Assigning a LOGICAL to a REAL var

Trying to port to solaris and I get this error:
xchem= .false.
---------^
"Fortran/dwfi.f", Line = 2800, Column = 12: ERROR: Info Assignment of a LOGICAL expression to a REAL variable is not allowed.
Can I just set xchem to 0?

That would be my guess. Without looking at the source and know what it does it's hard to say. If the variable (xchem) is used in arithmetic statements (not just conditional statements) then you have to set it to something and 0.0 is as good a guess as any.

Similar Messages

  • An SLD system has not been assigned to logical system TEC101

    Hello all
    We are trying to send an message RFC or IDOC from our SRM (5.0) system to the XI (7.0). But we allways get the error
    "An SLD system has not been assigned to logical system TEC101". In the SLD the system is visible, sldcheck works.
    Does anyone know this problem and can give me a hint how to fix this problem?
    Thanks a lot
    Stefan

    Hi Stefan,
    Is there a technical & Business System for SRM5.0 in SLD? If entry exists then confirm if the logical system name mentioned in Business System is TEC101.
    If entry does not exist in SLD for SRM, then in SRM run t-code
    1) SLDAPICUST .. Enter relevant details
    2) RZ70 : Give XI Server details , activate and then Execute.
    Once you do that you can see entry for SRM in SLD.
    After that try running the schenario again.
    Regards,
    Sumit

  • Check and assign a logical system to client

    Hi,
    How to check and assign a logical system to clients (for example client number 100)?
    Thanks & regards
    Duypm

    BD54- Create Logical system
    http://help.sap.com/saphelp_sm32/helpdata/en/69/c24ca94ba111d189750000e8322d00/content.htm
    This link also
    http://www.sap-img.com/bc059.htm
    Regards,
    Subhash
    Edited by: Subhash Chandra on May 14, 2009 10:21 PM

  • Assign a Logical System Name of a production client

    Hi everybody,
    We have an ERP system (now upgraded to ECC 6.0) that is in productive use since 7 years. Until now, no Logical System Name have been assigned to the production client - the field in transaction SCC4 is empty/blank.
    Now we plan to implement a BW, so a test and a productive BW systems have been installed. According to the attached file and content of note 184447 we choose to use "Option 1: Uniform Logical System names clients by system type" for naming convention for LSN's.
    All the systems/clients (BW test and productive, ERP test only) now are assigned with corresponding LSN's, except the production ERP client. It is still without LSN and the client is not defined as Source System for productive BW system.
    So, my question is:
    Should I expect any problems if the LSN of the production client is set up now, after long time, effective productive use?
    I would mention that this is infact initial setup, not a change of LSN. Therefore transaction BDLS is not relevant, I think.
    Thanks in advance

    Hi DB49,
    I already did an initial setup of LSN in the test ERP client (that client is copy of the productive ERP client, i.e. the LSN has not been set). And everything seems to be OK.
    But the documentation says that ".... In a production system, the logical system must not be changed ...".
    "Changed" is not "ïnitial setup" of course, so there will not be any problems I hope, but ...
    SCC4 --> LSN field --> F1 -->
    "System in which applications run integrated on a shared data basis.
    The distribution of data between systems requires that each system in the network has a unique identification. The logical system is used for this purpose.
    In the SAP System the client corresponds to a logical system. You can assign a logical system to a client in the client maintenance (choose Goto -> Detail).
    The logical system is relevant in the following SAP areas:
    ALE  general: two or more logical systems communicate with one another.
    ALE - ALE business processes (for example, cost center accounting): definition of a system where a specific application runs. Changes to master data can only be made in this system, for example.
    Workflow objects: the logical system in which the object is located is always included in an object's key.
    When maintaining the logical system, note the following:
    The logical system must be unique company-wide. It must not be used by any other system in the ALE integrated group. In a production system, the logical system must not be changed. If the logical system of a document reference is not set to initial and does not match your own, the system assumes the document is located in a different system."

  • Assignment of Logical Structures to Users

    Hi,
    I have a question regarding the assignment of logical structures to users of a database. The following is what Sam Alapati states in his book "Expert Oracle9i Database Administration:"
    "By organizing space into logical structures and assigning these logical entities to users of the database, Oracle databases achieve the logical separation of users (owners of the database objects, such as tables) of the database from the physical manifestations of the database in terms of data files and so forth."
    The question is what the unit of assignment is. Can a DBA assign an entire tablespace to a user, or is assignment done in units of segments? Please advise.
    Thanks,
    Karim

    The question is what the unit of assignment is. TABLESPACE. Each user has a default tablespace, where his objects (tables, indexes) go if not differently specified. The DBA can assign quota of other tablespaces to any user.
    Can a DBA assign an entire tablespace to a userNot directly, but the DBA can assign a quota (or unlimited quota) of a specific tablespace to a user only, and quota 0 to any other user, which practically means to assign the entire tablespace to that user.

