Assembly at customers site
hi
PP gurus
My client is a construction equipment manufacturing company and he will give subcontracting to many vendors and he wants to assemble the final assembly at the customer site.
Please throw some light on how to map this.
Thanks in advance
Ravi
The scenario that I suggest have:
- Create a SLoc in your Plant but with the address of your customer.
- Sending components to subcontractor that will produce the subassemblies, Position L in Purchase Order ; these SC will send their products to the SLoc.
- Vendors supplying components will have Sloc as the delivery address.
- Create a WC and a routing for the final assembly; BoM for the final product will have components and subassemblies.
- Create a production order
- Produce the Assembly with a production order at your customer.
Regards
Similar Messages
-
Hi all,
Kindly help me to know,
For providing service at customer site, some of machiwnes have to be taken to customers site, how the masters has to be maintained & how the machienes movement should be done to customers site & recieving back to factory.Hi,
One standard SAP option would be the consignment process. Many beverage companies use this process for their coffee machines at clients' sites.
More doc available under:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/70/a7853478616434e10000009b38f83b/frameset.htm
Regards
Nikhilesh -
Site to Site VPN between ASA 5505 and Juniper SSG140 no traffic
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
switchport access vlan 3
interface Ethernet0/2
switchport trunk allowed vlan 20-21,24,28,212-214,227,232-236,254-256
switchport mode trunk
interface Ethernet0/3
switchport trunk allowed vlan 20-21,24,28,212-214,227,232-236,254-256
switchport mode trunk
interface Ethernet0/4
switchport trunk allowed vlan 20-21,24,28,212-214,227,232-236,254-256
switchport mode trunk
interface Ethernet0/5
switchport trunk allowed vlan 20-21,24,28,212-214,227,232-236,254-256
switchport mode trunk
interface Ethernet0/6
switchport trunk allowed vlan 20-21,24,28,212-214,227,232-236,254-256
switchport mode trunk
interface Ethernet0/7
switchport access vlan 250
interface Vlan2
nameif outside
security-level 0
ip address 81.XXX.XXX.XXX 255.255.255.252
interface Vlan3
nameif OUTSIDE_BACK
security-level 0
ip address 41.XXX.XXX.XXX 255.255.255.248
interface Vlan20
nameif XXX
security-level 80
ip address 10.143.0.1 255.255.255.0 standby 10.143.0.2
interface Vlan21
nameif XXX
security-level 90
ip address 10.143.1.1 255.255.255.0 standby 10.143.1.2
interface Vlan24
nameif XXX
security-level 80
ip address 10.143.4.1 255.255.255.0 standby 10.143.4.2
interface Vlan28
nameif XXX
security-level 80
ip address 10.143.8.1 255.255.255.0 standby 10.143.8.2
interface Vlan212
nameif SELF
security-level 80
ip address 10.143.12.1 255.255.255.0 standby 10.143.12.2
interface Vlan213
nameif XXX
security-level 80
ip address 10.143.13.1 255.255.255.0 standby 10.143.13.2
interface Vlan214
nameif BIOFR
security-level 80
ip address 10.143.14.1 255.255.255.0 standby 10.143.14.2
interface Vlan232
nameif MNGT
security-level 80
ip address 10.143.32.1 255.255.255.0 standby 10.143.32.2
interface Vlan233
nameif XXX
security-level 80
ip address 10.143.33.1 255.255.255.0 standby 10.143.33.2
interface Vlan234
nameif XXX
security-level 80
ip address 10.143.34.1 255.255.255.0 standby 10.143.34.2
interface Vlan235
nameif XX
security-level 80
ip address 10.143.35.1 255.255.255.0 standby 10.143.35.2
interface Vlan236
nameif XXX
security-level 80
ip address 10.143.36.1 255.255.255.0 standby 10.143.36.2
interface Vlan250
description LAN Failover Interface
interface Vlan254
nameif TEST
security-level 80
ip address 10.143.254.1 255.255.255.0 standby 10.143.254.2
interface Vlan255
nameif XXX
security-level 100
ip address 10.143.255.1 255.255.255.0 standby 10.143.255.2
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network XXX
subnet 10.143.14.0 255.255.255.0
object network XXX
subnet 10.143.35.0 255.255.255.0
object network XXX
subnet 10.143.1.0 255.255.255.0
object network MGMT
subnet 10.143.32.0 255.255.255.0
object network XXX
subnet 10.143.36.0 255.255.255.0
object network XXX
subnet 10.143.4.0 255.255.252.0
object network XXX
subnet 10.143.33.0 255.255.255.0
object network ACCT
subnet 10.143.34.0 255.255.255.0
object network XXX
subnet 10.143.0.0 255.255.255.0
object network XXX
subnet 10.143.8.0 255.255.255.0
object network XXX
subnet 10.143.12.0 255.255.255.0
object network XXX
subnet 10.143.37.0 255.255.255.0
object network TEST
subnet 10.143.254.0 255.255.255.0
object network XXX
subnet 10.143.255.0 255.255.255.0
object network NETWORK_OBJ_10.143.0.0_16
subnet 10.143.0.0 255.255.0.0
object network NETWORK_OBJ_10.91.0.0_16
