Assigning a different mask for the same role

Hi All,
I have two users user1 and user2 are created in MDM and each assigned to the same role say role1.
My requirement is user1 should get data of catagory 1 where as user2 should get all the main data in MDM.This catagory 1 is part of the main data.
For this scenario i have created a mask say for example catagory1_mask for catagory1 data and assigned this mask to the role role1 where user1 and user2 are being assigned to this role.
And i have one more mask all_mask for user2 where i have assigned all the records of the main table to this mask. So when user2 logs into the MDM he would get all the data in MDM.
If i assign this all_mask to the role1 user1 cal also access the whole data including user2. But as per the rqmt user1 should not access the whole data but have to access only catgory1 data.
Can anybody advice me how can i assign a different masks to a one role when 2 users have been assigned the same role?
Regards
Sireesha.

Hi Jitesh,
I am getting one issue after creating duplicate role in portal.
As u know i have created 2 duplicate roles for user1 and user2. Before creating the duplicate role i was able to see the user1 and user2 in the SRM MDM UI page of general tab.
After creating the duplicate roles for these users am not getting the user1 and user2 in the User dropdown field of MDM UI screen...
Is this bcoz of creating duplicate role?
How can i get the user1 and user2 here?
Please advice me...
Regards
Sireesha.

Similar Messages

[JAXB] Several different prefixes for the same namespace

Hi!
I have generated some code from 2 schemas using JAXB. One of them (the main) defines some elements and the other one defines values for those elements. Then, when runring my code, I get an XML document with elements from the main schema an elements from the other one. However, elements from the second schema are qualified with different names. That is:
<party>
<ns3:uid xmlns:ns3="http:/schema1.com/schema1">CN=User1 - RSA/RSA,OU=IAIK,O=TU Graz,C=AT</ns3:uid>
<ns4:role xmlns:ns4="http:/schema1.com/schema1">client</ns4:role>
</party>
As you can see, I get two different prefixes for the same namespace.
Could you be so kind as to tell me if there is a way of getting only one prefix for each namespace, please? Do I have to modify JAXB compiler's properties???
Thanks a lot in advance.

No, I don't know how to do that. I also don't think it should matter. Are these multiple prefixes causing you any problems other than offending against Occam's Razor?

Can we get a output in different languages for the same configuration

Hi All,
Can we get a output in different languages for the same configuration done in NACE. or it is language specific.
They have symbols which have values both in german and english. But when we run the transaction we are getting the output only in german language.We want the out put in english
language.
Thanks in Advance.
Rajesh

A Smartform can be maintained in many languages other than the language that it is created. Translations for the texts have to be maintained for this purpose.
To maintain the translations:
Go to transaction SE63 in R/3.
Go to menu Translation->R/3 Enterprise->Other Long Texts
Select the object type in the pop up. Smartform(SSF) object type is found under Forms and Styles(FS).
Enter the name of the Smart form and choose the source and target language. This would open a screen with the Smartform code in Source language on the top and an editor with the same code in the bottom.
Find the text for which you need to maintain the translation and insert the translation in that place. As usual after required texts are maintained Save and Activate.
To see the translated Smartform create an output type and assign the smartform and the driver program to this output type. In the transaction that sends output to this smartform, select the output type and select the language in which the smartform has to be displayed (translations have to be maintained in this lanuage).This will give the smartform in the required language.
Madhavi

Users have more than one profile for the same role

Hello,
As I said in my earlier post I'm rather new to SAP.
I'm doing now the security audit of my SAP system. In particular, I'm checking whether business users have access to DEBUG functionality.
I have run report 'Users by complex selection criteria' and found certain number of such users. Then I looked further and discover that all these users have role X assigned to them. The profile P2 of the role X displayed in PFCG has DEBUG functionality deactivated. After second look I discovered that all these users have earlier profile P1 for the same role X assigned to these users. This profile P1 contains the functionality in question.
I solved the issue by revoking the role X from the users and assigning it again. Both P1 and P2 profiles were removed from the users and only P2 was reassigned again.
I used to think that role may have only the profile that is displayed in PFCG? Also, I used to think that if the role profie is regenerated the newly generated profile automatically replace the old one assigned to users. Am I wrong?

