Asset Balances report for reconciliation with G/L account balances

Hi all,
the assets in the dev system are in 2001
Im derpreciating them for every year and tryin to bring them into 2007.
but when I depreciate evry year I cant check the asset balance of that year.
The standard SAP report S_ALR_87011964 can only be used to check assets balances of current year i.e. 2007.
How can I check the asset balances of year Im depreciating like 2002 or 2003 for reconcialition with G/L account.
Suggest me a T-code or a procedure
Thank you all

Hello
a. Use asset report S_ALR_87011990 and
b. Sort Version - 0003
c. Give your General ledger account if need be in field BALANCE SHEET ACCOUNT.
d. Use History Version - 0001
Hope this helps
Regards
Anantha

Similar Messages

Standard report for Reconciliation report for Asset Accounting and GL

is ther any standard report for Reconciliation report for Asset Accounting and GL

hi
functional specification r reqired for this issue
regards
venkataswamy

KE24 Report comparison with FI GL account balance report

Hi Friends,
I'm comparing KE24 transaction code COPA actual line item balance with FI GL account balance report, but I'm not able to match it/not sure how to match it.
Could you please let me know how to compare these two reports mainly to know whether all the balances in FI are moving to COPA properly. Also please let me know how the values are being extracted for this KE24 transaction code.
Thanks & Regards,
Dwarak

This comparison can only be done with a thorough knowledge of the config that was made to transfer information into the COPA system. It is COMPLETELY implementation specific. It generally is grouped into several areas - Revenue, Cost of goods sold @standard, cost of goods sold period based adjustments (E.g. variances) and overheads.
Here is some VERY broad guidelines:
Revenue method will depend on whether you are using "vanilla" sales of inventory from SD, or whether you use resource related billing in PS. Further you will need to know which condition types post to which GL Accounts, and to which value fields.
Cogs method will depend on the sames differences, also whether you are using material master price (VPRS), or whether you are using standard cost estimate. If you are using standard cost estimate, you need to know the cost components used, and which value fields they post to.You also need to know which GL account(s) is posted to. This is based on the valuation class in table 30. Alternatively, for resource related billing you have to know how the DIP profile was set up.
You need to know how your production variances are posted, your purchase price variances and your overhead variances on production cost centres.
Overheads can be posted directly from FI, from MM, or settled from an internal order or project. Alternatively, they are assessed from cost centres, to PA using assessment rules.
You also need to know whether there are any statistical value fields, which should be excluded from the reconciliation.

Report for material with sloc,qty available, and production order

hi friends, i need advice on getting this report for material with qty and specific sloc with the corresponding Prodn order numbers. in mb51 i could get all these details except the prodn order no. could you advice me please?

to make sure you know how to do this.
In the material document list, hit "Ctrl+F8" on your keyboard.
A window will pop up. Click on the button position and look for "order" in the list of available fields. That should do it.
Rgds.

Trial Balance report For FI

If any one have trial balance report for FI pls send me..

Hi,
Check this.
The standard trial Balace (Tcode:S_ALR_87012279) report

Anyone get a huge "Problem Report for iDVD" with hundreds of lines of information?

Anyone get a huge "Problem Report for iDVD" with hundreds of lines of information? This happens right before the DVD would be finished burning but instead crashes and leaves the long report your have to scroll down several times to read. I had to take several screen captures of the screen to get the WHOLE report. Here is two:
(If there is another thread on this - just answer the question or refer me to it. I'm past due on a big project. Don't have time to read all 21,000 discussions in the iDVD thread. Be kind. Thanks )

Some things to try first:
1. Disconnect any and all 3rd party devices that didn't ship with your mac directly from apple (both FW and USB included).
2. Restart your mac without any 3rd party devices attached whatsoever. That includes ext. hard drives, blue tooth devices, and any third party memory product/s. Basically, anything that doesn't come directly from apple has to go (at least while troubleshooting).
3. Need you to dispose of the plist for iDvd also. Go to you Home folder, the one that looks like a house > Library > Preferences > com.apple.iDvd.plist and drag and drop this file/s to the trash. Make sure to first quit iDvd prior to disposing of this pref. file/s.
4. Run apple's disc utility and repair permissions. Applicantions > Utilities > Disc Utility > Repair Permissions.
5. Restart your mac yet again, and try iDvd one more time.
6. If it's still at issue then please open iDvd from a separate user account and try your project one more time. If you don't know how to create a separate user account then just come on back and one of will show you how.
Good luck.
Message was edited by: SDMacuser

Recon with G/L account balance with vendor Balance

Hi,
There is difference in vendor balance with G/L account balance. How to do Reconcilation,
let me know the steps/precess.
Thanks in Advance

Start of by comparing all the documents in the gl recon account to the documents from the ap list (for the same period).
They should match. Put them in a spreadsheet and do look ups. Lots of fun ahead.
pts appreciated.

