.2.0.2.0
[main] [ 2010-12-22 21:21:15.175 CET ] [OracleHome.getVersion:885] OracleHome.getVersion called. Current Version: 11.2.0.2.0
[main] [ 2010-12-22 21:21:15.175 CET ] [OracleHome.getVersion:953] Current Version From Inventory: 11.2.0.2.0
[main] [ 2010-12-22 21:21:15.175 CET ] [OracleHome.getVersion:885] OracleHome.getVersion called. Current Version: 11.2.0.2.0
[main] [ 2010-12-22 21:21:15.176 CET ] [OracleHome.getVersion:953] Current Version From Inventory: 11.2.0.2.0
[main] [ 2010-12-22 21:21:15.176 CET ] [SQLPlusEngine.getCmmdParams:222] m_home 11.2.0.2.0
[main] [ 2010-12-22 21:21:15.176 CET ] [SQLPlusEngine.getCmmdParams:223] version > 112 true
[main] [ 2010-12-22 21:21:15.177 CET ] [SQLEngine.getEnvParams:552] Default NLS_LANG: GERMAN_GERMANY.AL32UTF8
[main] [ 2010-12-22 21:21:15.177 CET ] [SQLEngine.getEnvParams:562] NLS_LANG: GERMAN_GERMANY.AL32UTF8
[main] [ 2010-12-22 21:21:15.178 CET ] [SQLEngine.initialize:322] Execing SQLPLUS/SVRMGR process...
[main] [ 2010-12-22 21:21:15.180 CET ] [SQLEngine.initialize:359] m_bReaderStarted: false
[main] [ 2010-12-22 21:21:15.180 CET ] [SQLEngine.initialize:363] Starting Reader Thread...
[main] [ 2010-12-22 21:21:15.226 CET ] [UsmcaLogger.logExit:123] Exiting oracle.sysman.assistants.usmca.backend.USMInstance Method : createSQLEngine
[main] [ 2010-12-22 21:21:15.227 CET ] [OracleHome.getVersion:885] OracleHome.getVersion called. Current Version: null
[main] [ 2010-12-22 21:21:15.229 CET ] [InventoryUtil.getOUIInvSession:347] setting OUI READ level to ACCESSLEVEL_READ_LOCKLESS
[main] [ 2010-12-22 21:21:15.229 CET ] [OracleHome.getVersion:904] Homeinfo C:\grid,1
[main] [ 2010-12-22 21:21:15.318 CET ] [OracleHome.getVersion:953] Current Version From Inventory: null
[main] [ 2010-12-22 21:21:15.318 CET ] [OracleHome.getVersion:960] using sqlplus: C:\grid\bin\sqlplus.exe
[main] [ 2010-12-22 21:21:15.369 CET ] [OracleHome.getVersion:1001] C:\grid\bin\sqlplus.exe Banner:
SQL*Plus: Release 11.2.0.2.0 Production
[main] [ 2010-12-22 21:21:15.369 CET ] [OracleHome.getVersion:1019] Current version from sqlplus: 11.2.0.2.0
[main] [ 2010-12-22 21:21:15.370 CET ] [UsmcaLogger.logInfo:142] Role SYSASM
[main] [ 2010-12-22 21:21:15.370 CET ] [UsmcaLogger.logInfo:142] OS Auth true
[main] [ 2010-12-22 21:21:15.777 CET ] [SQLEngine.done:2167] Done called
[main] [ 2010-12-22 21:21:15.778 CET ] [UsmcaLogger.logException:172] SEVERE:method oracle.sysman.assistants.usmca.backend.USMInstance:configureLocalASM
[main] [ 2010-12-22 21:21:15.778 CET ] [UsmcaLogger.logException:173] ORA-01034: ORACLE not available
[main] [ 2010-12-22 21:21:15.779 CET ] [UsmcaLogger.logException:174] oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-01034: ORACLE not available
oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1655)
oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeQuery(SQLEngine.java:828)
oracle.sysman.assistants.usmca.backend.USMInstance.configureLocalASM(USMInstance.java:3003)
oracle.sysman.assistants.usmca.service.UsmcaService.configureLocalASM(UsmcaService.java:1049)
oracle.sysman.assistants.usmca.model.UsmcaModel.performConfigureLocalASM(UsmcaModel.java:926)
oracle.sysman.assistants.usmca.model.UsmcaModel.performOperation(UsmcaModel.java:779)
oracle.sysman.assistants.usmca.Usmca.execute(Usmca.java:174)
oracle.sysman.assistants.usmca.Usmca.main(Usmca.java:369)
[main] [ 2010-12-22 21:21:15.779 CET ] [UsmcaLogger.logEntry:114] Entering oracle.sysman.assistants.usmca.backend.USMInstance Method : createSQLEngine
[main] [ 2010-12-22 21:21:15.779 CET ] [SQLEngine.done:2167] Done called
[main] [ 2010-12-22 21:21:15.780 CET ] [OracleHome.getVersion:885] OracleHome.getVersion called. Current Version: null
[main] [ 2010-12-22 21:21:15.782 CET ] [InventoryUtil.getOUIInvSession:347] setting OUI READ level to ACCESSLEVEL_READ_LOCKLESS
[main] [ 2010-12-22 21:21:15.783 CET ] [OracleHome.getVersion:904] Homeinfo C:\grid,1
[main] [ 2010-12-22 21:21:15.874 CET ] [OracleHome.getVersion:953] Current Version From Inventory: null
[main] [ 2010-12-22 21:21:15.874 CET ] [OracleHome.getVersion:960] using sqlplus: C:\grid\bin\sqlplus.exe
[main] [ 2010-12-22 21:21:15.926 CET ] [OracleHome.getVersion:1001] C:\grid\bin\sqlplus.exe Banner:
SQL*Plus: Release 11.2.0.2.0 Production
[main] [ 2010-12-22 21:21:15.926 CET ] [OracleHome.getVersion:1019] Current version from sqlplus: 11.2.0.2.0
[main] [ 2010-12-22 21:21:15.926 CET ] [OracleHome.getVersion:885] OracleHome.getVersion called. Current Version: 11.2.0.2.0
[main] [ 2010-12-22 21:21:15.927 CET ] [OracleHome.getVersion:953] Current Version From Inventory: 11.2.0.2.0
[main] [ 2010-12-22 21:21:15.927 CET ] [OracleHome.getVersion:885] OracleHome.getVersion called. Current Version: 11.2.0.2.0
[main] [ 2010-12-22 21:21:15.927 CET ] [OracleHome.getVersion:953] Current Version From Inventory: 11.2.0.2.0
[main] [ 2010-12-22 21:21:15.928 CET ] [SQLPlusEngine.getCmmdParams:222] m_home 11.2.0.2.0
[main] [ 2010-12-22 21:21:15.928 CET ] [SQLPlusEngine.getCmmdParams:223] version > 112 true
[main] [ 2010-12-22 21:21:15.928 CET ] [SQLEngine.getEnvParams:552] Default NLS_LANG: GERMAN_GERMANY.AL32UTF8
[main] [ 2010-12-22 21:21:15.929 CET ] [SQLEngine.getEnvParams:562] NLS_LANG: GERMAN_GERMANY.AL32UTF8
[main] [ 2010-12-22 21:21:15.929 CET ] [SQLEngine.initialize:322] Execing SQLPLUS/SVRMGR process...
[main] [ 2010-12-22 21:21:15.931 CET ] [SQLEngine.initialize:359] m_bReaderStarted: false
[main] [ 2010-12-22 21:21:15.932 CET ] [SQLEngine.initialize:363] Starting Reader Thread...
[main] [ 2010-12-22 21:21:15.982 CET ] [UsmcaLogger.logExit:123] Exiting oracle.sysman.assistants.usmca.backend.USMInstance Method : createSQLEngine
[main] [ 2010-12-22 21:21:15.983 CET ] [OracleHome.getVersion:885] OracleHome.getVersion called. Current Version: null
[main] [ 2010-12-22 21:21:15.985 CET ] [InventoryUtil.getOUIInvSession:347] setting OUI READ level to ACCESSLEVEL_READ_LOCKLESS
[main] [ 2010-12-22 21:21:15.986 CET ] [OracleHome.getVersion:904] Homeinfo C:\grid,1
[main] [ 2010-12-22 21:21:16.079 CET ] [OracleHome.getVersion:953] Current Version From Inventory: null
[main] [ 2010-12-22 21:21:16.079 CET ] [OracleHome.getVersion:960] using sqlplus: C:\grid\bin\sqlplus.exe
[main] [ 2010-12-22 21:21:16.132 CET ] [OracleHome.getVersion:1001] C:\grid\bin\sqlplus.exe Banner:
SQL*Plus: Release 11.2.0.2.0 Production
[main] [ 2010-12-22 21:21:16.133 CET ] [OracleHome.getVersion:1019] Current version from sqlplus: 11.2.0.2.0
[main] [ 2010-12-22 21:21:16.133 CET ] [UsmcaLogger.logInfo:142] Role SYSASM
[main] [ 2010-12-22 21:21:16.133 CET ] [UsmcaLogger.logInfo:142] OS Auth true
*^^no further entries here, so hangs, too*

