Assertion Failed editting list with taxonomy field

I have lists with a taxonomy column in them. when editing the list, jsgrid looks to be throwing an assertion failed. Digging into the call stack, it is calling GetDisplayControl, the assert is "Sys.Debug.assert(displayControlName in displayControlsSingletonMap);
Rolling back a bit, the order of calls on the call stack
Sys$_Debug$fail
Sys$_Debug$assert
GetDisplayControl
RegisterPropType
RegisterNewCustomPropType
SP_UI_Taxonomy_ControlRegistration$RegisterGridControls
Init
The displaycontrolName at the point of the assertion error is "" so it defininately isn't in displayControlsSingletonMap, which is why the assert is happening.
Anyone have any solutions?

Hi SP Yogi. No fix for it, no. I had opened a support ticket with Microsoft to deal with the issue, but we never could get together at the same time to work on it. I did provide complete log files to them, but that's as far as it went. My company then decided
to go with SP2010 environment instead of SP2013, so became a moot point for us and I figured someone else would start screaming.
If anyone else raises it with Microsoft, you could have them look at
case # 113041510367364, which is the ticket I created for raising the issue. Might speed things along, help discount environment issues, etc.
Good luck and please report back any progress!

Similar Messages

  • I get Assertion Failed open report with CR viewer 2.0.23

    Post Author: gionnyDeep
    CA Forum: General
    any help?
    Assertion Failed: java.lang.Throwable        at com.crystaldecisions.reports.common.j.b.a(Unknown Source)        at com.crystaldecisions.reports.common.j.b.a(Unknown Source)        at com.crystaldecisions.reports.queryengine.b0.char(Unknown Source)        at com.crystaldecisions.reports.queryengine.b0.else(Unknown Source)        at com.crystaldecisions.reports.queryengine.b0.else(Unknown Source)        at com.crystaldecisions.reports.queryengine.b0.d(Unknown Source)        at com.crystaldecisions.reports.queryengine.b0.dt(Unknown Source)        at com.crystaldecisions.reports.queryengine.b0.dD(Unknown Source)        at com.crystaldecisions.reports.queryengine.b9.int(Unknown Source)        at com.crystaldecisions.reports.queryengine.b9.for(Unknown Source)        at com.crystaldecisions.reports.queryengine.b9.int(Unknown Source)        at com.crystaldecisions.reports.queryengine.b9.for(Unknown Source)        at com.crystaldecisions.reports.queryengine.b9.int(Unknown Source)        at com.crystaldecisions.reports.queryengine.b9.case(Unknown Source)        at com.crystaldecisions.reports.queryengine.b9.if(Unknown Source)        at com.crystaldecisions.reports.queryengine.b9.c(Unknown Source)        at com.crystaldecisions.reports.queryengine.b0.d(Unknown Source)        at com.crystaldecisions.reports.queryengine.b0.dt(Unknown Source)        at com.crystaldecisions.reports.reportdefinition.datainterface.l.a(Unknown Source)        at com.crystaldecisions.reports.dataengine.j.j(Unknown Source)        at com.crystaldecisions.reports.dataengine.j.i(Unknown Source)        at com.crystaldecisions.reports.dataengine.j.a7(Unknown Source)        at com.crystaldecisions.reports.dataengine.j.a9(Unknown Source)        at com.crystaldecisions.reports.dataengine.j.char(Unknown Source)        at com.crystaldecisions.reports.dataengine.n.a(Unknown Source)        at com.crystaldecisions.reports.dataengine.a5.a(Unknown Source)        at com.crystaldecisions.reports.dataengine.a5.Z(Unknown Source)        at com.crystaldecisions.reports.dataengine.a5.<init>(Unknown Source)        at com.crystaldecisions.reports.dataengine.a5.<init>(Unknown Source)        at com.crystaldecisions.reports.dataengine.a5.<init>(Unknown Source)        at com.crystaldecisions.reports.dataengine.a5.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.bn.<init>(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.bn.if(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.d.k.<init>(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.d.o.<init>(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.d.o.a(Unknown Source)        at com.crystaldecisions.reports.reportengineinterface.g.if(Unknown Source)        at com.crystaldecisions.reports.reportengineinterface.g.do(Unknown Source)        at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.getPage(Unknown Source)        at com.businessobjects.crystalreports.viewer.core.rs.b.if(Unknown Source)        at com.businessobjects.crystalreports.viewer.core.aw.a(Unknown Source)        at com.businessobjects.crystalreports.viewer.core.aw.run(Unknown Source)        at java.lang.Thread.run(Thread.java:619)

