Regarding "Error  An SLD system has not been assigned to logical system "

Hi all,
I am trying to connect SRM system to an XI system. All the settings are done (or I thought so). When I try to send a PO via XML/XI to the XI system in SRM Web UI, it gives me the following error:
nformation  Processing BBP_PO_SEND_XML Is Started  
Error  An SLD system has not been assigned to logical system  
Error  Action could not be successfully executed 
The backend systems are defined in spro. When I debugged the coding, I find that the right Logical system itself is not picked up - is there any thing missed out?
Thanks,
Vijay

Hi,
You should assign this here:
Supplier Relationship Management -> SRM Server -> Technical Basic Settings -> Define Backend Systems.
Here you should fill the "System Landscape Directory Name" for the systems you have defined.
Regards
Kathirvel

Similar Messages

  • An SLD system has not been assigned to logical system TEC101

    Hello all
    We are trying to send an message RFC or IDOC from our SRM (5.0) system to the XI (7.0). But we allways get the error
    "An SLD system has not been assigned to logical system TEC101". In the SLD the system is visible, sldcheck works.
    Does anyone know this problem and can give me a hint how to fix this problem?
    Thanks a lot
    Stefan

    Hi Stefan,
    Is there a technical & Business System for SRM5.0 in SLD? If entry exists then confirm if the logical system name mentioned in Business System is TEC101.
    If entry does not exist in SLD for SRM, then in SRM run t-code
    1) SLDAPICUST .. Enter relevant details
    2) RZ70 : Give XI Server details , activate and then Execute.
    Once you do that you can see entry for SRM in SLD.
    After that try running the schenario again.
    Regards,
    Sumit

  • An SLD system has not been assigned to logical system

    Hi masters
    I trying send PO in XML to SUS through XI ,
    but when try to send the SRM/EB system show the next message
    Processing BBP_PO_SEND_XML Is Started
    An SLD system has not been assigned to logical system
    Action could not be successfully executed
    in XI system  I defined the SLD sistem for SRM/EB and SRM/SUS
    that SLD name  is settup into define system Landscape into colum System Land Directory Name
    in SLDCHECK all is Ok on green light.
    what can I do ?

    Hi. Nikhil.
    In SRM/EB
    1.- trying configurates SMXB_ADM 
    2.- Integratio Engine configration
    3.- Role of Business System    = Application System
    4.- Corresponding Integ. Server = dest://RFC  type H for XI system,
    problem .
    when I push bottom check (F7)
    the message is the next
    red light No access to system Landscape at present

  • SLD system has not been assigned ? :-(

    Hi Guys,
    This is an easy question for SRM gurus =)
    I need to send the PO in format XML to the vendors (using XI).    When I try to send a PO I can see this error message in "Issue Purchase Order" option menu.
    Information  Date: 13.06.2006 Time: 10:19:38  
    Information  Processing BBP_PO_SEND_XML Is Started  
    Error  An SLD system has not been assigned to logical system SRDCLNT120  
    Error  Action could not be successfully executed 
    Could anybody give me any help about this ?  I have searched in sdn and oss without success =(
    Thanks for your help !
    Regards,
    Diego

    Hi Christophe, my feedback:
    A) In "Define backend system", I entered the XI alias name defined in tx: SLDAPICUST
    B) Now the process doesnt throw any error in SRM, but the PO document is not arriving to XI neither =(
    My questions are:
    1. Should I put that alias in that field ?   Or should I put the SLD server name?   Should be an RFC conn name to XI?
    2. Should I do anything additional to point 1?  For example: in tx. SLBBP_RFCDEST the PO scenario is directed to "BBP_XML_PO".    Should I made a change on this ?
    Thanks for your help !
    Best regrads,
    Diego

  • GL account has not been assigned for PLAAED in customization

    Dear Guru's,
    When i enter into the Transaction code J2IUN, system is giving following error message-
    GL account has not been assigned for PLAAED in customization
        Message no. 8I447
    Diagnosis
         GL account has not been assigned for the excise a/c in customization
    Procedure
         Assign GL a/c for the excise a/c in CIN customization under :
        Accounting ->  Assign GL accounts to excise groups and
        transaction types
    Please guide me to resolve this problem.
    Regards,
    Vs

