ASSERTION_FAILED in class CL_FAA_TD_AMD_MNGR

Hi All,
I run a job for the report RAKOPL02.
I get a Abort message (error).
Please helop how to resolve it ASAP.
Job started
Step 001 started (program RAKOPL02, variant &0000000000004, user ID
ABAP/4 processor: ASSERTION_FAILED
Job cancelled
Regards,
Vaibhav

The user faced a problem while running a report RAKOPL02.
When we checked in SM37 it showed that the job is cancelled because of the error 'ASSERTION_FAILED". We checked in ST22 and found the blow mentioned steps in Error Log :
Short text
    The ASSERT condition was violated.
What happened?
    In the running application program, the ASSERT statement recognized a
    situation that should not have occurred.
    The runtime error was triggered for one of these reasons:
    - For the checkpoint group specified with the ASSERT statement, the
      activation mode is set to "abort".
    - Via a system variant, the activation mode is globally set to "abort"
      for checkpoint groups in this system.
    - The activation mode is set to "abort" on program level.
    - The ASSERT statement is not assigned to any checkpoint group.
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "ASSERTION_FAILED" " "
    "CL_FAA_TD_AMD_MNGR============CP" or "CL_FAA_TD_AMD_MNGR============CM00A"
    "IF_FAA_TD_AMD_MNGR~SET_TMINTRVL"
Hope this detailed information helps.
Regards,
Vaibhav

Similar Messages

ASSERTION_FAILED when Activate a DTP

I got an error message when trying to activate a DTP. Does anyone know how to fix it? Thanks!
Runtime Errors ASSERTION_FAILED
Date and Time 03/27/2007 14:29:57
Short dump has not been completely stored (too big)
Short text
 The ASSERT condition was violated.
What happened?
 In the running application program, the ASSERT statement recognized a
 situation that should not have occurred.
 The runtime error was triggered for one of these reasons:
 - For the checkpoint group specified with the ASSERT statement, the
 activation mode is set to "abort".
 - Via a system variant, the activation mode is globally set to "abort"
 for checkpoint groups in this system.
 - The activation mode is set to "abort" on program level.
 - The ASSERT statement is not assigned to any checkpoint group.
Error analysis
 The following checkpoint group was used: "No checkpoint group specified"
 If in the ASSERT statement the addition FIELDS was used, you can find
 the content of the first 8 specified fields in the following overview:
 " (not used) "
 " (not used) "
 " (not used) "
 " (not used) "
 " (not used) "
 " (not used) "
 " (not used) "
 " (not used) "
Trigger Location of Runtime Error
 Program CL_RSAR_PSA===================CP
 Include CL_RSAR_PSA===================CM006
 Row 152
 Module type (METHOD)
 Module Name UPDATEDIRECTORY_TABLES
Source Code Extract
Line SourceCde
122 i_uni_idc25 = l_codeid
123 i_program_class = 'RSAR_ODS_MAINTAIN'
124 EXCEPTIONS
125 deletion_rejected = 2
126 OTHERS = 3.
127 ENDIF.
128 ENDIF.
129 UPDATE rstsods SET tstpnm = sy-uname
130 timestmp = l_s_ods-timestmp
131 userapp = p_userapp
132 userobj = p_userobj
133 maintprog = ''
134 WHERE odsname = l_s_odsfield-odsname
135 AND version = l_s_odsfield-version.
136 IF sy-subrc = 0.
137 IF i_partitioned = rs_c_true.
138 *-- Entry could exist but includes no partition number,
139 * because the PSA was not partitioned before
140 l_tablnm = p_psa_techname.
141
142 CALL FUNCTION 'RSDU_PARTITIONS_INFO_GET'
143 EXPORTING
144 i_tablnm = l_tablnm
145 IMPORTING
146 e_ts_part_info = l_ts_part_info
147 EXCEPTIONS
148 table_not_exists = 1
149 table_not_partitioned = 2
150 OTHERS = 3.
151
>>> ASSERT sy-subrc = 0.
153
154 DESCRIBE TABLE l_ts_part_info LINES l_num_partitions.
155 READ TABLE l_ts_part_info INDEX l_num_partitions INTO l_s_part_info.
156 l_highest_partvalue = l_s_part_info-high_value.
157
158 UPDATE rstsods SET partno = l_highest_partvalue
159 WHERE odsname = l_s_odsfield-odsname
160 AND version = l_s_odsfield-version.
161
162 ENDIF.
163 ELSE.
164 * create new version
165 l_s_ods-odsname = l_s_odsfield-odsname.
166 l_s_ods-version = i_next_version.
167 l_s_ods-dateto = rsods_c_dateto_01019999.
168 l_s_ods-datefrom = rsods_c_datefrom_01011998.
169 l_s_ods-objstat = rs_c_objstat-active.
170 l_s_ods-odsname_tech = p_psa_techname.
171 l_s_ods-progname = i_progname.