    Sorry, but you have to define "viewer just crashed". To different people this means different things; error, viewer never shows up, application terminates, etc., etc., etc....
    If the issue is only 10% of computers then it is not
    Re. "...could be caused by:"
    - previous installation of CR8.5 (or earlier) runtime (how to cleanup it correctly?)
    possibly - see below
    - OS configuration (what we need to ajust?)
    probably not - as long as it's the same OS and SPs
    - something missing in our code (but why it works in 90% cases?)
    -no
    - something wrong with CRXI runtime (but we a using latest available MSMs, and again, this works in 90% ...)
    possibly see below.
    I would approach the issue by running [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] and comparing the dlls loading on a computer that works and one that "crashes"...
    Your second utility is [Process Monitor|http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx] but ProcMon creates large and difficult to read files.
    Oh, and get the powers that be to start to consider moving away from this legacy "stuff". Like I said, PE APIs have been gone since version 9 of CR and RDC has been retired in CR XI R2 (11.5). Neither product is supported anymore.
    - Ludek

  • Replace Select List with text field in Collection Code

    hi
    i am using an Collection Code .i have used an java script code to fetch rate of item with out refresh in column *(APEX_ITEM.SELECT_LIST_FROM_QUERY(10,a.c009).*
    My problem is this column is Select List but i want to use in textfield here.
    This is my Rate Column . How can i Replace it with textfield like APEX_ITEM.TEXT
    APEX_ITEM.SELECT_LIST_FROM_QUERY(10,a.c009,'SELECT RATE D, RATE R FROM ITEM_DETAILS WHERE ITEM_NAME =''' || a.c006|| '''',
    This is my Collection code
    select APEX_ITEM.HIDDEN(1,SEQ_ID),
    APEX_ITEM.TEXT(2,a.c001) c001,
    APEX_ITEM.TEXT(3,a.c002) c002,
    APEX_ITEM.TEXT(4,a.c003) c003,
    APEX_ITEM.TEXT(5,a.c004) c004,
    APEX_ITEM.SELECT_LIST_FROM_QUERY(6,a.c005,'SELECT ITEM_GROUP D,ITEM_GROUP R FROM ITEM_GROUP_DETAILS order by ITEM_GROUP',
    'style="" '
    ||'onchange="get_select_list_xml(this,''f7_'|| LPAD (seq_id, 4, '0')
    ||''')"',
    'YES',
    '0',
    '-Select-',
    'f6_'|| LPAD (seq_id, 4, '0'),
    NULL,
    'NO') c005,
    APEX_ITEM.SELECT_LIST_FROM_QUERY(7,a.c006,'SELECT ITEM_NAME D,ITEM_NAME R FROM ITEM_DETAILS WHERE ITEM_GROUP =''' || a.c005|| '''' ,
    'style=""'
    ||'onchange="get_select_list_xml21(this,''f10_'|| LPAD (seq_id, 4, '0')
    ||''')"',
    'YES',
    '0',
    '-Select Name -',
    'f7_' || LPAD (seq_id, 4, '0'),
    NULL,
    'NO') c006,
    APEX_ITEM.TEXT(8,a.c007) c007,
    APEX_ITEM.TEXT(9,a.c008) c008,
    APEX_ITEM.SELECT_LIST_FROM_QUERY(10,a.c009,'SELECT RATE D, RATE R FROM ITEM_DETAILS WHERE ITEM_NAME =''' || a.c006|| '''',
    'style=""',
    'YES',
    '0',
    '-Select Rate -',
    'f10_' || LPAD (seq_id, 4, '0'),
    NULL,
    'NO') c009,
    APEX_ITEM.TEXT(11,a.c010) c010
    FROM APEX_collections a
    where a.collection_name = 'ABC'
    Thanks
    Manoj Kaushik
    Edited by: Manoj Kaushik on Mar 11, 2010 1:25 AM

