Asp site work local but doesn't work after upload to the server

I built a ASP site with MS access driven, it works good at my
local computer but after I upload it to the internet server, it
failed. I am pretty much sure it's data connection problem, any
solution anyone,............
the "conn.asp" inside the "Connections" folder as follow:
<%
// FileName="Connection_odbc_conn_dsn.htm"
// Type="ADO"
// DesigntimeType="ADO"
// HTTP="false"
// Catalog=""
// Schema=""
var MM_connRealtor_STRING = "dsn=data_realtor;"
%>

I seen other ppl having the same problem, and there is an
exact topic here at this forum, pls go to the topic "Can't connect
to access db hosted by Godaddy" I had my problem in detail there,
pls help if you can..........thx

Similar Messages

While playing games like NFS and CounterStrike my macbook pro it does connects to the hotspot by any device either a Windows laptop, but doesn't show or connect to the server (LAN) created by windows player.Or neither connects to the server that i created

While playing games like NFS and CounterStrike my macbook pro it does connects to the hotspot by any device either a Windows laptop, but doesn't show or connect to the server (LAN) created by windows player. Or, any other devices doesn't connects to the LAN server that i created in the Game.
Could any one help me please.

Please do not post more than about 50 lines of console logs or output from an Application crash at a time. No one can make it through those.
If you had a kernel panic, those are Full of good information and should be posted in their entirety. They are stored, and can be read back and posted using this article:
How to log a kernel panic

Apple TV works wired but doesn't work with Airport

Hello everybody
I have the following:
o Mac Book Pro 13
o Apple TV
o D-Link WiFi Access Point (192.168.1.0/24)
o Ethernet Network (also 192.168.1.0/24)
o DHCP Server
Initially I connected to Apple TV via Ethernet. As long as my Mac Book is wired to the network (firewall disabled, 192.168.1.189), Apple TV (also wired via Ethernet, 192.168.1.182) is able to connect to my iTunes library and iTunes finds Apple TV and everything works just fine. However, as soon as I connect my Mac Book via WiFi (192.168.1.200), the connection between these two devices is lost.
As a network administrator this confuses me quite a lot. I thought, that the communication between these two softwares is a typical client server connection using daap protocol. For me it would be logical that iTunes connects to Apple TV on startup and establishes the network connection. Obviously I am wrong!
What do I have to do, to make these two devices communicating while my Mac Book is wired as well as WiFi'ed to my private network? Any help is appreciated.
So long, Stefan

OK, I tcpdump'ed the network traffic on the wifi network adapter while opening iTunes. There are many mdns (bonjour) packets, even from the Apple TV box. That most probably means, that the two devices are being found using bonjour. The Apple TV box also sends the following request to my iTunes:
+GET /ript/readytoconnect?machine-id=0x2D19D2D21EE788ED HTTP/1.1+
+Host: 192.168.1.200:3689+
+User-Agent: iTunes-AppleTV/4.1 (2)+
+Accept-Encoding: gzip+
+Connection: close+
+HTTP/1.1 204 No Content+
+Date: Tue, 30 Nov 2010 19:29:54 GMT+
+DAAP-Server: iTunes/10.1 (Mac OS X)+
+Content-Type: application/x-dmap-tagged+
+Content-Length: 0+
As long as my Mac Book Pro is ethernet wired, the request from the Apple TV box looks quite different:
+POST /ript/readyforconnect HTTP/1.1+
+Host: 192.168.1.182:3689+
+User-Agent: iTunes/10.1 (Macintosh; Intel Mac OS X 10.6.5) AppleWebKit/533.19.4+
+Accept-Encoding: gzip+
+Content-Length: 453+
+Connection: close+
+<?xml version="1.0" encoding="UTF-8"?>+
+<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">+
+<plist version="1.0">+
<dict>
<key>homeShareGroup</key>
<string>00000000-1114-3a7c-f441-ca08dbf24097</string>
<key>iTunesDatabaseID</key>
<integer>7401468360494643499</integer>
<key>iTunesMachineID</key>
<integer>4142801218510725739</integer>
<key>pairingGUID</key>
<integer>0</integer>
</dict>
</plist>
+HTTP/1.1 200 OK+
+Date: Tue, 30 Nov 2010 16:11:28 GMT+
+RIPT-Server: iTunesLib/4.1 (Mac OS X)+
+Content-Type: application/octet-stream+
+Content-Length: 214+
+Content-Encoding: gzip+
Any help with bonjour and Airplay is appreciated.
Thanks...