Hi Pavel
In simple and short ..
Role contains authorization objects..
Maximum limit of authorization objects for a role is 150 .
So a role can accommodate 150 authorization objects.
New Profile ABC is created , when ever you create a new role. 1-1 relation.
But if a role has more than 150 authorization objects .. then automatically a new profile ABC01 will be created and it will also be aligned to that role .
if role has 400 auth objects, then profiles will be ABC ,ABC01 ,and ABC02
i hope this helps you
Cheers
Pavan M

Schedule parallel activities on different resources for the same period

Hi,
I am trying to create a PPM where I need to define parallel activities on different resources for the same time period.
For example:
Input prod: P1
Output prod: O1
Now I define a dummy activity A1 to define this consumption i.e. 1 PC of P1 gives 1 PC of O1.
Now I have got 3 resources R1, R2, R3.
I define 3 activities A2, A3, A4 for these resources.
Now I have to arrange activities A2, A3, A4 such that they start simultaneouly after activity A1 and also end simultaneouly.
The Fixed duration for all the resources is 1 week.
My requirement is that out of these resources system should plan for demand considering the resource with minimum capacity
i.e. kind of bottleneck resource.
I am using CTM engine for planning.
I have defined A1 as predecessor for all the 3 activities A2, A3, A4 and after completion all the activities have a dummy successor activity S.
But this setting is not working and PPM is not getting exploded, If I use a normal linear relationship between activities it works fine but my requirement is not getting satisfied.
Can anyone please help me in this case or suggest some alternate method.
Thanks & Regards,
Sanjog Mishrikotkar

Hi,
You cannot use the old solman key as systems are on different server.
I think you have to delete the old Dev system and then generate new solman key.
Thanks
Sunny

APs using different channels for the same SSID

Hi,
This might be a stupid question, but I am wondering why my Aironet 1602i and 2602i access points connected to the same controller would use different channels for the same network. Would this be to avoid interference? If so, I am planning to put 9 access points throughout the office and they will be fairly close to each other. Would this increase the risk of interference?
Thanks,
Tibet

That is normal. The WLC is determining the best channel and being in different channels is the best. When you add more, the WLC will decide by the use if RRM what channels and power levels to allocate to each AP.
Sent from Cisco Technical Support iPhone App

Java-puzzlers...Why 2 different outputs for the same line

Here, why it is giving 2 different outputs for the same set of lines
Line-1 and Line-2 are both same.But giving 2 different results ???
/*java-puzzlers*/
public class Elementary {
    public static void main(String[] args) {
         System.out.println(12345 + 5432l); /*Line-1: Original statement- didn't modify*/
      System.out.println(12345 + 54321); /*Line-2: I wrote - I delete 12345 + 54321 and wrote the same thing again*/
}

kjshikal wrote:
one of them is a longkjshikal,
For the third and final time. Please stop resurrecting old threads like this.
Thank you for your co-operation.

If I already have a particular app under one apple Id and I purchase the same app under a different Id for the same device, will it overwrite or replace the previous or will I have two of the same app on the same device??

If I already have a particular app under one apple Id and I purchase the same app under a different Id for the same device, will it overwrite or replace the previous or will I have two of the same app on the same device??
I'm asking because I purchased an app with an id that has been cancelled so I cannot update that particular app. I can purchase the app with my new id but I don't want to do so if its going to erase all the data I have with the previous purchase...

Figured it out. Thanks.

Different authorizations on different cubes for the same characteristic

Hello,
Is it possible to implement different authorizations on different groups for the cubes characteristic?
For example a user should be authorized to see just the data of company code 101 on Cube A but he should see the data of all company codes on Cube B (Cube B also contains the company code. ":"-Authorization is not an option)?
In transaction RSECADMIN it is possible to insert the "special characteristics" Acitivty, InfoProvider and Validity into an authorization. But standard setting for InfoProvider is * and I get an error message if I want to modify for just 1 Cube because the characteristic "InfoProvider" (SAP Content) isn't marked as authorization relevant.
Can you please answer:
1) If it is possible to implement different authorizations on different cubes for the same characteristic?
2) What is the function of the special charactristics if I can't maintain the values?
Thank you
Johannes

Hi there,
Yes it is possible.
The new authorization concept created union also based on InfoProvider Characteristic.
You have to change in rsd1 transaction the characteristics 0TCAACTVT, 0TCAKYFNM, 0TCAIPROV and 0TCAVALID to be authorization relevant.
So you can do this:
Create two authorizations in rsecadmin like this:
Aut_1:
0comp_code: 101
0TCAACTVT: 03 (activity of display)
0TCAKYFNM: * (all key figures)
0TCAIPROV: Cube A
0TCAVALID: * (authorization valid for ever)
Aut_2:
0comp_code: *
0TCAACTVT: 03 (activity of display)
0TCAKYFNM: * (all key figures)
0TCAIPROV: Cube B
0TCAVALID: * (authorization valid for ever)
Now in rsecadmin give both authorizations aut_1 and aut_2 for the user.
If the user opens a query built on cube a he will be having authorizations only for company code 101. If the user opens a query for cube B he will be having authorizations for all the company codes.
Diogo.

