Asset transfer - ABUM

Hello Gurus,
We are transferring an asset from a cap asset class to low value asset and while doing so the system throws errror that "Transfer not possible (Different depreciation types)" only in the case where my depr. key in Special Dep. Area 10 has special depr. calculation in it otherwise for other depr.keys containing only Ordinary Depr. it is not showing error and getting transfered.
Is there any way out to do the trnasfer of such asset to LVA asset class without change in dep. key of the acquiring asset?
Actually we are stuck at this point.
Thanks in advance for the help.

Hi,
In T-code: OABS  I am trying to activate Indicator: Managing special depreciation
Set this indicator, if you want to allow special depreciation in this depreciation area.
For Depreciation area 15 Depreciation as per Income Tax  Act 1961
I have two depreciation areas 01 and 15.
For Dep area 15 the field is inactive.  So I am not able to active that field.
But when I active the above filed for 01 dep area, then system automatically activating the 15 dep area field also.
Please let me know what I do????
Thanks
Partha

Similar Messages

  • Error AU133 received while posting asset transfer

    Hi Friends,
    While posting asset transfer to affiliated co. (t.code ABT1N) got error message "Account 'Clear.revenue sale to affil.company' could not be found for area 01".
    We have already maintained GL A/c in Ao90 in tab 'Clear.revenue sale to affil.company' .The asset is a AUC asset.
    The GL is also existing in the co  code from which the transfer is made.
    Kindly help to solve the issue..
    Thanks & Regards
    Bhairavi

    Hi Bhairavi,
    1) the note is relevant for your release to check the transfer variants
    2) In fact, when the field in OABE is selected the system uses another posting schema than the standard one (used when the OABE is not set).
    3) Do you one or more depr areas which are derivied from area 01 ans use different accounts? For example:
    AFAPL  AFABER XSTORE ABVOR1 AFABE1 ABVOR2 AFABE2 VZANSW VZREST BUHBKT  
    ABCD   03            +      01     -      02     *      *      4       
    ABCD   05            +      01     -      04     *      *      4       
    Regars Bernhard

  • Issue In Asset Transfer

    Hi
    I have an issue in Asset. I have created an asset in a wrong asset class by mistake. Now I want to transfer the asset value to an asset created in the right asset class. But when I am doing this, the system is transferring the proptionate depreciation calculated to the new asset. Pls suggest
    KM

    Hi
    It seems that the depreciation key has been configured to calculate the depreciation from the depreciation start key mainatained in the depreciation area. Hence, when you do the asset transfer, the system would post a pro rata depreciation from the depreciation start date to the date of transfer and transfer the same to the new asset. Howver, you can avoid that by changing the depreciation start date to the date of transfer. In such a case, no pro rata depreciation would not be calculated and transferred to the new asset.
    Assign points if the information is useful to you
    Regards
    Sanil Bhandari

  • ABT1N-Getting Error while doing Intercompany asset transfer

    Hi,
    Due to a merger of two comapny codes, my clients needed to make an intercompany asset transfer (transaction code ABT1N), with company code 099 as the sending company code and 200 as the receiving company code). However they got the following error message:
    AU133
    Contra account is not assigned.
    Is it necessary to assign conta accounts In AO90 for intercompany asset transfer?
    Could anyone suggest me what are the necessary settings required for intercompany asset transfer?

    yes maintain contra account  in ao90
    Edited by: Anil Kumar Potnuru on Feb 10, 2009 4:50 PM

  • Getting error while doing Intercompany asset transfer

    This is the first time that they are doing an intercompany asset transfer in our client. Intracompany asset transfers were done in the past. While doing an intercompany transfer, an error is popping up as given below.:
    Account 'Contra account: Acquisition value' could not be found for area 01
    Message no: Au133
    Diagnosis
    When creating the accounting document the system could not find account 'Contra account: Acquisition value' in depreciation area 01 for Company code( sending company code)
    Procedure:
    Enteer this account in the account determination for Asset Accounting.
    Since, this is the first time an intercompany transfer is happening I assume that there is some configuration or some settign that might have to be done. Please could you help me.

