Error during asset transfer: No depr areas for receiving revenue

Hi....
when I am posting an asset transfer transaction [Inter company transfer with transfer method 2: Net method] and simulating, I am getting an error message stating "No Depr areas for receiving the revenue". Kindly help me solve this error.
Thanks
Satya

Hi....
I am posting the transfer from with revenue details as NBV from depr area 01, and using the transfer variant as 2 [Net Method]. Still it gives the same error.
I then try posting a manual revenue and again it shows the same error.
Finally, I use No revenue option, and it accepts. do not why this is happening?
Kindly help.
Thanks

Similar Messages

Different Depr Areas for different Company Code

Hi Gurus,
We have the followings:
i We have 1 Chart of Depr
ii Company Codes A & B (common ChoA)
iii Depreciation Areas: 1, 2 and 3
Each Depr Area has its own accounts in AO90.
I check the "Depr Area block" indicator, say for area 3, when I do AS01 for company A.
During activation through investment order (KO88, full settlement) I got a message:
Error during acquisition transfer: Depr. area does not exist
Diagnosis
According to the specifications for transfer variant 5, depreciation area 3 should be transferred gross. However, the recieving asset GHY 110033-0 does not manage this depreciation area.
Procedure
Check the transfer variant and the receiving asset.
The scenario would be that each company code would activate respective depr areas (of course beside the leading area, which is common for everybody), and later on each would see only the needed figures.
I looked up the transfer variant settings but Iu2019m not sure about the settings.
Is it possible anyway? Or I need to set up different Chart of Depr for each Co. Code?
Thanks in advance
M

Normal you create 1 chart of depreciation by country with the same rules for all companies in that country

Printing dunning notices using SMARTFORMS,error during parameter transfer

Hi Friends,
                I face a error message "Include text ZGA_DUN_HDR does not exist (object TEXT, ID ST)" when i run the dunning run.
                I had searched every node for text ZGA_DUN_HDR in the smartform,I didnt find the text in it.
However when I execute the smart form for print preview an error message "Printing dunning notices using SMARTFORMS,error during parameter transfer".This error i believe is due to wrong parameter passing in the fm 'GET_SF_DUNN_DATA'.It raises an error no_parameters_found.All parameters are passed correctly.
                Can you guys help me out.
Edited by: RAJIV KAUSHAL on Nov 14, 2008 6:03 PM

you can create this text ZGA_DUN_HDR in SO10 tcode and try ...

Error during Asset Scrapping using ABAVN - plz advise

Dear all,
Facing an error during asset scrapping using ABAVN for a Korean company code.
Net value of asset is not zero. Transaction type = Disposal/abandonment of prev. year acquisition.
Error occurs on Simulation - Transaction in area 40 contradicts the net book value rule
NBV in area 01 Book Dep - 108,612,225 KRW
NBV in area 40 u2013 Tax Dep u2013 108,612,192 KRW
Negative vals allowed NOT checked in asset master.
SAP says:
The document cannot be posted, as it is contrary to the net book value rule which is checked in area 40.
This error usually occurs when you enter proportional values. The proportional values exceed the amount posted, for example, post capitalization of 100 but proportional depreciation to the amount 110. Check your entries and correct them if necessary.
How do we correct this issue and scrap the asset? Is this specific to Korea? How can we make NBV in area 01 = area 40?
Any clues? Greatful for all answers
Cheers
RK

Kindly read the forum rules and then post.
SMS Language is strictly not allowed.

Error during determination of the pegging area 505 4766 SGV3

Hi,
I got this message 'Error during determination of the pegging area 505 4766 SGV3' in CIF queue while transferring the sales order from R/3 to APO.
Could you please suggest me some idea, how do I debug and find where exactly this error is happening?
Or Is there any functional setting to come out this error?
Thanks and Regards
Rayudu

Try to use /SAPAPO/OM_TB_PEGAREA_CREATE or /SAPAPO/OM_PEGAREA_CREATE_TEST programs to check your peg area consistency in live cache.
/SAPAPO/OM_DEFECT_PEGAREAS can also try to help you find peg areas that may be defective.
Try to see the SLG1 log for CIF in R/3 and APO to get more clues on why the issue is coming up.
if all this does not help, I would recommend trying to work with subsets of data in integration model to exactly identify the location products that are causing the issue. Once you identify the location products causing this problem(using /SAPAPO/SDORDER_DEL), I would suggest you to get rid of sales orders in APO and re-CIF it back into APO.

