Assembly Processing through Contract

Hi All,
Pl advise if its possible to trigger 'Assemblt Processing' through contract(Transaction VA41).
Thanks in advance

Hi
You can trigger assembly processing through sales order VA01.
Regards.
VaraPrasad.

Similar Messages

Reg Assembly Process

Hi Guru,
i would like to know the assembly Process with CIN details.
please give the details regarding the above.
Thanks
BR
siva

Hi Guru,
we are using the following process.
Direct Material
Prcourement from the supplier who are coming under VAT taxation
Procurement from supplier who are coming under CST taxataion
Procurement from the supplier where C form need to be given
Procurement from the Subcontracting Suppliers
Indirect material:
Service Procurement and relevant taxation
Consignement Procurement
Procurement from the supplier with account assignement purchase
Capital Goods
Capital Goods Procurement for Machineries
Capital Procurement for Machine accessories - Grinding wheel
Import
Procurement from other Plants
Procurement of Steel from Suppliers
Procurement of Capital Goods
Service Procurement for Tool Calibration
Pricing
Domestic pricing with Tax calculation
Option to edit the Tax condition type value in the PO
Option to enter the tax condition value or % in PO
Import Pricing to include the required condition of Excise and Govt requirement
Incoming Excise Invoice
Capture Excise Invoice During GR
Option to Edit the value after Excise Invoice Capture
Returnable Excise Invoice Form
Import Duty Capture and Excise Invoice posting
Registers
RG23A - Part I and Part 2 update
RG23C - Part I and Part 2 update
Cenvat Regeister
Sales Tax Regeister
Payment of tax to central and State - Separate GR posting
CIN Configuration Check list - PTP
Excise Registration
Check Excise Registration is updated for all plants
Check Excise Reg is updated with the Excise Range Information
Check Excise reg is updated with the ECC NO for all the plants
Check Excise Reg, Division and Range is maintained in Excise Reg
Plant Settings:
Check whether Excise Registration is assigned to plant or not
Check the manufactruing plant is unchecked with Depot Indicator
Check Multiple goods receipt/Multiple Credit option is set for Manufcaturing plants
Check the Depot plant has been flagged with Depot Indicator
Check Multiple goods receipt/Multiple Credit option is set for Depot plants
Excise Group
Check Excise Groups is created for manufacturing plant
Check the outgoing Excise Invoice settings
Check Default Challan Qty from GR is flagged in Excise group
Check Depot setting are deflagged for manufacturing plant Excise Group
Check in MIGO setting of Excise group all the below
EI Create/23D deflagged for manufacturing plant
EI Capture, Post, Duty different at GR, update RG1 at MIGO are flagged.
Check Depot settings are flagged for Excise groups for Depot
Check EI Create/23D is updated with flag mark for all Depot Excise Groups
Check the assignement of Plant, Excise Registration and Excise Group
Subcontracting
Check the sub contracting attribute is maintained as per plant requirement
Check the maintain movement type group is maitained with correct movement types
Incoming Excise Invoice
Check the assigned movement type for EI and Register Updates
Maintain Rejection code to cancel the Excise Invoice
Excise Regesiters
Check SAP Script is assigned
Number Ranges
Incoming Excise Invoice
Subcontracting Challan
Thanks
siva

Scenario related to Assembly Process in Depot

I have the assembly process in Depot, so I configured Depot as manufacturing plant in SAP.
1. Question is some product I will get through STO and same product will be sold to customer. How do i need to handle this scenario? Because while receiving I will update in RG23A, what is the process of selling? Please explain me the steps.
2. If the depot is doing assembly, whether we need to consider it as manufacturing plant or Depot? in SAP
Thanks,
Venkat
Edited by: venkat venkat on Oct 6, 2008 9:04 PM

not received any response

Assembly Processing Information

Hi,
I'm new with SAP technology. I'm working on Assembly Processing in order to have automatically filled WBS element in a sales order, once saving it.
I would like to kindly ask you if the Assembly Processing can be implemented only with Standard WBS (Standard Network) or if it can be implemented with WBS normally (not standard).
With Standard WBS it is not possible to store any planning data, planned costs or revenues, but business needs is to manage them.
Thanks a lot,
Isa

