Assign Batch Class to Material - Using Upload

Hi All,
I have a requirement to assign batch class to material master (MM01 / MM02) - Classification view - Batch Class (022).
This assignment has to be done through a upload program (BDC / LSMW / BAPI). Can someone please suggest me the best possible option.
Note:
1. I don't want to assign batch characteristics values. Just wanted to assign batch class to material.
2. I have already created LSMW to load material master using LSMW direct input approach.
Thanks,
Somu

Hi Dev,
My existing LSMW was created using direct input approach which has no option to assign Batch Class to material.
So my thought is to create a separate program (LSMW / BDC / BAPI) to assign batch class to material.
Any best possible option please?
Thanks,
Somu

Similar Messages

How to assign multiple batch class to material in classification view

Dear Gurus,
How to assign multiple batch class to material in classification view.
plz explain what are the procedure and what are the configuration required before assignment.
Thanks
Mani

OK, Thanks for your reply.
Regards
Mani

Find batch class of material and characteristics

Hello Experts,
can anybody send sample code to derive the batch class of the material and list of characteristics that are assigned to that class.
Thanks in advance.
Zak.

Tables used for batch characterastics are:
MCH1
AUSP
CABN
MCH1->CUOBJ_BM = AUSP->OBJEK (see preceding zeros)
AUSP->ATINN = CABN->ATINN
Thanks
Ganesh

Assign Batch Class Automatically to A Retail Article

Dears,
Please i want to know if i have the possibility to assign a batch class 023 to An Article once i create it ?
Thanks in Advance
Abdallah Galal

Is there any Update?

Create Batch Class in Material Master

I need to create the Batch class for n number of materials.
I am using the BAPI BAPI_OBJCL_CHANGE but it is not createing the Class. It says no Batch exists.
There are no Batches created for the Materials which FM or BAPI can be used to create the Batch Class which don't have the Batches.
I tried manually though MM02 it is working like for class 023 Class FERT03 it is createing but not via BAPI BAPI_OBJCL_CHANGE.

Hi Abhishek
I had a simillar isssue last year trying to create an equipment class. I had to finally use bdc.
Why dont u try to use bdc on mm02, or if u 've that much of patience u can debug mm02 to see how its being done in sap.
Best of luck.

Batch class at plant level

Hi Guys,
Is it possible to assign batch class for a material at plant level, the scenario is the material is produced in two plants the batch characteristics for the both plants are different , and hence i want to assign two different batch class to a material .
Thanks and regards
Thamizhchelvan G

Thamizhchelvan,
You cannot have Plant wise Batch Class as this is client level data.
What can be done is assign all the possible characteristics to the Batch Class and assign that class to Material master and you can define the Inspection plan with MIC which are as required by individual Plants, based on this Results would be recorded and Inspection Results can be transferred to Batch Classification for that particular data.
Regards,
Prasobh

Batch class for MM

HI
I have assigned batch class 023 in Material Master.
I wanted to retrive this information from tables. Can any one please guide how to retrive this information from SAP tables
SK

Please check these answered links:
batch table
What is the field and Table for "Batch Class" and "Class Type" in QM.
TO FIND BATCH MATERIALS
Table name for Batch Class type
Re: table involved in mmbe transaction
Edited by: Afshad Irani on Jun 1, 2010 10:47 AM

Changing Batch Level from Material Level to Plant Level.

I want to create the batch class with the class code 22 instead of 23. As the batch class is maintained at the Material Level, not at the Plant Level. So is it possible to change the batch class from Material to Plant Level and create batch class with code 22.
Kindly suggest.

Hi, Thanks for ur reply.
I have applied SAP notes and changed the batch status from material level to plant level...But still i am getting the class type as 23.
What are the next steps to be done. Currently in OMCT, Batch Level Conversion tab is active and rest all the tabs are in inactive state. so please guide.

Material Classification Upload using LSMW

Hi SAP Experts,
We are thinking of using LSMW as a means to upload our material master data for the classification view. How is this done?
Can we use LSMW to upload materials with many class assignments with multiple characteristics?
Ex. Material A is assigned to class X and class Y. Class X has characteristics 1, 2, and 3. Class Y has characteristics 4, 5, and 6.
Would appreciate a swift response.
Thanks in advance!

Hi All,
If it is the existing material you need to modify the Classification type. It can be done by BDC. If you instruct the ABAP team they will make it & give. I am not sure about modifying classification type using LSMW. If you need to create a new material master data with classification using LSMW i will give the steps.
Check out this link for LSMW Steps:
www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
Reward if useful.
pherasath

Traceability with batch class characteristics in batch where used list.

