Assign Delivery Serial numbers to the Handling Unit

Hi,
How can i Assign Delivery Serial numbers to the Handling Unit, is there any User exit to populate serial numbers from delivery to Handling Unit numbers.
Thanks.

Isn't this controlled through config? Check here.
Implementation Guide for R/3 Customizing (IMG)
-->Logistics Execution
   -->Shipping
      -->Basic Shipping Functions
         -->Serial Numbers
            -->Determine Serial Number Profiles
Also see if it can be achieved through copy control and data transfer routines or requirements.
Srinivas

Similar Messages

LT12: how to manipulate the handling unit

Dear all,
This is my first message on this forum and I've seen many bright lights on this forum so I have high hopes of your response to my question : )
When I want to confirm a transfer order with trx LT12, 2 Handling Units (HU) are assigned (which can be seen in the lower part of the screen). I have 2 items in my active worklist (different storage units) and can modify some fields, including the HU. For some reason both items have the same HU (the upper one of the assigned HU). I would like the first item to have the first HU and the second item to have the second HU.
My question is simple (and I had thought this would be possible but I've tried a LOT and did not succeed, hence my cry for help here): is there a possibility to manipulate the Handling Unit before it is shown on the screen? I did not seem to find a suitable BADI/user exit.
Any help would be greatly appreciated. Thanks in advance for your efforts!
With kind regards,
Roel van den Berge

Dear Roel van den Berge
if iam not wrong you can achieve the same by TO split
Transfer Order Split
Use
To optimize processes in the warehouse, it often makes sense to split up putaways and stock removals into smaller packets according to certain criteria. In doing so, it is important, for example, to:
     Distribute the workload equally amongst the warehouse workers
     Optimize stock movements in the warehouse according to certain criteria.
The transfer order (TO) represents a work package and determines the actual workload for a putaway or stock removal. It can therefore make sense to split a single, extensive transfer order into several smaller transfer orders. During the TO split, the system creates several smaller packets from one large one.
During the TO split, the TO items are divided up between one or more TOs. A TO split does not however mean that the system divides individual items of a TO into smaller TO items.
Prerequisites
1.     You define the criteria according to which the TO split is to occur in the Customizing for Warehouse Management under Activities  Transfers  Processing Performance Data/TO Split  Define Profiles.
a.     To define a TO sort profile, choose Sort profile for TO splitting.
In the sort profile for the TO, you define the criteria according to which you want to sort the items in a transfer order before the actual split.
For each of these sort criteria, you define whether the system is to sort the transfer order items in ascending or descending order.
Before the actual dynamic TO split, you must sort the corresponding TO according to certain criteria. By sorting the TO items, you ensure that the TO split is sensibly executed and that no nonsensical TO splits occur.
b.     To define a TO split profile, choose Profile for Transfer Order Splitting.
c.     You assign your sort profile to the TO split profile by entering it in the field Sort profile.
2.     You determine when the TO split should take place in the Customizing for warehouse management under Activities  Transfers  Processing Performance Data/TO Split  Control for Performance Data Processing/Define TO Split.
You also assign a key to the TO split profile, consisting of a warehouse number, movement type, source storage type and destination storage type.
Features
Standard Sorting of TO Items
Control of the TO split occurs on the basis of the sort. The system defines the sequence of the items in the transfer order before the actual TO split via the sort, so that the sequence of the TO items corresponds to an optimal sort sequence for later processing.
Since the system always executes the forced split of the transfer order items according to the forced split criteria, the system always sorts the TO items in the standard sort in accordance with the forced split criteria in the order that the forced split criteria are processed.
Forced Split
Even if you have not set any user-defined criteria for the TO split, the system always executes a TO split according to the following forced split criteria:
     Planned data is required
The TO split first divides the TO items for which planned data creation is required, from the TO items for which planned data creation is not required.
The TO split also causes a further division for all TO items with planned data creation, according to the source storage type and destination storage area criteria.
     Per split profile
As soon as TO items differ from one another in the split profile to which they are assigned, a TO split occurs according to the split profile criterion.
     Per performance data profile
As soon as TO items differ from one another in the performance data profile to which they are assigned, a TO split occurs according to the performance data profile criterion.
     Per staging area
The TO split divides the TO items according to the staging zone to which they are assigned.
     According to mixed pallets
The TO split then separates the TO items containing mixed pallets from those containing no mixed pallets.
The TO split also creates a further division of all TO items with mixed pallets according to the storage unit that is to be moved.
     According to queue
The TO split divides the TO items according to the queue that these TO items are assigned to.
If you work with queues, you can assign each work area to its own printer. That way, all materials that are to be processed in a specific area can be combined in one list and printed on the assigned printer.
     According to handling unit items
The TO split then separates the TO items containing handling units from those containing no handling units.
     Separate confirmation of the withdrawal step and the transfer step is necessary
The TO split divides the TO items with split confirmation from TO items for which split confirmation is not planned.
The system transfers the information on the forced split to the header via the transfer orders, which are created as a result of the TO split.
The forced split criteria are obligatory. You cannot influence the forced split via the user exit. The system does not adopt any changes to the forced split criteria.
Dynamic Sorting
Before you can execute a dynamic TO split controlled via the Customizing settings, the TO items should be sorted according to the split criteria. In doing so, you ensure that the TO split is sensibly executed and that no nonsensical TO splits occur.
You can define the sequence of all the storage bins in the warehouse based on a specific sequence and sort the TO items according to this sequence. The system sorts according to the Sequence indicator in the warehouse master data.
Dynamic Split
You can define several criteria for the TO split in the Customizing for Warehouse Management.
     Split according to movement unit
On the basis of this split criterion, you create a new TO for each movement unit. In doing so, you create TOs with one item for exactly one movement unit.
You use this split, for example, during goods receipt when a whole pallet is moved from the GR area into the warehouse.
You define the split according to movement unit in the Customizing for Warehouse Management under Activities  Transfers  Processing Performance Data/TO Split  Define Profiles  Profile for performance data with the indicator Split single TO.
     Split according to picking area
You divide up the items to be picked according to the areas of responsibility of the picker.
     Split according to target times in the TO
You determine, for example, how long the picking for a transfer order is allowed to take.
     Split according to scope (weight or volume)
You determine the total weight or volume that a transfer order can cover for putaway or stock removal.
Note that the volume is calculated based on the alternative unit of measure. A box with 10 bottles, for example, can have a different volume than 10 times the volume of one bottle. If the volume for the alternative unit of measure has not been defined in the material master record, the system uses the volume from the base unit of measure for its calculation.
Activities
Note that you have no influence over the TO split according to forced split criteria.
You can, however, define your own criteria for a dynamic TO split via user exit MWMTO012. For more information, see the system documentation on this user exit