    hi
    i am using an Collection Code .i have used an java script code to fetch rate of item with out refresh in column *(APEX_ITEM.SELECT_LIST_FROM_QUERY(10,a.c009).*
    My problem is this column is Select List but i want to use in textfield here.
    This is my Rate Column . How can i Replace it with textfield like APEX_ITEM.TEXT
    APEX_ITEM.SELECT_LIST_FROM_QUERY(10,a.c009,'SELECT RATE D, RATE R FROM ITEM_DETAILS WHERE ITEM_NAME =''' || a.c006|| '''',
    This is my Collection code
    select APEX_ITEM.HIDDEN(1,SEQ_ID),
    APEX_ITEM.TEXT(2,a.c001) c001,
    APEX_ITEM.TEXT(3,a.c002) c002,
    APEX_ITEM.TEXT(4,a.c003) c003,
    APEX_ITEM.TEXT(5,a.c004) c004,
    APEX_ITEM.SELECT_LIST_FROM_QUERY(6,a.c005,'SELECT ITEM_GROUP D,ITEM_GROUP R FROM ITEM_GROUP_DETAILS order by ITEM_GROUP',
    'style="" '
    ||'onchange="get_select_list_xml(this,''f7_'|| LPAD (seq_id, 4, '0')
    ||''')"',
    'YES',
    '0',
    '-Select-',
    'f6_'|| LPAD (seq_id, 4, '0'),
    NULL,
    'NO') c005,
    APEX_ITEM.SELECT_LIST_FROM_QUERY(7,a.c006,'SELECT ITEM_NAME D,ITEM_NAME R FROM ITEM_DETAILS WHERE ITEM_GROUP =''' || a.c005|| '''' ,
    'style=""'
    ||'onchange="get_select_list_xml21(this,''f10_'|| LPAD (seq_id, 4, '0')
    ||''')"',
    'YES',
    '0',
    '-Select Name -',
    'f7_' || LPAD (seq_id, 4, '0'),
    NULL,
    'NO') c006,
    APEX_ITEM.TEXT(8,a.c007) c007,
    APEX_ITEM.TEXT(9,a.c008) c008,
    APEX_ITEM.SELECT_LIST_FROM_QUERY(10,a.c009,'SELECT RATE D, RATE R FROM ITEM_DETAILS WHERE ITEM_NAME =''' || a.c006|| '''',
    'style=""',
    'YES',
    '0',
    '-Select Rate -',
    'f10_' || LPAD (seq_id, 4, '0'),
    NULL,
    'NO') c009,
    APEX_ITEM.TEXT(11,a.c010) c010
    FROM APEX_collections a
    where a.collection_name = 'ABC'
    Thanks
    Manoj Kaushik
    Edited by: Manoj Kaushik on Mar 11, 2010 1:25 AM

  • Open Production Orders List with a Field from Sales Order

    Hi All,
    I have the following query:
    SELECT distinct T0.[DocNum] As ProdOrder, T0.[ItemCode], (select itemname from OITM where T0.[ItemCode] = OITM.itemcode) As ProdName, T0.[PostDate], T0.[PlannedQty] As Planned FROM OWOR T0, OITM  T1 where T0.[Status] <>'C'
    Now I want to add ORDR.NumAtCard field in this query, pls advise me what change should i make to my existing query.
    Need the solution urgently, pls help asap.
    Best Regards,
    JAQ

    Hi,
    Try this:
    SELECT distinct T0.DocNum As ProdOrder, T0.ItemCode, T1.itemname As ProdName,
    T0.PostDate, T0.PlannedQty As Planned,T2.NumAtCard
    FROM dbo.OWOR T0
    INNER JOIN dbo.OITM T1 ON T0.ItemCode = T1.itemcode
    LEFT JOIN dbo.ORDR T2 ON T2.DocEntry = T0.OriginAbs AND T0.OriginType = 'S'
    where T0.Status != 'C'
    Thanks,
    Gordon