subnet 10.91.0.0 255.255.0.0
object-group network vpn-local-network
network-object 10.143.14.0 255.255.255.0
network-object 10.143.35.0 255.255.255.0
network-object 10.143.1.0 255.255.255.0
network-object 10.143.32.0 255.255.255.0
network-object 10.143.36.0 255.255.255.0
network-object 10.143.4.0 255.255.255.0
network-object 10.143.33.0 255.255.255.0
network-object 10.143.34.0 255.255.255.0
object-group network vpn-remote-network
network-object 10.112.0.0 255.255.0.0
access-list ACL_VPN extended permit ip 10.143.0.0 255.255.0.0 10.112.0.0 255.255.0.0
access-list ACL_INSIDE_NONAT extended permit ip 10.143.0.0 255.255.0.0 10.112.0.0 255.255.0.0
access-list PING extended permit icmp any any
access-list PING extended permit icmp any any object-group ALLOW_PING
pager lines 24
logging asdm informational
mtu outside 1500
failover
failover lan unit primary
failover lan interface FAILOVER Vlan250
failover interface ip FAILOVER 10.143.250.1 255.255.255.0 standby 10.143.250.2
no monitor-interface outside
no monitor-interface OUTSIDE_BACK
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-721.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (XXX,outside) source dynamic XXX interface
nat (XXX,outside) source dynamic XXX interface
nat (XXX,outside) source dynamic XXX interface
nat (XXX,outside) source dynamic XXX interface
nat (XXX,outside) source dynamic XXX interface
nat (XXX,outside) source dynamic XXX interface
nat (XX,outside) source dynamic XXX interface
nat (XXX,outside) source dynamic XXX interface
nat (XXX,outside) source dynamic XX interface
nat(IT,outside) source dynamic IT interface
nat (TEST,outside) source dynamic TEST interface
nat ( IT,outside) source dynamic IT interface
nat (TEST,outside) source static vpn-local-network vpn-local-network destination static vpn-remote-network vpn-remote-network no-proxy-arp route-lookup
access-group PING in interface outside
access-group PING in interface OUTSIDE_BACK
route outside 0.0.0.0 0.0.0.0 81.XXX.XXX.XXX.XXX 1 track 1
route OUTSIDE_BACK 0.0.0.0 0.0.0.0 41.XXXX
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
no snmp-server location
no snmp-server contact
sysopt connection preserve-vpn-flows
sla monitor 123
type echo protocol ipIcmpEcho 41.xxx.xxx.xxx interface outside
frequency 10
sla monitor schedule 123 life forever start-time now
crypto ipsec ikev1 transform-set ESP-3DES-ESP-MD5-HMAC esp-3des esp-md5-hmac
crypto ipsec security-association pmtu-aging infinite
crypto map TEST 1 match address ACL_VPN
crypto map TEST 1 set peer 194.XXX.XXX.XXX
crypto map TEST 1 set ikev1 transform-set ESP-3DES-ESP-MD5-HMAC
crypto map TEST 1 set security-association lifetime seconds 86400
crypto map TEST 1 set security-association lifetime kilobytes 2147483647
crypto map TEST interface outside
crypto ca trustpool policy
no crypto isakmp nat-traversal
crypto ikev1 enable outside
crypto ikev1 policy 1
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
track 1 rtr 123 reachability
telnet timeout 5
ssh stricthostkeycheck
ssh 10.143.255.0 255.255.255.0 IT
ssh timeout 10
ssh key-exchange group dh-group1-sha1
console timeout 60
management-access IT
dhcpd lease 60000
dhcpd ping_timeout 20
dhcpd domain tls.ad
dhcpd auto_config outside
dhcpd address 10.143.4.10-10.143.4.200 XXX
dhcpd dns 10.91.0.34 8.8.8.8 interface XXX
dhcpd option 3 ip 10.143.4.1 interface XXX
dhcpd enable XXX
dhcpd address 10.143.12.10-10.143.12.200 XXX
dhcpd option 3 ip 10.143.12.1 interface XXX
dhcpd enable XXX
dhcpd address 10.143.14.10-10.143.14.200 XXX
dhcpd option 3 ip 10.143.14.1 interface XXX
dhcpd enable XXX
dhcpd address 10.143.32.10-10.143.32.100 MNGT
dhcpd option 3 ip 10.143.32.1 interface MNGT
dhcpd enable MNGT
dhcpd address 10.143.33.10-10.143.33.100 XXX
dhcpd option 3 ip 10.143.32.1 interface XXX
dhcpd enable XXX
dhcpd address 10.143.34.10-10.143.34.100 XXX
dhcpd option 3 ip 10.143.32.1 interface XXX
dhcpd enable XXX
dhcpd address 10.143.36.10-10.143.36.100 XXX
dhcpd option 3 ip 10.143.32.1 interface XXX
dhcpd enable XXX
dhcpd address 10.143.255.10-10.143.255.200 XXX
dhcpd option 3 ip 10.143.255.1 interface XXX
dhcpd enable IT
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp authenticate
ntp server 10.90.0.34
ntp server 10.91.0.34
ssl encryption rc4-sha1 aes128-sha1 aes256-sha1 3des-sha1
group-policy DfltGrpPolicy attributes
vpn-idle-timeout none
vpn-tunnel-protocol ikev1 l2tp-ipsec ssl-clientless
username tlsnimda password OW03yrp6/wvkyg6E encrypted
tunnel-group 194.XXX.XXX.XXX type ipsec-l2l
tunnel-group 194.XXX.XXX.XXX ipsec-attributes
ikev1 pre-shared-key *****
class-map icmp
match default-inspection-traffic
policy-map icmppolicy
class icmp
inspect icmp
service-policy icmppolicy interface outside