Internal Number Assignment for Serial Numbers

Hi Experts,
Can you use internal assign alphanumeric numbers in the system?
Also is the creating of serial numbers at the purchase order stage possible?
Thanks,
John.

Dear,
Have a look at : Re: serial number ranges
Regards,
Syed Hussain.

Unable to delete the Handling Unit

Hi Friend,
I wanted to delete the delivery document, when i unpack and delete the Handling unit i am getting the following error "Handling Unit 2000679441 contains item that cannot be deleted" in the Log" Handling Unit 2000679441 is packed - only entire HUs can be reassigned"
Need assistance.
Thanks in advance.
Regards,
Kannan M

Try using packing station functionality tcode HUPAST.
Select delivery from the dropdown and give delivery number in the next screen.
System will populate the HU content of the delivery.
Give negative quantity of material and material number and save the transaction.

SAP table for finding Quant from the Handling unit

Hi All,
I would like to know the SAP table name - from the handling unit (where the stock received in the Warehouse), i would like to corresponding Quant ?
PSS

Hi,
To know the QUANT for handling unit, use the table LQUA.

How can I get serial numbers or the free versions of Adobe, Air, Flash Player 14, and Reader XI Pro

How can I get serial numbers or the free versions of Adobe, Air, Flash Player 14, and Reader XI Pro that I had installed on my computer before Microsoft crashed my computer and I had to do a fresh install? I finished reinstalling Win 8.1Pro on my computer thanks to Microsoft Lvl 1 Techies corrupting my Command Structure so nothing would work. I had recently taken a picture of my installed programs (control panel, uninstall programs list) so that I would be able to reinstall everything I needed. I can't seem to find an email for the Reader which I remember paying for, the others I believe were free installs. Can anyone help me out.

Safari Version 5.0.5 < from your first post
5.0.5 is an outdated version of Safari.
There is an update available for Safari for version 5.1.1
That may help.
Click your Apple menu icon top left in your screen the click Software Update
Restart your Mac after the updates are installed.
Try full screen ...
If you have problems using Software Update from the menu you can use the standalone installer here > Safari 5.1.1

How can i see the serial numbers of the hardware I have registered? my copmuters have been stolen and I'm missing one serial number.

how can i view the serial numbers of the hardware I have registered? my computers have been stolen and I'm missing one serial number.

- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

Serial numbers for the sensors

Is there another means for obtaining the serial numbers from the NIDS sensors without having to physically go to each one and manually record the number?

In version 5.x, the serial number is available (show ver CLI command or via IDM->monitoring->System Information). In version 4.x...I don't think so.

Where can I find the serial numbers of the defective Seagate 1T hard drives?

Where can I find the serial numbers of the defective Seagate 1T hard drives that were in iMacs?
I tried Seagate site.
Not the iMac serial #, I know about the recall program. We are looking at a refurbished (not Apple) iMac & it has a Seagate 1T HD, naturally, we want to know if it is one of the bad ones.
Thanks for your help.
Sorry for the large font, I have vision problems.

Apple icon on the menubar->About this Mac->more info->Hardware->Serial ATA. This is what's on mine:
ST31000528AS:
Capacity:          1 TB (1,000,204,886,016 bytes)
Model:          ST31000528AS
Revision:          AP2E
Serial Number:                      9VPFJ89K

How to insert serial numbers in the creation of a delivery via VL01N

Hello everybody,
In the creation of an outbound delivery via VL01N I have to copy the serial number from a specific inbound delivery. I can get these serial numbers but I do not know where or how I can insert these serial numbers.
I have to insert them just after the user press enter in the first screen of VL01N (before the delivery number is created) I cannot use a bapi like BAPI_OUTB_DELIVERY_CHANGE because the delivery is not created yet.
Could anybody tell me how to do it? Any BAdI/Exit I can use? and which internal table I shoud update?
Thanks a lot.