Invoice posting with different currency for the same PO

Hi,
Can we post the the Invoice with different currencies for the same PO.
For example.
PO has Qty 100 pcs. amount 100 USD
GR Qty 100 pcs.
Is it possible to post Invoice of 50 pc with 50 USD, and 50pcs with some other currency.
Any sugggestions pls.
Thanks,
Satya

Hello
As per my knowledge, that is not possible.
And in whjat scenario, we need to do that?
In MIRO header itself we have the vendor currency, so it is not posbile to maintain different currency in different line items in MIRO.
If you want, you can do MIRO in different currency that what is in PO.
In the example given, you have o post 2 invoices, one for 50 qty in USD and the other 50 in different currency in other invoice transaction by giving the currency in basic data-invoice header and then only press ENTER after giving the PO number.
Hope this helps
Regards

Outlook-2 different entries for the same person (but not the same email)

i was asked to switch from outlook 2007 to outlook 2013 as a trial.
For some reason, I get two different entries for the same person (but not the same email), one which is the name as normal and one where the name has ' around it. In the below example:
I have 24 emails sent to Ciaran and then a further 14 sent to 'Ciaran'
The email address for both is exactly the same and it does not seem to matter if I create a new email or reply to an incoming one.
I switched back to Outlook 2007 and the issue is still the same.
any suggestions?

I would say that there is no way to prevent Outlook from doing it, it dependents on how the sender formatted the sending address, not the recipient who replies.
To fix this:
Open the message and double click the address and view source
Just replace the generated Display As with the Display As you want
Thanks,
Ethan Hua CHN
TechNet Community Support

Filter the content on different queries for the same infoprovider and user

Hello,
We are trying to make the following security scenario in BI, and have
problem with the analysis object concept to filter at query level.
The idea is to permit to :
- user A
  - to execute query Q1 and view information about sites 1,2,3
  - to execute query Q2 and view information about sites 4,5,6
but for example for another user :
- user B
  - to execute query Q1 and view information about site 1,3
  - to execute query Q2 and view information about site 5,6,7
Q1 and Q2 are queries from the same infoprovider.
The idea is to make an automatic generation of analysis objects based
on the standard program : RSEC_GENERATE_AUTHORIZATIONS.
During tests, we have faced a problem with the object 0TCTQUERY that we
thought will permit us to filter at the query level, but unless we add
the name on the query on a role in the S_RS_COMP authorization object,
field RSZCOMPID, the query is not granted to the user.
The fact that we use both authorization objects : one for the query
definition, and another for the analysis authorization concept
(S_RS_AUTH, field BIAUTH), has disastrous effect : all values given in
the analysis objects are for all queries of an indicated infoprovider.
With that system, it's then not possible to propose dynamically different
views of the same data (ie from same infoprovider) based on the
authorization concept unless using the technic of customer-exit variable,
but with variable you will have a problem with old queries that doesn't
have a variable and that will permit to see all data given in the new
authorization objects.
Is there exists another object to filter at the query level in the
analysis objects ? If it's not the case, what is possible to do to reach
our goal with the new authorization concept ?
Thank you in advance for your help.
Best regards,
Gaël.

The data is protected on infoprovider level and not on the query level, so when two querys are build from the same Infoprovider then the authorizations are the same,
To achieve what you want to do, the querys must be built off different providers.   This can be achieved by placing the infoprovider in 2 differnt multiproviders and building the querys and authorizations seperatly on these.