Swf works locally, but not on server

I have an issue with an xml-driven swf file. It plays fine when I test the site locally, but not when it's uploaded to a server. Here is a link to the page. There are many posts on this and other forums describing the same problem, though I can't find the right solution. The only thing it has convinced me of, is that it is probably a pathing problem. I purchased the file online, and instead of one swf and one xml there are about ten of each to make it work. In addition to this there are about 40 .as files. (all this to make it "easier" to customize). Since I plan to use this banner rotator on multiple pages, it will be very unconvenient to upload all these files for every page I make. I checked with support for this product, and was told I could make a flash directory, only duplicating the xml-files for each new page and linking the xml back to the swf-files. Otherwise the support answer was very short and unhelpful. I have renamed every path in the xmls so that it should be right. As I said, the file works locally, so I'm not sure what I am doing wrong.
I have posted in adobe forums before, and I have alwas found helpful and kind responses.
Thank you,
Siri

They're all uploaded to the server, it is also possible for me to dowload them from there. When i run the main swf file through flash player debugger, I get this message:
Error #2044: Unhandled ioError:. text=Error #2032: Stream Error. URL: file:///Users/Siri/Documents/gullstolen/hjemmeside/flash/produkter/deploy/xml/abrMain.xml
          at com.sQrt121.utils::CustomLoader/configureLoader()
          at com.sQrt121.utils::CustomLoader()
          at com.sQrt121.utils::LoadJob/initJob()
          at com.sQrt121.utils::LoadJob()
          at com.sQrt121.utils::ContentLoader$/addJob()
          at AbrMain/init()
So I guess it can't locate the xml folder (since it is not there), but I don't know how to change the path. I can change it in the xml, pointing to the swf, but how do I do it the other way?
This is the main xml-file:
<?xml version='1.0' encoding='UTF-8'?>
<abrMain
          width                              = "300"
          height                              = "250"
          pauseOnOver                    = "off"
>
          <item          swf                    = "/Users/Siri/Documents/gullstolen/hjemmeside/flash/produkter/deploy/abrcontent.swf"                                    xml = "xml/abrContent.xml"                                        config          = "xml/config.xml"/>
          <item          swf                    = "/Users/Siri/Documents/gullstolen/hjemmeside/flash/produkter/deploy/abrbuttonscolor.swf"                              xml = "xml/abrButtonsColor.xml"                                        config          = "xml/config.xml"/>
          <item          swf                    = "/Users/Siri/Documents/gullstolen/hjemmeside/flash/produkter/deploy/abrpreloadercircle.sw f"               xml = "xml/abrPreloaderCircle.xml"                              config          = "xml/config.xml"/>
          <item          swf                    = "/Users/Siri/Documents/gullstolen/hjemmeside/flash/produkter/deploy/abrpreloaderline.swf"                               xml = "xml/abrPreloaderLine.xml"                              config          = "xml/config.xml"/>
          <item          swf                    = "/Users/Siri/Documents/gullstolen/hjemmeside/flash/produkter/deploy/abrplaypause.swf"                               xml = "xml/abrPlayPause.xml"                                        config          = "xml/config.xml"/>
</abrMain>
the abrMain.xml tells the swf what files it shold use, and where to find them, but where do I tell the abrMain.swf to find the xml? Maybe this is an issue for product support instead, though they only answer short and cryptic.
Murray *ACP* wrote:
None of your SWF files are found in the location where the page's code places them.
For example:
<param name="movie" value="../../../flash/produkter/deploy/abrmain.swf" />
Did you upload them?

Flash video works locally but not on server

I am hoping that someone can help me solve this problem. I cannot seem to fix it. I have created a flash video and it works fine locally but doesn't when I upload it to the server. All I get is a white blank screen. I can access the Flash settings but the video doesn't display. I have checked all file paths, which are correct since everything is in the same folder. I have looked up other forums trying to find a solution but nothing has worked yet. Does anyone here have any idea on how to solve this problem?
My operating system is Windows XP. I am using IE8 browser and my flash player is up to date. Any help would be appreciated. Thanks.