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:e820e629c3cbaf67478c065440ac8138
VPN is up but not passing any traffing
Crypto map tag: TEST, seq num: 1, local addr: 81.xxx.xxx.xxx
access-list ACL_VPN extended permit ip 10.143.0.0 255.255.0.0 10.112.0.0 255.255.0.0
local ident (addr/mask/prot/port): (10.143.0.0/255.255.0.0/0/0)
remote ident (addr/mask/prot/port): (10.112.0.0/255.255.0.0/0/0)
current_peer: 194.xxx.xxx.xxx
#pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0
#pkts decaps: 10, #pkts decrypt: 0, #pkts verify: 0
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 0, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#TFC rcvd: 0, #TFC sent: 0
#Valid ICMP Errors rcvd: 0, #Invalid ICMP Errors rcvd: 0
#send errors: 0, #recv errors: 10
local crypto endpt.: 81.xxx.xxx.xxx/0, remote crypto endpt.: 194.xxx.xxx.xx/0
path mtu 1500, ipsec overhead 58(36), media mtu 1500
PMTU time remaining (sec): 0, DF policy: copy-df
ICMP error validation: disabled, TFC packets: disabled
current outbound spi: CC4FACB7
current inbound spi : D8C0AC76
inbound esp sas:
spi: 0xD8C0AC76 (3636505718)
transform: esp-3des esp-md5-hmac no compression
in use settings ={L2L, Tunnel, IKEv1, }
slot: 0, conn_id: 9367552, crypto-map: TEST
sa timing: remaining key lifetime (kB/sec): (1824522239/3507)
IV size: 8 bytes
replay detection support: Y
Anti replay bitmap:
0x00000000 0x00000001
outbound esp sas:
spi: 0xCC4FACB7 (3427773623)
transform: esp-3des esp-md5-hmac no compression
in use settings ={L2L, Tunnel, IKEv1, }
slot: 0, conn_id: 9367552, crypto-map: TEST
sa timing: remaining key lifetime (kB/sec): (1824522239/3507)
IV size: 8 bytes
replay detection support: Y
Anti replay bitmap:
0x00000000 0x00000001
VPN is unstable
Connection terminated for peer 194.XXX.XXX.XX. Reason: Peer Terminate Remote Proxy 10.112.0.0, Local Proxy 10.143.0.0
I cannot pass any traffic through the vpn when it's UP, or ping the other side.
ASA VERSION 9.2I do not think that'll be any problem. Here at work we also use Cisco ADSL 800 Series with vpn between customers' sites without any issues. The ASA should vpn for sure.
-
Dear All ,
I want to capture the cost of the work caried out at my customers site by employees of my company.
I have near about 100 sites at present and my project tenure is about 2 to 3 years
How can i collect the cost similar to the production order in my plant.
Shall I define the plants for each and every site?
Replies will be highly appreciated.
Regards,
MandarDear Mandar,
1. The request you have posted here, needs a larger discussion interms of integeration with other modules, configuration, Master data Etc.
2. A simple solution is that you can have cost centres to collect the same at the customer leve.
3. This will be simpler, but again it needs to be validated with what cost you are planning to collect and how.
4. Defining a plant alone will not resolve your problem, plant is only a organisationa entity- cost are collected at Cost centres only.
Reg
Dsk -
Hello folks.
Iprint works perfectly in house. Our internal network sits behind
a BM3.8 firewall. I'm trying to download the iprint client from a
customers site but keep getting a winsock error 10060. The clients
site is also behind a BM3.8 firewall.
What port exceptions do I need to create on our BM server and the
customers BM server to get this to work? Basically I just need the
port numbers required outbound from the Client site, and inbound
at our site. 631, 515 is there anything else that would relate to
the 10060 winsock error? I get that error when trying to download
the driver. The web page is up, I have downloaded the client and
installed, but cannot pull the driver?
Thanks for your help.
Martin Stepanek
martin@image"Hyphen"technology"DOT"com (
'mailto:martin@image"Hyphen"technology"DOT"com' )
www.image-technology.comAh yah sir, I did a find the cure!
It wasn't packet filtering nor generic proxy. It was in fact on
page "uh let me thing...uhhhhh, possum, uh dinosaur..ahhhh, no
what page was that on? Ding dang, it was either 14 or 17 of the
iprint administators guide.
Any case, notice when attempting to install the drivers remotely
(or internally for that matter) that the ipp url was an internal
ip address. Couldn't change that in edir so looking at the manual
again I found this little note suggesting to start the ndps
manager with the /dnsname switch. ex: Load ndpsm
..manager.domain.com /dnsname=server.domain.com . The manual
suggesting setting up a dns record for the print manager but I
figured if its mapping to the same IP as the server name then lets
use the server name. That should work and voila.
caio
>>> On 7/29/2006 at 10:10 AM, in message
<[email protected]>, Martin
Stepanek<[email protected]> wrote:
> Hello folks.