    In the description of the error itself
    Procedure
    Assign GL a/c for the excise a/c in CIN customization under :
    Accounting -> Assign GL accounts to excise groups and
    transaction types
    you could find the solution.
    Under CIN customization Logistics-General => Accounting => Assign GL accounts to excise groups and transaction types.  There check whether you have assigned the required G/L Account to your excise group.
    thanks
    G. Lakshmipathi

  • GL account has not been assigned for CLEAR in customization

    Dear Guru's,
    When i enter into the Transaction code J2IUN, system is giving following error message-
    "GL account has not been assigned for CLEAR in customization"
    If it could have been Excise or AED or BED etc. then i could have assigned the GL to these in account determination -> Assign Gl account
    But i m not able to understand this CLEAR account.
    Please guide me to resolve this problem.
    Regards,
    Devanshu Gaur

    Chek if the GL Accounts are open item managed? Ideally all tax accounts should be open item line item managed
    Regards
    Sanil

  • SLD server has not been started & Only local system can be administered

    Hi
    After I installed the NWA sp16, I see two warning message
    SLD server has not been started
    Only local system can be administered
    on the NWA Overview page.
    I checked the SLD server is running, and I executed all the NWA scenario template files without any errors.
    Can someone tell me what I might have missed?
    Thanks
    Justin

    Hi Justin,
    do you have the most topical Monitoring Setup Guide (https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f30e51-0a01-0010-f59a-fecea2b95b2c)? In chapter 5.6 this error is descibed.
    And another thing: does your SLD run in the central monitoring system, as demanded in the Monitoring Setup Guide, chapter 5.3.1? This CTC template does only work in case of a local SLD.
    Hope that helps.
    Dirk

  • Error Message "This Item has not been purchased"

    I just bought a brand new computer with Windows 7 and I just downloaded Itunes.  I couldn't remember my itunes password so I changed my password.  After changing my password, I changed my Email address since I was using an old one I don't have access to anymore.  After doing that I started trying to get my old purchases put on my new computer and maybe 40 songs downloaded before I got an error saying "This item has not been purchased with your Apple ID".  These songs are listed in my purchased list, I bought them on my old computer and Itunes isn't letting me download nearly 300 songs that I paid for.
    How do I fix this?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
    SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Error while MIRO posting: Unique co code has not been assigned to co number

    Hi all
    I am getting the following error while posting MIRO-
    "A unique co code has not been assigned to co no". I think this might have to do something with CO no range. Is it so. Does any1 have any idea what this could be because of?
    Thxs in advance
    Hrishi

    Hi Vishnu
    Thxs for ur immediate reply. But cross co conttrolling is not active in my case. The error diagnosis reads as follows-
    Doc breakdown is active in ur system. In certain cases, a co code is derieved frm the Co ID no and this must lead to the assignment of a unique co code.
    A unique co code could not be assigned to Co no.
    Message No GLT0001

  • Logical system name has not been assigned to

    Hi, Expert
    I m trying to transferr DATA from ECC to APO . when I configured my ECC and APO systems according the SCM 210, but I still meet the error like this
    logical system name has not been assigned to
    syste: user:
    Function/Q/SAPAPO/CIF_PRODUCT_INBOUND
    text: logical system name has not been assigned to
    my ECC is ECC6.0,and APO 7.0
    Can u help me,Thank u. I m waiting the solution on desk
    Rockey
    Edited by: Xinyou Dong on Jun 2, 2011 9:11 AM

    Hi,
    I think you dont have partner profile created.
    Try to create one with the RFC which is connecting ECC and APO.
    Thanks,
    Deepthi