  • How to edit the cube with new fields without changing historical  in BI 7.0

    HI,
    I have requirment that need to edit cube with new fields and without changing historical data on it.
    Please some one can advise me abt the above scenario.
    Note:I am using BI7.0

    hi Krish,
    In BI 7.0,
    we cannot add a characteristic to an existing dimension if the data is not deleted from the cube.
    It can go to a new dimension and that will not change the existing structure of the cube tables, but will just add to it (as another dim table).  or use remodeling.
    for more details, please seach threads.....
    with hopes
    ARS

  • Is it possible to create a editable pdf with validation(required field) using Adobe Acrobat pro version?

    Hi,
    the subject says it all. I have downloaded the trail version to see if its possible to create a editable pdf with validation(required field) using Adobe Acrobat pro version?
    Basically, I will have to create a pdf form where users fill it and send it back to me. there will be required fields (the textbox and check box) that user need to fill before saving the editable pdf?
    Is it possible. if so, can someone kind enough to point to me right directions?
    Thanks in advance.

    Thanks for reply. What I am trying to achieve is to give an option for the user to download the pdf form and once the user tries to save the pdf, it validates with the required field. I managed to create the editable pdf with required fields option. I just need that validation to be done when user click on save file. How can I achieve this? thanks so much for your help.

  • Javascript / Select List with Submit problems

    I have a page (page 3) where I can either edit or create a record. If I am editing a record, the data loads on page 3 via a PL/SQL block. On page 3, I have a textual item with Javascript linked to it which pops up a new window. In the Javascript, I am passing three values to the next page. Two of those values (P3_ITEM1, P3_ITEM2) are 'Select List with Submit'. If I am creating a new record from page 3, the Javascript works fine and the popup window comes up when I click on the textual item. However, if I am editing an existing record, I get an error when I click on my textual link. Looking at the address bar, it is not passing the value of P3_ITEM1 and P3_ITEM2 to the next page. It does, however, pass the value of P3_ITEM3 (not a 'Select List with Submit') to the next page. Again, the Javascript popup works fine if I use the 'Select List with Submit' fields to populate P3_ITEM1 and P3_ITEM2 (i.e. if I submit those fields) and it does not work if P3_ITEM1 and P3_ITEM2 are already populated when page 3 loads (i.e. if I do not submit those fields). Looking at the session variables, it appears as though P3_ITEM1 and P3_ITEM2 are set prior to clicking the link which initiates the Javascript. However, the URL in the popup window says the value of those fields is 'undefined'. Does anybody have any idea what I can do to make this work or why it is not working? Thanks.
    -Chris

    Hello Chris,
    It seems like you are having some problem with setting/reading session state, but it’s really hard to pin point the problem without seeing any code. Can you post your two pages on apex.oracle.com?
    Regards,
    Arie.

  • Assertion Failed with switching between editing mode of table view

    I'm writing an app that can switching between edit mode of a table view
    - in edit mode a new line appear at the bottom
    - out edit mode this line will disappear
    I used insertRowsAtIndexPath and deleteRowsAtIndexPath to achieve this effect, but then during testing, if I switching edit mode too frequently, I got an assertion failure
    Assertion failed: (cache->size >= g->size), function evictglyph_entry_fromcache, file Fonts/CGFontCache.c, line 836.
    It seems someone has also encountered this before, but I have found no solution yet. Anyone know how to fix it or work around it?

    Hi,
    Please check if you have entries on the table RSTRANRULE with:
    GROUPID   =  'space'
    GROUPTYPE =  'space' or 'S'
    REF_RULE  <> 'space'
    If there are inconsistent entries in the RSTRANRULE table such as:
           TRANID         *
           OBJVERS        *
           RULEID         *
           SEQNR          *
           GROUPID        00
           GROUPTYPE      space  or  GROUPTYPE    'S'
           RULETYPE       space
           REF RULE       *
    Delete these entries from the table.
    Activate the affected transformations.
    More info check the note 998730.
    9987300-ASSERTION_FAILED when calling or changing groups, group 00.
    Thanks,
    Walter Oliveira.