Hi,
I have a process order which issues 5 pallets or material and produces 5 pallets of another material. Each pallet is a seperate batch in my scenario.
All materials are assigned to a batch class and i will be using a class characteristic to enter the issued pallet number (includes material number and batch number) to the produced pallet batch. This way i want to create a traceability system.
the problem is i need a way to create a hierarchical view or integrate this scenario to batch where used list.
there is a badi for where used list to read external data. but i guess that is for something called "external batches"
can you please guide me for the best practice of doing this?
Thanks,
Alper,

Hi!,
I think you have to use the mix of two functionalities:
1. Original batch function
2. Batch derivation
This way you can pull the characteristics of the source material batch in to raw material as well as finish material batches.
In this you have to create a nonvaluated material which is used as original batch mateial. You have to assign this material in material master of the RM and FG alongwith other required entries. Also you have to use batch derivation function to pull the charactristics of this original material batch in to the RM and FG.
Please go through the SAP help regarding Original batch and Batch derivation function to have more clarity.
Please revert back in case of any further issue.
Regards,
Uday

Assigning of Classes to superior classes Using SXDA_Tools...Urgent

Hi All,
I have a requirement in which i have to create classes(Material classes, CL01) and subclasses for them. In the second step i will have to assign the created sub classes to their respective superior classes.
I could create classes using batch input program "RCCLBI01" and object type BUS1003 from transaction SDXA_TOOLS.
However i am not sure how to assign the created classes to their respective superior class. Does anyone know any direct input program or batch input programs to assign a class to its superior class ??

See [http://forums.sun.com/thread.jspa?threadID=5333060&tstart=0]. In general, if you use third-party libraries in your code, you should include these libraries in Javadoc's classpath option when generating documentation.

While assigning batch material get locked in different plant.

Dear Guru,
After implementation ,frequently facing problem, In CO02 we are assigning the batch manually to the material but one material is configured with valuation type domestic / import. while assinging the bacth to the material system showes to another user who iis entering the same material in different plant is xxxx user is locked the material so u cant assign the batch, but batch we are maintiaining in material level. (batch maintianed in material level.)
currently we are going in sm12 transcationa and removing the lock, but we want to know why it is happening. what is the root cause for the error.
Please advice.
Thx
Nara

HI
It is Standard SAP at a time same material or its masters cannot be used by multiple users ids or with same user id also
system gives error material is locked.You can unlock it thru SM12 but be careful while soing so some the data which the another user using may be or may not be lost.
the better way is to ask the user to come out of that material or release it after doing his work
Regards
Anupam Sharma

Batch Class Assignment

Dear All,
I have created a material with batch management & i have assigned a Class of type "023" in the classification view.
When i open the same material again there is no class assigned to the material.
this is happening to all materials.....
plzzz guide
Cheers

Hi,
Refer below thread which is similar to your problem,
[Class not assgin|Re: Batch class assignment on a material]
Regards,
Dhaval

BDC/BAPI Assign characteristics to material using CL24n

Hi Gurus
My requirement is :
We have already assigned characteristics to the material class, Now we need to assign characteristics values to materials.
Assign characteristics to material using cl24n(Class name & Classtype) > only new assignments > material.
What should I go for ? BDC or BAPI.
Please suggest me how to proceed with BAPI as I personally feel BAPI is better than BDC.
Thanks in Advance
Dinesh

BAPI/BDC for assigning characteristic to material

How to find batch class based on material number

Hi experts,
Can any one say how to get Batch class number by giving material number as input
regards
subbu

Hi ,
check in MCH1 table.....
or try this way..
By using this function module you can get the batch class related to material..
* Retrieve Material Batch Classes
CALL FUNCTION 'CLAF_CLASSIFICATION_OF_OBJECTS'
    EXPORTING
      classtype          = zc7b1_batch_class_type
      features           = 'X'
      language           = 'E'
      object             = w_object             "Pass material Number with leading zeros
      objecttable        = 'MCH1'              "Pass table MCH1
      initial_charact    = 'X'
    TABLES
      t_class            = t_lclass             " check here what are all the classes related to material
      t_objectdata       = t_objectdata
    EXCEPTIONS
      no_classification = 1
      no_classtypes      = 2
      invalid_class_type = 3
      OTHERS             = 4.
Prabhudas

Assign Batch Class to Material - Using Upload

Similar Messages

Maybe you are looking for