  • Logical system has not been assigned to any business grp

    We have converted R/3 system (4.6c) from EBCDIC to ASCII. R/3 is integrated with SCM 5.0. Everything was fine before conversion. After Conversion, in SCM qRFC Monitor Inbound Queue (TCODE = SMQ2), we are getting the
    error "Logical system &##ä<+è### has not been assigned to any business
    system gr".
    Error Message no. SR053
    The problem happens because the logical system has strange value
    in the inbound queues.
    Preblem still persists even after performing various things:
    Re-created and Activated the CIF Integration Models
    Checked all settings in both systems
    Ran CCR
    Checked table CIFLOOKU
    Any ideas are highly appreciated? Thanks

    thanks。 I have the same issues. like this:
    Logical system I11CLNT800 has not been assigned to any business system group
    Message no. /SAPAPO/CIF007
    System Response
    The data cannot be assigned to a logical system.
    Procedure
    Check if the logical system has been maintained, and assign the logical system to the business system group.
    the  I11CLNT800  is my ECC logic system. I had assigned it to ECC Client 800,and  a BSG I11800 in APO system.
    Can u give me any suggestions?
    before, someone had suggested me to define partner profile in WE20 and WE21, but they does not work.
    waiting on desk
    thanks
    Edited by: Xinyou Dong on Jun 3, 2011 1:01 PM

  • Error - GL account has not been assigned for CLEAR in customization

    Hi
    We are working on ECC 6.0.
    When we try to create Excise Invoice through J1IS for Ref doc Type MATD for Material Doc of 122 Movement Type we are getting the following error -  "GL account has not been assigned for CLEAR in customisation"
    Can anyone help that for which Excise Transaction Type (ETT), the GL account has to be assigned under GL Accounts per Excise Transaction.
    Regards
    Kapil

    Hi,
    Maintain the ETT for CIEV - CANCELLATION OF EXCISE INVOICE in following customizing
    IMG > Logistics - General > Tax on Goods Movements > India > Account Determination > Specify G/L Accounts per Excise Transaction
    Regards,
    Jigar

  • Error message saying "iTunes has not been correctly localized for this language"

    When trying to launch iTunes I'm getting an error message saying "iTunes has not been correctly localized for this language.  Please run the English version"?  Any suggestions are much appreciated and thank you in advance!

    Let's try a repair install of iTunes.
    Restart the PC first.
    If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
    If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
    Can you launch your iTunes now?

  • HELP - Receiving error message "The file has not been processed. An error has occurred which stopped the processing of the PDF"

    Have been using Adobe CreatePDF for many months successfully.
    Only recently over the past few days I have been experiencing errors for periods between 3-5 hours on every attempt to convert/combine files. The error reads: "The file has not been processed. An error has occurred which stopped the processing of the PDF"
    It will stay like this and no amount of refreshing the cache, logging in and out will help. I'm running Firefox 34.0.5, windows 7 64bit. Only solution I've found is to wait until the next day and it seems to be working again. Only explanation i can think of is some unexplained maintenance adobe is running behind the scenes because I'm often working late between 12am - 4am.
    When this problem happens, no file types will convert/combine I've tested JPEG, PDF and word docs to PDF.
    I log in and out of my account, I've cleared my cache, I'm using Firefox 34.0.5 which has always worked in the past I just don't understand how this error is happening for such long periods. Starting to reconsider this product when there are free alternatives to simply combine my PDF docs! please help.
    Tom.

    I am still experiencing this problem. Customer service from Adobe has been abysmal!
    I called Adobe tech support at 2am Australian time ( >1 weeks ago) and got onto a help centre in India. I was walked through all the troubleshooting steps and they remotely accessed my PC and confirmed that It was not my PC that was at fault. They reset my password and dialed into my adobe account from their end to attempt a simple conversion and export to PDF which failed. I was told that this problem is not something they can fix, and is a result of something on the back end of their software.
    They advised me that the problem would be passed to a fixed within 12 hours and they would call and email me to confirm everything was OK. I gave my phone number with (area and country code) my email but have not had any communication back.
    I am extremely dissatisfied, and just want this software to function. Is that too much to ask?
    Note: This problem is happening always now, regardless of time being used.
    Tom

  • How to tackle the error - " The Lead Selection has not been set in view "?

    Hi Guys,
    I'm getting this error " The Lead Selection has not been set in view " . If any one has faced the same problem , then please guide me . I am new to WD ABAP so finding it difficult to track the reason.
    TIA,
    Vishesh

    Hi Pradeep,
    I have already checked  "Initialisation Lead Selection" property . I have faced the same problem in another view also there it got solved by changing the cardinality.  In this case, I had tried both cardinality and Lead selection property  but nothing  is working.
    Thanx.

Maybe you are looking for