>
> Iprint works perfectly in house. Our internal network sits
> behind
> a BM3.8 firewall. I'm trying to download the iprint client
> from a
> customers site but keep getting a winsock error 10060. The
> clients
> site is also behind a BM3.8 firewall.
>
> What port exceptions do I need to create on our BM server and
> the
> customers BM server to get this to work? Basically I just need
> the
> port numbers required outbound from the Client site, and
> inbound
> at our site. 631, 515 is there anything else that would relate
> to
> the 10060 winsock error? I get that error when trying to
> download
> the driver. The web page is up, I have downloaded the client
> and
> installed, but cannot pull the driver?
>
> Thanks for your help. -
OracleAS Web Cache Architecture - Web Cache placed at Customer site
Thanks In advance for all your support.
What I am looking for is an WebCache technical architecture slide where WebCache is placed at the customer sites and connecting to the APPS server @Oracle ADC.
If you would have this information great or if you could provide any other place or person that I may contact that could provide this information, this would be greatly appreciated.
Thanks -- GaryHi Gary!
In theory it does not matter where you place the webcache. However you need to make sure that the connection between the webcache and the origin server is encrypted using SSL (HTTPS).
I would suggest not to set the webcache system at the customers site. Who is going to manage the box? Who is responsible for it?
cu
Andreas -
Patch 11 now available for download
As you can see, patch 11 contains many many fixes and some new functionality. Thanks to everyone on the SDN for contributing!
Highlights
- Login name now able to be edited by either user or merchant
- Orders placed for the Internal BP, containing the sales people, users, etc from B1 will no longer synch and a message will show in the synchlog
- Several fixes to opportunities
- Install plugin button appends stored proc instead of overwrite
Fixes include:
Note#
[1242678 - Added support for Switch, Maestro and Solo|https://service.sap.com/sap/support/notes/1242678]
[1242677 - My Account->Account Transactions do not show current day |https://service.sap.com/sap/support/notes/1242677]
[1242675 - Opportunity conntact list does not refresh on BP change |https://service.sap.com/sap/support/notes/1242675]
[1242674 - Web Tools license error randomly appeares on website |https://service.sap.com/sap/support/notes/1242674]
[1242673 - Displayed document type is wrong on doc linked to activity |https://service.sap.com/sap/support/notes/1242673]
[1242612 - Search returns incorrect number of results |https://service.sap.com/sap/support/notes/1242612]
[1242611 - Tentative checkbox on meeting activity does not synch |https://service.sap.com/sap/support/notes/1242611]
[1242608 - WT throws error if no industry is specified on prospectmerge|https://service.sap.com/sap/support/notes/1242608]
[1242607 - Reminder on activity is incorrectly synchronized |https://service.sap.com/sap/support/notes/1242607]
[1242605 - Activity linked to opportunity to B1 corrupted B1 database |https://service.sap.com/sap/support/notes/1242605]
[1242604 - Calendar control in Today->Pending activities does not work |https://service.sap.com/sap/support/notes/1242604]
[1242592 - Termination date of service contract is set after synch |https://service.sap.com/sap/support/notes/1242592]
[1242590 - Website times out by Request timed out error |https://service.sap.com/sap/support/notes/1242590]
[1242521 - Updating opportunity with more stages in B1 fails to synch |https://service.sap.com/sap/support/notes/1242521]
[1242518 - Page ~/admin/focus/OrderDetail.aspx should be removed|https://service.sap.com/sap/support/notes/1242518]
[1242516 - Related document on opportunity does not work on sych WT->B1|https://service.sap.com/sap/support/notes/1242516]
[1242514 - SECURITY Dangerous component exists on WT instance |https://service.sap.com/sap/support/notes/1242514]
[1242471 - WeightTotalUnitCode added twice on upgrade from patch 8|https://service.sap.com/sap/support/notes/1242471]
[1242470 - Malfunctioning paging navigator (Campaign Report Detail) |https://service.sap.com/sap/support/notes/1242470]
[1242468 - Coupon without any requirements defined isn't accepted |https://service.sap.com/sap/support/notes/1242468]
[1242467 - Coupon limit per user does not work if user was logged out |https://service.sap.com/sap/support/notes/1242467]
[1242466 - User can view documents linked to another BP |https://service.sap.com/sap/support/notes/1242466]
[1242401 - Field ZIP is not required on address detail of BP in WT |https://service.sap.com/sap/support/notes/1242401]
[ 1242400 - Last visit on user is displayed twice |https://service.sap.com/sap/support/notes/1242400]
[1242399 - Full Name password synch does not work for sales person |https://service.sap.com/sap/support/notes/1242399]
[1242398 - Objects synching one way cannot be used in a synch plugin |https://service.sap.com/sap/support/notes/1242398]
[1242396 - Delivery date on Quote incorrectly set on synch from B1->WT|https://service.sap.com/sap/support/notes/1242396]
[1242338 - Priority and Source of Opportunity are not synchronized|https://service.sap.com/sap/support/notes/1242338]
[1242336 - Synch overwrites code for opportunity competitor |https://service.sap.com/sap/support/notes/1242336]
[1242335 - Base price not considered for pricelist with empty price|https://service.sap.com/sap/support/notes/1242335]
[1242106 - Bounce report was not updated if failed email returned |https://service.sap.com/sap/support/notes/1242106]