  • Regarding "Error  An SLD system has not been assigned to logical system "

    Hi all,
    I am trying to connect SRM system to an XI system. All the settings are done (or I thought so). When I try to send a PO via XML/XI to the XI system in SRM Web UI, it gives me the following error:
    nformation  Processing BBP_PO_SEND_XML Is Started  
    Error  An SLD system has not been assigned to logical system  
    Error  Action could not be successfully executed 
    The backend systems are defined in spro. When I debugged the coding, I find that the right Logical system itself is not picked up - is there any thing missed out?
    Thanks,
    Vijay

    Hi,
    You should assign this here:
    Supplier Relationship Management -> SRM Server -> Technical Basic Settings -> Define Backend Systems.
    Here you should fill the "System Landscape Directory Name" for the systems you have defined.
    Regards
    Kathirvel

  • An SLD system has not been assigned to logical system

    Hi masters
    I trying send PO in XML to SUS through XI ,
    but when try to send the SRM/EB system show the next message
    Processing BBP_PO_SEND_XML Is Started
    An SLD system has not been assigned to logical system
    Action could not be successfully executed
    in XI system  I defined the SLD sistem for SRM/EB and SRM/SUS
    that SLD name  is settup into define system Landscape into colum System Land Directory Name
    in SLDCHECK all is Ok on green light.
    what can I do ?

    Hi. Nikhil.
    In SRM/EB
    1.- trying configurates SMXB_ADM 
    2.- Integratio Engine configration
    3.- Role of Business System    = Application System
    4.- Corresponding Integ. Server = dest://RFC  type H for XI system,
    problem .
    when I push bottom check (F7)
    the message is the next
    red light No access to system Landscape at present

  • Assign a logical system in RFC

    How to assign a logical system to a client in RFC?
    Regards,
    pandu.

    Hi,
    Use following
    Transaction code - SALE
    -> Node - Sending and Receiving System
              -> Logical System
                    -> Assign Client to Logical System.
    Enjoy SAP.
    Pankaj Singh.

  • Assigning of logical systems

    Hi Friends,
    Here we have IDES ECC DIMP 6.00, IDES NW BI,  and IDES SCM 5.0.
    My requirement is, need to connect IDES NW BI,  and IDES SCM 5.0. to IDES ECC DIMP 6.00.
    In IDES ECC DIMP 6.00 I have connected APO logical system. In clients setup we can assign only one
    logiacl ssytem.  Now how to connect the IDES NW BI logical sytem.
    If I am worng correct me and please participate in resolving this issue.
    Thanks in advance.
    Regards,
    Kumar

    I hope you have resolved this query at your end

  • Assign ECC logical component

    I have a problem to assign logical component to my ECC system in t-code SMSY.
    Every other system works fine...
    Please help me with some new things to try!

    1. I open the assign logical component wizard
    2. for my SAP ECC Server I browse for a logical component
    3. Then I select SAP ECC and press ok
    And then the error pop-up:
    Logical component SAP ECC cannot be assigned to this main instance.
    /Micke

  • BIA physical indexes with no assignment to logical index (InfoCube)

    Hi there.
    In RSDDBIAMON2 I can see the following warning: one BIA physical indexes is not assigned to any logical index. They explain it as the following: when a BI InfoProvider is deleted from the BI accelerator, some physical indexes of this kind of index join may not be fully deleted and may remain on the hard disk.
    Question: how to delete this physical index which is not assigned any more to any BIA index? If I even rebuild all BIA indexes this physical index may not be affected as I suppose.
    Have anybody had such kind of issues? Please advise.
    Thanks
    Vadim

    Zdravstvyite i vi Vitali
    It's exactly my question. Yes, I know the physical index name but unfortunately I cannot find the way to delete it not in TREXADMIN transaction, not in TREX Admin stand alone tool...
    Will try again if you think it's there
    Thanks,
    Vadim