hmm, it is getting more misterious:
if i enable DTrace on the asmca-commandline (-DTRACING.ENABLED=true -DTRACING.LEVEL=2), asmca works ...

Similar Messages

  • 64 bit Weblogic Server 10.3.2 installation on Windows Server 2008 R2 x64 ?

    Hi,
    I'm trying to install 64 bit version of Weblogic Server 10.3.2 on my 64 bit OS Windows Server 2008 R2 SP2.
    Firstly I downloaded "jdk-6u24-windows-x64.exe" and installed it on my 64 bit platform.
    I downloaded "wls1032_generic.jar" and try to install it by the command below
    "java -d64 -jar wls1032_generic.jar"
    however I got the message below
    Unrecognized option: -d64
    Couldn't create the Java virtual machine
    Any options about this problem. Where am I making mistake?

    Hi,
    You need to make sure the following things :
    1). If you want to run your WLS on W 64 bit mode then You need to use Generic Jar installer Example: *"java -jar wls1032_generic.jar"*
    2). The above Jar should be installed only using a 64 Bit JVM so that all the 64 bit libraries will be available with the WebLogic while installing it. So first of all Download a 64 Bit JVM in your Woindows box.
    Then just run the following command to check if the JVM is 6t4 bit or not:
    set JAVA=HOME=C:\My64BitJDK\jdk1.6.0_21
    *$JAVA_HOME\bin\java -version*
    3). Now u can run your WebLogic Installer like following:
    *$JAVA_HOME\bin\java -jar wls1032_generic.jar*

  • Oralce EPM Fails to install Weblogic on Windows Server 2008 R2 x64

    I've run the installer on Windows Server 2008 R2 x64 and it fails to install Weblogic. I don't have MIDDLEWARE_HOME/oracle_common. Config tool log says missing jars. When I go back to install and choose products individually, Weblogic Server is gray. When I click on Weblogic Server, the message at the bottom says can not be installed.
    I have checked that I have extracted the following assemblies:
    Oracle Hyperion Enterprise Performance Management System Installer, Fusion Edition Release 11.1.2.0.0
    Hyperion Enterprise Performance Management System Foundation Services Release 11.1.2.0.0 - Parts 1 - 4
    Oracle Hyperion Enterprise Performance Management System Additional Content Release 11.1.2.0.0
    I have run this same set of files on another server and Weblogic was installed. Am I missing something?

    I am not sure if it is your problem but I don't think R2 is officially supported, I did have problems with it when I first installed 11.1.2 so I installed with R1 SP2.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • ERROR Installing SAP NetWeaver PI 7.1 EHP 1 on Windows Server 2008 R2 x64

    Hi!
    I'm trying to install SAP NWPI 7.1 on a Windows Server 2008 R2 Standard, but in the step "Create Java User" stop the process when this creating the SAPJSF user, here's my system specifications:
    OS: Windows Server 2008 R2 x64 Standard
    RAM: 2 GB
    Free Space: 100 GB
    Virtual Memory: 16384 MB
    Environment Variables:
    CPIC_MAX_CONV = 200
    JAVA_HOME = JDK 1.5 64 Bits
    On running phase: Create Java Users, the installation stops when try to create the SAPJSF user, here's the output log:
    ERROR      2010-06-16 12:18:28.968 [sixxcstepexecute.cpp:984]
    FCO-00011  The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|6|0|createJSF was executed with status ERROR ( Last error reported by the step :. DIAGNOSIS: For more details see output of log file:).
    INFO 2010-06-16 12:17:57.968
    Output of C:\usr\sap\SPI\DVEBMGS00\exe\jstart.exe UserCheck.jstart -c ashost=CUNDISRV143 -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -alias SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION -user_type system -message_file UserCheck.message is written to the logfile C:/Program Files/sapinst_instdir/NW71/INSTALL/SYSTEM/ADA/STD/AS/UserCheck.log.
    WARNING 2010-06-16 12:18:28.593
    Execution of the command "C:\usr\sap\SPI\DVEBMGS00\exe\jstart.exe UserCheck.jstart -c ashost=CUNDISRV143 -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -alias SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION -user_type system -message_file UserCheck.message"; finished with return code 8. Output:
    INFO 2010-06-16 12:18:28.609
    Removed file C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ADA\STD\AS\dev_UserCheck.
    ERROR 2010-06-16 12:18:28.640
    CJS-30197  . DIAGNOSIS: For more details see output of log file:
    ERROR 2010-06-16 12:18:28.968
    FCO-00011  The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|6|0|createJSF was executed with status ERROR ( Last error reported by the step :. DIAGNOSIS: For more details see output of log file:).
    WARNING 2010-06-16 12:18:29.125
    Could not get property IDs of the JavaScript object.
    ERROR 2010-06-16 12:18:29.125
    FJS-00010  Could not get value for property
    Best Regards,
    David

    Hi All,
      As per the latest available sapinst and the kernel DVS's the system does not come up in the Java stack/Dual stack. Fails at the stage Starting the Java stack/SAPJSF creation stage. This is due to the kernel issue as the latest kernel is not bundled as a part of the DVD.
    You are opt for 2 options
    1. Stop the installation and the Bring down the system via MMC/cmd. backup the kernel and upgrade the Kernel with the latest Kernel available in the market place and then start the SAPINST. This would go ahead fine and the system would come up.
    This is valid for the Dual stack and Java only system. In As ABAP the system get installed but the system would give dumps as soon as we log in so the Kernel upgrade needs to be done to proceed with the rest of the post steps.
    2. Follow the snote: Note 1480785 - Creating a Modified Windows Kernel DVD for not getting bothered with these errors while installations.
    Hope this helps -- Further more SAP would be coming out with the new DVD's/Support for Windows 2008 R2 pretty soon.
    Thanks,
    Lijin Xavier

  • Issues installing 10g2 on windows server 2008 R2 x64

    I'm trying to install 10g2 on a windows sever 2008 box.
    Oracle Version: Oracle 10g2 (10204_vista_w2k8_x64_production_db) - found on the page that claims to support server 2008 x64.
    Windows Version: Windows Server 2008 R2 Standard (6.1).
    After extracting the installer that was supposed to work on server 2008, I get this:
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be 5.0, 5.1, 5.2 or 6.0 . Actual 6.1 Failed <<<<
    Exiting Oracle Universal Installer, log for this session can be found at C:\Program Files (x86)\Oracle\Inventory\logs\installActions2009-12-23_12-34-55PM.log
    Please press Enter to exit...
    Am I missing something here? From the oracle download page (http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10204_winx64_vista_win2k8.html), it claims this is a supported OS (also included in the title!).