I guess it is Notes 1012607.
Summary
Symptom
Note: This note is relevant only for 'ORACLE' and 'MSSQL' database systems. After you implement this note, you must also carry out some manual corrections (see 'Solution', below).
If you are working with database system DB2 or MSSQL, also implement Note 1022026.
When data is written or activated or when a DataStore object is activated, the following errors occur:
Similar errors may also occur for the DataSource and data transfer process (DTP).
ORA-01502: index 'SAPDAT./BIC/A*KE' or partition of such index is in unusable state
Column 'PARTNO' is partitioning column of the index '/BIC/A*KE'. Partition columns for a unique index must be a subset of the index key.
error #RSDU_TABLE_TRUNC_PARTITION_MSS: Error While Calling Module MSS_TRUNC_PARTITION_FROM_TABLE Message no. 0U534#.
ASSERTION_FAILED in class 'CL_RSAR_PSA'.
Error message D0 313 in the activation log. The message does not contain any text. In the activation log it is displayed as an empty line with a red traffic light.
Other terms
DBIF_RSQL_SQL_ERROR, D0 313, D0313
Reason and Prerequisites
Reason:
The partitioning logic of the persistent staging area (PSA) service does not recognize that the PARTNO field must not be deleted.
For write-optimized DataStore objects, the active table is created as a partitioned table, even though a global index is used to ensure uniqueness of data. This is not compatible with the 'drop of a partition'.
In the DataSource maintenance, you have the option to define key fields. For the first 16 key fields of the DataSource field list, a global index is also created.
If 'semantic groups' are used in the DTP, the error stack is created with a global index.
Solution
Implement the corrections by importing the Support Package or by implementing the advance correction. As a result, the 'range' partitioning is deactivated in the PSA service as soon as a global index is requested.
The error can occur for the objects: DataStore (only the write-optimized type), DataSource, and error stack of the DTP.
This note contains the 'RSAR_PSA_PARTITION_CHECK' program, which you can use to analyze the objects. Execute the program. Use the search strings listed in section 5), depending on whether you want to analyze individual objects or object types. If you do not make an entry in the PODSTECH field (technical name of the PSA), the system checks all existing PSA tables, which may take some time.
You can use transaction SLG1 to display the log for 'RSAR_PSA_PARTITION_CHECK'. Select the following:
 Object = 'RSAR'
Subobject = 'METADATA'
Ext. Identif. = 'RSAR_PSA_PARTITION_CHECK'
You must make different manual changes to repair each of the different object classes.
1) DataStore (write-optimized)
Incorrect DataStores are identified in the log of the check program with the PSA type 'FASTSTORE'. The name after 'Obj:' is the technical name of the corresponding DataStore object.
For a DataStore object of the 'write-optimized' type, a global index with relation to the semantic key is created if the 'Do Not Check Uniqueness of Data' indicator is not set.
Check if you need to ensure that data is unique in your scenario.
1. If you do not need the data to be unique:
 Set the flag: 'Do Not Check Uniqueness of Data', and activate the DataStore object. The DataStore object is now consistent again.
2. If you need unique data:
In this case, you must departition and convert the table.
If the error occurred when you activate the DataStore itself or when you activate the data, you must activate the DataStore object after converting the active table. You need the technical name of the active table for the conversion. You can get this directly from the log of 'RSAR_PSA_PARTITION_CHECK'. If you know which DataStore contains errors, find the technical name of the active table in the Maintain DataStore screen by choosing:
 <Extras> ->
 'Information (logs/status)
Choose 'Dictionary DB status' to access the status POPUP. You can find the technical name in the 'Active table' field.
If the table does not contain any data according to the 'RSAR_PSA_PARTITION_CHECK' log, the table is automatically departitioned when you activate the DataStore.
If the table contains data, you must departition and convert the table as described in section 4.
After that, use the AdminWorkBench (transaction RSA1) to activate the DataStore object.
2) DataSource:
Incorrect DataSources are identified in the log of the check program with the PSA type 'NEW_DS'. The 'Obj:' indicator is followed by two additional character strings. The first is the technical name of the relevant DataSource. The second is the technical name of the source system.
