Asset master report- supplier details

HI All,
My customer wants to have tax details of the vendor to be recorded and reported for an asset
Though supplier name and number can be directly saved in asset master, is there any way to get the VAT reg number, state tax registration number, Income tax number for each asset.
Could anyone help
THanks so much

hi,
you need an anbap like <b>RAHERK01</b>
A.

Similar Messages

  • Enhancement in Asset Master - Origin Tab

    Dear All,
    There is a requirement to enhance the Asset Master. The details are given below:
    Contact Period: From : To: required in Asset Masster>Origin Tab below the Manufacturer Field.
    Is it possible?
    Any fields or tabs are available to enter the Lease Assets?
    Expecting valuable guidelines from the experts.
    Thanks in Advane.
    Regards,
    GB

    Hi,
    May be in your case the field status might have changed for leasing tab.
    SPOR->IMG->FA->AA->Master Data->Screen Layout->Define screen layout for asset master data->Define screen layout for asset master data.......
    Here choose your each screen layout rule and choose logical field groups and choose LFG 5-Leasing and choose field grouyp rules.
    There make field status as optional for all the fields and then check.
    And go to AOLA and choose layout SAP and choose Tab page titles->7-Leasing->Postition of groups on the tab pages*
    There leasing tab must have been given.
    Please check
    Thanks,
    Srinu

  • Asset balance report Vendor/supplier wise

    Dear All,
    I want to take asset balances report vendor/ supplier wise.
    Is any report avaliable like this?
    Thanks & Regards,
    Pritam

    Hi,
    you can use sort variants which contain the vendor information. You can find some information in SAP notes 98739 and 546856.
    Regards,
    Markus

  • Dynamically select detail report for a master report link item or button?

    I'm still new to APEX, so apologies if this sounds like a stupid question, but so far I can't find anything online about how to do the following.
    I have a simple report, and I want to be able to drill down from here to a detail report via a link item (or a button) in each row. The problem is that the specific detail report to use depends on a combination of values in the parent record.
    So if I have a parent record in the master report with values for columns 1/2/3 of A/B/C, I would drill down to a detail report against table X. If my parent record has values of D/E/F, I might drill down to a different detail report against table Y.
    I can build the individual reports easily enough, and I can set up a link item in the master report to drill down to a hard-coded detail report page. I can even generate the name (alias) of the relevant target report as an extra non-DB item in each row of the parent report. But I can't figure out how to allow each row in the parent report to actually link to a different detail report dynamically, depending on the contents of the parent row.
    Can anybody suggest an easy way to do this, or point me towards an online resource that would explain how to do this (preferably in basic terms that this APEX-newbie can understand)?
    Thanks for your help!

    Hi,
    When you say "Detail report" do you just mean a normal report of the child records for the selected master record or a tabular form style "Details report"?
    Using different reports on a page would, typically, depend on the value in a hidden page item - for example, P1_REPORT_TYPE. Your link could pass an appropriate value into this item and the second page would then use this as a Condition for each of the report regions - each region being conditionally displayed when the hidden item is a specific value.
    Andy

  • How to call a detail report from a master report in 11g?

    How to call a detail report from a amster report in 11g?
    We have a requirement to call a detail report based on the invoice id that will parsed from the master report in OBIEE 11g. Any ideas sugegstions will be greatly appreciated.
    Thanks,
    Edited by: user8957415 on Jul 31, 2012 9:04 AM

    Check these links
    http://gerardnico.com/wiki/dat/obiee/master_detail
    http://prasadmadhasi.com/2011/11/13/master-detail-event-in-obiee-11g-and-pass-multiple-events-to-one-detail-report/
    Hope these helps

  • Asset master change report

    Is there a standard report I can use to monitor specific asset master data fields? My customer updates the second description line in the asset master (ANLA-TXA50) for some business process they have. They would like to be able to have a report that compiles all the master data changes every month.
    Alternatively, I remember that I can also use evaluation groups for user-defined fields but how do I report them?

    Hi Paul,
    Thank you for the information. This is exactly what I needed.
    Regards,
    Roy

  • How can we pass the master report value in to detail  report

    Hi All,
    My question is how can I pass the master report value in to detail (Child) report filter?
    I mean I have one master report if I click on employee name then I have to pass the employee id in to details report filter. Then detail report will display data for that particular employee.
    How can I achieve this one in OBIEE?
    Please help me to resolve this issue. Thanks in advance for your time and support.

    In that case, you should look at using Go Url. In your column formula for the employee name, create a hyperlink to the detail report and pass the employee id.
    Take a look at this post: Re: Dyanmic display of the Image Link URL
    Thanks!

  • Creating a Master with Two Detail report style

    In a Group-Above report data model, how does one add a 2nd detail group appearing at the same hierarchial level as the 1st group?
    The report already exists with MASTER and detailA. I need to add detailB and tie it to MASTER just like detailA.
    |MASTER|
    |detailA||detailB|
    \-------/\-------/

    Amjad,
    Thanks for the reply. My question relates to your suggestion #1: How does one create detailB in the data model?
    The only thing I have been able to do is to create a 2nd query linked to the 1st query. This makes the data model look like it has two masters each with one detail. What I want is a single MASTER with two details.
    Are you suggesting that the only way to accomplish this is by having two queries, one linked to the other, as in the crude rendering shown below?
    |MASTER1||MASTER2|
    |DETAIL1||DETAIL2|
    The above would be displayed in the data model as follows:
    |__Q_1___||__Q_2___|
    |G_DETAIL1||G_DETAIL2|
    \----------------/\----------------/

  • BADI to populate Asset Master Class valu in Account Assignment Item Detail?