    Hi;
    It seems, Windows 2008 R2 is not certified yet
    Please check below and see its helpful for you
    Oracle 10g Installation on Windows Server 2008 RC2
    windows server 2008 Oracle 10G 64 bit
    Regard
    Helios

  • Windows Server 2008 R2 x64 - Windows Update Errors...

    Hello,
    I've a windows 2008 R2 Enterprise SP1 server that I've applied Windows updates to this evening. A large number were successful, however there are 13 that will not install and keep on failing. I've run sfc/scannow which found and repaired some
    errors - restarted server - no difference.
    Please see windowsupdate.log output below (apologies for the length). I've tried installing individual updates from the 13 but it makes no difference and the errors are just the same. It seems to be the same error for each update although unfortunately doesn't
    mean much to me. Any assistance would be greatly appreciated.
    Thanks gents.
    2014-05-13 20:45:13:189  900 f84 AU AU received approval from Ux for 13 updates
    2014-05-13 20:45:13:189  900 f84 AU AU setting pending client directive to 'Progress Ux'
    2014-05-13 20:45:13:219  900 126c AU BeginInteractiveInstall invoked for Download
    2014-05-13 20:45:13:219  900 126c AU Auto-approving update for download, updateId = {1B127611-D28E-4167-A1DC-243A51BC528F}.203, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
    2014-05-13 20:45:13:219  900 126c AU Auto-approving update for download, updateId = {C750962E-9D5E-45CE-9967-AE2D67115966}.202, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
    2014-05-13 20:45:13:219  900 126c AU Auto-approving update for download, updateId = {332AA342-7AC4-4FB4-9C27-C2C9F4EAE6C0}.201, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
    2014-05-13 20:45:13:219  900 126c AU Auto-approving update for download, updateId = {3732354D-3DAE-4E71-B82C-61A12C300F72}.201, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
    2014-05-13 20:45:13:219  900 126c AU Auto-approving update for download, updateId = {A0689F68-807A-4D39-8112-8F931F8D0D85}.202, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
    2014-05-13 20:45:13:220  900 126c AU Auto-approving update for download, updateId = {88126772-A2FD-490A-8C84-787E94DAFE65}.201, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
    2014-05-13 20:45:13:220  900 126c AU Auto-approving update for download, updateId = {DFAA6388-FE05-49D7-A410-71B92D1C1B37}.202, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
    2014-05-13 20:45:13:220  900 126c AU Auto-approving update for download, updateId = {E2186FA0-D10C-4E1D-9619-A4FEB1ECF00B}.201, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
    2014-05-13 20:45:13:220  900 126c AU Auto-approving update for download, updateId = {FA04F2A3-4DB5-4903-A08C-ADDFCF93EE28}.201, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
    2014-05-13 20:45:13:220  900 126c AU Auto-approving update for download, updateId = {7E8ACCAD-2892-4F2D-9549-1FF8BE44AAD1}.203, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
    2014-05-13 20:45:13:220  900 126c AU Auto-approving update for download, updateId = {99C920B7-65AB-4ACD-A4AD-C4F522E4D7A9}.201, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
    2014-05-13 20:45:13:220  900 126c AU Auto-approving update for download, updateId = {EDE986B7-03CE-4B0C-8891-AF09113CB0DB}.200, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
    2014-05-13 20:45:13:220  900 126c AU Auto-approving update for download, updateId = {338B46CC-C71E-4294-A9D3-DF943FFEF642}.201, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
    2014-05-13 20:45:13:220  900 126c AU Auto-approved 13 update(s) for download (for Ux)
    2014-05-13 20:45:13:220  900 126c AU UpdateDownloadProperties: 0 download(s) are still in progress.
    2014-05-13 20:45:13:220  900 126c AU #############
    2014-05-13 20:45:13:220  900 126c AU ## START ##  AU: Download updates
    2014-05-13 20:45:13:220  900 126c AU #########
    2014-05-13 20:45:13:220  900 126c AU   # Approved updates = 13
    2014-05-13 20:45:13:222  900 126c AU AU initiated download, updateId = {1B127611-D28E-4167-A1DC-243A51BC528F}.203, callId = {AE497400-C1FA-434C-96A2-442420AD7155}
    2014-05-13 20:45:13:225  900 1384 DnldMgr *************
    2014-05-13 20:45:13:225  900 126c AU AU initiated download, updateId = {C750962E-9D5E-45CE-9967-AE2D67115966}.202, callId = {10C2CAD4-1000-4CFF-B414-F762841CC51D}
    2014-05-13 20:45:13:225  900 1384 DnldMgr ** START **  DnldMgr: Downloading updates [CallerId = AutomaticUpdatesWuApp]
    2014-05-13 20:45:13:225  900 1384 DnldMgr *********
    2014-05-13 20:45:13:226  900 1384 DnldMgr   * Call ID = {AE497400-C1FA-434C-96A2-442420AD7155}
    2014-05-13 20:45:13:226  900 1384 DnldMgr   * Priority = 3, Interactive = 1, Owner is system = 1, Explicit proxy = 0, Proxy session id = 2, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}
    2014-05-13 20:45:13:226  900 1384 DnldMgr   * Updates to download = 1
    2014-05-13 20:45:13:226  900 1384 Agent   *   Title = Security Update for Windows Server 2008 R2 x64 Edition (KB2868626)
    2014-05-13 20:45:13:226  900 1384 Agent   *   UpdateId = {1B127611-D28E-4167-A1DC-243A51BC528F}.203
    2014-05-13 20:45:13:226  900 1384 Agent   *     Bundles 1 updates:
    2014-05-13 20:45:13:226  900 1384 Agent   *       {7E051B49-3C92-45B0-9138-97BEDCE52225}.201
    2014-05-13 20:45:13:229  900 1384 DnldMgr ***********  DnldMgr: New download job [UpdateId = {7E051B49-3C92-45B0-9138-97BEDCE52225}.201]  ***********
    2014-05-13 20:45:13:229  900 1384 DnldMgr   * Queueing update for download handler request generation.
    2014-05-13 20:45:13:229  900 1384 DnldMgr Generating download request for update {7E051B49-3C92-45B0-9138-97BEDCE52225}.201
    2014-05-13 20:45:13:239  900 1384 Handler Generating request for CBS update 7E051B49-3C92-45B0-9138-97BEDCE52225 in sandbox C:\Windows\SoftwareDistribution\Download\b29165aeaa9b7c6358a11fe608ad59db
    2014-05-13 20:45:13:239  900 1384 Handler Selected payload type is ptExpress
    2014-05-13 20:45:13:240  900 126c AU AU initiated download, updateId = {332AA342-7AC4-4FB4-9C27-C2C9F4EAE6C0}.201, callId = {C6D9C785-32FE-4AD7-9DEB-C7105A3C1262}
    2014-05-13 20:45:13:240  900 1384 Handler UH: DpxRestoreJob returned 0x80070002
    2014-05-13 20:45:13:240  900 1384 Handler Detected download state is dsHavePackage
    2014-05-13 20:45:13:243  900 126c AU AU initiated download, updateId = {3732354D-3DAE-4E71-B82C-61A12C300F72}.201, callId = {F055F0F1-9AE5-433A-A2BD-03D142912DA1}
    2014-05-13 20:45:13:247  900 126c AU AU initiated download, updateId = {A0689F68-807A-4D39-8112-8F931F8D0D85}.202, callId = {326F2698-90E8-421E-B5B1-2A64797E7842}
    2014-05-13 20:45:13:250  900 126c AU AU initiated download, updateId = {88126772-A2FD-490A-8C84-787E94DAFE65}.201, callId = {065E2D23-EF67-47E1-8C87-440BD7137483}
    2014-05-13 20:45:13:253  900 126c AU AU initiated download, updateId = {DFAA6388-FE05-49D7-A410-71B92D1C1B37}.202, callId = {606C3C01-D996-4932-A142-30A8B192F2C0}
    2014-05-13 20:45:13:256  900 126c AU AU initiated download, updateId = {E2186FA0-D10C-4E1D-9619-A4FEB1ECF00B}.201, callId = {4805FBCE-4AB1-4751-A8AE-0847B69EA142}
    2014-05-13 20:45:13:259  900 126c AU AU initiated download, updateId = {FA04F2A3-4DB5-4903-A08C-ADDFCF93EE28}.201, callId = {04DDA2A9-B6C8-47F0-BE70-B0F50D7A6BA2}
    2014-05-13 20:45:13:262  900 126c AU AU initiated download, updateId = {7E8ACCAD-2892-4F2D-9549-1FF8BE44AAD1}.203, callId = {E0241A77-09F1-4498-97A6-DDD57483954E}
    2014-05-13 20:45:13:266  900 126c AU AU initiated download, updateId = {99C920B7-65AB-4ACD-A4AD-C4F522E4D7A9}.201, callId = {52A53948-0632-4E15-A14A-841FB5C95F61}
    2014-05-13 20:45:13:269  900 126c AU AU initiated download, updateId = {EDE986B7-03CE-4B0C-8891-AF09113CB0DB}.200, callId = {AB354496-CB3D-4A07-9F3C-1069C43C61E1}
    2014-05-13 20:45:13:272  900 126c AU AU initiated download, updateId = {338B46CC-C71E-4294-A9D3-DF943FFEF642}.201, callId = {E7AB48E8-5603-48BD-A051-1CCA7DFF4652}
    2014-05-13 20:45:13:272  900 126c AU   # Pending download calls = 13
    2014-05-13 20:45:13:272  900 126c AU <<## SUBMITTED ## AU: Download updates
    2014-05-13 20:45:13:279  900 f84 AU Getting featured update notifications.  fIncludeDismissed = true
    2014-05-13 20:45:13:279  900 f84 AU No featured updates available.
    2014-05-13 20:45:17:040  900 f84 Handler FATAL: CBS called Error with 0x80073712,
    2014-05-13 20:45:17:041  900 1384 Handler FATAL: UH: 0x80073712: Async stage operation failed in CUHCbsHandler::StageCbsPackage
    2014-05-13 20:45:17:056  900 1384 Handler FATAL: Request generation for CBS update complete with hr=0x80073712 and pfResetSandbox=0
    2014-05-13 20:45:17:056  900 1384 Handler FATAL: Error source is 106.
