Assigning shortcut to "Rename Clip" function?

Hey
Do you know how to assign a shortcut to the "Rename Clip" function? Not in the Event Browser, but when I have my footage on the Timeline, I would like to rename it to its specific function - which is possible by right clicking and choosing "Rename Clip" - but it would be a lot nicer, if I could assign a shortcut command to this.
But when I go to Final Cut Pro -> Commands -> Customize and open the Shortcut Customizer window, I am not able to find "Rename Clip" - which means I can't assign a keyboard shortcut to it... Do anyone know what to do?

Nope, it is not an available command to customize. Would be nice, though.

Similar Messages

Assign Keyboard Shortcut to Various Align Functions

What's the process of creating a keyboard shortcut to the various align functions?
In prev vers AI allowed me to assign shortcuts to each of the below.

i don't remember previous versions allowing for this. what version was that?
you currently can't assign shortcuts to those directly. my workaround was to save actions for each one and assign shortcuts to the actions (you can only assign function keys via the actions menu). it's not ideal but that's what i use.
you can also replicate the same functions with scripts and assign shortcuts to those scripts via fastscripts or sparks or other similar program. sparks is free.
hope that helps.

Dreamweaver 8, layer clip function doesn't work

Hi folks
I am doing a distance learning college course in Dreamweaver
at the moment and I am using Dreamweaver 8.
One of my assignments is trying to show me how to use layers.
The assignment tells me to create a layer and insert an image in to
it. Then I am to use the clip function on the layer property
inspector to clip the image until only the centre portion is
visible. I can do this no problem and the image clips while on the
design screen leaving a white border around the centre visible
portion as you would expect, however when I preview the page in a
browser the whole image is visible rather than the clipped portion.
What am I doing wrong or is this a known issue?
Many thanks
Graham

Anybody?

1.Assign shortcuts to scripts 2. Actions remember insert menu commands when app is started

It been ask before... Many times. There is probably a current request right now. It will be asked again... And again... And again... Under keyboard shortcuts, allow scripts to assigned a shortcut. Also have actions remember insert menu commands when the application is restarted. Was patiently waiting years ago... Now I am starting to grit my teeth. When my dentist lectures me over grinding my teeth, she will not be as forgiving as I have been over the years. It is time to set a small portion of available resources to fix and add functionality to this.

OK, so at least we have one solution "with shortcut for script problem":
1. Put "script.jsx" into folder Mac OS X > Applications/Adobe Illustrator {version}/Presets/{Lang}/Scripts
2. Make Action, "insert menu item" in it -> select "File\Scripts\script.jsx"
3. Assign shortcut to this action. PROFIT
But! The problem is: Illustrator "forgets" about menu item in action after restart.
Therefore you can use script shortcut only one time per "session", and every time starting we need to make "insert menu item".
Well, this is the second part of topic question, I guess. And I don't have solution. This is what I got:
0. If you have several scripts with shortcuts, everyday inserting all scripts in actions is boring. Make a folder for this actions. And "Save actions" it to ".aia"
1. Every time starting Illustrator — Delete folder with your special "scripts-actions" (because it's actions is emptied!)
2. Then go to "File>Scripts>...". Now just gently stroke your scripts with cursor. Like a kitty. Ahahaha! )) It is not a joke!!! Do not start the scripts, just enter to its' submenu.
3. Now "Load actions" from your .aia. Have a nice automated session with your magic scripts! This works for me. If you have daily work routine and 5-10 scripts, this is the best solution.
* If you skip step 2, you will get "Some event has not been registered for actions"! And empty action. If first you will stroke the kitty, you will get your magic shortcuts after "Loading actions"! As I told, this not a joke, but strange Illustrator behavior.
* If you did not delete previous folder (step 1), you'll get 2 folders with actions, old one — without scripts, new one — without assigned shortcuts. And nothing works. Delete all and reload.
* One more thing. I have Scriptographer Extension. This extension manages scripts (js) and has "scriptographer palette". In this palette I found shortcuts, to execute selected script and etc. So, in theory it is possible to rebuild this extension with shortcuts for some scripts. Maybe we should dig in that direction? I'm too stupid for this.

How to assign the output of a function to a text area: a PLSQL challenge

I have a function that returns a PLSQL table of varchar4(4000)
Here is its signature in a package:
create or replace package researcher_request_pk
is
TYPE query_table_type is table of varchar2(4000) index by binary_integer;
FUNCTION RequestSQL(P_RRQ_ID in number) return query_table_type;
end;
I use this to get around the 32k limit on clobs and varchar2 variables
I want to assign the output of the function to a text area. I've tried the following PLSQL in a dynamic action and also as the source attribute of the Text Area but it doesn't populate the text area.
Here is the code i'm using
declare
v_table researcher_request_pk.query_table_type;
begin
v_table:=researcher_request_pk.RequestSQL(:P64_RRQ_ID);
for i in 1..v_table.count loop
htp.prn(v_table(i));
end loop;
end;
Any ideas on the correct syntax to do this?
thanks in advance
PaulP

Thanks for your reply
The function does populate the PLSQL table with data. e.g. If I place that exact code in a PLSQL region it generates the output on the screen with no problems. The problem is just generating the output into the text area.
I want the text area to display the output of the PLSQL table (-a dynamic select SQL statement) which I then plan to execute to return records.( i.e. I've build my own runtime query builder)
My plan is to allow the user to edit the SQL output first before sending the statement for execution.
Funnily enough I do get the very first word of the first cell appearing, namely 'SELECT' but nothing else. Maybe the "||" that follows has something to do with the rest of it not appearing?? hmmm... will experiment more.
thanks
PaulP