Report for material gr/ir clearing account display differences

report for material gr/ir clearing account display differences

hi salsa,
There is no such report for the datails of material gr/ir ......
but T code J1ILN and select
Indirect taxes -
> Register -
> Excise tax -
> In J1IN Update Excise register RG23a -
> then Extract rg23a----- > PRint utility program Rg23a
here u can extract all the invoices gr/ir
Through
T code J1I5
J2I5
J2I6
if useful assign points...
regards,
santoshkumar

Asset Legacy data transfer reconciliation with GL

We have recently merged a deactivated company code with our operating company and transferred all Finance processes, open items,master data etc.
We transferred assets using Legacy Data Transfer AB91 (we did not use intercompany asset transfer ABT1N).
We then transferred the Trial Balance.
The asset balances reconcile against the GL accounts for the transferred assets when executing S_ALR_87011964 and FS10N.
However there is a difference in ABST2 which is the same difference as the migrated assets.
I would expect there to be no difference between FI and AA for legacy data transfer
I have also run ABST for all affected GL accounts and there is no difference when executing this report.
Note that the company code migration occurred in January 2008, there is no effect on 2007 year end data.

Hi
You have to take over the GL balance using OASV t.code
regards
Sibichan

Report for Vendors with no transactions

Hi,
I need to know about the Vendor reports. There are several vendors which dont have any transactions at all and we need to identify such vendors. How do we find such vendors? Can anyone suggest me some SAP vendor reports for this purpose?
Regards,
Vinod

Hello,
Please go to transaction code S_ALR_87012082
In output control, you will find a check box "ACCOUNTS NOT POSTED TO". Please tick this check box along with "Normal Balances".
You will get the report of vendors NOT YET POSTED.
Regards,
Ravi

Asset history report for bunch of assets

Hi,
I have created an asset through the following steps
Internal Order KO01
Budgeting T Code KO22
Release of Internal Order KO02
Creation of AUC AS01
Creation of PO ME21N
Now when I see the report AW01N for this asset, everything is available on the asset history sheet. Likewise I need such a report where I can pull out for bunch of assets with the above history informtion like IO No, PO No etc against those assets.
I have some 500 assets for which IO no and PO no I need against each asset.
Please tell me the standard asset report for this.
Regards,
babjee

Hi babjee,
I think you have to use for this an internal order report (line item report?. On the internal orders all information is avaiable. I think this is the reason that you use internal orders!
On the internal order you collect all the posting and the AUC is a cost collector for short term and when you settle it to the Final asset this is the endpoint.
I don't have seen that the information from KO22, KO02, ME21N are direct available in AW01N
Paul

Period Balance Report for Actual/ Commitment only

Hi,
Do we have any report for getting Periodic balance for cost Centre Actual and commitment Balances.
Regards,
Venkat

If there is not a specific YtD report, then it is easy to create one: Using the report painter, copy the existinf report, and amend the columns to reflect not the current month, but from the 1st period to the current month.

Standard Report for PO with Condition Value

HI MM experts,
I have checked all the existing standard reports ME2*, cud not find the report which gives the
condition value means
Eg; PO made on Pencils - Qty 10 NOs. @ Rs. 1/- (incl tax)
condition value for the above is Rs.10, in std sap all reports are showing with net price only
PO no. 45XXXXXXX dt 11.11.2011 - Pencil - qty-10 - Net price Rs.1
Please let us know is there any Standard report which gives the condition value ie., Rs.10 along with or without Net price.

Thank you! It is not meeting my requirement.
I am looking for sap standard report to see the PO value or condition value which is nothing but
Qty X net price. I do not want to touch the tables.
for analysis purpose, i want to have the total PO value in any MM Standard Report.
Today i am visiting every PO and looking at header data for PO value. or at item level Condition value.

Report for deliveries with price zero

Hello,
the client I'm currently working for is using pricing in deliveries and they would like to have a report that they can use to check which deliveries have price 0 to avoid creating the shipments for them.
They are currently finding the deliveries with price 0 when executing VF04 transaction (invoice creation) but at this moment the shipment is already created.
Do you know if SAP has a standard report for that?
Many thanks in advance for your help!!
JordiRC

Thanks Eric,
but building up a new report or making a change in an user_exit is out last option, that's why we are asking for a standard report. If there isn't one we will have no other chance....
Thanks again
JordiRC

Report for PO with prices different from info record

Hi All,
Is there a std report in SAP that can view the PO with prices that varies from the Purch Info Rec price?
User want to find out who put POs with prices different from prices already set in purch info recs.
How this can be achieved?
Thanks in advance!

hi,
There is no std report for the same....but you can see the PO price history from ME1P tcode....and price change in MMR can see from :
CKMPCD Display Price Change Document
CKMPCSEARCH Price Change Documents for Material...
you can't see excatly who changed it ......its always better to avoid these situations by using Authorization for the same...
Hope it helps....
Regards
Priyanka.P

Asset Balances report for reconciliation with G/L account balances

Similar Messages

Maybe you are looking for