    Hi,
    first set your COD with OAPL.
    Go to transaction AO90 and select your COA and click on account determination, and select the account determination key, which is used for your sending asset and doublie click on blanace sheet accounts.
    There one field will be there called Contra account: Acquisition value, so enter a B/S GL account there and SAVE it.
    Since this account is required to enter at both COD level, like sending assets COD and receiving assets COD. But if you have your both assets in same COD, no need to maintain twice.
    The purpose of this GL account is used while transfering one asset from one company code to another to capture the NBV as clearing entry between inter company code trasnfers. (This is as good as OBYA settings in FI). But this GL account here is not specific for one particular company code as like in FI.
    This will solve your problem.
    Cheers,
    Srinu

  • Asset Transfer posting ABT1N

    hI,
    while working with transaction ABT1N Asset transfer posting from existing (comp code) asset to new (comp code) asset with
    Document, posting, asset value date -> this will be the same date 1.1.2011,
    system gives error message" You cannot post to asset in company code 'abcd' fiscal year 2011.
    After that
    I changed the Document, posting, asset value date -> this will be the same date 20.11.2011, system gives error message "
    Account 20900000 does not exist in company code 'abcd'.
    Please resolve the issue both the scenarios.
    Thanks,
    Sahara.

    please search.  the "account does not exist" error has been dealt with previously.

  • ABT1N  Intercompany Asset Transfer  error: AA390   T type 230 not possible

    Dear experts,
    I am trying to post an intercompany asset transfer with trx code ABT1N but when simulating the error code
    Transaction type 230 not possible (posting to affiliated company) appears. This is the explanation of the error:
    Message no. AA390
    Diagnosis
         For the current document, you specified either implicitly (via the
         customer/vendor), or explicitly (with a manual entry), that this posting
         is to an affiliated company. In this case, Asset Accounting requires you
         to use special transaction types.  This enables the system to separately
         identify such transactions.
    I do not understand the error because TType is "Retirement to affiliated company with revenue" so should be correct.
    Does anybody know what could be wrong?
    Cheers

    Hi
    Firstly, check out Note 209643.                                                                               
    Secondly, please read the long text of the error message again. The           
    transaction type must be set as "post to affiliated company".  And            
    you must check back the followings :-                                                                               
    1.  Please execcute function:  SAP IMG -> FI -> asset accounting ->           
        transaction -> specify default transaction type.                          
        You can find the default transaction type for "retirement from            
        inter-company transfer" and "acquisition from inter-company               
        transfer".                                                                               
    Then check in their definition whether they are relevant to               
        affiliated company.                                                                               
    If they are NOT RELEVANT to affiliated company, you can                   
        substitute them with other transaction type Relevant to affiliated        
        company.                                                                               
    2.  Please check the definition of transfer variant. In the transfer          
        variant, you have assigned the transaction type for both retirement       
        and acqusition for relation type 1. Both transaction types should be      
        set as "post to affiliated company" .    
    Please note that the abovementioned points must be checked because        
    the system logic will check the validity of the default value in          
    Point 1.                                                                               
    Then the transaction type in the point 2 will be used instead and         
    re-checked again.                                                                               
    Have you try to use 'No Reveune' in the specification for revenue?,       
    I think if it is afflicated companies, you are not allowed to use         
    revenue.                                                                               
    This error can also be produced because a wrong definition of the trans-  
    fer variants. Please have a look on note 327088 for further details.                                                                               
    Most of the issues on this matter were solved with this last Note.        
    Cheers, Blaz

  • Asset Transfer

    Hi All,
    We are Using T code ABUMN to transferring of existing asset and creating as new asset within company code to change of Cost center, but the existing asset has no value. The system issue below error message when posting,
    Retirement/transfer on asset XXXXX 0 takes place with no values
    Message no. AA396
    I couldn’t find any solution for existing no value asset transfer. Please suggest the ways to solve.
    Note: As best practice, we have grayed out cost center once asset master is created. So we cannot change directly in master.