CBO generating different plans for the same data in similar Environments

Hi All
I have been trying to compare an SQL from 2 different but similar environments build of the same hardware specs .The issue I am facing is environment A, the query executes in less than 2 minutes with plan mostly showing full table scans and hash join whereas in environment B(problematic), it times out after 2 hours with an error of unable to extend table space . The statistics are up to date in both environments for both tables and indexes . System parameters are exactly similar(default oracle for except for multiblock_read_count ).
Both Environment have same db parameter for db_file_multiblock_read_count(16), optimizer(refer below),hash_area_size (131072),pga_aggregate_target(1G),db_block_size(8192) etc . SREADTIM, MREADTIM, CPUSPEED, MBRC are all null in aux_stats in both environment because workload was never collected i believe.
Attached is details about the SQL with table stats, SQL and index stats my main concern is CBO generating different plans for the similar data and statistics and same hardware and software specs. Is there any thing else I should consider .I generally see environment B being very slow and always plans tend to nested loops and index scan whereas what we really need is a sensible FTS in many cases. One of the very surprising thing is METER_CONFIG_HEADER below which has just 80 blocks of data is being asked for index scan.
show parameter optimizer
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 10.2.0.4
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
optimizer_secure_view_merging boolean TRUE
**Environment**
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE     10.2.0.4.0     Production
TNS for Solaris: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
Note: : There are slight difference in the no of records in the attached sheet.However, I wanted to tell that i have tested with exact same data and was getting similar results but I couldn't retain the data untill collecting the details in the attachment
TEST1     COMPARE TABLE LEVE STATS used by CBO
ENVIRONMENT A
TABLE_NAME     NUM_ROWS     BLOCKS     LAST_ANALYZED
ASSET     3607425     167760     5/02/2013 22:11
METER_CONFIG_HEADER     3658     80     5/01/2013 0:07
METER_CONFIG_ITEM     32310     496     5/01/2013 0:07
NMI     1899024     33557     18/02/2013 10:55
REGISTER     4830153     101504     18/02/2013 9:57
SDP_LOGICAL_ASSET     1607456     19137     18/02/2013 15:48
SDP_LOGICAL_REGISTER     5110781     78691     18/02/2013 9:56
SERVICE_DELIVERY_POINT     1425890     42468     18/02/2013 13:54
ENVIRONMENT B
TABLE_NAME     NUM_ROWS     BLOCKS     LAST_ANALYZED
ASSET     4133939     198570     16/02/2013 10:02
METER_CONFIG_HEADER     3779     80     16/02/2013 10:55
METER_CONFIG_ITEM     33720     510     16/02/2013 10:55
NMI     1969000     33113     16/02/2013 10:58
REGISTER     5837874     120104     16/02/2013 11:05
SDP_LOGICAL_ASSET     1788152     22325     16/02/2013 11:06
SDP_LOGICAL_REGISTER     6101934     91088     16/02/2013 11:07
SERVICE_DELIVERY_POINT     1447589     43804     16/02/2013 11:11
TEST ITEM 2     COMPARE INDEX STATS used by CBO
ENVIRONMENT A
TABLE_NAME     INDEX_NAME     UNIQUENESS     BLEVEL     LEAF_BLOCKS     DISTINCT_KEYS     AVG_LEAF_BLOCKS_PER_KEY     AVG_DATA_BLOCKS_PER_KEY     CLUSTERING_FACTOR     NUM_ROWS
ASSET     IDX_AST_DEVICE_CATEGORY_SK     NONUNIQUE     2     9878     67     147     12982     869801     3553095
ASSET     IDX_A_SAPINTLOGDEV_SK     NONUNIQUE     2     7291     2747     2     639     1755977     3597916
ASSET     SYS_C00102592     UNIQUE     2     12488     3733831     1     1     3726639     3733831
METER_CONFIG_HEADER     SYS_C0092052     UNIQUE     1     12     3670     1     1     3590     3670
METER_CONFIG_ITEM     SYS_C0092074     UNIQUE     1     104     32310     1     1     32132     32310
NMI     IDX_NMI_ID     NONUNIQUE     2     6298     844853     1     2     1964769     1965029