    Hi All,
    In Shopping Cart  - COST ASSIGNMENT - Account Assignment Item Details   Tab 
    we have
    Create New Asset Master Record    section  and the field
    Choose an Asset Master Class 
    I need to populate this field (Choose an Asset Master Class) with my own value.
    What BADI I can use to populate value on this field? Any ideas?
    Thanks in advance.

    Hi,
    As i told you there is no badi to do this.
    1-What you can do is to create a CUF in the accounting tab to store your asset category.
    You will then have to
    2- hide the standard field but let the standard populate it with a default value from the org structure
    3- add in the SRM iMG the cuf field for the accounting data.
    4- code bbp_doc_change_badi to populate your CUF field
    5- code bbp_driver_determine in order to call the FM to create the asset
    6- create 1 FM in ECC to create the asset (copy of bapi_fixedasset_create1)
    Hope this helps,
    Kind regards,
    Yann
    Edited by: Yann Bouillut on Apr 15, 2009 5:23 PM

  • Master (Multi Records) Detail Report (Help Required)

    We need Help for Master Detail Report that returns information for all departments and their employees. e.g.
    Page-1
    master Record: Accounts Depts Detail
    Detail Record: Accounts Empoyees Detail
    Page-2
    Master: Department-2 Detail
    Detail: Department-2 Employees Detail
    We are using Apex3.1
    Best Regards
    Jazib

    Hi,
    Changing the Detail part of the page to show all employees in all departments for a city wouldn't be too difficult. The main issue, I think, would be the page structure as, presumably would need to create new departments somewhere and, perhaps, add employees directly into that department?
    For example, if you have a DEPT/EMP master/detail pair of pages, when you click on a department on the report page, the top of the form page would show the department you have selected rather than the city for that department. You could change this to show the city instead, but where would you create new departments?
    Assuming that you can work through that, I should be able to explain how to have a detail form that handles multiple departments.
    Andy

  • Asset Quanity ( Manually updated in Master data) is not Display in Asset Invetory report

    Dear Experts
    I have created as Asset master ( T code AS01) and given the quantity 1 EA and there is no acquisition with any value . But when I try to pull out the asset report with quantity, the above mentioned assets are not updated/displaying in any assets reports .
    My requirement is , the assets report should be updated with quantity which I updated manually. How can I rectify this issue? Please advise
    Thanks & Regards
    Sijo
    FICO Consultant

    Sijo,
    you can display this assets by AR12 since there are no postings yet. Reports like AR01 displays only Asstes with value.
    Regards

  • How to display field Functional Location Field in Asset Master Data

    Dear Experts,
    I really appreciate for your advices on how to display Functional Location Field in Asset Master data.
    I have checked the configuration on path IMG:\Financial Accounting->Asset Accounting->Master Data->Screen Layout->Define Screen Layout for Master Data
    I have chosen the screen layout and review all Logical Field Groups. And there's no field "Functional Location" is available. I also didn't find "Add New" button to add "Functional Location" field.
    Thank you
    Best regards,
    Frans

    Dear Frans,
    I am sorry this is not possible.
    Note 140482:
    The field was created as a precaution. However, it is not being used at 
    present and consequently is not supplied.                               
    In particular, you cannot use the field as a criterion for a selection  
    in Asset Accounting reporting. This is still true even if this field has
    been included in the selection view delivered for the dynamic selections
    by modification.                                                        
    regards Bernhard

  • Error while creating asset master on a new company code

    Hi there,
    While trying to create a new asset master - Asset class XXX cannot be used in company code XXXX
        Message no. AA130
    Diagnosis
        When you create an asset, the system determines the chart of
        depreciation from the company code definition. In order for a chart of
        depreciation to be available for an asset class during asset
        maintenance, the chart of depreciation has to be entered for that asset
        class (Determine class valuation). Chart of depreciation YYYY that was
        determined is not entered for asset class 123
    System Response
        You cannot create any assets in your company code for this class.
    Please revert if you have any details regarding this. I am sure I am getting this error because of a missing entry in v_ankbv. But i am not sure on what is the config step i m missing.
    Thanks,

    You need to configure the node 'Determine Depreciation Areas in the Asset Class'  T Code-OAYZ.
    Path : Financial Accounting (New) > Asset Accounting > Valuation > Determine Depreciation Areas in the Asset Class.
    Assuming you have already done the other prior config steps involved like., Assign Chart of Depreciation to Company Code, Asset Classes etc.,
    You can also refer to the Best Practices Configuration guide (Link Below) for further details:
    http://help.sap.com/bp_bblibrary/600/html/N72_EN_DE.htm
    Regards
    Sreenivas
    Pls close the post if satisfied.