    2014-05-13 20:45:17:056  900 1384 DnldMgr FATAL: DM:CAgentDownloadManager::GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x80073712.
    2014-05-13 20:45:17:056  900 1384 DnldMgr Error 0x80073712 occurred while downloading update; notifying dependent calls.
    2014-05-13 20:45:17:254  900 1384 Agent *********
    2014-05-13 20:45:17:254  900 12d0 AU >>##  RESUMED  ## AU: Download update [UpdateId = {1B127611-D28E-4167-A1DC-243A51BC528F}]
    2014-05-13 20:45:17:254  900 1384 Agent **  END  **  Agent: Downloading updates [CallerId = AutomaticUpdatesWuApp]
    2014-05-13 20:45:17:254  900 12d0 AU   # WARNING: Download failed, error = 0x80073712
    2014-05-13 20:45:17:254  900 1384 Agent *************
    2014-05-13 20:45:17:259  900 1384 DnldMgr *************
    2014-05-13 20:45:17:259  900 1384 DnldMgr ** START **  DnldMgr: Downloading updates [CallerId = AutomaticUpdatesWuApp]
    2014-05-13 20:45:17:259  900 1384 DnldMgr *********
    2014-05-13 20:45:17:259  900 1384 DnldMgr   * Call ID = {10C2CAD4-1000-4CFF-B414-F762841CC51D}
    2014-05-13 20:45:17:259  900 1384 DnldMgr   * Priority = 3, Interactive = 1, Owner is system = 1, Explicit proxy = 0, Proxy session id = 2, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}
    2014-05-13 20:45:17:259  900 1384 DnldMgr   * Updates to download = 1
    2014-05-13 20:45:17:259  900 1384 Agent   *   Title = Security Update for Windows Server 2008 R2 x64 Edition (KB2872339)
    2014-05-13 20:45:17:259  900 1384 Agent   *   UpdateId = {C750962E-9D5E-45CE-9967-AE2D67115966}.202
    2014-05-13 20:45:17:259  900 1384 Agent   *     Bundles 2 updates:
    2014-05-13 20:45:17:259  900 1384 Agent   *       {45AFABD9-B938-457D-95EA-A32C2FA19D37}.202
    2014-05-13 20:45:17:259  900 1384 Agent   *       {1E81D165-A493-4813-8526-04D8F35C37D8}.202
    2014-05-13 20:45:17:262  900 1384 DnldMgr ***********  DnldMgr: New download job [UpdateId = {45AFABD9-B938-457D-95EA-A32C2FA19D37}.202]  ***********
    2014-05-13 20:45:17:263  900 1384 DnldMgr   * All files for update were already downloaded and are valid.
    2014-05-13 20:45:17:263  900 1384 DnldMgr ***********  DnldMgr: New download job [UpdateId = {1E81D165-A493-4813-8526-04D8F35C37D8}.202]  ***********
    2014-05-13 20:45:17:263  900 1384 DnldMgr   * Queueing update for download handler request generation.
    2014-05-13 20:45:17:263  900 1384 DnldMgr Generating download request for update {1E81D165-A493-4813-8526-04D8F35C37D8}.202
    2014-05-13 20:45:17:269  900 1384 Handler Generating request for CBS update 1E81D165-A493-4813-8526-04D8F35C37D8 in sandbox C:\Windows\SoftwareDistribution\Download\371b4bee540898fe91c5fa6958cf73cc
    2014-05-13 20:45:17:270  900 1384 Handler Selected payload type is ptExpress
    2014-05-13 20:45:17:271  900 1384 Handler UH: DpxRestoreJob returned 0x80070002
    2014-05-13 20:45:17:271  900 1384 Handler Detected download state is dsHavePackage
    2014-05-13 20:45:18:265  900 f84 Handler FATAL: CBS called Error with 0x80073712,
    2014-05-13 20:45:18:266  900 1384 Handler FATAL: UH: 0x80073712: Async stage operation failed in CUHCbsHandler::StageCbsPackage
    2014-05-13 20:45:18:267  900 1384 Handler FATAL: Request generation for CBS update complete with hr=0x80073712 and pfResetSandbox=0
    2014-05-13 20:45:18:267  900 1384 Handler FATAL: Error source is 106.
    2014-05-13 20:45:18:267  900 1384 DnldMgr FATAL: DM:CAgentDownloadManager::GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x80073712.
    2014-05-13 20:45:18:267  900 1384 DnldMgr Error 0x80073712 occurred while downloading update; notifying dependent calls.
    2014-05-13 20:45:18:307  900 1384 Agent *********
    2014-05-13 20:45:18:307  900 12d0 AU >>##  RESUMED  ## AU: Download update [UpdateId = {C750962E-9D5E-45CE-9967-AE2D67115966}]
    2014-05-13 20:45:18:307  900 1384 Agent **  END  **  Agent: Downloading updates [CallerId = AutomaticUpdatesWuApp]
    2014-05-13 20:45:18:307  900 12d0 AU   # WARNING: Download failed, error = 0x80073712
    2014-05-13 20:45:18:307  900 1384 Agent *************
    2014-05-13 20:45:18:310  900 1384 DnldMgr *************
    2014-05-13 20:45:18:310  900 1384 DnldMgr ** START **  DnldMgr: Downloading updates [CallerId = AutomaticUpdatesWuApp]
    2014-05-13 20:45:18:310  900 1384 DnldMgr *********
    2014-05-13 20:45:18:310  900 1384 DnldMgr   * Call ID = {C6D9C785-32FE-4AD7-9DEB-C7105A3C1262}
    2014-05-13 20:45:18:310  900 1384 DnldMgr   * Priority = 3, Interactive = 1, Owner is system = 1, Explicit proxy = 0, Proxy session id = 2, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}
    2014-05-13 20:45:18:310  900 1384 DnldMgr   * Updates to download = 1
    2014-05-13 20:45:18:310  900 1384 Agent   *   Title = Security Update for Windows Server 2008 R2 x64 Edition (KB2839894)
    2014-05-13 20:45:18:310  900 1384 Agent   *   UpdateId = {332AA342-7AC4-4FB4-9C27-C2C9F4EAE6C0}.201
    2014-05-13 20:45:18:310  900 1384 Agent   *     Bundles 1 updates:
    2014-05-13 20:45:18:310  900 1384 Agent   *       {B4DB0FFF-81FE-4D1D-BF01-D59B829303FC}.201
    2014-05-13 20:45:18:314  900 1384 DnldMgr ***********  DnldMgr: New download job [UpdateId = {B4DB0FFF-81FE-4D1D-BF01-D59B829303FC}.201]  ***********
    2014-05-13 20:45:18:314  900 1384 DnldMgr   * Queueing update for download handler request generation.
    2014-05-13 20:45:18:314  900 1384 DnldMgr Generating download request for update {B4DB0FFF-81FE-4D1D-BF01-D59B829303FC}.201
    2014-05-13 20:45:18:321  900 1384 Handler Generating request for CBS update B4DB0FFF-81FE-4D1D-BF01-D59B829303FC in sandbox C:\Windows\SoftwareDistribution\Download\7d02b28581a54bc209cde32aa0661586
    2014-05-13 20:45:18:321  900 1384 Handler Selected payload type is ptExpress
    2014-05-13 20:45:18:322  900 1384 Handler UH: DpxRestoreJob returned 0x80070002
    2014-05-13 20:45:18:322  900 1384 Handler Detected download state is dsHavePackage
    2014-05-13 20:45:18:655  900 f84 Handler FATAL: CBS called Error with 0x80073712,
    2014-05-13 20:45:18:655  900 1384 Handler FATAL: UH: 0x80073712: Async stage operation failed in CUHCbsHandler::StageCbsPackage
    2014-05-13 20:45:18:656  900 1384 Handler FATAL: Request generation for CBS update complete with hr=0x80073712 and pfResetSandbox=0
    2014-05-13 20:45:18:656  900 1384 Handler FATAL: Error source is 106.
    2014-05-13 20:45:18:656  900 1384 DnldMgr FATAL: DM:CAgentDownloadManager::GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x80073712.
    2014-05-13 20:45:18:656  900 1384 DnldMgr Error 0x80073712 occurred while downloading update; notifying dependent calls.
    2014-05-13 20:45:18:680  900 1384 Agent *********
    2014-05-13 20:45:18:680  900 12d0 AU >>##  RESUMED  ## AU: Download update [UpdateId = {332AA342-7AC4-4FB4-9C27-C2C9F4EAE6C0}]
    2014-05-13 20:45:18:680  900 1384 Agent **  END  **  Agent: Downloading updates [CallerId = AutomaticUpdatesWuApp]
    2014-05-13 20:45:18:680  900 12d0 AU   # WARNING: Download failed, error = 0x80073712
    2014-05-13 20:45:18:680  900 1384 Agent *************
    2014-05-13 20:45:18:684  900 1384 DnldMgr *************
    2014-05-13 20:45:18:684  900 1384 DnldMgr ** START **  DnldMgr: Downloading updates [CallerId = AutomaticUpdatesWuApp]
    2014-05-13 20:45:18:684  900 1384 DnldMgr *********
    2014-05-13 20:45:18:684  900 1384 DnldMgr   * Call ID = {F055F0F1-9AE5-433A-A2BD-03D142912DA1}
    2014-05-13 20:45:18:684  900 1384 DnldMgr   * Priority = 3, Interactive = 1, Owner is system = 1, Explicit proxy = 0, Proxy session id = 2, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}
    2014-05-13 20:45:18:684  900 1384 DnldMgr   * Updates to download = 1
    2014-05-13 20:45:18:684  900 1384 Agent   *   Title = Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2742599)
    2014-05-13 20:45:18:684  900 1384 Agent   *   UpdateId = {3732354D-3DAE-4E71-B82C-61A12C300F72}.201
    2014-05-13 20:45:18:684  900 1384 Agent   *     Bundles 1 updates:
    2014-05-13 20:45:18:684  900 1384 Agent   *       {D7F10B98-0B4D-402C-B0A5-FF2135F8620C}.201
    2014-05-13 20:45:18:687  900 1384 DnldMgr ***********  DnldMgr: New download job [UpdateId = {D7F10B98-0B4D-402C-B0A5-FF2135F8620C}.201]  ***********
    2014-05-13 20:45:18:687  900 1384 DnldMgr   * Queueing update for download handler request generation.
    2014-05-13 20:45:18:687  900 1384 DnldMgr Generating download request for update {D7F10B98-0B4D-402C-B0A5-FF2135F8620C}.201
    2014-05-13 20:45:19:325  900 1384 Handler Generating request for CBS update D7F10B98-0B4D-402C-B0A5-FF2135F8620C in sandbox C:\Windows\SoftwareDistribution\Download\44b836e953f10e780a421d6fb4995a79
    2014-05-13 20:45:19:325  900 1384 Handler Selected payload type is ptExpress
    2014-05-13 20:45:19:326  900 1384 Handler UH: DpxRestoreJob returned 0x80070002
    2014-05-13 20:45:19:326  900 1384 Handler Detected download stat
    M Tipler