Hi,
I agree with what Abdul has to say. Refer SAP Help and get the concept of Assembly Processing cleared. Most of your doubts will get cleared once you are through with that. Secondly, you can refer the WIKI section in SDN. There is a very good article that explains the configuration details required for Assembly Processing.
This should suffice as of now. Revert later with specific queries.
Regards,
Gokul

Error while invoking BPEL Process through HTML Page

Hi ,
I have created a HTML Page to invoke BPEL synchronous process .
HTML Page contains :
<html>
<head>
<title>Untitled Document</title>
<h1>Add Macro Task Input Form </h1>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>
<body bgcolor="cyan" text="#000000">
<form name="form1" method="get" action="/httpbinding/default/AddMacroSync/process">
EmployeeId :
<input type="text" name="EmployeeId" ><br>
<br>
TaskName :
<input type="text" name="MacroTaskName" >
<button
id="identifier"
class="dialog"
label="OK"
accesskey="t"/>
<br>
</form>
</body>
</html>
I am able to invoke my BPEL Process named as " AddMacroSync" .
It also creating instance for this BPEL Process .
But when I go BPEL Console and check my instance , it is always faulted .
I am providing two inputs : Employee Id and Taskname through HTML Page .
These inputs got assigned to their respective output variables .
But when I click on audit link ..it shows error while invoking the Process .
It Show error :
when invoking endpointAddress 'http://152.69.248.232:8990/AddMacroTask-AddMacroTask-context-root/AddMacroTaskWebService', [java.lang.NumberFormatException]
But this end point address is working when I put this address in URL .
Please someone help me how to solve this problem .
Thanks
Prashant Dwivedi
Message was edited by:
Prashant Dwivedi

Hi Clemens ,
I changed My HTML ...Now it looks like as :
<html>
<head>
<title>Untitled Document</title>
<meta http-equiv="Content-Type" content="application/x-www-form-urlencoded; charset=iso-8859-1">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<form name="form1" method="post" action="/httpbinding/default/AddMacroSync">
<input type="hidden" name="msg_part" value="payload">
<input type="hidden" name="namespace" value="http://xmlns.oracle.com/AddMacroSync">
EmployeeId:
<input type="text" name="EmployeeId">
TaskName :
<input type="text" name="TaskName">
<input type="submit" name="Submit" value="Submit">
</form>
</body>
</html>
After this when I try to incoke my BPEL Process through this HTML :
I am gettign following error :
500 Internal Server Error
java.lang.IllegalStateException: IOException: Premature end of POST data
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.EvermindHttpServletRequest.getParameter(EvermindHttpServletRequest.java:2452)
     at com.collaxa.cube.ws.http.HttpBindingServlet.checkSecurity(HttpBindingServlet.java:281)
     at com.collaxa.cube.ws.http.HttpBindingServlet.doPost(HttpBindingServlet.java:85)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)

What is process through which schedule lines are cofirmed in Sales Order

What is the process through which schedule lines are cofirmed in Sales Order

Hi,
Schedule lines get confirmed on the basis of backward or forward scheduling carried out by system based on Material Availability date.
Regards
SD
Message was edited by:
Samier Danish

While deploying BPEL Process through JDeveloper 10.1.3.2 the BUILD FAILS

While deploying a BPEL Process through JDeveloper 10.1.3.2 it says :-
BUILD FAILED
D:\Development_mywork\MemoApplication\Memo\MemoProcess\build.xml:79: A problem occured while connecting to server "boomidevp.alshaya.com" using port
"7778":
### Steps to Reproduce ###
The Connections Tab, Application Server details are as follows :-
Type Tab :-
Connection Type :- Oracle Application Server 10g 10.1.3
Authentication Tab :-
UserName :- oc4jadmin
Password :- bpel123
Connection Tab :-
Connect to :- Single Instance
Host Name :- 172.16.100.85
OPMN Port :- 6004
OC4J Instance Name :- oc4j_soa
The Test was successful.
The Integration Server details are as follows :-
Connection Tab :-
App. Server :- Same thing created earlier.
Host Name :- 172.16.100.85
Port Number :- 7778
The Test Connection was successful.
After the above steps, went to Application Navigator Tab and tried to Deploy a BPEL Process.
While deploying this BPEL Process through JDeveloper 10.1.3.2 it says :-
BUILD FAILED
D:\Development_mywork\MemoApplication\Memo\MemoProcess\build.xml:79: A problem occured while connecting to server "boomidevp.alshaya.com" using port
"7778":
Alshaya eGroup Business Solutions Team
www.alshaya.com