Nevermind. I ended up solving the problem on my own. This old guide that I used before ended up helping me out. I will post the link here in case anyone else has the same problem.
http://web.archive.org/web/20080723224615/http://www.adobe.com/devnet/flash/articles/flvpl ayback_behaviors_print.html

Flash site works locally but not online (uploaded to server)

We have bought a flash portfolio template and have customized it with our pictures, video, etc.
When we test it locally on our computer (using different web browsers) it all works perfectly well. We have uploaded the finished website to our server and when you go to the address online, it doesn't work (a loader progress shows but it is stopped and nothing happens).
We have however uploaded the original template we bought and it works perfectly online.
The template consists of and index.html, various .swf, and various .xml that we have modified according to the template instructions (it also contains a java script folder we haven't touched).
What is it wrong with our modified template - it works locally without problem…!
Thanks for your help

When a Flash file works locally but not on-line, it's almost always a pathing issue (provided you did upload ALL files and do not have something missing... as suggested by Ned).
A "pathing issue" results when the main .swf cannot find one or more of the associated Flash files...like an xml file or images.
It can be something as simple as using switching file names to all lower case. Local machine is not case sensative... most servers are. So "My Photo.JPG" is not the same as "my_photo.jpg". When naming files, best to use all lower case, no spaces in any file or folder names... use_underscore_instead.
But the most common cause is that those associated files (xml, images, etc.) are not pathed relative to the Web page where the main .swf is embedded. Pathing to the .xml and image files should be as though the .swf was located in the same folder as the Web page... NOT the actual location of the .swf file.
And that includes paths to the xml file and paths to image files coded into those xml files. Everything need to be coded relative to the Web page.
This topic has been covered a number of times here:
http://forums.adobe.com/message/4368273#4368273
http://forums.adobe.com/message/4294529#4294529
http://forums.adobe.com/message/4280086#4280086
http://forums.adobe.com/message/4267408#4267408
Best wishes,
Adninjastrator

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on that wifi network

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

cffeed caching works locally but not on server

So I got my new Hostek account set up (woohoo!) and I've started uploading some basic files so I can do thinks like validate my code and make sure everything's working. One thing that does not work (but does locally) is my news feed caching.
Pulling in two RSS feeds was seriously slowing down my index page loading, so I stole a trick from Ray Camden on caching the feeds. It works perfectly on my dev machine at home, but doesn't work on my hosted account.
Here's the exact code being used:
<cfset feedurl = "http://velonews.competitor.com/feed">
<cfset cacheTime = #createtimespan(1,0,0,0)#>
<cfif not structKeyExists(application,"rsscache") or dateDiff("n", application.rsscache.created, now()) gt cacheTime>
    <cffeed source="#feedurl#" query="entries">
    <cfset application.rsscache = structNew()>
    <cfset application.rsscache.data = entries>
    <cfset application.rsscache.created = now()>
</cfif>
<ul>
<cfloop query="#application.rsscache.data#" startrow="1" endrow="6">
<cfoutput><li><a href="#rsslink#">#title#</a></li></cfoutput>
</cfloop>
</ul>
I tried wrapping a try/catch around the top section (above the <ul>) and still got nothing for an error message. The page just stops being rendered at that first <ul>.
I'm not sure why it works locally but not on the web server. Any ideas?

Miraculously, I got it working.
I changed this:
<cfloop query="#application.rsscache.data#" startrow="1" endrow="6">
<cfoutput><li><a href="#rsslink#">#title#</a></li></cfoutput>
</cfloop>
To this:
<cfoutput maxrows="6" query="application.rsscache.data">
<li><a href="#rsslink#">#title#</a></li>
</cfoutput>
And bingo! It worked. Perhaps it's an idiosyncrasy between CF9 and CF10.

Spry Image Slideshow works locally but not live!?!?

I am new to the whole website creation. I used the Spry Image Slideshow widget from the widget browser and everything works perfectly when I tested it locally. However, once i uploaded to the server and tested the links I get errors stating that it cannot locate the .js files. Like stated, I am very much new to this and have no idea how to fix this problem. Has anyone else ran into this or know of a solution?
My website address is www.terranceperdue-architecture.com and the links in question are on the portfolio link.
So more specifically:
http://www.terranceperdue-architecture.com/Design%20Studio%201.html
Any help would be greatly appreciated as I am hoping to use this website to gain an internship for the summer. But if it is not working then that is not an option.
Thanks for any and all insight.
-Terrance

I see where you have posted that you got your slideshow to work, but I do not see any of the reponses on how you did it. I am having the same problem when I test my slideshow locally on dreamweaver it works, but it does not work when I upload it to the internet. It doesn't give me any error, but all it does is show me a black box with a spinning play button like it is trying to load. It doesn't do anything else. I have tried looking at IE, Safari, and Firefox and I get the same thing on all of them.
Thanks,
Christin

Hi! My friend told me that her iPhone 5 has problem and the charger is not charging. I gave her mine, but doesn't worked on her too. After that I tried to charge my iPhone 5 and it doesn't work on my phone too. Have you any idea ?? What to do ??? Thanx !