    Unfortunately that made no difference - the updates still won't install and the checksur.log file still contains the same data...
    =================================
    Checking System Update Readiness.
    Binary Version 6.1.7601.22471
    Package Version 25.0
    2014-05-14 08:15
    Checking Windows Servicing Packages
    Checking Package Manifests and Catalogs
    Checking Package Watchlist
    Checking Component Watchlist
    Checking Packages
    Checking Component Store
    (f)    CSI Missing Winning Component Key    0x00000000    amd64_microsoft-windows-csrsrv_31bf3856ad364e35_6.1.7601.18113_none_27ac1dcabbfe37b8        
    (f)    CSI Missing Winning Component Key    0x00000000    amd64_microsoft-windows-smss_31bf3856ad364e35_6.1.7601.18113_none_0a5f8ec22fd235a9        
    (f)    CSI Missing Winning Component Key    0x00000000    wow64_microsoft-windows-smss_31bf3856ad364e35_6.1.7601.18113_none_14b439146432f7a4        
    (f)    CSI Missing Winning Component Key    0x00000000    wow64_microsoft-windows-csrsrv_31bf3856ad364e35_6.1.7601.18113_none_3200c81cf05ef9b3        
    Summary:
    Seconds executed: 446
     Found 4 errors
      CSI Missing Winning Component Key Total count: 4
    (w)    Unable to get system disk properties    0x0000045D    IOCTL_STORAGE_QUERY_PROPERTY    Disk Cache    
    Looks like a repair install is required. I'll keep you updated.
    M Tipler