NMI     IDX_NMI_ID_NK     NONUNIQUE     2     6701     1923072     1     1     1922831     1923084
NMI     IDX_NMI_STATS     NONUNIQUE     1     106     4     26     52     211     211
REGISTER     REG_EFFECTIVE_DTM     NONUNIQUE     2     12498     795     15     2899     2304831     4711808
REGISTER     SYS_C00102653     UNIQUE     2     16942     5065660     1     1     5056855     5065660
SDP_LOGICAL_ASSET     IDX_SLA_SAPINTLOGDEV_SK     NONUNIQUE     2     3667     1607968     1     1     1607689     1607982
SDP_LOGICAL_ASSET     IDX_SLA_SDP_SK     NONUNIQUE     2     3811     668727     1     2     1606204     1607982
SDP_LOGICAL_ASSET     SYS_C00102665     UNIQUE     2     5116     1529606     1     1     1528136     1529606
SDP_LOGICAL_REGISTER     SYS_C00102677     UNIQUE     2     17370     5193638     1     1     5193623     5193638
SERVICE_DELIVERY_POINT     IDX_SDP_NMI_SK     NONUNIQUE     2     4406     676523     1     2     1423247     1425890
SERVICE_DELIVERY_POINT     IDX_SDP_SAP_INT_NMI_SK     NONUNIQUE     2     7374     676523     1     2     1458238     1461108
SERVICE_DELIVERY_POINT     SYS_C00102687     UNIQUE     2     4737     1416207     1     1     1415022     1416207
ENVIRONMENT B
TABLE_NAME     INDEX_NAME     UNIQUENESS     BLEVEL     LEAF_BLOCKS     DISTINCT_KEYS     AVG_LEAF_BLOCKS_PER_KEY     AVG_DATA_BLOCKS_PER_KEY     CLUSTERING_FACTOR     NUM_ROWS
ASSET     IDX_AST_DEVICE_CATEGORY_SK     NONUNIQUE     2     8606     121     71     16428     1987833     4162257
ASSET     IDX_A_SAPINTLOGDEV_SK     NONUNIQUE     2     8432     1780146     1     1     2048170     4162257
ASSET     SYS_C00116157     UNIQUE     2     13597     4162263     1     1     4158759     4162263
METER_CONFIG_HEADER     SYS_C00116570     UNIQUE     1     12     3779     1     1     3734     3779
METER_CONFIG_ITEM     SYS_C00116592     UNIQUE     1     107     33720     1     1     33459     33720
NMI     IDX_NMI_ID     NONUNIQUE     2     6319     683370     1     2     1970460     1971313
NMI     IDX_NMI_ID_NK     NONUNIQUE     2     6597     1971293     1     1     1970771     1971313
NMI     IDX_NMI_STATS     NONUNIQUE     1     98     48     2     4     196     196
REGISTER     REG_EFFECTIVE_DTM     NONUNIQUE     2     15615     1273     12     2109     2685924     5886582
REGISTER     SYS_C00116748     UNIQUE     2     19533     5886582     1     1     5845565     5886582
SDP_LOGICAL_ASSET     IDX_SLA_SAPINTLOGDEV_SK     NONUNIQUE     2     4111     1795084     1     1     1758441     1795130
SDP_LOGICAL_ASSET     IDX_SLA_SDP_SK     NONUNIQUE     2     4003     674249     1     2     1787987     1795130
SDP_LOGICAL_ASSET     SYS_C004520     UNIQUE     2     5864     1795130     1     1     1782147     1795130
SDP_LOGICAL_REGISTER     SYS_C004539     UNIQUE     2     20413     6152850     1     1     6073059     6152850
SERVICE_DELIVERY_POINT     IDX_SDP_NMI_SK     NONUNIQUE     2     3227     660649     1     2     1422572     1447803
SERVICE_DELIVERY_POINT     IDX_SDP_SAP_INT_NMI_SK     NONUNIQUE     2     6399     646257     1     2     1346948     1349993
SERVICE_DELIVERY_POINT     SYS_C00128706     UNIQUE     2     4643     1447946     1     1     1442796     1447946
TEST ITEM 3     COMPARE PLANS
ENVIRONMENT A
Plan hash value: 4109575732
| Id | Operation                       | Name                   | Rows | Bytes |TempSpc| Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT                |                        |    13 | 2067 |       |   135K (2)| 00:27:05 |
|   1 | HASH UNIQUE                    |                        |    13 | 2067 |       |   135K (2)| 00:27:05 |
|* 2 |   HASH JOIN                     |                        |    13 | 2067 |       |   135K (2)| 00:27:05 |
|* 3 |    HASH JOIN                    |                        |     6 |   900 |       |   135K (2)| 00:27:04 |
|* 4 |     HASH JOIN ANTI              |                        |     1 |   137 |       |   135K (2)| 00:27:03 |