PSA tables for DataSources with a key definition must be departitioned.
The name of the PSA table for the DataSource is contained directly in the 'RSAR_PSA_PARTITION_CHECK' log.
If the table does not contain any data according to the 'RSAR_PSA_PARTITION_CHECK' log, the table is automatically departitioned when you activate the DataStore.
If the table contains data, you must departition and convert the table as described in section 4.
Call transaction 'RSDS' and enter the technical name of the DataSource and the source system and activate the DataSource.
3) Error stacks for the DTP:
Incorrect Error Stacks are identified in the log of the check program with the PSA type 'ERRORSTACK'. The 'Obj:' indicator is followed by the technical name of the relevant DTP. There may be more than one error stack table for each DTP.
PSA tables for ErrorStack with a key definition must be departitioned.
The name(s) of the PSA Error Stack table(s) for the DTP is/are contained directly in the 'RSAR_PSA_PARTITION_CHECK' log.
If the table does not contain any data according to the 'RSAR_PSA_PARTITION_CHECK' log, the table is automatically departitioned when you activate the DTP.
If the table contains data, you must departition and convert the table as described in section 4.
Now call transaction RSDTP, enter the technical name of the DTP and activate the DTP.
4) Departitioning and converting
The following manual conversion using transaction SE14 is supported only for ORACLE database systems. Open a problem message under component BW-SYS-DB-MSS if you need to convert tables on a MSSQL database system.
Call transaction SE14 (Database Utility) for the tables you need to convert. Select 'Table', enter the technical name of the table and choose 'Edit'.
On the next screen, choose 'Storage Parameters' (Shift+F6).
On the next screen (Storage Parameters), choose 'For new creation' (F8).
In the dialog box that then appears, select 'Current database parameters' and copy it by choosing 'Enter'.
You now get an overview of the storage parameters <Tables>, <Indexes> and existing <Partitions>.
Under the 'Table' node, if the content of the 'TABLESPACE' field is initial, enter the value from the 'TABLESPACE' field of the first partition.
For the field 'PARTITIONED BY', choose the option 'No partitioning' and save your changes.
Exit the screen with the storage parameters.
On the next screen, ensure that the 'Save data' radio button after 'Activate and adjust database' is selected, then execute the conversion. You execute the conversion by choosing 'Force Conversion' in the <Extras> menu.
Next, you must correct the PARTNO indicator in table RSTSODS. To do this, call transaction RSRV and execute the test 'Consistency Between PSA Partitions and SAP Administration Information'. You can find this test in transaction RSRV under
<All Elementary Tests>
 -> <PSA Tables>
You can execute the RSRV test and repair for all converted tables at once. For further information about how to use transaction RSRV in this case, see the online documentation. You can call the online documentation by choosing the 'Info' icon.
5) Search strings:
a) Use the search string '/BI+/B*' to find the relevant entries for the DataSource, the change logs and the error stack.
b) Use the search string '/BI+/A*00' to find the relevant entries in the active tables for the DataSource objects.
SAP NetWeaver 2004s BI
 Import Support Package 13 for SAP NetWeaver 2004s BI (BI Patch 13 or SAPKW70013) into your BI system. The Support Package is available once Note 991093 "SAPBINews BI 7.0 Support Package 13", which describes this Support Package in more detail, has been released for customers.
In urgent cases, you can implement the correction instructions as an advance correction.
You must first implement Notes 932065, 935140, 948389, 964580, 969846, 975510, 983212 and 1000448, which provide information about transaction SNOTE. Otherwise, problems and syntax errors may occur when you deimplement certain notes.
To provide information in advance, the notes mentioned above may already be available before the Support Package is released. In this case, the short text of the note still contains the words "Preliminary version".
Before you implement an advance correction (if one exists and you want to implement it), see Note 875986. This contains notes regarding the SAP Note Assistant and these notes prevent problems during the implementation.