  • How to import Fixed Asset Master File

    Hi all expert,
    I used BAMasterDataImportFile to import the Fixed Asset. But the message as below appear :
    "Import end;Number of successfully imported assets: 0;Number of processed assets:2"
    After complete import the fixed asset master files still empty. May i know anybody can advise me for import fixed asset files?
    Thank for help.
    From:
    Eric Tan

    Hi Eric,
    Please refer your error with the possible reasons below (from SAP notes):
    Error message: "Import End; Number of imported assets:0; Number of processed asset:2"
    Reason: Note that there is no error. It is usually because of the conflict of Depr. Start Date , Use Life and Remaining Life.
    The following is a list of possible errors:
    1. Fixed Asset in Production Mode -- Make sure Fixed Asset is in Transfer mode before importing.
    2. The number of semicolons for each line is not 66 -- For each line, each field must be separated by a semicolon(, the number of separators( should be 66.  Number( = 66.
    3. Wrong Date Format DD-MM-YYYY or MM-DD-YYYY -- The correct date formats should be : YYYYMMDD, YYYY-MM-DD, YYYY.MM.DD or YYYY/MM/DD
    4. Asset Class unavailable -- The asset class in your csv file does not exist in Fixed Assets; make sure the used asset classes are defined in Fixed Assets before importing.
    5. Depr. Type unavailable -- The given depreciation type does not exist in Fixed Assets, make sure the used depreciation type is defined in Fixed Assets before importing.
    6. Depr. Area unavailable -- You entered data for a depreciation area that does not exist. If there are only 2 depreciation areas in Fixed Assets do not enter data for area 3 or 4.
    7. Depr. Area is inactive for asset class  -- You entered data in the csv file for an area that is not active for the given class in Fixed Assets.
    8. Life parameter is negative or the remaining life is greater than planned life -- All life parameters should be positive, the remaining life should be less than the planned life
    Life Parameters(Depr. Start Date, Useful Life and Remaining Life) are mathematically incorrect for one of the areas in csv. Remaining life = Useful life - (the difference between the first date of import year and depreciation start date). Note that it is not the difference between import date(the date you import Fixed Asset Master Data) and depreciation start date. You must calculate the remaining life correctly. For example, you want to import an asset in 2005, you import it on 2005-09-01 ,then the first date of the import year is 2005-01-01, Depr. Start Date = 2003-06-01, Useful Life = 60 months, then
          Remaining Life = 60 - (2005-01-01 - 2003-06-01) = 60 - 19 = 41 months.
          The following calculation is wrong:
          Remaining Life = 60 - (2005-09-01 - 2003-06-01) = 60 - 27 = 33 months
    Import Fixed Asset for the current fiscal year -- The fixed asset master data import function is designed for legacy data importing. We recommend you to import fixed asset master in the past years. If you insist on importing an asset for the current fiscal year, make sure the depreciation start date is the first date of current fiscal year and the Remaining Life is the same as the Useful Life.
    Year Values -- the sum of the accumulated depreciation (planned, unplanned and special depreciation) in the csv file is greater than the acquistion and production costs.
    Also, don't forget to change the fixed asset mode to transfer. Administration>System initialization>Company Details> Basic initialization tab.
    Hope this helps.
    Rogelio Elicor Jr.

  • Getting Segment in the Asset Master ( Using SEGMENT Badi and not Prt Ctrs)

    Hi,
    We need the field Segment to be populated in the Asset Master to get the correct P&L Statements ( The depreciation run, retirements etc to post to the Segments) . We are using the segment Badi: FAGL_DERIVE_SEGMENT to derive Segments and NOT the  Profit Centers
    However, the field Segment missing in Asset Master (Class). The field segment is missing the Time Dependent view while creating the Asset Master Data. This is so because in the Configuration of Asset Accounting --> Integration with GL --> Additional Account
    Assignment Objects is not showing the Segment field.
    According to SAP help, I CAN DO THIS as mentioned
    http://help.sap.com/erp2005_ehp_05/helpdata/en/94/f13167dbae436a85a4a1d3ad75f274/frameset.htm
    But, as mentioned in the SAP help link above, I am not able to find " Activate segment reporting in
    Customizing for Asset Accounting under Integration with General
    Ledger --> Accounting Segment Reporting --> Activate Segment Reporting"
    Also, from another SAP Help link
    http://help.sap.com/saphelp_crm700_ehp01/helpdata/en/fb/84a48d665e4fa9a2dc7b60adeb7c7d/frameset.htm
    I found that activation of Business Function FIN_GL_REORG_1
    or FIN_REP_SIMPL_3 could also get us the Segment Field in the Asset
    Master Data's Time Dependent Field
    However, when I goto Transaction SFW5 - Change Business Function Statuswe are not able to find these Business Functions (FIN_GL_REORG_1
    or FIN_REP_SIMPL_3 )
    Regards
    KS

    Hi, Activate segment reporting is available only in EHP5.
    If you'renot using EHP5, then you can't to update segment as well as profit center in asset master data.
    The only way is to put co objects in asset master data, and derive PC,segment based on this co objects

Maybe you are looking for