[1242105 - Create Activity on Opportunity redirects to incorrect page|https://service.sap.com/sap/support/notes/1242105]
[1242082 - Adding linenote to order before saving row raises error |https://service.sap.com/sap/support/notes/1242082]
[1242081 - Several strings have been corrected in application |https://service.sap.com/sap/support/notes/1242081]
[1242078 - Item groups is incorrectly assgined to item on update in WT |https://service.sap.com/sap/support/notes/1242078]
[1242077 - Quantity field missing on Quantity list category type |https://service.sap.com/sap/support/notes/1242077]
[1242075 - Quotation total does not update when updating quantity|https://service.sap.com/sap/support/notes/1242075]
[1242001 - Web Tools does not allow to change login name synched as ID |https://service.sap.com/sap/support/notes/1242001]
[1242000 - WebTools raises error on purchases on internal account |https://service.sap.com/sap/support/notes/1242000]
[1241999 - Clicking Install Plugin can break other installed addons|https://service.sap.com/sap/support/notes/1241999]
[1241998 - Link between activity and service call is lost in WT|https://service.sap.com/sap/support/notes/1241998]
[1241996 - Tax should not be applied to handling on synch from WT->B1|https://service.sap.com/sap/support/notes/1241996]
[1241805 - Web UserID is not set correctly after synchronization|https://service.sap.com/sap/support/notes/1241805]
[1241752 - Change of user's e-mail doesn't update contact list |https://service.sap.com/sap/support/notes/1241752]
[1241750 - Shipment notification email not sent|https://service.sap.com/sap/support/notes/1241750]
[1241749 - New address on Quote is not correct when saved|https://service.sap.com/sap/support/notes/1241749]
[1241747 - Cannot reassign service call from queue to user in WT|https://service.sap.com/sap/support/notes/1241747]
[1241665 - Install Plugin is enabled when there is no connection to B1 |https://service.sap.com/sap/support/notes/1241665]
[1241600 - New checkbox to calculate sales BoM as assembly on Web Site|https://service.sap.com/sap/support/notes/1241600]
[1226689 - Threat Level of competitors from B1 is not synched to WT|https://service.sap.com/sap/support/notes/1226689]Please be aware that in patch 11 the requirement that a delivery have a tracking number associated with it was lifted per multiple customer requests. Meaning, all deliveries that synch to web tools from B1 will trigger the messaging service to send a delivery notification if so enabled.
So, if you have deliveries in B1 that have no tracking number on them, when they synch to Web tools they will send the delivery confirmation email. Basically any delivery that exists in Web tools that does not have a tracking number has never been sent, and after patch 11 will be sent, so you may end up sending delivery confirmations to your customers for orders that were placed years ago.
Obviously this is not good. What you can do is use a local smtp server, which is recommended anyways, and monitor the pickup folder for emails that would be sent out. Pause the local smtp server BEFORE you upgrade to patch 11, watch the pickup directory and manually delete any emails that you don't want to go out.
As there may be a large number of emails that you do not wish delivered, you may wish to perform a search on that folder for files containing the text of the undesired emails, such as "Your order has been shipped". Move those emails to a seperate folder, then search for any emails that do not contain the current date, or the dates that you know delivery notifications have not been sent for. A great tool for this is Total Commander, and it's free.
There is also a switch in the Admin - config settings - messaging page that you can use to disable the sending of shipment notifications entirely. But make sure you restart the messaging service after you change this setting as the old setting might be cached in the service. -
In MTO VC scenario, how to deliver subassemblies separately from a sales order
Finished good has two sub-assemblies for the main assembly. The main assembly is not an assembly actually but Customer orders it as Assembled component of Subassembly 1 And Sub assembly 2. There are cases where Sub assemblies can be shipped separately which are then assembled at the Customer Site.
Main FG product and sub-assemblies are both Configurable materials.
In the above scenario which MRP strategy is more suitable and how to dispatch individual subassemblies separately.
Also there should be option to produce subassembly separately if the need arises.
Ex: Box assembly is made of Lid & Pan. All the 3 materials are configurable as per Customer requirement.
Customers order for Box assembly in the sales order
Need to know which is most suitable strategy which can satisfy below req's
1. Box can be produced as assembly and dispactched
2. Lid and Cover can be produced separately and can be assembled at Customer site
3. Delivery of individual LId and cover can be made separately
4. Production order creation should be possible for Box, Lid or Pan separatelyRepeating answer since Q is duplicated in two forums:
Hi There,
are you sure that your Item A is a genuine Pick To Order? - I would think that a PTO would result in exploding the OM Line to separate lines for the components and when they are ATO's they individually would result in WIP Jobs.
Anyway once the toplevel Item is resulting in a WIP job the only mechanism for creating the remaining component jobs are via an MRP breakdown done by the classical MRP or ASCP planning run.
To tie the different jobs together (hard-pegging) you would have to look at Project MFG (PJM) e.g. in the simple version of SEIBANs.