  • BCF2000 - assigning within Logic Control Mode

    I am using a Behringer BCF2000 with Logic 7 Pro on a G4 powerbook. My BCF2000 is working fine in Logic Control Mode (USB Mode U-3), what I would like to do is add a few of my own parameters, mainly logic's tape delay feedback (as I make dub) to one of the dials, for example.
    Also I would love to be able to trigger a few sound effects (maybe an exs patch) using an assigned button, for those on-the-fly dub vibes.
    I sussed the patch editing and storing in the normal factory mode, but in Logic control mode, I can't seem to create my own patches and store them. Is this possible? and if so, how can I "learn" the functions like tape delay feedback.
    Any help would be greatly appreciated! Thanks guys!
    Ben (Brazil)

    I sussed the patch editing and storing in the normal
    factory mode, but in Logic control mode, I can't seem
    to create my own patches and store them. Is this
    possible? and if so, how can I "learn" the functions
    like tape delay feedback.
    Any help would be greatly appreciated! Thanks guys!
    Ben (Brazil)
    I have not been able to program mine in LC emulation
    though I have been able to program the other presets.
    Something I have not tried yet is trying to program the
    many parameters in the controller assignments window.
    I have discovered that by having the BCF in LCmode
    going to the Controller Assignments window and
    selecting expert and follow then clicking on
    the different modes and such that the BCF
    responds to what you are choosing on the screen.
    I have not had the time yet to confirm this but
    I believe the BCF is already preprogrammed to
    do many of these in LC emulation. For example when I choose
    track on screen the BCF would change its display
    to "tr" and so on. This is a big discovery for me since
    I new that in LCemulation the Unit was capable of
    accessing all or most of what a Mackie Logic Control
    unit could. I could never figure out how to get to those
    parameters. This is one way to figure it out I suppose.
    Behringer suggests that you read the docs for the Mackie,
    I have not found this to be too helpful yet. Hope this helps.

  • Is Kore 1 controller can learn assignement to logic pro 8  ?

    Hi! have a kore 1 controller with the native sofware 2.0.4 ... is it possible to have control on Logic pro 8 via midi learn with kore controller 1 (example: parameter: cut off in esp1 ...so that i can control the parameter with a knob from kore 1 controller?)
    I've tried several routings and many things but it looks like it is impossible?
    if someone can help me i'll be the happiest person on this planet!
    the question is...is it possible? thank you

    I don't know Kore 1 but it seems to be a normal Midi Controller so go ahead as follows:
    1.) Choose the parameter on the track you want to automate located in the track header's automation menue
    2.) Open Logic's Automation menue->Quick access and hit the Midi Learn button->move the knob that you want to assign tho the chosen parameter->then hit ok
    3.) Set the track into Latch/touch mode hit play and record your Automation

  • Regarding assignment under logic

    hi
      what is the use of assignment in logic

    You can also test using:
    http://<yourserver>/Lighthammer/Runner?Transaction=XXX/YYY&YourInput=123&OutputParameter=YourOutput
    Sometimes this is better and easier than using the Xacute query editor.
    Also, it is good practice to provide a "reference document" (using the Assign Reference Document menu option in the BLS editor) to XML inputs and outputs.
    This helps in two main areas:
    - If you invoke your transaction from another transaction, you'll be able to map into and out of the transaction input and output structure(s)
    - If you invoke your transaction as a SOAP web service (using WSDLGen), it will generate the proper WSDL
    Best regards,
    Rick

  • Recording Audio For Timeline With Logic Pro In Real Time

    I do commentaries on videos and was wondering if there is an easier way than what im doing now..
    Right now I export my video from premiere to a bad quality version and import it into logic pro and record the commentary there.
    Then I have to bounce the audio and import it back to premiere.
    Is there a way to get the same plugins that are in logic pro to be used in premieres audio mixer??
    A dream come true would be that I could just record directly into premiere with all of the effects coming from logic pro.
    Anyone know of any kind of solution or trick or anything so I dont have to keep going back and forth and to make this easier???
    Thanks for any info I really appreciate it!!

    I just hate going back and forth from premiere and logic and all the extra time wasted exporting the files so they will work with eachother.  
    I just thought of something else.... Is there a way that I can get the video in premiere to play the same time I push record in logic pro and maybe sync with it?
    Like if I push record in logic the video in premiere will start playing then when I push stop in logic pro it will stop in premiere or at least stay in sync with it so the timing will be right?
    if anyone has any ideas throw some out there I would love to hear them.
    Thanks!

Maybe you are looking for