  • Windows server 2008 R2 x64 Authentication failure while try to access Windows server 2003 R2

    Hello,
    I try to access Windows Server 2003 R2 Standard from Windows Server 2008 R2 x64 standard using integrated windows authentication . And because my application tries to read SQL server i'm getting and error that user is not trusted. Then I tried to open a
    simple shared folder on  2003 and none of the users is able to do it. Both servers are part of common workgroup in the same IP range. Using domain is not an option. Migrating 2003 to 2008 is not an option either. The specific DB provider I have to use
    supports only windows authentication, so creating user into SQL server is not an option too. I have tested many applications and cases which requires/uses windows authentication and non of the manage to connect.
    Any help is very welcome because things are urgent!
    Authentication failure

    That method in workgroup mode may be a problem.
    Authentication in SQL Server
    Might ask them over here.
    SQL Server forums on
    MSDN
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Installing Flash Player 12 on Windows Server 2008 R2 X64 with IE 8

    I have an app that runs on Windows Server 2008 R2 X64 that requires Flash Player 12. When I try to install Flash Player 12 it says that Windows Server R2 X64 is not supported by way of eliminating it from the list of supported operating systems. When I do a search I can find many people who indicate they have it running or explain "hacks" to get it running. Since the app requires it there is an implimcation that it should be running on this OS. What is the offical word on this?  This is a production server and I really don't want an "unsupported hack" running in this environment. Is there a supported means of having Flash Player 12 run on Windows Server 2008 R2 X64 with IE8 even if it is within the 32 bit version of the browser?

    Server 2008 (x86) is supported, and I had an x64 machine set up last month that had FP12 installed and running in IE and Firefox. 64 bit IE wouldn't run it for some reason, but the 32 bit did. It installed in C/Windows/System32/Macromed/Flash and C/Windows/SysWOW64/Macromed/Flash, but I was unable to get the ActiveX plug-in to enable outside of 32 bit IE.
    I also set up a Server 2012 machine that DID support the x64 ActiveX, but that's probably not an option for you.
    Like you, I'd be leery of "hacks" to get it to run as an x64 pkug-in, as it may have unintended and undesired consequences in other areas.

  • Problems LMS-4.2 Installation on Windows Server 2008 R2 Enterprise SP1

    Hi all,
    During the installation of the LMS-4.2,
    It passed the "Initializing" and "Copying" stages,
    but, in the "Configuring", it never finishes,
    Anyone had have a similar problem?
    the installer is for - LMS-4.2 and the OS is Windows Server 2008 R2 Enterprise SP1

    Thanks for the update. Glad to know it has installed now.
    There can be some port clashes and resource scarcity when other applications may be using it. Hence we recommend to have majorly LMS as the primary software on the server's.
    Also, LMS is not supported in other languages installers or setups except English and Japanese.
    There are a couple more things you can do/check prior to running the installation.
    LMS generally need Naming convention to handle long names/path etc. By default C: has 8.3 Naming convention enabled. However if you installed on different drive (for eg E:), for which this may be disabled.
    To check naming convention you can run the following command from Windows Command prompt: 
                                       cmd>fsutil.exe 8dot3name query <Drive>
    Example:
    C:\Users\winlau>fsutil 8dot3name query C:
    The volume state for Disable8dot3 is 0 (8dot3 name creation is enabled).
    The registry state of NtfsDisable8dot3NameCreation is 2, the default (Volume level setting).
    Based on the above two settings, 8dot3 name creation is enabled on C:.
    8dot3 needs to be enabled for all drives LMS will potentially use, including:
    Drive where TEMP/TMP is located
    The drive LMS is installed to
    The drive LMS backs up to
    Drive used for a relocated RME Shadow directory or other nonstandard paths written to.
    In some cases, altering the TEMP and TMP variables to be a short path (eg C:/temp or C:/tmp) may avoid the issue, but not always.
    Hence, to be safe, it is best to enable 8dot3name creation globally, either via the registry or Windows CLI
    Sample command to enable globally:
      "fsutil 8dot3name set 0"     
    Sample command to enable on one volume:
      "fsutil 8dot3name set X: 0"  
    Note that this needs a reboot to take effect.  You should not disable 8dot3name creation which already has it enabled, especially the system volume (usually C:). 
    For further information  http://technet.microsoft.com/en-us/library/cc778996%28v=ws.10%29.aspx
    -Thanks
    Vinod
    **Encourage Contributors. RATE them**

  • Cisco LMS 4.1 Installation on Windows Server 2008 R2, Databases not created

    Hi There,
    As always, I am trying to install LMS 4.1 on windows server 2008 R2 and after the installation and login to the LMS I find the following:
    DCRServer is down or may not be completely up. Check if the DCRServer process is running.
    And after some troubleshooting I found that the LMS is not creating the CMF database and the other databases. Attached is the installation log file, if someone could help me with it would be appreciated. Please note the following:
    1. I have downloaded the installation file from Cisco website twice, so I do not think it is the file that is corrupted, also it is only evaluation license.
    2. I have met all the prerequisites and requirement as in the documentation guides, but maybe there is something still wrong.
    Thanks,