|* 5 |      TABLE ACCESS BY INDEX ROWID| NMI                    |     1 |    22 |       |     5   (0)| 00:00:01 |
|   6 |       NESTED LOOPS              |                        |     1 |   131 |       | 95137   (2)| 00:19:02 |
|* 7 |        HASH JOIN                |                        |     1 |   109 |       | 95132   (2)| 00:19:02 |
|* 8 |         TABLE ACCESS FULL       | ASSET                  | 36074 | 1021K|       | 38553   (2)| 00:07:43 |
|* 9 |         HASH JOIN               |                        | 90361 | 7059K| 4040K| 56578   (2)| 00:11:19 |
|* 10 |          HASH JOIN              |                        | 52977 | 3414K| 2248K| 50654   (2)| 00:10:08 |
|* 11 |           HASH JOIN             |                        | 39674 | 1782K|       | 40101   (2)| 00:08:02 |
|* 12 |            TABLE ACCESS FULL    | REGISTER               | 39439 | 1232K|       | 22584   (2)| 00:04:32 |
|* 13 |            TABLE ACCESS FULL    | SDP_LOGICAL_REGISTER   | 4206K|    56M|       | 17490   (2)| 00:03:30 |
|* 14 |           TABLE ACCESS FULL     | SERVICE_DELIVERY_POINT |   675K|    12M|       | 9412   (2)| 00:01:53 |
|* 15 |          TABLE ACCESS FULL      | SDP_LOGICAL_ASSET      | 1178K|    15M|       | 4262   (2)| 00:00:52 |
|* 16 |        INDEX RANGE SCAN         | IDX_NMI_ID_NK          |     2 |       |       |     2   (0)| 00:00:01 |
| 17 |      VIEW                       |                        | 39674 |   232K|       | 40101   (2)| 00:08:02 |
|* 18 |       HASH JOIN                 |                        | 39674 | 1046K|       | 40101   (2)| 00:08:02 |
|* 19 |        TABLE ACCESS FULL        | REGISTER               | 39439 |   500K|       | 22584   (2)| 00:04:32 |
|* 20 |        TABLE ACCESS FULL        | SDP_LOGICAL_REGISTER   | 4206K|    56M|       | 17490   (2)| 00:03:30 |
|* 21 |     TABLE ACCESS FULL           | METER_CONFIG_HEADER    | 3658 | 47554 |       |    19   (0)| 00:00:01 |
|* 22 |    TABLE ACCESS FULL            | METER_CONFIG_ITEM      | 7590 | 68310 |       |   112   (2)| 00:00:02 |
Predicate Information (identified by operation id):
   2 - access("METER_CONFIG_HEADER_SK"="METER_CONFIG_HEADER_SK")
   3 - access("NETWORK_TARIFF_CD"="NETWORK_TARIFF_CD")
   4 - access("SERVICE_DELIVERY_POINT_SK"="TMP"."SERVICE_DELIVERY_POINT_SK")
   5 - filter("ROW_CURRENT_IND"='Y' AND ("NMI_STATUS_CD"='A' OR "NMI_STATUS_CD"='D'))
   7 - access("ASSET_CD"="EQUIP_CD" AND "SAP_INT_LOG_DEVICE_SK"="SAP_INT_LOG_DEVICE_SK")
   8 - filter("ROW_CURRENT_IND"='Y')
   9 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK")
10 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK")
11 - access("SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
12 - filter("REGISTER_TYPE_CD"='C' AND (SUBSTR("REGISTER_ID_CD",1,1)='4' OR
              SUBSTR("REGISTER_ID_CD",1,1)='5' OR SUBSTR("REGISTER_ID_CD",1,1)='6') AND "ROW_CURRENT_IND"='Y')
13 - filter("ROW_CURRENT_IND"='Y')
14 - filter("ROW_CURRENT_IND"='Y')
15 - filter("ROW_CURRENT_IND"='Y')
16 - access("NMI_SK"="NMI_SK")
18 - access("SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
19 - filter("REGISTER_TYPE_CD"='C' AND (SUBSTR("REGISTER_ID_CD",1,1)='1' OR
              SUBSTR("REGISTER_ID_CD",1,1)='2' OR SUBSTR("REGISTER_ID_CD",1,1)='3') AND "ROW_CURRENT_IND"='Y')
20 - filter("ROW_CURRENT_IND"='Y')
21 - filter("ROW_CURRENT_IND"='Y')
22 - filter("ROW_CURRENT_IND"='Y' AND "CONROL_REGISTER"='X')
ENVIRONMENT B
Plan hash value: 2826260434
| Id | Operation                            | Name                   | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT                     |                        |     1 |   181 |   103K (2)| 00:20:47 |
|   1 | HASH UNIQUE                         |                        |     1 |   181 |   103K (2)| 00:20:47 |
|* 2 |   HASH JOIN ANTI                     |                        |     1 |   181 |   103K (2)| 00:20:47 |