Dump when I activate a transformation with a formula.

Hi All,
I 've different problems with transformations....
Particulary when I activate a transformation with a formula, it terminates in dump with exception "ASSERTION_FAILED" in class CL_RSRAN_FOBU_APPL method GET_CODE.
I' ve read the note 1050275 (ASSERTION_FAILED in CL_RSTRAN_FOBU_APPL->GET_CODE) that seems to have the solution for this problem, but the correction instruction proposed is already applied and the problem still running...
Infact the note suggest to apply the support package SAPKW70014...and I've SAP_BW 700 with SAPKW70015.
I've also read the note 1055217 and 998730, but I'm not able to find the right solution.
How I can solve the problem?
Thank's a lot,
Valentina.

Hello Valentina,
does this happen with all Transformations, or only with once into the DSOs or InfoCubes.
If only into the above mentioned target I have a possible solution for you.
I had a similar problem recently, you are probably also working with some Master Data Update. The InfoObjects that you are updating into the DSO or InfoCubes are being updated(With Master Data Transformaion) with Master Data as well, these need to be active, otherwise the check goes into the following tables(please see below) and if there are inconsistences it ends with "ASSERTION_FAILED".
These the relevant tables for Routines and Formulas, please check them as well:
Formulas are maitained in the follwing tbls:
RSAFORM
RSAFORMMAP
RSAFORMT
RSFOBUEV000
RSFOBUEV001
Routines:
RSAABAP
RSAABAPINV
RSARFIELDS
RSAROUT
RSAROUTT
Hope this helps a bit.
Kind Regards,
Patrik Hengerics

ASSERTION_FAILED in XD01,XD02 while maintaining Industry in Marketing tab

While creating a new customer (XD01) or changing an existing customer (XD02),
in the Marketing tab, Industry field, when a value is maintained,
it results in runtime error ASSERTION_FAILED.
This occurs in line:
assert condition lv_ind_sector_type is not initial.
Class/Interface: FSBP_IND_SECTOR_MAPPER
Method:     MAP_TRBP_DEB_TO_BP
the piece of code relevant to this line is
    7   if iv_brsch is initial.
    8     raise exception type cx_parameter_invalid.
    9   endif.
   10
   11 * assure, that industry sector type is defined
   12   if iv_ind_sector_type is initial.
   13     lv_ind_sector_type = get_standard_ind_sector_type( ).
   14   else.
   15     lv_ind_sector_type = iv_ind_sector_type.
   16   endif.
   17   assert condition lv_ind_sector_type is not initial.
the value maintained in the industry is filled in iv_brsch.
Here, the field iv_ind_sector_type is blank
and so is filled by line 13 (method: get_standard_ind_sector_type)
Code for Method: get_standard_ind_sector_type is as given below:
method get_standard_ind_sector_type .
if standard_ind_sector_type is initial.
    select single istype from tb038
      into standard_ind_sector_type
      where istdef = true.
endif.
rv_ind_sector_type = standard_ind_sector_type.
endmethod.
There are no values in the table TB038, which is why the select statement fails, further resulting in the short dump.
What is the significance of the table TB038, in relation to customer creation/updation (Industry field).
Is there any other way through which this issue can be tackled with? Kindly let me know.
Regards,
Smruthi S. Acharya

Thank you very much, Srini.
I understand what you say, but does it mean that the note 727205 has already been implemented in our system?
Because the exact issue is:
Earlier (say a month ago), users were able to create customers in XD01, maintaining the industry while creation. Also, users were able to edit exisiting customers and maintain the industry for them.
However, now, when users get a runtime error ASSERTION_FAILED, while creating as well as changing existing customers Industry information.
What could possibly go wrong suddenly?
Moreover, its a standard code, no customising involved.
Thanks & Regards,
Smruthi

Catch assertion_failed on create object

Hi,
I create an object based on user input. When the user makes a typo, I get an assertion_failed dump, although I've encapsulated it wit a try catch on cx_root.
How can I catch an assertion_failed in order to prevent a dump?
Eddy

@Eddy
You can do a simple check before creating instance of this class
DATA: gr_typedescr TYPE REF TO cl_abap_typedescr,
      gr_obj        TYPE REF TO object.
DATA: gt_params     TYPE abap_parmbind_tab.
CALL METHOD cl_abap_typedescr=>describe_by_name(
EXPORTING
p_name         = 'CL_GUI_ALV_GRID2'
RECEIVING
p_descr_ref    = gr_typedescr
EXCEPTIONS
type_not_found = 1
OTHERS         = 2 ).
IF sy-subrc = 0.
CREATE OBJECT gr_obj TYPE ('CL_GUI_ALV_GRID2')
    PARAMETER-TABLE gt_params.
ENDIF.
@Tomek
If the result of log_exp is false, for an always active assertion (without the addition ID) an untreatable exception is triggered and the program terminates with the runtime error ASSERTION_FAILED.
Actually this depends on configuration made in SAAB . The processing might still go on if other config option is set.
Regards
Marcin

Runtime Error : ASSERTION_FAILED while clicking on shop button to create SC

Hi Experts.
We are using SRM 7.0
When i am clicking on shop button to create shopping cart getting
RUNTIME ERROR : ASSERTION_FAILED
Termination occurred in the ABAP program "/SAPSRM/CL_CH_WD_GAF_FACTORY==CP" -
in "SET_GAF_PROVIDER".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 29.
Please suggest what should I do ?
Thanks and Regards
Bumhwan oh