    Also Here is more info output:
    C:\Program Files (x86)\CSCOpx>pdshow -brief
      Process               State                                     Pid
      Tomcat                Program started - No mgt msgs received    1572
      TomcatMonitor         Running normally                          2236
      Apache                Program started - No mgt msgs received    2436
      DataPurge             Administrator has shut down this server   0
      DCRServer             Failed to run                             0
      CMFOGSServer          Administrator has shut down this server   0
      EssentialsDM          Administrator has shut down this server   0
      ConfigMgmtServer      Never started                             0
      ConfigUtilityService  Never started                             0
      CTMJrmServer          Administrator has shut down this server   0
      ChangeAudit           Never started                             0
      SyslogAnalyzer        Program started - No mgt msgs received    2976
      ICServer              Running normally                          5096
      EnergyWise            Never started                             0
      PMCOGSServer          Administrator has shut down this server   0
      IPMOGSServer          Administrator has shut down this server   0
      IPMProcess            Never started                             0
      TISServer             Program started - No mgt msgs received    2544
      DFMOGSServer          Program started - No mgt msgs received    876
      InventoryCollector    Running normally                          3052
      Interactor            Program started - No mgt msgs received    5136
      InventoryCollector1   Program started - No mgt msgs received    5144
      Interactor1           Program started - No mgt msgs received    5308
      PTMServer             Program started - No mgt msgs received    5320
      UPMProcess            Never started                             0
      TISDiscoveryJobCreate Administrator has shut down this server   0
      SyslogCollector       Running normally                          5340
      Proxy                 Program started - No mgt msgs received    5348
      PMServer              Running normally                          5360
      NameServer            Program started - No mgt msgs received    5680
      NameServiceMonitor    Running normally                          5876
      LicenseServer         Program started - No mgt msgs received    5884
      FHPurgeTask           Never started                             0
      EventFramework        Program started - No mgt msgs received    5892
      EPMServer             Program started - No mgt msgs received    5904
      FHServer              Administrator has shut down this server   0
      NOSServer             Program started - No mgt msgs received    5580
      diskWatcher           Running normally                          5640
      DFMMultiProcLogger    Program started - No mgt msgs received    5864
      DFMLogServer          Program started - No mgt msgs received    4896
      DFMCTMStartup         Administrator has shut down this server   0
      DfmBroker             Running normally                          6104
      DfmServer             Running normally                          6416
      DfmServer1            Running normally                          6424
      DCRDevicePoll         Never started                             0
      CSRegistryServer      Running normally                          6432
      CSDiscovery           Never started                             0
      AdapterServer1        Program started - No mgt msgs received    6440
      AdapterServer         Program started - No mgt msgs received    6448
    C:\Program Files (x86)\CSCOpx>pdshow DCRServer
            Process= DCRServer
            State  = Failed to run
            Pid    = 0
            RC     = -3
            Signo  = 1073741821
            Start  = N/A
            Stop   = 07/02/2012 17:39:06
            Core   = Not applicable
            Info   = Application failed or was registered incorrectly.
    C:\Program Files (x86)\CSCOpx>net stop crmdmgtd
    The Cisco Prime Daemon Manager service is stopping..........................................
    The Cisco Prime Daemon Manager service was stopped successfully.
    C:\Program Files (x86)\CSCOpx>bin\perl.exe objects\db\conf\configureDb.pl action=validate dsn=cmf
    INFO: C:\PROGRA~2\CSCOpx/objects/db/conf/ConfigureDB.LOCK locked for the operation...
    ERROR: [StandardDbUpgrade] : Database cmf is not installed.
    INFO: C:\PROGRA~2\CSCOpx/objects/db/conf/ConfigureDB.LOCK released for the future operations...
    C:\Program Files (x86)\CSCOpx>bin\perl.exe bin\dbpasswd.pl all
    ERROR: There is no database available to change password.
    C:\Program Files (x86)\CSCOpx>bin\perl.exe bin\dbRestoreOrig.pl dsn=cmf dmprefix=Cmf npwd=pwd
    'cmf' is not a valid data source for the product.

  • OBI11g installation on Windows Server 2008 R2 (64bit)

    Hi,
    Sorry to pick up this topic again, but my research in the forum and other inet sites doesn't help me so far and my installation will not work.
    My Situation:
    I have a Windows Server 2008 R2 (64bit) default installlation. The server (HyperV-managed) has 4 GB RAM.
    I added a Loopback adaptor and set for the loopbackadapter a fixed IP (10.10.10.10 Subnet: 255.255.255.0).
    Entered in the host file (127.0.0.1 localhost and 10.10.10.10 servername)
    Installed JDK 64bit
    Installed Oracle Client 32bit
    Then I tried all three options:
    1) Default OBIEE Installation --> start of coreapplication_obips1 has failed. Everything else was fine. I was not able to start the obips1 manually
    2) Enterprise Installation --> start of coreapplication_obips1 has failed. Everything else was fine. I was not able to start the obips1 manually
    3) Manually installed WebLogic 1033 --> SoftwareOnly installation of OBIEE --> manually start config of OBI Installation --> same result as above!
    Perhaps you have some hints for me.
    Cheers
    Wolfgang

    Not in the slightest - I installed five just the other week
    All our virtual machines, running 2008 R2 x64. We went for Enterprise Edition, but I believe in CF9 they're both 64-bit anyway. These are the from the build notes I built up:
      Install extra roles:
        Application Server
        Web Server (IIS)
          Application Development
          IIS6 METABASE Compatibility
      Install extra Features:
        SMTP Service
    Other than that nothing else needs doing. It's worth noting (as a slight but irritating aside) that in 2008 R2 the SMTP service is set to Manual not Automatic, so you'll want to change that unless you want your emails to stop every time you reboot the box.
    But the actual install itself was far simpler than CF8 on 2008.
    O.

  • EPM 11.1.2.1 Installation problem on Laptop (Windows Server 2008 R2 x64)

    Dear All,
    I hope someone can help me here with EPM 11.1.2.1 installation problem on my notebook - Windows Server 2008 R2 x65, 8 GB RAM, running SQLServer 2008 Express.
    I installed Hyperion Foundation. The installation and configuration went through successfully.
    I am facing two problems:
    Problem 1
    When I try to access the workspace through the URL http://hostname:19000/workspace/index.jsp, I get error:
    Quote
    Failure of server APACHE bridge:
    No backend server available for connection: timed out after 10 seconds or idempotent set to OFF.
    End-quote
    Problem 2
    Also, the service "Hyperion EPM Server" service not able to start. When I try to start, I get error message:
    Quote
    The Hyperion EPMA Server service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.
    End-quote
    I tried checking everything but can't seem to figure out what's going wrong.
    I have uploaded (1) EPM Config Manager screenshot (2) EPM System diagnostic report (3) EPM Registry editor output and (4) system services listing at
    http://www.mediafire.com/?pr9l1v99w4d9u4r,c3vggxeibqkxbo2,lyzclu2aggbn8qh,8kur9gxal5b361z
    It would be very grateful if someone can have a look and help me.
    Many thanks in advance for any help / pointers / suggestions.
    - Neil