Error during data transfer from Lotus Notes to SAP via JCO - Urgent Help Required

Dear SAP Expert:
I need your help! Recently getting error during data transfer to SAP. I need your suggestion!
I am transferring Lotus Notes data to SAP via JCO, recently getting the below error msg, could you pls tell me what could be the reason?
Please suggest me how to fix that kind of issue.
"com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Error in ABAP/4 statement when processing an internal table. table.
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeExecute(Native Method)
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.execute(MiddlewareRFC.java:1244)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3842)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3287)
at SAPAdapter.execute(Unknown Source)
at JavaAgent.fillBapiAndWriteBackToNotes(Unknown Source)
at JavaAgent.NotesMain(Unknown Source)
at lotus.domino.AgentBase.runNotes(Unknown Source)
at lotus.domino.NotesThread.run(NotesThread.java:249)
Thanks in advance! Your help would be highly appreciated! Thanks again!

error is clear, check your abap code.

Error during printing: Ensure all parameters are defined

Forum,
I have the following issue on 8.81 PL08. When trying trying to print from the Outgoing Payment screen we get the following message: Error during printing: Ensure all parameters are defined.
What parameters specifically would it be referring to?
Regards,
Juan

Hi,
IS the error occurred only in outgoing payment? or what changes have you done?
Try to create new PLD copy from system PLD then edit the field.
Everytime you inserted a fields try to run the PLD so that we can determine the problem.
Thanks.
Clint

Error during requisition transfer for PDP

All,
when we try to transfer requisition from Back end ECC 50 to SRM 50, the transfer stops in the outboud queue of ECC with an error message 'ANORETRY'. In SRM, in the application log SLG1 I see an error message 'No partner number found for Partner <plant>". Have any one of you faced this problem. Any help would be appreciated
thanks,
Siva

Hi,
We too where getting the same error when we try to transfer requisition from Back end R/3 4.7 to SRM 5, the transfer stops in the outboud queue of R/3 with an error message 'ANORETRY'. In SRM, in the application log SLG1 I see an error message <b>'No partner number found for Partner <plant>".</b>We applied the note 801133 but after applying the note we still get in the outboud queue of R/3 with an error message 'ANORETRY'. In SRM, in the application log SLG1 I see an error message <b>" Transaction Type for Local system missing"</b>
Note-We have maintained Transaction Type as SHC in the attribute.801133 HAS HELPED IN RESOLVING ONE ERROR BUT IT HAS CREATED ANOTHER ERROR
Did u come across same error after applying 801133.How did u resolve it.

Error in Asset Transfer

Hi Sappers:
I am facing the following issue in intercompany asset transfer:
Asset numbers: 910000001608 and 910000001609 need to be transferred. The transfer will be moving the assets from company code 9001/cost center 1100105202 to company code 2001/cost center 1010105244.
While transferring the assets the following error appears: Account "Acquis. and production costs" could not be found
I checked up account assignments in T Code AO90 and the account for Acquisition and production costs has been defined.
What could be the issue here?
Thanks,
Appreciate your time!
VR

I just figured out that the Account 'Acquisition:Acquis. and production costs' which is defined in AO90 is defined as GL account (131511000) in the company code 9001 but not in company code 2001.
I believe creating the GL account 131511000 in 2001 should resolve the issue.
Any comments?
Appreciate your time!