Hi Venkatesh.
Thanks for your reply.
But Note 1341605 has nothing to do with what we are discussing.
My problem is why runtime error result when I click Shop button in Employee Self-Service.
Here is source code in method SET_GAF_PROVIDER.
IF io_fpm_gaf IS NOT BOUND. "SRM 6.0 coding (without FPM)
Get Class Name from explicit configuration (stored in mapped context)
    lo_context_node = io_wd_context_node->get_child_node( name = 'CONFIGURATION_NODE' ).
    lo_context_element = lo_context_node->get_element( ).
    lo_context_element->get_attribute(
      EXPORTING
        name = `CLASS_NAME`
      IMPORTING
        value = lv_class_name ).
    CATCH SYSTEM-EXCEPTIONS create_object_class_not_found = 4.
      CREATE OBJECT lo_gaf_provider
        TYPE
          (lv_class_name)
        EXPORTING
          io_wd_context_node = io_wd_context_node.
    ENDCATCH.
    " Cause: The class specified in the TYPE addition does not exist
    " [..] handle exception / abort use case
      ASSERT FIELDS 'GAF Provider Class Name is not valid' lv_class_name
           CONDITION sy-subrc = 0.

EREC: ASSERTION_FAILED dumps (dispatch_nw7_event)

Hi all,
we are on EhP4 SP8 and using the separated scenario (frontend and backend on 2 different servers).
On the frontend side of the productive system, on a daily basis, we are registering tens of short dumps like:
ASSERTION_FAILED
The ASSERT condition was violated.
in the method dispatch_nw7_event of class CL_NW7_VIEW_ELEMENT_ADAPTER.
I've read the other threads about similar cases and already applied the note 1559475, but it is not enough.
Do you know which is the reason behind and if there's a way to fix it?
I'm not even able to replicate it on a dev environment.
Thanks in avance.
Kind regards.
Angelo

Thanks a lot, Sally and Nicole, I'll follow your hints.
I've seen the references of this dump during the job search application and at the login step.
Moreover, from time to time, we have also the dump described in the wiki, on the preferences page
(IT 5106), but I'd like to have an official fix by SAP for this instead of deleting the reference (1) in the table.
Should we also consider the browser version used by the external candidates or do you think
this can not generate such dumps?
Best regards.
Angelo

How do i open a web page with VeriSign Class 3 Extended Validation SSL SGC SS CA certfificate i can't open web pages with this, how do i open a web page with VeriSign Class 3 Extended Validation SSL SGC CA certfificate i can't open web pages with this

how do i open a web page with VeriSign Class 3 Extended Validation SSL SGC SS CA ?

Hi
I am not suprised no one answered your questions, there are simply to many of them. Can I suggest you read the faq on 'how to get help quickly at - http://forums.adobe.com/thread/470404.
Especially the section Don't which says -
DON'T
Don't post a series of questions in a single post. Splitting them into separate threads increases your chances of a quick answer.
PZ
www.pziecina.com

Previewing an image before uploading it using the FileReference class

Previewing an image before uploading it using the FileReference class in flash player 3 not in SDK4

Previewing an image before uploading it using the FileReference class in flash player 3 not in SDK4

Previewing an image before uploading it using the FileReference class in flex 3

Previewing an image before uploading it using the FileReference class in flex 3 ?