/Niels LM -
REPORT SERVER 6i Patch1 PRINTING BLANK PAGES
I have a problem that is occouring on three different report servers. It will start printing blank pages instead of the report and the only way to get it back to normal is to stop and reastart the service. I get this on a version 6, version 6i and version 6i patch1 report servers. It makes no difference what call method I use (command line or OCX control). I can also force this behavior on one of the servers by selecting a HP 895C as the default printer in the windows printers and then starting the service. All pages print blank after that. At the customers site it appears to be random as to when it will start printing the blank pages.
Any ideas on what the fix is for this?
nullIs there any ideas on this?
We have a Reports 6i server up and running and I'm getting stuff out OK to postscript printers, but some HP older printers are just spitting out blank pages. Is there a desformat= that I need to set differently? I've tried most of the options ( dec, psport, psland, hpl... all blank )
Appreciate any help, I haven't used this stuff long, so am quite naive about how it hangs together.
null -
Print Layourt Designer how to migrate a report from one SBO to another
I have written a report on my Test version of SBO and need to migrate it to the customers site but cant see a method of exporting/Importing a User Report
(I am probably missing something obvious though.....) but would appreciate a prod in the right direction. thanksHi George,
There is two ways, you can either copy it over......but sometimes all the alignment goes off.
Or you can use the query SAP have given in a note. I do not remember the note number. But here is an extract of the note. I use this query often and have kept this extract one side. It only copies the layouts that do not exist in the destination company. Here is the extract.
An SQL query can be used to copy documents from one database to another, however the following conditions must be met:
1. Only edited documents with a doccode (the template primery key), which does not exist in the destination database, will be copied.
2. It is necessary to backup source and destination databases before running the query!!!
3. Both databases must share the same localization and the same version!!!
4. Select "Start" -> "Programs" -> "Microsoft SQL Server" -> "Query Analyzer" and run the following query:
Replace SOURCE with the source database name.
Replace DEST with the destination database name.
insert into [DEST].[dbo].[RDOC]
select [SOURCE].[dbo].[RDOC].*
from
[SOURCE].[dbo].[RDOC],[DEST].[dbo].[cinf],[SOURCE].[dbo].[cinf]
where [DEST].[dbo].[cinf].[lawsset]=[SOURCE].[dbo].[cinf].[lawsset]and [DEST].[dbo].[cinf].[version]=[SOURCE].[dbo].[cinf].[version] and [SOURCE].[dbo].[RDOC].[Doccode]NOT IN (SELECT Doccode from [DEST].[dbo].[RDOC])
insert into [DEST].[dbo].[RITM]
select [SOURCE].[dbo].[RITM].*
from [SOURCE].[dbo].[RITM],[DEST].[dbo].[cinf],[SOURCE].[dbo].[cinf] where [SOURCE].[dbo].[RITM].[Doccode] NOT IN (select Doccode from [DEST].[dbo].[RITM])AND [SOURCE].[dbo].[RITM].[Doccode]IN (SELECT Doccode from [DEST].[dbo].[RDOC])
The query is also attached to this note!
Hope this helps. -
Creative Zen Vision M question!
Creative Zen Vision M question!?Hey guys, I'm not from US but I hope you will understand my english anyway .
So here's my question:
Is there any legal way to get one of "creative zen vison m" players? I prefer new products... 60gb would be awesome..
Since Im fed up with Apple and got already n Touch i simply want a player with a good capacity and just to listen to music... and i pretty much liked the creative zen vision m player... more than any new product from creative... all of em are more like multimedia and not "classy"....
Furthermore I just find the product over google at customers site... if i browse all mp3players from creative I cant find the product i want.... It would be awesome if anyone knows a way to get a new one of these... and it would be kickass if it could get delieverd to EU/Austria
At the end, thx for all the upcoming posts n answers and a picture of the desired product:
<a rel="nofollow" target="_blank" href="http://img.tomshardware.com/de/2006/02/06/zen_vision_m_creative_antwort_auf_den_ipod/vision02.jpg"]http://img.tomshardware.com/de/2006/02/06/zen_vision_m_creative_antwort_auf_den_ipod/vision02.jpg[/url]really? :/ I dont like ebay and would prefer a new product... is there no other solution? Like writing to the customers and make out a good price for em to get a new of zen vision m?
Otherwise, i know it doesnt fit here, but does any knows an "classy" player with about 30-60gig... like ipod classic, just for music n maybe photos... I dont need any multimedia .. got touch already...
If anyone knows a good one which looks nice post here, would be awesome
(I hope asking for other brands is allowed :S, otherwise sorry) -
SolMan 4.0: Support Team determination via Access Sequence not working
Hi,
from all the documentation I've read I got the following understanding for automatically determination of Support Team via Access Sequence (well, for one possibillity at least):
- Maintain Sold-to-Party in IBase IB52, especially country attribute. DONE
- Maintain Organizational Structure in PPOMA_CRM and create Org. Units, Business Partner No. get assigned automatically. DONE
- The Organizational Unit "Support Team" has the same country attribute as the Sold-to-Party and was marked "Obj. Permitted in Determination". DONE
- In IMG under SolMan -> Sc.-Specific Settings -> Partner Det. Proc. -> Def. Partner Det. Procedure select Procedure "SLFN0001" -> Partner Functions in Procedure -> Select "Support Team" -> Details, in block "Partner Determination" under "Access Sequence" select "Organizational data: Support Team by org. model". DONE
If I now create a support message in a satellite system the Support-Team will NOT be assigned. Instead if I have a look into transaction data of the message under tab "Actions" there is an entry "When message is created, find support team responsible" with processing parameters RULE AC13200137, PARTNER_FCT SLFN0003.