Error during goods receipt of Finished goods for production order

hi friends
pls help me iam struggle this issue and mentioned the issue .
when i do goods receipt for production order system getting error like
No price could be determined for material/batch FG/ plant ZTP
     Message no. CK 465
Diagnosis
     The system could not calculate a price for material/batch FG/ in plant
     ZTP for valuation view 0, because none of the valuation strategies in
     valuation variant 007 was successful.
System Response
     User-defined error management enables you to specify whether the message
     is an error message, a warning message or an information message.
     o   If you have defined the message as a warning message or an
         information message, the costing item will be entered in the cost
         estimate with a value of zero.
If you have defined the message as an error message, the cost
estimate contains an error or errors.
-   In the case of a material cost estimate, the system sets the
    status KF.
-   If it is a cost estimate without quantity structure, or base
    object cost estimate (that is, a unit cost estimate), the
    system cannot proceed with costing until you have corrected the
    errors.
If the system issues a termination message, the cost estimate cannot
be processed, and processing is terminated.
procedure
    o   Check the master data for material/batch FG/ in plant ZTP.
    o   If you have authorization for Customizing, check the valuation
        strategy for materials in valuation variant 007.
    Note
    If the message is a warning message or an information message, there is
    a danger that materials with errors will be ignored by the system.
    If, because of this, you issue a warning message and at the same time
    include materials with a zero value in cost estimates, you can make the
    following settings for these materials in the costing view of the
    material master:
1. Enter a very low price in the planned price 1, 2 or 3 fields
      manually, for instance 0.01 USD. These prices are used for costing
      purposes only; they are not read by other applications.
2. Enter the highest price unit possible, for example 10000.
      Note: If you enter a new price unit that is higher than the costing
      lot size, the system increases the costing lot size accordingly.
3. Change the valuation strategy, such as strategy 4, where you could
      enter the planned price field in which you entered the low price.
      The system now costs as follows:
      Using the valuation strategy, the system finds planned price 1, 2 or
      3. Due to the low price and high price unit, the system rounds the
      value to zero. However, the cost estimate still obtains status KA
      (free of errors), and no error message is issued.
      This procedure can be used for all materials that have caused error
      message CK465 to be issued.
with regards
dinesh
Edited by: code acess on Nov 8, 2010 4:06 AM

hi ragavendra,
this is dinesh .i maintained the costing view and planned price. but again i have same error.so please reply me where i missed the data
with regards
dinesh
Edited by: code acess on Nov 9, 2010 4:01 AM

Error during acquisition transfer: Depr. area does not exist

Hi,
I am getting following error while posting WBS through CJ88
Message no. AAPO107
Diagnosis
According to the specifications for transfer variant 5, depreciation area 30 should be transferred gross. However, the recieving asset 3300053-1 does not manage this depreciation area.
Procedure
Check the transfer variant and the receiving asset.
Can you please help
Thanks

This is probably a question best for the asset section but check the Depreciation areas tab on the asset AS03 and see if it has depreciation area 30.

Error During the Transfer of Asset

Dear Experts,
I am trying to retire an Asset through ABAVN, But its giving an error Message Viz..
Partial retirement or transfer of prior-yr acquis. not possible
Message no. AA378
Diagnosis
You tried to post a retirement or transfer, based on quantity or
     percentage, to asset acquisitions from prior years on asset 180000041 0.
     However, the system could not find any values.
I have checked the asset 18000041. Its a group asset and it has a Dep. Key attached with it. but the Depriciation has not happened so as a result there are no values of this particular Asset in Aw01n.
Kindly help....
Regards
Om Prakash Gupta

Hi All,
I have already resolved the issue.
If any one you face this kind of problem, go to ABZON, give the asset nos to retire. give the vaue as .01 to be posted a releveant transaction type and then save it.
After that try to retire the asset. it will let you to do.
Regards
Om

"Action does not exist error" during country transfer action

Hello, everyone.
We are on ECC5.0 with MGE. Recently our users are getting an error - "Action does not exist on mm/dd/yyyy" when they perform a country transfer action (transfer from country A to country B). Because this is a hard error, the action is stopped and our users have to re-execute it. Surprisingly, the action works fine for the second time.
The error comes from message class PG no. 022 in the Include program MP000040.
We raised this issue to SAP but all they told us to look into our user exits. We were told to remove our exits entirely to see the error happens. The problem is that this error does not happen each time.
Has anyone experienced this error? If so, does anyone know why this is happening and how to resolve it?
We tried to debug the code step by step and came across CPREL is filled with "02" in OBJPS for infotype 0000 in the program FP50MF10. We have no idea as to how the OBJPS is filled with a value. Infotype 0000 is not supposed to have this field populated. We think this is the root cause of the error. But why does it happen?
Any help will be greatly appreciated.
Regards,
Noriko

Hi.
We use both PBAS0001 and HRBAS00_CCHANGE.
Noriko

Deployment '2700002' to target 'tar152' encountered a system level deployment error during data transfer.