hai,
 when this code is used in my application ,i got the name of image and new frame is added each time .But image is not displayed.....
The code starts like this
<?xml version="1.0" encoding="utf-8"?>
<mx:Canvas xmlns:fx="http://ns.adobe.com/mxml/2009"
 xmlns:s="library://ns.adobe.com/flex/spark"
 xmlns:mx="library://ns.adobe.com/flex/mx" initialize="init()" backgroundColor="white" width="100%" height="100%">
 <fx:Script>
<![CDATA[
 import mx.controls.Alert;
 import mx.messaging.Channel;
 import mx.messaging.ChannelSet;
 import mx.messaging.channels.AMFChannel;
 import mx.rpc.events.ResultEvent;
 import mx.controls.Image;
 import spark.events.IndexChangeEvent;
 import mx.managers.DragManager;
<mx:DataGridColumn headerText="Dimension Value" width="10" dataField="dimensionValue"/>
 <mx:DataGridColumn headerText="Unit Nmae" width="10" dataField="dimensionUnitName"/>
 </mx:columns>
 </mx:DataGrid>
 <mx:Spacer width="2%"/>
 </mx:HDividedBox>
 </mx:VBox>
 <mx:Spacer height="0"/>
 <mx:VBox width="100%">
 <s:HGroup height="90" top="0" left="0" right="0" verticalAlign="justify" gap="10" paddingLeft="5" paddingRight="5" paddingTop="5" paddingBottom="5">
 <s:Button id="btn_loader" top="5" bottom="24" width="100" label="load" click="loadImages()"/>
 <s:Group width="100%">
 <s:Group name="cl" top="0" left="0" bottom="0" width="20" mouseOver="//scroll_on(event)" mouseOut="//scroll_off(event)">
 <s:BitmapImage source="@Embed('../assets/left.jpg')" top="0" left="0" bottom="0" right="0" fillMode="scale"/>
 </s:Group>
 <s:List id="imgList" skinClass="skins.ListSkin" top="-3" left="27" right="28" bottom="10"
 dataProvider="{ImageCollection}" itemRenderer="Image_Render">
 <s:layout>
 <s:HorizontalLayout gap="0"/>
 </s:layout>
 </s:List>
 <s:Group name="cr" top="0" right="0" bottom="0" width="20" mouseOver="//scroll_on(event)" mouseOut="//scroll_off(event)">
 <s:BitmapImage source="@Embed('../assets/right.jpg')" top="-1" left="0" bottom="0" right="0" fillMode="scale"/>
 </s:Group>
 </s:Group>
 </s:HGroup>
 <s:SkinnableContainer id="dropCanvas" top="100" left="5" right="5" bottom="5" backgroundAlpha="1.0" alpha="1.0"
 dragEnter="dropCanvas_dragEnterHandler(event)"
 dragDrop="dropCanvas_dragDropHandler(event)" contentBackgroundColor="#914E4E" backgroundColor="#F7F7F7">
 </s:SkinnableContainer>
 </mx:VBox>
 <mx:Spacer height="5"/>
 </mx:VDividedBox>
 </mx:Panel>
</mx:Canvas>

Get the values from the bean class?

Hi Praveen and all can u please suggest in this,
I have developped an application In that Create One java class that Extends PageProcesscomponenet and utilizing the Bean That have the Connetion method and retriving the query Based on the Logon customer and spoof customer.
this functionality I have developped in Pageprocessor component.
The same functinality I am utilizing another java Class that Extends AbstractPortalcomponent and utilizing the same Bean.
But the problem both java classes for I used one Jsp only Dynmic spoof customer will come from the JSP Input filed.
In the new Java Class How can I capture the Event When I click the Buttong the InputField value capturing into the AbstractPortalcomponent Class.
I tried like this but It comes as Null Value.
Event event = myContext.getCurrentEvent();
                          if(event!=null)
                              InputField ip= (InputField) myContext.getComponentForId("spoofCust");
                              String spoofCust=ip.getValue().toString();
Please suggest me in this.
What is wrong with this.
Thanks,
Lohi.
Message was edited by:
        Lohitha M

Lohitha,
Try replacing your two lines of code:
InputField ip= (InputField) myContext.getComponentForId("spoofCust");
String spoofCust=ip.getValue().toString();
with:
InputField ip = (InputField) getComponentByName("spoofCust");
String spoofCust = ip.getValueAsDataType().toString();
Let me know how that works for you.
-John

Get the values from Exception class

Hi all ..
In class i have raised one exception
when i catch this exception in my program i m able to get the
error message but i need to get all the parameters that i pass
when i raise the exception ...
i have raised like this
 RAISE EXCEPTION TYPE cx_bapi_error
 EXPORTING
 textid = cx_bapi_error=>cx_bo_error
 class_name = 'ZHS_'
 log_no = wa_bapi_return-log_no
 log_msg_no = wa_bapi_return-log_msg_no
 t100_msgid = wa_bapi_return-id
 t100_msgno = wa_bapi_return-number
 t100_msgv1 = wa_bapi_return-message_v1
 t100_msgv2 = wa_bapi_return-message_v2
 t100_msgv3 = wa_bapi_return-message_v3
 t100_msgv4 = wa_bapi_return-message_v4
 STATUS = lt_status
and caught the exception like this in my program
 CATCH cx_bapi_error INTO go_error.
 gd_text = go_error->get_text( ).
 EXIT.
ENDTRY.
in this i m just getting the class name which i have passed in exception
i need all other parameters that i have passed ..
if u have any idea pls let me know ..
Thanks in advance ...