Disable your proxy settings in JDeveloper.
Marc

BAPI for Vendor Non-PO Invoice processed through MIR7 Transaction

Hi All,
I have a requirement where i will get data from flat file. Using this data Vendor Non-PO Invoice
will be processed through MIR7 transaction with Multiple line items - Invoice Upload Parking the document for vendor non-po invoices.
The data is in below format in flat file:
Header fields in 1st line
Dr. Key related fields in 2nd line
Cr. Key related fields in 3rd line
Header fields in 4th line
Dr. Key related fields in 5th line
Cr. Key related fields in 6th line
etc .... in flat file
In these main fields coming in from flat file are: comp.code, doc.type, vendor no,
Debit/Credit indicatorSHKZG, G/L a/c no, inv/post dates etc..
My issues:
1. I am planning to use F.M BAPI_INCOMINGINVOICE_PARK is it the correct F.M!
But Here PO number seems to be mandatory for this F.M but it is not available as per our flat file,
if so can anybody suggest a BAPI for Vendor Non-PO Invoice parking for MIR7 transaction!
2. What are the parameters need to be used for from above flat file data especially for 2 line itemshttp://Dr./Cr. data other than header data. So as per Header & 2 Line items http://Dr. & Cr. Data which parameters will be updated with which data in above flat file! can anybody clarify!
3. Also in flat file WorkflowNo is available in which parameter this fields will need to be filled & also by doing this will it trigger workflow automatically!
Can anybody clarify about above points!
Thanks in advance.
Thanks,
Deep.

Hello Deep,
I know it might be quite late for you for this answer, nevertheless I will write that, because there are lots of question like yours. bapi_incominginvoice_park is also a suitable bapi for you. All you need to do is call it this way:
data: headerdata like bapi_incinv_create_header value is initial,
        table_item type table of bapi_incinv_create_item,
        gl_account like bapi_incinv_create_gl_account,
        table_gl type table of bapi_incinv_create_gl_account.
* fill headerdata and table_gl, leaving table_item empty
CALL FUNCTION 'BAPI_INCOMINGINVOICE_PARK'
    EXPORTING
      HEADERDATA                = HEADERDATA
*   ADDRESSDATA               =
    IMPORTING
      INVOICEDOCNUMBER          = lv_docnr
      FISCALYEAR                = lv_year
    TABLES
      ITEMDATA                  = table_item
*      ACCOUNTINGDATA            = table_acc
      GLACCOUNTDATA             = table_gl
*   MATERIALDATA              =
*      TAXDATA                   = table_tax
*   WITHTAXDATA               =
*   VENDORITEMSPLITDATA       =
      RETURN                    = lt_return.
This works perfectly for me, creating a mir7 document without refering to a PO. The trick here is to fulfill the glaccountingdata importing table while leaving itemdata empty.