  • "The SPListItem being updated was not retrieved with all taxonomy fields." Exception while updating a taxaonomy field

    Hi All,
    I'm getting this exception "The SPListItem being updated was not retrieved with all taxonomy fields." when i try to programatically update a taxonomy field of a list item. Can any1 pls tell me why this exception occurs ???

    Recently hit this myself, as well.  Turns out it's a central admin setting that throttles the lookup return count, and Taxonomy fields are just lookups under the hood.
    Go into Central Administration, Manage Web Applications, select your web application, and then in the ribbon choose the dropdown under General Settings select Resource Throttling.  Find the setting for "List View Lookup Threshold" and raise
    it from the default 8 (can go up to 1000, but 20 is likely fine depending how many lookup fields you're pulling back in your SPListItem).

  • ALV LIST with few checkboxes fields

    Hi everyone,
    I want to create an ALV with 2 fields that are checkboxes.
    I am succeeding to create an ALV with one checkbox field.
    How do we do in order to create an ALV with 2 checkboxes fields using ALV LIST ?
    I know that we have to specify in the layout of the ALV the name of the field we want it to be checkbox.
    For example :
      gs_layout-box_fieldname   = 'FLAG'.            
    But, how do we specify a second checkbox field ?
    Thanks.
    Regards.

    Slight modification to my earlier post. this is with 2 checkboxes.
    REPORT  ztest_alv_checkbox.
    TYPE-POOLS: slis.
    DATA: it_fcat TYPE  slis_t_fieldcat_alv,
          wa_cat LIKE LINE OF it_fcat.
    DATA: BEGIN OF it_alv OCCURS 0,
           check1(1),
           check2(1),
           carrid LIKE sflight-carrid,
           connid LIKE sflight-connid,
          END OF it_alv.
    DATA:it_events TYPE slis_t_event,
         wa_events LIKE LINE OF it_events.
    SELECT carrid
           connid
      FROM sflight
      INTO CORRESPONDING FIELDS OF TABLE it_alv
      UP TO 20 ROWS.
    wa_cat-fieldname = 'CHECK1'.
    wa_cat-input = 'X'.
    wa_cat-edit = 'X'.
    wa_cat-checkbox = 'X'.
    wa_cat-seltext_l = 'Check'.
    wa_cat-tabname = 'IT_ALV'.
    APPEND wa_cat TO it_fcat.
    CLEAR wa_cat.
    wa_cat-fieldname = 'CHECK2'.
    wa_cat-input = 'X'.
    wa_cat-edit = 'X'.
    wa_cat-checkbox = 'X'.
    wa_cat-seltext_l = 'Check'.
    wa_cat-tabname = 'IT_ALV'.
    APPEND wa_cat TO it_fcat.
    CLEAR wa_cat.
    wa_cat-fieldname = 'CARRID'.
    wa_cat-seltext_l = 'Carrid'.
    wa_cat-tabname = 'IT_ALV'.
    APPEND wa_cat TO it_fcat.
    CLEAR wa_cat.
    wa_cat-fieldname = 'CONNID'.
    wa_cat-seltext_l = 'Connid'.
    wa_cat-tabname = 'IT_ALV'.
    APPEND wa_cat TO it_fcat.
    wa_events-name = slis_ev_end_of_list.
    wa_events-form = 'MODIFY_LIST'.
    APPEND wa_events TO it_events.
    CLEAR wa_events.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
      EXPORTING
        i_callback_program = sy-repid
        it_fieldcat        = it_fcat
        it_events          = it_events
      TABLES
        t_outtab           = it_alv
      EXCEPTIONS
        program_error      = 1
        OTHERS             = 2.
    IF sy-subrc NE 0.
    ENDIF.
    "After The list display i am modifying the report output
    "using the END_OF_LIST event of ALV
    "here conditionally i can make the cell input off
    *&      Form  MODIFY_LIST
    *       text
    FORM modify_list.
      DATA: l_lines TYPE i,
            l_index TYPE i.
      l_lines  = l_lines + 3.
      "because we have 3 lines extra occupied by lables.
      "if we have header,i mean top of page add the no.of lines
      "how many ever top of page have + 3 for labels.
      DESCRIBE TABLE it_alv LINES l_lines.
      l_lines  = l_lines + 3.
      "understnad this part alone.
      DO l_lines TIMES.
        IF sy-index GT 3.
          l_index = sy-index - 3.
          READ TABLE it_alv INDEX l_index.
          "this is my condition..
          IF sy-subrc = 0 .
            IF it_alv-carrid <> 'AA'.  "place your condition here.
              "accordingly you can disable the checkbox
              "use the below logic
              READ LINE sy-index INDEX sy-lsind.
              IF sy-subrc = 0.
                MODIFY LINE sy-index INDEX sy-lsind
                           FIELD FORMAT  it_alv-check1 INPUT OFF
                                         it_alv-check2 INPUT OFF.
              ENDIF.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDDO.
    ENDFORM.                    "MODIFY_LIST