Hello Jayakumar
Usually the attributes of standard exception classes are defines as public and read-only. Thus, you should be able to use the following coding:
DATA:
go_error TYPE REF TO cx_bapi_error. " specific exception class !!!
TRY.
RAISE EXCEPTION TYPE cx_bapi_error
EXPORTING
textid = cx_bapi_error=>cx_bo_error
class_name = 'ZHS_'
log_no = wa_bapi_return-log_no
log_msg_no = wa_bapi_return-log_msg_no
t100_msgid = wa_bapi_return-id
t100_msgno = wa_bapi_return-number
t100_msgv1 = wa_bapi_return-message_v1
t100_msgv2 = wa_bapi_return-message_v2
t100_msgv3 = wa_bapi_return-message_v3
t100_msgv4 = wa_bapi_return-message_v4
STATUS = lt_status.
CATCH cx_bapi_error INTO go_error.
gd_text = go_error->get_text( ).
WRITE: go_error->t100_msgid, " perhaps the attributes have different name
 go_error->t100_msgno, " check attribute names in SE24
EXIT.
ENDTRY.
Regards
Uwe

Problem with setContentPane() in JFrame class

I recently discovered a problem with the setContentPane method in the JFrame class. When I use setContentPane(Container ..), the previously existing contentPane remains in the stack. I have tried nullifying getContentPane(), and all manner of things, but, each time I use setContentPane, I have another instance of a JPanel in the stack.
I'm using code similar to setContentPane(new CustomJPanel()); and each time the user changes screens, and a similar call to that is made, the old CustomJPanel instance remains in the stack. Can anyone suggest a way around this? On their own the panels do not take up very much memory, but after several hours of usage, they will build up.

I tried what you suggested; it only resulted in a huge performance decrease. The problem with memory allocation is still there.
Here is the method I use to switch screens in my app:
public static void changeScreen (JPanel panel){
 try{
 appFrame.setTitle("Wordinary : \""+getTitle()+"\"");
 appFrame.setContentPane(panel);
 appFrame.setSize(appFrame.getContentPane().getPreferredSize());
 appFrame.getContentPane().setBackground(backColour);
 for (int i = 0; i < appFrame.getContentPane().getComponents().length; i++)
 appFrame.getContentPane().getComponents().setForeground(textColour);
 //System.out.println("Background colour set to "+backColour+" text colour set to "+textColour);
 appFrame.validate();
 catch (Exception e){
 //System.out.println("change");
 e.printStackTrace();
And it is called like this:
changeScreen(new AddWordPanel());The instantiation of the new instance is what is causing the memory problems, but I can't think of a way around it.

Problem with Outer and Inner Classes....or better way?

Right now I'm trying to create an Inner class.
My .java file compiles ok, and I create my jar file too.
But when I try to instantiate the Inner class, it fails:
java.lang.NoClassDefFoundError: com/myco/vlXML/vlXML$vlDocument.
Here's the class code:
public class vlXML{
    private ArrayList myDocList=new ArrayList(); //holds documents
    public vlXML(){
    private class vlDocument{
        public vlDocument(){
        //stuff goes here
    public vlDocument vlDOC(){
        return new vlDocument();
    public void addDocument(){
        vlXML xxx=new vlXML();
        vlDocument myDoc=xxx.vlDOC();
        myDocList.add(myDoc);
    public int getNumDocs(){
        return myDocList.size();
}Then, from a jsp page, I call:
vlXML junk1=new vlXML();
junk1.addDocument();...and get the error...
Can someone help me figure out why it's failing?
Thanks....

You nailed it - thanks....(duh!)
While I have your attention, if you don't mind, I have another question.
I'm creating a Class (outer) that allows my users to write a specific XML file (according to my own schema).
Within the XML file, they can have multiple instances of certain tags, like "Document". "Document"s can have multiple fields.
Since I don't know how many "Documents" they may want, I was planning on using an Inner Class of "Document", and then simply letting them "add" as many as necessary (thus the original code posted here).
Does that seem like an efficient (logical/reasonable) methodology,
or is there there something better?
Thanks Again...