Invoking BPEL Process through pl/sql is failing

Hi all,
I am trying to invoke BPEL process through PL/SQL and its throwing following error.
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><env:Header/><env:Body><env:Fault xmlns="http://xmlns.oracle.com/pcbpel/adapter/file/ReadFile/"><faultcode xmlns="">null:Read_ptt</faultcode><faultstring xmlns="">Cannot figure out operation name. Bad SOAPAction or wsa:Action.</faultstring><faultactor xmlns="">initiate</faultactor></env:Fault></env:Body></env:Envelope>
Following is code I am using to invoke BPEL PROCESS
declare
soap_request varchar2(30000);
soap_respond varchar2(30000);
http_req utl_http.req;
http_resp utl_http.resp;
begin
soap_request:='<?xml version="1.0" encoding="UTF-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header/>
<soap:Body xmlns:ns1="http://xmlns.oracle.com/pcbpel/adapter/file/ReadFile/">
--<ns1:Read_plt><ns1:input>leeg</ns1:input></ns1:Read_plt>
</soap:Body>
</soap:Envelope>';
http_req:= sys.utl_http.begin_request('http://localhost/orabpel/default/BPELProcess1/v2007_12_03__65618','POST','HTTP/1.1' );
sys.utl_http.set_header(http_req, 'Content-Type', 'text/xml') ;
sys.utl_http.set_header(http_req, 'Content-Length', length(soap_request)) ;
sys.utl_http.set_header(http_req, 'SOAPAction', 'initiate');
sys.utl_http.write_text(http_req, soap_request) ;
http_resp:= sys.utl_http.get_response(http_req) ;
sys.utl_http.read_text(http_resp, soap_respond) ;
sys.utl_http.end_response(http_resp) ;
dbms_output.put_line(soap_respond);
end;
Any help would be appriciated.
Thanks,
Vipul

Hi,
Switching on or off a bpel is an admin job.
u can stop an application but not one bpel.
I doubt if there is any way to do it programatically.
Let us get other opinons
Regards

Automatic Payment Process through IDOC and Receive Message Acknowledgement and BANST file format

Hi Experts,
We are implementing payment process to our client through Idoc.
Normally the process will go like below. Once Payment Initiated --> IDoc will generate --> This Idoc process through PI system and send to Bank.--> Once payment data received bank --> it will generate acknowledgement receipt and Bansta file and send it PI system --> This PI system system again send it --> SAP system. Here I want to know the required configuration from PI system to SAP system while receiving acknowledgement and Bansta file. And let me know if u guys have steps...
Thanks,
Raviram

Hi,
>is possible using the fileadapter to read this file and with pass it throug PI to IDOC receiver adapter without any mapping?
yes
>In that case what should the Message Type we are using in the file-sender adapter look like?
If you have no mapping it doesnt matter, the message type will not be validated during runtime. You can take the IDoc type imported from the SAP system
Regards,
Udo

Payment process through F110

Hai,
I am consuming lot of time while processing payment through F-110.
As and when advance is processed, i need to edit the payment proposal as there would be huge bills payable other than advance, i need to edit each line item and then process. Is there any other process through which only advance payments can be process. As is there any configuration changes that can be effected, which allows only the advance proposal to come for this f110 transaction.
Could you please advice me accordingly.

Hi,
Just a try.
In Free selection, select Reconciliation account and give the alternative reconciliation account that is used for SPL GL trasactions (Advances).
Regards,
Saravan Kanuparthy

Class Not found Exception for invoking BPEL process through the Java code

Hi.
The JDeveloper IDE raise the Exception From the invoking the BPEL process through the java code .Class Not Found Exception (Locator,ID.......).What is process of importing these classes from API.

In your code (.bpel file) import the library using the bpelx:exec tag. For example the adding the following entry in your .bpel file imports the com.oracle.bpel.client.util library.
<bpelx:exec import="com.oracle.bpel.client.util.*"/>