    HI Abu,
    Since we want to transfer the asset from one business area to other business area, we have to remove the asset from business area where transfer happen and we have to show that asset in the history of receiver business area. So we cant transfer the asset with same number within the business area.
    There is one tab called Time-dependent data in master data there you can set the time intervals for Asset.It's mainly designed for your requirement like.
    When asset moved from one place to another place or another location you can set the time interval for that..
    For example:
    A asset belongs to ABC businessarea from 01/01/2008 to 30/06/2008
    When asset moved to DEF business area you have to set interval for 01/07/2008 to 31/12/9999
    Then that asset will be read undet DEF business area.
    Hope it'll clear your requirement.
    Thanks,
    Puja

  • Asset Transfer Message

    Hi Guys,
    While i am doing asset transfer transaction code ABT1N i get this error that  No Deprecaition area is receiving revenue, i don't know what that mean. can you help me in that urgently.
    Thanks,

    Hi,
    yes i have selected the radio button for revenue for NBV or manual revenue. the error is that transaction type 320 in which "retirmen with revenue" indicator was not set.
    Thanks,

  • Asset Transfer-Intercompany

    Hi
    I am doing intercompany asset transfer (ABT1N), while doing simulation i getting bellow errorMessage No AA548- Error when crating line items using line item schema SAP_100_003.
    furteher it says as bellow
      A Value field was updated on the asset, and this value field is updated to a reconceliation account in FI, But there is no line item defined for this value field in line item schema.
    Any one can help me to solve this problem.
    Regards
    Srinivas

    Have a look to SAP note 167826
    https://websmp230.sap-ag.de/sap(bD1ubCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=167826

  • Error in Asset Transfer

    Hi Sappers:
    I am facing the following issue in intercompany asset transfer:
    Asset numbers: 910000001608 and 910000001609 need to be transferred. The transfer will be moving the assets from company code 9001/cost center 1100105202 to company code 2001/cost center 1010105244. 
    While transferring the assets the following error appears:  Account "Acquis. and production costs" could not be found
    I checked up account assignments in T Code AO90 and the account for Acquisition and production costs has been defined.
    What could be the issue here?
    Thanks,
    Appreciate your time!
    VR

    I just figured out that the Account 'Acquisition:Acquis. and production costs' which is defined in AO90 is defined as GL account (131511000) in the company code 9001 but not in company code 2001.
    I believe creating the GL account 131511000 in 2001 should resolve the issue.
    Any comments?
    Appreciate your time!

  • Error during asset transfer: No depr areas for receiving revenue

    Hi....
    when I am posting an asset transfer transaction [Inter company transfer with transfer method 2: Net method] and simulating, I am getting an error message stating "No Depr areas for receiving the revenue". Kindly help me solve this error.
    Thanks
    Satya

    Hi....
    I am posting the transfer from with revenue details as NBV from depr area 01,  and using the transfer variant as 2 [Net Method]. Still it gives the same error.
    I then try posting a manual revenue and again it shows the same error.
    Finally, I use No revenue option, and it accepts. do not why this is happening?
    Kindly help.
    Thanks

  • Asset transfer error

    we use abt1n to transfer asset, old asset apc value is 24425.64 USD, ordinary depreciation is 6106.4, change column is 814.19-,
    net book value is 18319.24,(fiscal year start), 17505.05(posted value).
    abt1n we choose gross meth. and we use NBV from area to transfer
    new asset in another comp code capitalization date 2011.5.31, apc value is 2425.64, same, but nbv is 16690.86, with value adjustment 7734.78-, why nbv is not 17505.05? where did 7734 value adjustment come from?
    in net method, we hit error:, how to resolve?
    Posting with trans.type 157 not possible (No acquisition posted)
    Message no. AA324
    Diagnosis
    Transaction type 157 belongs to a transaction type group, which can only be used to post to assets to which posting has already been performed. However, no postings have been made to this asset.
    Procedure
    Use a transaction type from a transaction type group, which can be used for the first acquisition to an asset.

    hi,
    note is helpful, but I'am asking why NBV is not transfered to new asset?
    secondary, how to reverse abt1 result, besides reverse accounting doc fb08, any other solution?
    also previous peopleI define a transfer variant Z1 with retriement transaction type Z01, but I can't find it in Ao67or AO68, which tcode or spro path can I configure Z01?
    in order to use inter-company asset transfer, besides transfer variant, what else needs to be configured?