Hi All,
I got this error in atg bcc on UI and console as well when i doing full deployment.
I triyed through snap-shot id but i think this is different issue.
So please tell me where is problem happend.
Thanks in Advance.
--Kakasaheb.

Are you working with a customer with a support contract?
Cause
One potential cause is corrupted data in the epub_file_folder table in the versioned schema and examining the table contents is necessary. This data may be the result of a deployment containing VFS assets that did not complete successfully
The BCC application assumes that the virtual folder structure contained in epub_file_folder is built upon a single root folder. This folder has the name 'root' and has a NULL parent_folder. If another folder in this table has a NULL parent_folder, then the application does not know which is the true root folder. As a result, based purely on chance, the BCC will choose one of them as the root folder of the VersionFileStore (VFS). Depending on which assets are contained beneath that folder, some file assets may not appear correctly in the BCC UI. Another symptom is the inability to deploy any project, including a full deployment.
To check for this particular corruption, perform the following SQL query.
select * from epub_file_folder order by parent_folder;
Putting the table data in a spreadsheet makes it easier to sort the data on various columns for analysis.
If you sort by parent_folder check for data similar to that shown in the following table. Note that there are two folders whose parent_folder is NULL. Here are the relevant columns from epub_file_folder:
folder_id
folder_name
parent_folder
asset_version
is_head
version_deleted
version_editable
ff102063
CorruptFolder
NULL
1
1
0
0
root
root
NULL
1
1
0
0
Solution
Note: Exercise caution when directly modifying the versioned database schema. For assistance identifying this problem and implementing the solution, please open an SR with Oracle Support.
1. Analyze Versioned Folder Data
How you resolve this corruption will depend on whether or not you need to retain the corrupt folder. Examine whether the folder has an asset version that is checked in, marked as deleted, or marked as the head version. If there is no checked-in version with is_head=true, then this indicates the folder may have been part of a failed deployment.
Trace through the hierarchy of folders underneath the corrupt folder. Determine whether there are any folders or files within that hierarchy that you need to retain. In some cases, it may be a single folder created unintentionally by a BCC user. In other cases, there may be more significant folder structure underneath it that is needed by the front-end application.
2a. Corrupt Folder Not Needed
If you do not need the corrupt folder, set its version_deleted=1.
This will mark the folder as Deleted in the versioned repository. As far as the BCC is concerned, neither it nor anything under it will exist and will not appear in the BCC UI. The data will still be retained in the database, though.
2b. Corrupt Folder Needs Correct Parent
If you do need the corrupt folder, determine the true parent folder. Set its parent_folder to the ID of the actual parent.
See the folder_id column for the correct parent folder and substitute that ID for NULL in BadFolder's parent_folder.
3. Restart BCC and Re-Test
After modifying the data for the corrupt folder, restart the BCC so that the repository picks up all the changes.
++++
Thanks
Gareth
Please mark any update as "Correct Answer" or "Helpful Answer" if that update helps/answers your question, so that others can identify the Correct/helpful update between many updates.

Asset transfer one business area to another(Required Source B. Area)

Dear All,
As mentioned in below link i done all the settings process it is working fine http://scn.sap.com/thread/1748457.
here thing is i am unable to find Source B.Area in asset master report how can i get the source B. Area in asset history sheet.
Ex: I have transfer One asset from B.Area: 0001 to 0002 Transfer entry generating automatically. up to now it's good here problem is when i run AR02 asset history report system is showing business area 0002 only(Current B.Area), it is not showing B.area: 0001(From which business are asset was transfer the asset .
How can i get the Both business area From B. Area(Source B.Area) and To B. Area(Target B. Area) in the asset history report kindly help to get the Source business area.
Thanks & Regards,
Sreehari Tokala

Hi Jaya,
we need to maintain the screen layout rules for the asset master data for the above issue.
Path: SPRO, Financial Accounting, Asset Accounting, Master Data, Screen Layout, Define Screen Layout for Asset Master Data.
Double click Define Screen Layout for Asset Master Data.
Select your screen layout and double click "Logical field group" folder.
Then double click on "3 Time dependent data" and double click "Field group rules".
Here maintain the rule for business area exactly as it looks like for cost center.
Hope this helps you....
Regards,
Sreekanth....

Error during asset transfer: No depr areas for receiving revenue

Similar Messages

Maybe you are looking for