Hi! My friend told me that her iPhone 5 has problem and the charger is not charging. I gave her mine, but doesn't worked on her too. After that I tried to charge my iPhone 5 and it doesn't work on my phone too. Have you any idea ?? What to do ??? Thanx !

But of course I'm sure! I went to the local apple store and they replaced my charger ! Thank you!

I updated my iphone 5 to ios 6.0.2. my wifi says its connected but doesn't work now. It doesn't matter what wifi network I connect to. It worked before updating my phone. I can no longer use facetime or use wifi at all. I'm not sure what to do to fix it.

I updated my iphone 5 to ios 6.0.2. my wifi says its connected but doesn't work now. It doesn't matter what wifi network I connect to. It worked before updating my phone. I can no longer use facetime or use wifi at all. I'm not sure what to do to fix it.

I'm having similar issues with my phone. I got my first iPhone recently, only had an iPod touch gen4 for a little over a year. Updated to 6.0.2 when we got the phone (iPhone 5) a few days before Christmas. When I got home on the evening of January 11, my phone would not connect the router anymore. I was able to get it to connect after resetting the phone and the router, updating the router, and manually connecting. That laste for a few minutes and then wouldn't work anymore. I live in an area with very limited service, we have a network extender installed to help, and I am barely getting a 3G signal at times.
My wife's iPad 4, my touchiPod 4, and all of our laptops are working just fine on the router. When I dropped my kid off at school today, I noticed that I am not even seeing the school network anymore from the parking lot where before I got 3 or 4 bars and could connect to their wifi when I was there. Today my phone goes back and forth between seeing my home network but not connecting, to not even seeing the network at all even from the same room that the router is in.
Hope Apple fixes this problem soon..............

HT4314 Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. Then I playing game I

Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. Then I playing game I can see what someone else trying connecting to my game And I don't know what to do.So if you can help me please? I don't wanna lose my game.

Contact iTunes
Contact iTunes

Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. Then I playing game I can se

Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. When I playing game I can see what someone else trying connecting to my game And I don't know what to do.So if you can help me please? I don't wanna lose my game.

Hello Vaidas Vaidas,
It sounds like you are noticing someone else is accessing your Clash of Clans data by playing the game and you have tried to reset your Apple ID password. If you are following the steps outlined in this article:
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
What is preventing you from changing your password? Any error messages or prompts?
Thank you for using Apple Support Communities.
All the best,
Sterling

I have a VGA adapter and an iPad2. Tried projecting my iPad2 to projector using the VGA but doesn't work. Tried it with friend's iPad1 and it works. Why??

I have a VGA adapter and an iPad2. Tried projecting my iPad2 to projector using the VGA but doesn't work. Tried it with friend's iPad1 and it works. Why?? Pls help.

Yup - nothing happens. I then took the same VGA cable and plugged it into my friend's iPad1 and it worked perfectly when she opened Keynote. My understanding is that the iPad2 mirrors the entire screen, so no need to go into any specific application in order to project to the screen, right? Do I need to download any specific app or change any settings in order to be able to project the screen using VGA?
Sorry - novice at this. Not very tech minded either...

Works locally, but error when put online

hi,
I compiled the stratus sample and put it on my own server.
I can connect to the stratus.adobe.com for both local de-bug and visiting by browser on the server. But I failed to have key exchange for the deployed one, while it works successfully for the de-bug on locally.
How it comes? Also, I can use the application well on Firefox, but not work in IE for the same application.
So strange, anyone can help?
Thanks,
Bob

My best guess is that you are coming across a security sandbox violation - AKA a crossdomain scripting error.
This means that you need a crossdomain.xml on the root of your web-host that allows "whichpartyshouldivotefor.co.uk"

Asp site work local but doesn't work after upload to the server

Similar Messages

Maybe you are looking for