  • Lightroom, Assertion Fail, and my utter frustration and disappointment with Adobe

    Right now it is after 3AM and I have been trying for hours to get my very expensive Adobe software to work because it decided break even though I had not changed anything since it all worked correctly last weekend.
    I have been using Lightroom since it initial beta and rely on it to do my job as a photographer. I upgraded to 5.4 the day it came out, which has not been several months ago. It all that time I have not had any problems. Specifically, a week ago it was working just fine. In case this is relevant, despite having full Lightroom 5 and Photoshop CS6 licenses, I went ahead and signed up for CC while the photographer bundle was still available. Anyway, tonight I came home after photographing and event and went to start the import process only to find that Lightroom decided it wanted me to register again, and then did two "Assertion Failure" popups before completely failing to work. This happens if I just launch the application or click on an individual catalog to open it. My deadline which requires the processing of almost 800 photos is what is now this afternoon.
    So far I have:
    * Run through the entire Adobe provided steps listed here: Error: 'assertion failed' | Update | Windows
    * Tried running the application as admin
    * Rebooted the computer
    * Uninstalled and reinstalled 5.4 using CC
    * Uninstalled and installed 5.3 manually
    * Manually installed the 5.4 upgrade on top of 5.3
    * Tried Chatting with a "Customer Service" rep. This name is completely false. As a customer, the service I need is for the software that I both bought and subscribed to to work when I need it to work for my job. The person I was selected to chat with told me that they had no way to help me with any sort of technical issue and I would need to call tech support starting Monday at 5AM. This is completely insane. Why are they even available on the weekend if they can't solve technical issues? Who sits around on Friday night with issues important enough to contact support immediately that aren't technical in nature?
    This is made even more fun by the fact that it would appear all or most of the Adobe website is offline right now.
    At this point I am at a complete loss for how I am suppose to make this work. Any suggestions for solutions other than was I have listed above would be greatly appreciated. If some technically capable Adobe person happens to see this, I would be more than willing to provide any debug output that might be helpful.

    jgoforth wrote:
    Any suggestions for solutions other than was I have listed above would be greatly appreciated.
    Try deleting your preferences file (I mean: rename, or make a backup before deleting). This page has location info:
    Preference and other file locations in Lightroom 5