This makes absolutely no sense to me, why is the determination rule 13200137 used (which contains no entries at the moment) instead of the assigned Access Sequence?
Am I missing something?
Regards,
Marco KipkaHi,
no hint for solving the problem?
This is getting quite urgent, since I'm working at a customers site and try to implement the describted scenario.
Regards,
Marco -
Windows 7 Client 'sees' an old version of windows 2012 server share
Hi All,
I have a problem which seems to be a common theme looking at other threads. Here's the overview of the problem:-
I have multiple windows 7 clients and a windows 8.1 client within a 2008 Server in a domain.
I also have a Windows 2012R2 Server which is not joined to the domain. There is a Share on the 2012R2 which has the Caching Option turned off. Everyone full control on Share & File permissions.
One of the Windows 7 machines in Explorer when it looks at
\\2012server\share sees an old version of the folder. It seems that SMB 2 chaching is working too well. Not even pressing F5 or clicking View, Refresh updates windows explorer.
It took a reboot to get the workstation to see the up to date contents of the share on the 2012 server.
We don't seem to have that behaviour with that client against the 2008 server.
I have seen this behaviour on another machine un-related to us at another location which was in a workgroup with a 2012 server and no domain.
Questions:-
Is there some sort of problem with Windows 7 workstations working against 2012 Servers in a non-domain setting or is it just Windows 7 against 2012 servers period?
I understand that Windows 7 utilises SMB1 & SMB2. SMB2 introduced caching. If the server has turned off the share cache option should the client cache the contents of the share or the information about the files & folders & 'file not found'
information?
I want to open a file handle to a file on a network share so I can read and write data to it. But I also want to know that when I look at the folder to open the file I'm actually looking at the live version of the folder and files in the folder and
not a cached version of the folder. If it's a cached version the file might be there already but I won't see it.
Is there an API call that tells the client to get a fresh view of the server share so I can be absolutely sure that when I look for a file on the server I'm getting the correct answer and not one from cache.
I first posted the question with the same subject "Windows 7 Client 'sees' an old version of windows 2012 server share" in the Windows 7 Networking Fourm
https://social.technet.microsoft.com/Forums/en-US/23bf3627-987b-4c27-8062-85a284a2cda4/windows-7-client-sees-an-old-version-of-windows-2012-server-share?forum=w7itpronetworking and it was suggested I repost in here. Please do take the time to read
the thread which will save time with suggestions that have already been covered.
As the computers that can be affected by this problem are not mine I cannot enforce or guarantee that any of my 'client base' will apply any hotfixes. I will also not have the ability to tweak registry settings as I can't guarantee Admin Access.
It seems that we need to go back to SMB1 as all the tweaks to SMB since those days have introduced problems with the basic requirement of sharing files from a share on a server for Read/Write purposes. I have tried turning a network back to SMB1 and that
has resolved a lot of the issues but then I found a post/MS blog that states not to leave the network on SMB1
The Caching option of the share had already been turned off. Surely Windows clients should not cache any information about the share but I think that is not the case.
Thanks is advance
RobertHi Shaon,
Thanks for looking into this.
If this is a known issue, why isn't the hotfix rolled into a general windows update if this is a known problem? However this doesn't just affect domain joined workstations.
Surely it's basic functionality for a networked computer to access files and folders on a network file server. It's what networks were invented for at the end of the day.
I am unable to apply hotfixes to these computers that are having the problem due to the fact they are not mine but my customers.
At one of my customers sites I disabled SMB2 from the server and network clients as well as disabling the network adapter power saving option. This seemed to resolve the issues that I saw on one client that seemed to be 30 minutes behind the rest of
the network. The hotfix you link to states that it is for Domain joined computers. At my customer site the PC's are not in a domain at all, just a workgroup with workstations and a 2012r2 server. Will the hotfix be applicable to non-domain machines?
Also many clients seemed to loose the file handle to an open file on the server. I'll get them to turn SMB2 back on at some point after I send out some updates but all the problems I see seem to be caused by the caching functions in SMB2. SMB1 is good and
stable. It's SMB2 that seems to be causing the problems as it was designed from the ground up for caching.
Has this networking issue been resolved in Windows 8, 8.1 and 10?
As I am unable to apply a hotfix to 1000's of PC's that are not mine, is there an API call or something where I can get the windows client to stop lying and get me the current state of a folder on the server?
Will Turning off ClientSideCaching fix the issue? HKLM\SYSTEM\CurrentControlSet\Services\MrxSmb\Parameters\
CSCEnabled
Or will every machine need to be tuned individually according to the following guide:-
https://social.technet.microsoft.com/Forums/windowsserver/en-US/7bd9978c-69b4-42bf-90cd-fc7541ccb663/forum-faq-troubleshooting-network-file-copy-slowness?forum=winserverPN ?
Robert -
I am developing an AWR analysis tool...
Hi,
I am looking for help with Beta testing a tool that I am developing to analyze Oracle AWR reports (HTML format), produce graphs to assist in finding trends and correlations between the data.