|* 3 |    HASH JOIN                         |                        |     1 |   176 | 56855   (2)| 00:11:23 |
|* 4 |     HASH JOIN                        |                        |     1 |   163 | 36577   (2)| 00:07:19 |
|* 5 |      TABLE ACCESS BY INDEX ROWID     | ASSET                  |     1 |    44 |     4   (0)| 00:00:01 |
|   6 |       NESTED LOOPS                   |                        |     1 |   131 | 9834   (2)| 00:01:59 |
|   7 |        NESTED LOOPS                  |                        |     1 |    87 | 9830   (2)| 00:01:58 |
|   8 |         NESTED LOOPS                 |                        |     1 |    74 | 9825   (2)| 00:01:58 |
|* 9 |          HASH JOIN                   |                        |     1 |    52 | 9820   (2)| 00:01:58 |
|* 10 |           TABLE ACCESS BY INDEX ROWID| METER_CONFIG_HEADER    |     1 |    14 |     1   (0)| 00:00:01 |
| 11 |            NESTED LOOPS              |                        |     1 |    33 |   116   (2)| 00:00:02 |
|* 12 |             TABLE ACCESS FULL        | METER_CONFIG_ITEM      |     1 |    19 |   115   (2)| 00:00:02 |
|* 13 |             INDEX RANGE SCAN         | SYS_C00116570          |     1 |       |     1   (0)| 00:00:01 |
|* 14 |           TABLE ACCESS FULL          | SERVICE_DELIVERY_POINT |   723K|    13M| 9699   (2)| 00:01:57 |
|* 15 |          TABLE ACCESS BY INDEX ROWID | NMI                    |     1 |    22 |     5   (0)| 00:00:01 |
|* 16 |           INDEX RANGE SCAN           | IDX_NMI_ID_NK          |     2 |       |     2   (0)| 00:00:01 |
|* 17 |         TABLE ACCESS BY INDEX ROWID | SDP_LOGICAL_ASSET      |     1 |    13 |     5   (0)| 00:00:01 |
|* 18 |          INDEX RANGE SCAN            | IDX_SLA_SDP_SK         |     2 |       |     2   (0)| 00:00:01 |
|* 19 |        INDEX RANGE SCAN              | IDX_A_SAPINTLOGDEV_SK |     2 |       |     2   (0)| 00:00:01 |
|* 20 |      TABLE ACCESS FULL               | REGISTER               | 76113 | 2378K| 26743   (2)| 00:05:21 |
|* 21 |     TABLE ACCESS FULL                | SDP_LOGICAL_REGISTER   | 5095K|    63M| 20245   (2)| 00:04:03 |
| 22 |    VIEW                              |                        | 90889 |   443K| 47021   (2)| 00:09:25 |
|* 23 |     HASH JOIN                        |                        | 90889 | 2307K| 47021   (2)| 00:09:25 |
|* 24 |      TABLE ACCESS FULL               | REGISTER               | 76113 |   966K| 26743   (2)| 00:05:21 |
|* 25 |      TABLE ACCESS FULL               | SDP_LOGICAL_REGISTER   | 5095K|    63M| 20245   (2)| 00:04:03 |
Predicate Information (identified by operation id):
   2 - access("SERVICE_DELIVERY_POINT_SK"="TMP"."SERVICE_DELIVERY_POINT_SK")
   3 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK" AND
              "SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
   4 - access("ASSET_CD"="EQUIP_CD")
   5 - filter("ROW_CURRENT_IND"='Y')
   9 - access("NETWORK_TARIFF_CD"="NETWORK_TARIFF_CD")
10 - filter("ROW_CURRENT_IND"='Y')
12 - filter("ROW_CURRENT_IND"='Y' AND "CONROL_REGISTER"='X')
13 - access("METER_CONFIG_HEADER_SK"="METER_CONFIG_HEADER_SK")
14 - filter("ROW_CURRENT_IND"='Y')
15 - filter("ROW_CURRENT_IND"='Y' AND ("NMI_STATUS_CD"='A' OR "NMI_STATUS_CD"='D'))
16 - access("NMI_SK"="NMI_SK")
17 - filter("ROW_CURRENT_IND"='Y')
18 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK")
19 - access("SAP_INT_LOG_DEVICE_SK"="SAP_INT_LOG_DEVICE_SK")
20 - filter((SUBSTR("REGISTER_ID_CD",1,1)='4' OR SUBSTR("REGISTER_ID_CD",1,1)='5' OR
              SUBSTR("REGISTER_ID_CD",1,1)='6') AND "REGISTER_TYPE_CD"='C' AND "ROW_CURRENT_IND"='Y')
21 - filter("ROW_CURRENT_IND"='Y')
23 - access("SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
24 - filter((SUBSTR("REGISTER_ID_CD",1,1)='1' OR SUBSTR("REGISTER_ID_CD",1,1)='2' OR
              SUBSTR("REGISTER_ID_CD",1,1)='3') AND "REGISTER_TYPE_CD"='C' AND "ROW_CURRENT_IND"='Y')
25 - filter("ROW_CURRENT_IND"='Y')Edited by: abhilash173 on Feb 24, 2013 9:16 PM
Edited by: abhilash173 on Feb 24, 2013 9:18 PM