  • ALV list with only 1 field

    Hi guru's,
    I want to create an ALV list with only a char255 field.
    <all_table> contains data of sflight and is of type sflight(dynamically).
    I want to show the data as one line.
    CALL FUNCTION 'DDIF_FIELDINFO_GET'
           EXPORTING
                tabname   = 'TPPARFIL'
                fieldname = 'LINE'
          TABLES
                dfies_tab = it_dfies.
      READ TABLE it_dfies INDEX 1.
      IF sy-subrc IS INITIAL.
      MOVE-CORRESPONDING it_dfies TO wa_fieldcat.
      wa_fieldcat-scrtext_s = 'Results:'.
        APPEND wa_fieldcat TO gt_fieldcat.
      ENDIF.
    t_output[] = <all_table>.
      CALL FUNCTION 'LVC_TRANSFER_TO_SLIS'
           EXPORTING
                it_fieldcat_lvc = gt_fieldcat
           IMPORTING
                it_fieldcat_alv = it_fieldcat_alv.
      PERFORM fill_alv_layout.
    * Show list
      CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
           EXPORTING
                i_callback_program = lv_repid
                i_grid_title       = sy-title
                 is_layout          = gs_layout
                it_fieldcat        = it_fieldcat_alv[]
           TABLES
                t_outtab           = t_output
           EXCEPTIONS
                program_error      = 1
                OTHERS             = 2.
    *&      Form  fill_alv_layout
      FORM fill_alv_layout.
        CLEAR: gs_layout.
        gs_layout-max_linesize         = 160.
        gs_layout-min_linesize         = 160.
        gs_layout-detail_initial_lines = 'X'.
        gs_layout-zebra                = 'X'.
        gs_layout-edit_mode            = 'A'.
        gs_layout-numc_sum             = 'X'.
        gs_layout-colwidth_optimize    = 'X'.
        gs_layout-window_titlebar      = sy-title.
        gs_layout-totals_only          = 'X'.
      ENDFORM.                    " fill_alv_layout
    When I run this it only gives an empty view of the fields with type char255.
    Regards,
    Wim

    hi,
    As per your code I think your internal table is empty. Please set debugger after internal table fill and check. If the data is there then please check your field catalog entry.
    Regards,
    Sachin

  • When replying to an add on Craig's List, for example, it goes back to my old email address I had with IE, and fails to connect with the ad's author and I'd like to know how to make it use my gmail address with Firefox instead.

    When replying to an ad, via email, posted on Craig's List , for example, it attempts to use my old email address I had with IE, then fails to connect with the ad's author. How do I get it to only use my gmail address with Firefox?
    == This happened ==
    Every time Firefox opened

    See https://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

  • Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901

    Hi Everyone,
    I have a program that sends information(analog output) to lab windows cvi in the form of a text file or user input.
    The program runs on the computers that I have the field point explorer and lab windows cvi installed on. In order to run the program without always installing labwindows/cvi and field point; I wanted to create an executable file that could be load on another computer.
    I used the create distribution kit part of labwindows/cvi to do this.After creating the distribution kit, I then installed it
    to another computer.
    My user interface appears on the screen, when the user clicks on the exe. file, but no data is sent to the field point module. I know that the data is being read from the user and textfile because in it appears in the uir.
    The following are some details about the problem:
    1. On another computer without labwindows/cvi and field point explorer not installed - no data is sent to field point module
    I know this because a current is being read on the current meter connected to field point module.
    My questions are the following:
    1. What are the possible reasons for the data not being sent to the field point module?
    2. Do I still need to create an iak. (Installing Field point Explorer) file stored on any new computer that I install my created distribution kit file too?
    Thankyou very much for any help that you can provide. I greatly appreciate it.
    Faen9901

    Re: Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901Faen9901,
    1) If you do not install FieldPoint Explorer, the FieldPoint Server is not installed so there is nothing on the target computer that knows how to talk to the FieldPoint system.
    2) Yes, you need an IAK file on the target computer. Assuming the settings (i.e. com port#) are identical you can simply include the iak file as part of the distribution.
    3) You also need to include as part of your installer the file "fplwmgr.dll". If this file is not installed, your program will not be able to access the FieldPoint Server. Alternatively, this file is installed automatically if FieldPoint Explorer detects LabWindows/CVI or Measurement Studio Development versions on the target computer or if you choose to do a custom FieldPoint Explorer installation and
    choose to provide LabWindows/CVI support.
    Regards,
    Aaron

  • Weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot export non clusterable object with jndiName ]