JBO:33001 bc4j.xcfg file not found in class path

Hi,
I am yet another victim of the age-old error JBO:33001 bc4j.xcfg file not found in class path, When i have my BC4JApp.jar in Tomcat Web-inf/lib directory. All the other jar files and class files in my webserver-application web-inf classes and lib directory works.
But Tomcat server is not able to read this bc4j.xcfg file. I can see in my jar file that this bc4j.xcfg exists and in the specified package directory. still the problem persists. My BC4JApp.jar is perfectly working when i use JDeveloper. but not when i use tomcat4.0 and call a JSP using BC4JApp.jar from browser (My environment is Jdeveloper3.2, Tomcat4.0+IIS in middle tier and oracle 8i as DB, everything on windows2k)
I have gone through almost all the threads possible that relates to this error in this form. None of them have a answer except to say "put the file in classpath". and last reply is "will fix in jDeveloper 9i. So what happens to us who are working in Jdeveloper 3.2?
1. I have this file in my jar file.
2. I also tried creating a seperate directory manually, with the same name as my package under web-inf/classes, web-inf/lib , just under web-inf directory and atlast under approot directory also. I tried having my package directory containing bc4j.xcfg in these folders one at a time and also tried having this directory in all these folders at the same time.
Still no solution.
Itz frustrating that neither proper documentation nor a right url page nor i am aware of available addressing this. page links given in above threads only gives me the wonderful page of ie's "Page cannot be displayed".
Is there a answer to this error and my problem. If this doesn't work, then i have to all the way develop from scratch creating my jsp using JDBC calls and Stored packages etc.
I don't want to give up on this Jdeveloper at this final moment because if this bc4j.xcfg file is found, my application will work perfectly. on these final moments, if this doesn't work, i am frightened to imagine to develop my application in standard way. Atlast, if thatz the option left,we have to do that bcos our production date is close by.
Please can some one in this forum or Jdeveloper help me to solve this problem. I am desperate and very urgent.
Waiting for a reply from Jdev team very much...
( I just posted in the other thread which is pretty old, dated backto May 2001, which was relevant to this error. Just to make sure it is noticed, I am posting it seperately too)
Thanks
Hari(2/3/02)

Hi All,
For those who are following this thread, I got a solution for this error with the help of Jdev Team.
This solution may work, if you have deployed your application in Tomcat4.0.1. This is the environment in which I work and tested.
As you may be aware, Tomcat ignores value in CLASSPATH variable.
To see any files that are existing or newly deployed, it has it own way of detecting it.
Addition information on Tomcat working, you can follow this link,
http://jakarta.apache.org/tomcat/tomcat-4.0-doc/index.html
Coming to point, Tomcat has got five classloaders and each classloader invoked, looks in their related directories for files in following order.
1. /WEB-INF/classes of your web-application
2. /WEB-INF/lib/*.jar of your web application
3. BootStrap classes of your JVM (Tomcat's $JAVA_HOME/jre/lib/ext)
4. System class loader classes($CATALINA_HOME/bin/bootstrap.jar,CATALINA_HOME/lib/tools.jar)
5. $CATALINA_HOME/common/classes
6. $CATALINA_HOME/common/lib/*.jar
7. $CATALINA_HOME//classes
8. $CATALINA_HOME/lib/*.jar
So All your individual application related files should be deployed in your application's WEB-INF/classes or WEB-INF/lib directory accordingly.
If your application files are unpacked, they should be deployed or copied under WEB-INF/classes directory
if the files are within a jar, they should be under WEB-INF/lib directory.
If your Jar-files contains bc4j components, then those jar files should be deployed under WEB-INF/lib directory. Also,do the next step to copy all relavant BC4J runtime libraries under lib directory.
IMPORTANT: Please remember to copy and paste all the required BC4j runtime libraries in the Same WEB-INF/lib directory along with your application jar files. This is the real reason which can solve this JBO:33001 to disappear. It worked for me.
To configure your directory for tag-lib uri's, use web.xml to set the taglib-uri attribute.
Put your web.xml and DataTags.tld in the WEB-INF directory.
Your simple web.xml may look like as follows.
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
 <taglib>
 <taglib-uri>
 /webapp/DataTags.tld
 </taglib-uri>
 <taglib-location>
 /WEB-INF/DataTags.tld
 </taglib-location>
 </taglib>
</web-app>
You may then modify this web.xml to suit further requirements of your application.
Remember to stop and restart the Tomcat Server (service) by using shutdown and startup scripts after updating any jar files/class files/ JSP or source files deployed in Tomcat.
Sometimes, only this helps even though your context's reloadable attribute is set to true in Tomcat Server's server.xml file.
Hope this above information helps you to solve this error in Tomcat environment. My Sincere thanks once again to Juan and Jdev team for their help and efforts to solve this problem.
Thanks
Hari

ASSERTION_FAILED in class CL_FAA_TD_AMD_MNGR

Similar Messages

Maybe you are looking for