Hi Paul,
I misread your question initially .The system stats are outdated in both ( same result as seen from aux_stats) .I am not a DBA and do not have access to gather system stats fresh.
select * from sys.aux_stats$
SNAME     PNAME     PVAL1     PVAL2
SYSSTATS_INFO     STATUS     NULL     COMPLETED
SYSSTATS_INFO     DSTART     NULL     02-16-2011 15:24
SYSSTATS_INFO     DSTOP     NULL     02-16-2011 15:24
SYSSTATS_INFO     FLAGS     1     NULL
SYSSTATS_MAIN     CPUSPEEDNW     1321.20523     NULL
SYSSTATS_MAIN     IOSEEKTIM     10     NULL
SYSSTATS_MAIN     IOTFRSPEED     4096     NULL
SYSSTATS_MAIN     SREADTIM     NULL     NULL
SYSSTATS_MAIN     MREADTIM     NULL     NULL
SYSSTATS_MAIN     CPUSPEED     NULL     NULL
SYSSTATS_MAIN     MBRC     NULL     NULL
SYSSTATS_MAIN     MAXTHR     NULL     NULL
SYSSTATS_MAIN     SLAVETHR     NULL     NULL

[ora_hash] different value for the same input

hi all,
i'm using 2 different machine running the same version of oracle (11g).
on those 2 db i have the same tables with the same datas.
for the comparisson of the data i'm using the ora_hash function (both on numeric and string fields) and for some records i get different results.
how is that possible?
(by the way looking at the records that has different hashes the values calculated by the hash function are the same)
thx

You have posted in the wrong forum. As the forum title says this forum is for SQL Developer and not for SQL or PL/SQL questions.
After reading the information provided at the end of this reply you should
1. create a new thread in the SQL and PL/SQL forum
PL/SQL
2. Edit this current question to add a link to the new question and tell people to follow up in the other forum.
3. Mark this current question ANSWERED so followup will be in the other forum.
Thanks.
When you post in the other forum provide information related to the following
>
for the comparisson of the data i'm using the ora_hash function (both on numeric and string fields) and for some records i get different results.
>
Please post your 4 digit Oracle versions - both versions (result of SELECT * FROM V$VERSION) and examples (i.e. actual code) of values that are giving different results.
>
(by the way looking at the records that has different hashes the values calculated by the hash function are the same)
>
What? there can't be 'different hashes' if the 'values calculated by the hash function' are the same. What are you saying here?
Again - provide examples that show the differences. Should be something like
SELECT ORA_HASH(12345) FROM DUAL;Since you say there are differences on the two machines provide the execution plan from each machine that shows what Oracle is actually doing. One machine may be applying a function to the data.

Several layered effects of the same kind but with different adjustments for the same layer

Hi,
I wonder if it there is an easy way to have several different instances of e.g. glow or bevel and emboss on the same layer.
I know I can achieve this by using smart objects or a duplicate layer with zero blending.
I just wondered if there is a way to do this directly in the layer effects.

Hi emil emil,
thx for your answer!
I wasn't even refering to different objects on the same layer, btw. it would be enough if I was able to layer e.g. different bevel and emboss on top of each other (With different colors, softness and size.) But I guess the answer remains the same.

Assigning a different mask for the same role

Similar Messages

Maybe you are looking for