    Hi,
    I am trying to deploy an EJB module have 4-5 EJB's on weblogic 8.1 through JBuilder.
    I am getting following error during deployment.
    Exception:weblogic.management.ApplicationException: prepare failed for Sample.jar
         Module: Sample.jar     Error: Exception preparing module: EJBModule(Sample.jar,status=NEW)
    Unable to deploy EJB: SampleBean from Sample.jar:
    weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot export non
    clusterable object with jndiName ]
         at weblogic.utils.Debug.assertion(Debug.java:57)
         at weblogic.rmi.extensions.server.ServerHelper.exportObject(ServerHelper.java:272)
         at weblogic.ejb20.internal.BaseEJBHome.setup(BaseEJBHome.java:95)
         at weblogic.ejb20.internal.StatelessEJBHome.setup(StatelessEJBHome.java:67)
         at weblogic.ejb20.deployer.ClientDrivenBeanInfoImpl.prepare(ClientDrivenBeanInfoImpl.java:979)
         at weblogic.ejb20.deployer.EJBDeployer.setupBeanInfos(EJBDeployer.java:983)
         at weblogic.ejb20.deployer.EJBDeployer.prepare(EJBDeployer.java:1283)
         at weblogic.ejb20.deployer.EJBModule.prepare(EJBModule.java:477)
         at weblogic.j2ee.J2EEApplicationContainer.prepareModule(J2EEApplicationContainer.java:2962)
         at weblogic.j2ee.J2EEApplicationContainer.prepareModules(J2EEApplicationContainer.java:1534)
         at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1188)
         at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1031)
         at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer(SlaveDeployer.java:2602)
         at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2552)
         at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2474)
         at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:798)
         at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:507)
         at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:465)
         at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    Any clue?, what its talking about?
    Thanks
    Naresh

    Hi,
    I am trying to deploy an EJB module have 4-5 EJB's on weblogic 8.1 through JBuilder.
    I am getting following error during deployment.
    Exception:weblogic.management.ApplicationException: prepare failed for Sample.jar
         Module: Sample.jar     Error: Exception preparing module: EJBModule(Sample.jar,status=NEW)
    Unable to deploy EJB: SampleBean from Sample.jar:
    weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot export non
    clusterable object with jndiName ]
         at weblogic.utils.Debug.assertion(Debug.java:57)
         at weblogic.rmi.extensions.server.ServerHelper.exportObject(ServerHelper.java:272)
         at weblogic.ejb20.internal.BaseEJBHome.setup(BaseEJBHome.java:95)
         at weblogic.ejb20.internal.StatelessEJBHome.setup(StatelessEJBHome.java:67)
         at weblogic.ejb20.deployer.ClientDrivenBeanInfoImpl.prepare(ClientDrivenBeanInfoImpl.java:979)
         at weblogic.ejb20.deployer.EJBDeployer.setupBeanInfos(EJBDeployer.java:983)
         at weblogic.ejb20.deployer.EJBDeployer.prepare(EJBDeployer.java:1283)
         at weblogic.ejb20.deployer.EJBModule.prepare(EJBModule.java:477)
         at weblogic.j2ee.J2EEApplicationContainer.prepareModule(J2EEApplicationContainer.java:2962)
         at weblogic.j2ee.J2EEApplicationContainer.prepareModules(J2EEApplicationContainer.java:1534)
         at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1188)
         at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1031)
         at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer(SlaveDeployer.java:2602)
         at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2552)
         at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2474)
         at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:798)
         at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:507)
         at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:465)
         at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    Any clue?, what its talking about?
    Thanks
    Naresh

Maybe you are looking for

  • The Database Structure Has Been Modified

    Good Day! Just want to ask what is the probable reason why upon using SAP, there is a system message " The database structure has been modified. In order to resume the process, all open windows will be closed. Continue?"  Even upon user log in , this

  • Error while importing Configuration Object

    Hello guys, I get this error while I try to import the Configuration Scenario objects from DEV to QAS. Obligatory transport target for business system MDD_BS not found in System Landscape Directory The particular scenario was done by creating a busin

  • Why does Safari no longer play video?

    When IOS 8 came out & the macbook software was also updated around that same time (Nov/Dec 2014?), Safari no longer plays videos. It continuously claims that I need the most recent version of Adobe Flash installed and even though I do that, & other b

  • Where saves facetime the contacts in the snow Leopard operating system?

    Where does facetime save the contacts in the snow leopard operating system? I need the filepath. THX Because: I made a timemachine backup on the snow leopard system and then i've deleated all data from my mac (reason I had too much programs installed

  • How to transfer music from ipod to ipad

    I am needing to know how to transfer music from my ipod to my iphone and ipad...I dont not have a mac computer