When deploying BPEL Process through JDeveloper java.security.AccessControlE

1.) Navigated to the Connections tab of JDeveloper 10.1.3.2.
2.) Under the Application Server node, created a new Application Server
connection, provided the relevant information on Type, Authentication
& Connection's tab.
3.) On Authentication Tab, provided the username as oc4jadmin.
The password was not modified.
4.) On the Test Tab after clicking on Test Connection,
the connection was created successfully.
5.) Under the Integration Server node,created a new Integration Server
connection, provided the relevant information on Name & Connection
Tab's.
6.) On the Test Tab after clicking on Test Connection,
the connection was created successfully.
7.) Went to the Applications Navigator tab of JDeveloper 10.1.3.2.
8.) Here a simple BPEL Process was created.
9.) When trying to deploy the BPEL Process through JDeveloper,
the below exception was thrown.
We are using Oracle's SOA Suite 10.1.3.1 :-
Buildfile: C:\TerminationDevelopment\TerminationProcess\build.xml
validateTask:
[echo]
| Validating
workflow
[validateTask] url is file:/C:/JDevStudioBaseDevelopment/integration/bpm/support/files/WorkflowTaskDef
inition.xsd
[validateTask] url is file:/C:/JDevStudioBaseDevelopment/integration/bpm/support/files/WorkflowTaskDef
inition.xsd
[validateTask] url is file:/C:/JDevStudioBaseDevelopment/integration/bpm/support/files/WorkflowTaskDef
inition.xsd
[validateTask] url is file:/C:/JDevStudioBaseDevelopment/integration/bpm/support/files/WorkflowTaskDef
inition.xsd
[validateTask] Validation of workflow task definitions is completed without errors
deployProcess:
[echo]
| Deploying bpel process TerminationProcess on 172.16.100.85, port
7778
[deployProcess] Deploying process C:\TerminationDevelopment\TerminationProcess\output\bpel_TerminationProcess_1.1.
jar
BUILD FAILED
C:\TerminationDevelopment\TerminationProcess\build.xml:79: A problem occured while connecting to server "172.16.100.85" using port "7778":
java.security.AccessControlException: access denied
(com.collaxa.security.DomainPermission default read)
at java.security.AccessControlContext.checkPermission(AccessControlContext.java:264
at java.security.AccessController.checkPermission(AccessController.java:427)
at com.collaxa.security.OC4JSecurityService.checkAccess(OC4JSecurityService.java:16
at com.collaxa.security.SecurityService.checkDomainAccess(SecurityService.java:26)
Text continued in next action...

Hello
I have the same problem , please see the solution if you have fixed that.
Thanks

Parallel Processing through ABAP program

Hi,
We are trying to do the parallel processing through ABAP. As per SAP documentation we are using the CALL FUNCTION STARTING NEW TASK DESTINATION.
We have one Z function Module and as per SAP we are making this Function module (FM)as Remote -enabled module.
In this FM we would like to process data which we get it from internal table and would like to send back the processed data(through internal table) to the main program where we are using CALL FUNCTION STARTING NEW TASK DESTINATION.
Please suggest how to achieve this.
We tried out EXPORT -IMPORT option meaning we used EXPORT internal table in the FM with some memory ID and in the main program using IMPORT internal table with the same memory ID. But this option is not working even though ID and name of the internal table is not working.
Also, SAP documentation says that we can use RECEIVE RESULTS FROM FUNCTION 'RFC_SYSTEM_INFO'
IMPORTING RFCSI_EXPORT = INFO in conjunction with CALL FUNCTION STARTING NEW TASK DESTINATION. Documentation also specifies that "RECEIVE is needed to gather IMPORTING and TABLE returns of an asynchronously executed RFC Function module". But while creating the FM remote-enabled we cant have EXPORT or IMPORT parameters.
Please help !
Thanks in advance
Santosh

<i>We tried out EXPORT -IMPORT option meaning we used EXPORT internal table in the FM with some memory ID and in the main program using IMPORT internal table with the same memory ID. But this option is not working even though ID and name of the internal table is not working</i>
I think that this is not working because that memory does not work across sessions/tasks. I think that the
IMPORT FROM SHARED BUFFER and EXPORT TO SHARED BUFFER would work. I have used these in the past and it works pretty good.
Also,
here is a quick sample of the "new task" and "recieve" functionality.   You can not specify the importing parameters when call the FM. You specify them at the recieving end.
report zrich_0001 .
data: session(1) type c.
data: ccdetail type bapi0002_2.
start-of-selection.
* Call the transaction in another session...control will be stop
* in calling program and will wait for response from other session
call function 'BAPI_COMPANYCODE_GETDETAIL'
           starting new task 'TEST' destination 'NONE'
               performing set_session_done on end of task
    exporting
      companycodeid             = '0010'
* IMPORTING
*   COMPANYCODE_DETAIL        = ccdetails
*   COMPANYCODE_ADDRESS       =
*   RETURN                    =
* wait here till the other session is done
wait until session = 'X'.
write:/ ccdetail.
*       FORM SET_session_DONE
form set_session_done using taskname.
* Receive results into messtab from function.......
* this will also close the session
receive results from function 'BAPI_COMPANYCODE_GETDETAIL'
    importing
       companycode_detail        = ccdetail.
* Set session as done.
session = 'X'.
endform.
Hope this helps.
Rich Heilman