What I can offer is if you can send 2 or more AWR HTML reports (from the same system, up to 24 of them) I will return a HTML report which graphs the key metrics (Instance Summary, Instant Efficiency, Wait Events, Top SQL by (CPU, Wait Time, Elapsed Time), Instance Activity Stats (with correlations against User Calls and DB Calls). There is a caveat to this – the code is in beta, if the tool cannot process the exact format I will work to fix it so that I can generate the report, but I cannot promise any particular time line on this (it may be days or weeks) as I am using my spare time to develop this. My main focus at the moment is on the parsing of the reports, rather than the prettiness of the graphs.
This service is currently provided with no warranty at all, you MUST review all data yourself against your own data, in sending me the reports you release me from any obligations or legal commitments (if you rely solely on this and your nuclear reactor melts down – do not try to blame me!).
{If you can send me one AWR HTML report, I will use it just to improve my parsing, and you will receive my thanks.}
“This all seems a bit suspicious - who is this guy, why is he not even telling me his real name?” Well I guess I probably would be wondering a little about this also. So let me tell you a little about myself. I used to do Oracle performance tuning professionally and it was all I did for more than ten years. During that time I worked on some of Oracles largest OLTP and data warehouse systems. Then I joined a startup company working in a completely different field, and while I now have a nice management job I really miss the performance work. We do have some customers using our software on large Oracle clusters and occasionally I would get a call from Support to help work out what was going wrong on a customers site. This usually meant getting 10+ awr reports emailed to me and having to spend some time wading through them looking for trends, which lead me to become convinced that 1. there must be a better way of reading the reports and 2. I am sure I am not the only one who has to figure out what's going on on a system to which the only connection is a HTML AWR report. So I went away and did some dev and reached a minimally viable product that is ready for someone other than its “daddy” (who thinks the world of it) to either love it or tell me its ugly.
Some of you will be concerned about leaking information (instance names, host names, ip addresses, database structure from SQL (and even real data if your not using bind variables)). So if I get enough people saying “I like the idea of the tool, but I am scared your looking to hack my system” then I will produce (and open source, so you can inspect it) a tool to strip out anything that is likely to be dangerous prior to sending it to me.
Regards,
AWR Reader.>
I'm afraid what you are trying to do has already been done.
>
ASH is not AWR - it is a subset of AWR
Performance Tuning Guide
http://docs.oracle.com/cd/B28359_01/server.111/b28274/autostat.htm#i27008
>
The statistics collected and processed by AWR include:
•Object statistics that determine both access and usage statistics of database segments
•Time model statistics based on time usage for activities, displayed in the V$SYS_TIME_MODEL and V$SESS_TIME_MODEL views
•Some of the system and session statistics collected in the V$SYSSTAT and V$SESSTAT views
•SQL statements that are producing the highest load on the system, based on criteria such as elapsed time and CPU time
•Active Session History (ASH) statistics, representing the history of recent sessions activity -
Do I need to pay $99/year per employee just to test web pages on IOS simulator?
Hi there, I run a small web development shop with 5 employees. We all bought Xcode through the app store and have been using the iOS simulator to test web pages and troubleshoot problems with our customers sites on iPhones and iPads.
I just upgraded to Mountain Lion, and it seems I lost my iOS simulator. I tried to install it through XCode again, and it says I need a developer account, which is $99/year.
We don't develop apps, we just use the simulator to view websites locally and on the web. Does this mean if I want all of my employees to be able to just simply use the simulator to view web pages, that I have to pay $500 per year to Apple? Am I missing something here? Why could we use the simulator's basic features for free under Snow Leopard, but not under Mountain Lion with the new version of the simulator?
Please tell me I'm an idiot and am just missing something about how to install it or configure it. Thanks so much for your help!See, I am an idiot. It was right there. Somehow I think Alfred lost how to launch the simulator in the update to Mountain Lion. Since I couldn't launch it like I used to, I dug around until I found the Preferences > Downloads screen and had the option to install "iOS 5.0 Simulator" which is when I was prompted to get a developer license.
I never found the Xcode > Open Developer Tool method of locating it.
Anyway, thanks so much for your time!
Maybe you are looking for
-
Help! brand new Macbook Pro with snow leopard keeps dropping the WIFI connection
or can't pick it up at all. Router is fine, since all other computers and iphone have no problems. What to do?thanks for advice
-
Moving Time Machine to a new macbook
I've just bought the newest macbook to replace my first gen macbook. I copied stuff across as usual and Time Machine seems already to go. (My TM disk is at work so I can't tell). But surely I don't want it to just set off adding to the backup of my f
-
HT1459 slide bar doesnt work its like screen is locked
slide bar doesnt work its like screen is locked its old a second generation
-
Initial impression of 7200rpm 100GB Seagate drive; not good
I installed the Seagate Momentus 100GB 7200rpm drive into my 1.83Ghz MacBook, which has 2GB of GigaRam RAM from NewEgg. My MacBook came with the 60GB 5400rpm FUJITSU MHV2060BHPL. The first thing I noticed about the Seagate drive was how much vibratio
-
What are you supposed to do for users manual for the iPhone 5?
What or how do you get the user's manual for the iPhone 5?