  • Issue in Depreciation Adjustment while Asset Transfer

    Hi,
    We have some old legacy assets which is capitalized in 2010 and depreciating for the last 4 years, These old  assets contain the value of several different assets and the usefull life of the old asset is 50 years, Now we need to segregate these old asset to different new assets , my process contains
    1) Creating new assets with different asset class with different usefull life
    2) Transfer the respective value from the main asset to the new assets
    3) Adjustment of depreciation already posted.
    Here i am facing some issues regarding the asset transfer , anybody suggest which is the best way to transfer the asset acquisition value to new assets ?
    when i am using ABUMN to transfer the values , system posting depreciation value adjustment which is the alredy posted depreciation for the past 4 years with the usefull life as 50 years. Is there any methode to adjust these value ?
    If i am posting Asset transfer with F-02 (with negative posting) , system will transfer the net book value and start the depreiation calculation based on the usefull life of the new asset. Here system is not considering the depreciation already posted.
    Is it possible to make changes in the system where assets will consider the depreciation start date as 2010 (old asset depreciation start date), If i am manually changing the depreciation start date then system is calculating the depreciation start date as 1st period of the current year (because previous years are alredy closed),
    instead of 5 years usefull life ,system depreciated the values with 50 years, i need to adjust the posted depreciation and when i create a new asset with usefull life of 5 years i need to manage the asset as already 4 years usefull life is expired.
    Is there any solution  ?
    Regards
    San

    Hi Ajay,
    Case : We have an asset 1000, which contains a value of $ 100000, it was capitalizes in 2010 with usefull life of 50 years and past 4 years depreciating with 50 years usefull life, This is a legacy asset and contains the value of so mny different assets.
    Now we need to create different assetd with different asset class and contains different usefull life, We need to transfer the value from Asset 1000 to these new created assets, here my concern is about the depreciation already posted to the asset 1000,
    Assume my new assets value is $ 20000, i can transfer the value from asset 1000 to my new created asset. but here depreciation should be a problem because last 4 years depreciation is calculated as 20000 @ 50 years , but actual usefull life was 5 years.
    Is there any methode to adjust the already posted depreciation.
    Regards
    San

  • 1KEI asset transfer to PCA

    I am trying to understand how asset transfer works to PCA.  For vendor and customer line items, I understand open items are transferred to PCA using 1KEK.  For assets, there are no open items. So, I am thinking month end asset balances are transferred to PCA. For example, an asset  was capitalized during the month for $100 and then scrapped before month end for $100. So, the asset balance is zero.  Will this asset transfer at month end to PCA?
    Like AR and AP line items, is there a table where profit center for asset line items is stored?  For AR and AP,  it is stored in BFOD_A and BFOK_A tables.
    Is there a way to eliminate this periodic transfer of AP, AR and assets in PCA and instead have on-line real time transfer?
    Any insights will be appreciated.
    Thanks in advance
    Sanjiv

    Hello Sanjiv,
    the periodic transfer of assets reads the current data from the asset tables for stock and depreciation. There  are several tables to be read and PCA makes use of the logical database from FI-AA.
    You can eliminate the periodical transfer by entering all asset accounts in trx. 3KEH/3KEI. Then the asset postings will be updated in realtime in classic PCA.
    The online transfer of AR and AP is possible by entering the accounts into 3KEH/3KEI but all postings will flow to this default profit center and not to the origin profit center which is set by F.5D. Therefore we do recommend the periodical transfer and execution of F.5D/1KEK for open items and classic PCA.
    Best regards,
    Daniela

Maybe you are looking for