    Hi Pablo,
    Thanks to your suggestion for database, problem #2 seem to be resolved. I am now able to start EPMA Service.
    Re: Problem 1
    a) Log for C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\services\HyS9FoundationServices-sysout is as below
    -----<start>--------
    <Feb 15, 2012 4:04:47 AM > <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
    <Feb 15, 2012 4:04:47 AM > <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
    <Feb 15, 2012 4:04:47 AM > <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
    <Feb 15, 2012 4:04:48 AM > <Info> <Security> <BEA-090065> <Getting boot identity from user.>
    Enter username to boot WebLogic server:
    ------<end>-----
    I am intrigued by the last line "Enter username to boot WebLogic server:" - is there anything wrong going here?
    Log for C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\FoundationServices0 is as below:
    -----<start>--------
    ####<Feb 15, 2012 12:49:49 AM <Info> <WebLogicServer> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589459> <BEA-000000> <WebLogic Server "FoundationServices0" version:
    WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
    ####<Feb 15, 2012 12:49:49 AM <Notice> <Log Management> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589568> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\FoundationServices0.log is opened. All server side log events will be written to this file.>
    ####<Feb 15, 2012 12:49:49 AM <Info> <Log Management> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589584> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
    ####<Feb 15, 2012 12:49:49 AM <Info> <Diagnostics> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324589631> <BEA-320001> <The ServerDebug service initialized successfully.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "t3" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "t3s" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "http" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "https" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "iiop" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "iiops" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "ldap" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "ldaps" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "cluster" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "clusters" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "snmp" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "admin" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <RJVM> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594950> <BEA-000570> <Network Configuration for Channel "FoundationServices0"
    Listen Address          :28080
    Public Address          N/A
    Http Enabled          true
    Tunneling Enabled     false
    Outbound Enabled     false
    Admin Traffic Enabled     true>
    ####<Feb 15, 2012 12:49:54 AM <Info> <RJVM> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594950> <BEA-000570> <Network Configuration for Channel "FoundationServices0"
    Listen Address          :28443 (SSL)
    Public Address          N/A
    Http Enabled          true
    Tunneling Enabled     false
    Outbound Enabled     false
    Admin Traffic Enabled     true>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594982> <BEA-002609> <Channel Service initialized.>
    ####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595013> <BEA-000406> <NTSocketMuxer was built on Jan 24 2006 20:40:35
    >
    ####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595075> <BEA-000436> <Allocating 4 reader threads.>
    ####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595075> <BEA-000446> <Native IO Enabled.>
    ####<Feb 15, 2012 12:49:55 AM <Info> <IIOP> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595216> <BEA-002014> <IIOP subsystem enabled.>
    ####<Feb 15, 2012 12:49:59 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324599818> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
    ####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600286> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
    ####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600442> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_9V5rIdcvntKDauQNwFIW41HchnU=>
    ####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600722> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\XACMLAuthorizermyrealmInit.initialized, will load full LDIFT.>
    ####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600738> <BEA-090074> <Initializing Authorizer provider using LDIF template file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift.>
    ####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601050> <BEA-090075> <The Authorizer provider has had its LDIF information loaded from: C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift>
    ####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601315> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\DefaultCredentialMappermyrealmInit.initialized, will load full LDIFT.>
    ####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601315> <BEA-090827> <LDIF template file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DefaultCredentialMapperInit.ldift was empty. The WebLogic provider CredentialMapper has been bootstrapped but has not been initialized with any LDIF data.>
    ####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601331> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\XACMLRoleMappermyrealmInit.initialized, will load full LDIFT.>
    ####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601331> <BEA-090074> <Initializing RoleMapper provider using LDIF template file C:\Oracle\Middleware\user_projects\domains\EPMSystem\security\XACMLRoleMapperInit.ldift.>
    ####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601346> <BEA-090075> <The RoleMapper provider has had its LDIF information loaded from: C:\Oracle\Middleware\user_projects\domains\EPMSystem\security\XACMLRoleMapperInit.ldift>
    ####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601565> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server FoundationServices0 for security realm myrealm.>
    ####<Feb 15, 2012 12:50:01 AM <Notice> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601565> <BEA-090082> <Security initializing using security realm myrealm.>
    ####<Feb 15, 2012 12:50:01 AM <Notice> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601658> <BEA-090083> <Storing boot identity in the file: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\security\boot.properties>
    ------<end>-----

  • Crystal Reports Server 2008 V1 installation on Windows Server 2008

    Hello,
    I am trying to install CRS2008V1 on Windows Server 2008 x64 with SQL Server 2008 and IIS 7.0. Installation wizard says that installation is finished succesfull but I cannot access CMC Console and InfoView. Is there anything which shuld be done more? CRS2008 installation on Windows 2003 was trouble free. I'm very confused now... Anyone can help me?
    Regards,
    Seb.

    I had similar issues.  My resolution was...
    - In IIS Manager, create a new Application Pool called "Classic .NET AppPool"
    - For that app pool, set the managed pipeline mode to "Classic"
    - with that new app pool selected, click on View Applications in the right-hand panel
    - make sure that you see all of the Business Objects applications listed, if not...
         - click the Remove Filter link in the top panel
         - open each Business Objects related application and assign it to the new app pool
    You may need to do an iisreset at that point, but that cleared up the issue for me.

  • BPC Installation on Windows Server 2008

    Does anyone know if SAP BPC version 7.0 can be installed on windows server 2008?

    Hi Harry,
    The installation of BPC on the Microsoft platform is tricky enough that for any business-related purpose, you should rely on the guidance of the specialists who do installations.  They will tell you that right now the Windows Server 2003 platform is really the only way to go, and as someone who has worked on these, I can tell you that it is crucial to reduce the number of new platform choices and/or chances for bugs/glitches/changes.
    To learn more about the process, you should go to the Technical Installation class, which used to be RABPC7 on the 5.1 version.  It might still be the same course number. 
    If you'd like a taste of all of the parts of the process involved, there is a document on the SDN called "How to Perform a Dual-Server BPC for Microsoft Install".  It doesn't cover everything, but it will give you a flavor for the process.
    In any case, I would strongly recommend that you don't even look at Win2K8 until they update BPC with it.
    Sidenote:  SQL 2008 is supported as of 7.0 SP3, I think and we've been using it on a DEV environment without any issues so far.

  • Cold fusion 9 Installation on Windows server 2008 (IIS 7.0) - IIS websites not working ?

    I am having a 64 bit machine on which windows server 2008 R2 is installed. IIS 7.0 is configured and running on it. on which I have my organisations main website. I have to install Cold fusion on this machine as some of my site pages are designed with CF.
    I used all the default settings for installing cold fusion 9. It got completed succefully. But after I restarted my system and tried accesing my ASP.net website it was not loading the page. Text getting displayed was only as follows '<script> src="'. Later I unsistalled CF and my site was working fine.
    Please can any one guide me to successfully install Cold fusion without disturbing my main site deployed on IIS ?

    Sarfarajms, I don't recognize what about the CF install would conflict with ASP.NET, but I'll note this:
    If you downloaded CF 9 recently, you are still running 9.0--which does NOT formally support IIS 7. If you followed the steps about enabling IIS 6 compatibility and such (in the install guide or some blog entry), perhaps that caused the conflict.
    Instead, you will want to install 9.0.1 (CF 9 Updater 1, which is NOT provided in the current 9.0 install). THAT is the first release to formally support IIS 7. And if you read the updater installation guide (http://www.adobe.com/support/documentation/en/coldfusion/901/cf901install.pdf), it discusses how to deal with the upgrade depending on what you had done with respect to IIS, starting at the bottom of its page 8.
    Hope that helps.
    /charlie

Maybe you are looking for

  • Error in using bapi_salesorder_simulate

    Hi guys, Im having this error is BAPI_SALESORDER_SIMULATE: "please enter ship-to party or sold-to party" What causes this error? Please show some sample also on how to populate this bapi to retrieve pricing condition given the delivery number for PO(

  • JavaFX Window Icon

    Hi I saw in the release notes of JavaFX 1.0 (http://java.sun.com/javafx/1/reference/releasenotes/javafx-sdk-release-notes.html) that setting icons for the Stage class does not work. In my application which uses JavaFX 1.1 I also encountered this prob

  • IPhoto not displaying imported RAW files

    I have the latest OS and iPhoto, and am importing Nikon RAW NEF files from my D7000 into iPhoto...Yes, the OS sees/opens the files, iPhoto does as well, when importing...but afterwards I go to Events and all I get are black boxes with white dotted ou

  • Is Table Control's default size is 13 always in all resolutions?

    Hi Experts, Pls. let me clarify that, " Is Table Control is always possess the DEFAULT # of records as 13? Is it SAP's  standard feature? or Is it purely depends on the machine (windows) resolution? Particularly, am interested in BDC scenarios? Is an

  • Graphs in cluster

    Hi, When I run this vi the graps remain empty. How come the data is not being graphed?  Also is there a better way to access the graphs in a cluster. Can I loop through the cluster? I don't want to put the graphs in an array because I want them to be