A problem with initiating a BPEL process through its web service interface

hi,
i am trying to initiate the helloWorld BPEL process through its web service interface. i use a proxy class that i wrote and i use it from J#.net.
this is the relevant code part:
hello.HelloWorldBinding wsProxy = new hello.HelloWorldBinding();
wsProxy.initiate("Hello");
and the server shows the following message:
ORABPEL-05002
Message handle error.
An exception occurred while attempting to process the message "com.collaxa.cube.
engine.dispatch.message.invoke.InvokeInstanceMessage"; the exception is: Cannot
decode properties.
The process domain was unable to decode the properties for message guid 10, whic
h are stored in column String index out of range: 3094; the exception reported i
s: {2}.
sql statement: SELECT conv_id, message_guid, domain_ref, process_id, revision_ta
g, operation_name, receive_date, state, priority, properties FROM invoke_message
WHERE message_guid = ?
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(Dispatc
hHelper.java:152)
at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseSche
duledWorker.java:70)
at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java
:86)
at com.evermind.server.ejb.MessageDrivenBeanInvocation.run(MessageDriven
BeanInvocation.java:123)
at com.evermind.server.ejb.MessageDrivenHome.onMessage(MessageDrivenHome
.java:755)
at com.evermind.server.ejb.MessageDrivenHome.run(MessageDrivenHome.java:
928)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(Relea
sableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
<2006-05-10 21:21:15,171> <ERROR> <default.collaxa.cube.engine.data> <BaseDeliveryPersistenceAdaptor::loadInvokeMetaDa
java.lang.StringIndexOutOfBoundsException: String index out of range: 3094
at java.lang.String.substring(String.java:1441)
at com.collaxa.common.util.LVDecoder.decodeElement(LVDecoder.java:152)
at com.collaxa.common.util.LVDecoder.decodeToMap(LVDecoder.java:45)
at com.collaxa.cube.engine.adaptors.common.BaseDeliveryPersistenceAdaptor.loadInvokeMetaData(BaseDeliveryPersi
r.java:2186)
at com.collaxa.cube.engine.adaptors.common.BaseDeliveryPersistenceAdaptor.__loadInvoke(BaseDeliveryPersistence
:2112)
at com.collaxa.cube.engine.adaptors.common.BaseDeliveryPersistenceAdaptor.loadInvoke(BaseDeliveryPersistenceAd
079)
at com.collaxa.cube.engine.data.DeliveryPersistenceMgr.loadInvoke(DeliveryPersistenceMgr.java:357)
at com.collaxa.cube.engine.delivery.DeliveryService.handleInvoke(DeliveryService.java:465)
at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleInvoke(CubeDeliveryBean.java:335)
at ICubeDeliveryLocalBean_StatelessSessionBeanWrapper16.handleInvoke(ICubeDeliveryLocalBean_StatelessSessionBe
java:1796)
at com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessageHandler.handle(InvokeInstanceMessageHa
7)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:125)
at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
at com.evermind.server.ejb.MessageDrivenBeanInvocation.run(MessageDrivenBeanInvocation.java:123)
at com.evermind.server.ejb.MessageDrivenHome.onMessage(MessageDrivenHome.java:755)
at com.evermind.server.ejb.MessageDrivenHome.run(MessageDrivenHome.java:928)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
what is the problem? how come i can't initiate the process?
i will be happy if i could get help..
thanks in advance

can you initate the process from the bpel console successfully?
if so can you use obtunnel from the installation to trace the soap message (that goes over the wire), my best guess in this case is a problem with a header (holding the wsa information) ..
after starting obtunnel it will liesten to a custom port, and will forward the request to the engine, so you need to point your client to this new port..
hth clemens

Assembly Processing through Contract

Similar Messages

Maybe you are looking for