But this is impossible! Believe me! When I open Creative Cloud.app, the window which pops out says :
===========================================
APPLICATIONS INSTALLEES (= Installed applications)
Indesign CC (2014) ----- A jour (= up-to-date)
Acrobat XI pro ----- A jour (= up-to-date)
TROUVER DE NOUVELLES APPS (= Find new apps)
Photoshop CC (2014) ----- Installer (Install)
etc., etc.
===========================================
In the second part of the window, you have already installed apps, as Photoshop, which have not been updated as well as apps I have never installed, as Scout CC.
So it is impossible to install Indesign anew.
When I click on the small gear, a small window opens up, and I can check that in Preferences/Apps that the "Langue de l'app", that is the "Language of the app" is "English plus hebrew (some hebrew characters)
", since i made this choice yesterday, as you told me.
And nevertheless, the Creative Cloud.app does not want to download any new Indesign application.
It is not possible to ask the people at Adobe who have designed CC.app?
Thank you,
André Bellaïche

How to generate the handling unit in alphanumeric by sequence

Is there any way to serial generate the box id in alphanumeric?
such as number range set is from 00000 ~ ZZZZZ
when the number is 00009, the next number can be auto got as 0000A,
can SAP support this function?

Could you please point me in the right direction of how to set up handling unit ranges with alphanumeric characters?
Thanks

I am trying to locate my serial numbers for the two creative cloud products? Illustrator and Photoshop.

We subscribed to Adobe Creative Cloud last October, purchasing a single copy of Illustrator and Photoshop.
The Web developer we had subsequently left the company, and I removed and re-assigned the products to our new Web developer in the Adobe Creative Cloud admin console and sent the 'welcome' emails to him.
He said the mails weren't sent, so I re-removed and re-added him in the console but although it states the welcome email has been sent, the user is still marked as pending?
James has fried to use the products, both of which show up as trial versions, asking for the serial numbers to be entered to unlock the full products & I don't have any record of them, nor can I find them under the CC profile?
I purchased the software through Softcat and received confirmation emails from Adobe that the products were activated and ready to download.
What have I done wrong?
All help welcomed!
Regards,
Martin.

Ask for serial number http://forums.adobe.com/thread/1234635 has a FAQ link
or
Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
or
http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
Membership and Payments http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html

Serial Numbers in WM Storage Units

Hi all:
My client needs to manage serial numbers in WM. I am planning to propose to use the storage unit as storage for serial numbers. This WM will not have HUM, no batch management. Plant will use valution type.
Can anyone tell me what are the pros and cons for storing serial numbers in Storage Units in a non HUM WM?
We are implanting WM in SAP ECC 6.0
Thanks in advance for any help.

Hi Juan
Are you talking about managing serial numbers with storage unit management? When we use serial number management every material within the storage unit number will have a serial number. For ex:- if a storage unit number has 10 pcs in it then system would generate 10 serial numbers. You will need a BADI 'LE_WM_INV_WM_IM' and add data serial number in the class to control serial number function in WM. Check OSS 559531 for more info.
Thanks
Anandha

Assignment of Serial No to the customer other then we sold the goods !!

Hi All,
My Scenario is channel business where my client sells the machine with serial no. to his distributors, Now the distributor is selling the machine to end user.
Now our client wants the machine serial no. should be assigned to the end user instead of his distributors as the end user will come for service of the machine to my client !!
Regards,
Kumar

Thanks Maheswaran,
Thanks for your answer !!
It is the same serial no. of machine which is going from the client to distributors & from distributor to End User !!
As per standard SAP we assign serial no. at the time of delivery of the machine, after PGI system assigns the serial no. to distributors.
If this distributor has sold this machine to end user & end user comes in CS department for the servicing of the machine, Then is it possible to assign the serial no. manually to the end user which is assigned to distributor so far ??
Regards,
Kumar

Sending Serial numbers of the article to IS RETAIL to POS system

we are doing implementation to an Electronic Retailer. For this retailer we have to maintain <b>serial number</b> in our inventory for each and every article for Goods Receit as well as Goods Issue. Here we are getting Serial Number option at the time of Receiving GRN through MIGO. But we need to send the same serial numbers to POS system through IDOC. After sales we receive the same serial number through inbound IDOC.
For this Process i need information how to send/receive IDOC for this serialised articles. Message Types. If possible T-code if it is having seperate t-code
Regards
Venkat
Ph : 9818362694

Hi Venkat
IDOC WPUUMS how much segment you have used for data transfer
There is one enhancement type segment u can use that segment for serial number
segment that u can use E1WXX01
Thanks
Amit Shivhare

Assign Delivery Serial numbers to the Handling Unit

Similar Messages

Maybe you are looking for