Moving and renaming clips in the Project Window is EXTREMELY slow, but the rest of the program is fine?! PPro CS6

I have Win7 Pro X64 with Core i7 and 32GB RAM...
When I'm editing and doing other things, adding FX etc, the program works fine BUT when I do ANYTHING in the Program Window i.e. renaming clips, moving clips, etc the program acts as if it's bogged down... I can't for the life of me figure this one out...
I don't have a large number of clips/footage items
I've cleaned the cache
What else could be causing this? When I say slow, I mean a good 10 seconds before the program responds to anything I've done, and when renaming clips, I always have to do it twice because the first time it doesn't "take"
Thanks all for any help!
Aza

It occurs with or without clips in a sequence... the problem isn't the sequences, the problem ONLY occurs in the Project Panel, every other panel is as fast as my machine will allow (very fast) only the PROJECT Panel is EXTREMELY slow when moving clips into folders, etc
ALSO, all my drives and preferences are set up the same in every project, only THIS project is moving slowly... I even divided the project up into 4 separate projects to cut down on the number of clips in each project, and it still moves slow... almost as if something has carried over to each project, or something

Assignment of filter to planning function in integrated planning

Dear experts
I am a bit new in Integrated planning and have a following conceptual question regarding filter object in IP
In IP it seems that filter is a substitute object for planning package in BSP.
I however do not see any possibility to assign filter to a planning function except in a planning sequence. I would however imagine to have a functionality to dynamically select the filter when i want to execute a planning function via application (excel based or Web).
It seems that filter is not even required if a planning function is executed seperately (not as part of planning sequence).
I have tried to execute a simple copy function without having any filter at all and it works.
Could someone pls. explain me as to the conceptual difference between object filter and object planning package.

Hi,
Filter is indeed used in IP similar to how planning package was used in BPS. There really is no difference 'conceptually'.
What you have seen is the different options IP offers compared to BPS regarding planning function execution. You can execute planning function directly or using a planning sequence in an application (although in planning modeler, its only a planning sequence that can be executed, for eg., for testing purpose).
If you just execute a planning function without specifying any restriction, it will operate on the entire set of planning data. Whether its a planning sequence or planning function, the data it operates on can be restricted by binding the various characteristics (or variables) using various DPs in the application. What kind of dynamic selection are you looking at?
You can see following links if you have not read them already -
http://help.sap.com/saphelp_nw70/helpdata/en/43/f0f8dc73b56bede10000000a11466f/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/44/33a31fd463060ce10000000a155369/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/43/f0f92373b56bede10000000a11466f/content.htm
These are for WAD; you can find similar links for the BI Analyser.

Renaming a function in a function group

Hi,
I'm trying to rename a function in a function group, and I keep getting
Object components locked in request and separate task
It was decided the Function group should be called a different name, and so I copied the function group, and then copied all the functions with a new name.
Now in the original Function Group I want to rename the functions, so I can use the correct names in the new function group - or is there a faster way of renaming a function group?
Thanks

You are not able to rename original function group / modules because they are also locked in another task of same transport.
Goto SE09, give the transport no and see the details of transport.
There must be multiple tasks - may be some other developers are using same transport.
So you need to change task owner to your id and then rename fm . function group.
Pls make sure that you are not disturbing other developer's development as you all are sharing the transport.

Using the Clip function of an AP-Element

This is a follow up question to my previous post asking about
opening external links within my site.
After taking some good advice on embedding the image in an
HTML doc on my site and then calling this page from the navigation
bar.......I'm now on the trail of embedding the image in an
AP-Element so I can then do my RHS or LHS justification using the
clip function. In principle I've had it working once on my exisitng
home page, but as soon as I try creating a new Doc and embedding
the AP-element the clipping fails to work. If I clip the LH corner
of the image it diplays correctly in the designer window, but as
soon as I go to the browser preview it reverts back to an unclipped
version of the image.
This is what I'm doing:-
1) I create a blank new document
2) I then add an AP Element by Insert|Layout Object|AP Div
3) I then resize this to a reasonable size on the page and
then insert an image
4) I then click on the AP-element border and go to the Clip
property and set up to clip the LH corner of the image
When I then look at the designer window, it correctly shows
the clipped LH corner as expected. But as soon as I preview it in
the browser it reverts back to the full size image.
Any guidance would be most greatfully received.
Thanks,
Neil

Tell us again why you are clipping the image, please?
Also, AP elements cannot interact with any other elements on
the page
because the fact that they are absolutely positioned removes
them from the
normal flow. So, if you are seeing movement that you
interpret in this way,
you are not interpreting it correctly - most likely you have
other issues on
the page. Finally, editable regions are NOT layout regions -
they are
content regions. If you are seeing 'editable region' issues,
then look to
your page's code and the HTML infrastructure there, not at
your template
region markup.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"CS4Rookie" <[email protected]> wrote in
message
news:gqnrea$1d$[email protected]..
> Ok, I have part of the site running now so you can see
what stage I'm at.
>
> I think the AP element clipping works ok for what I'm
doing, but it does
> pose
> problems with a large clipped image as I need to select
a different
> clipping
> area for each side of the image. When I do this I then
need to move the AP
> elemnt around in the page and this seems to create
editable region issues
> due
> to it being a wide image.
> Again, this is probably due to my inexperience, so I
guess I'll sort it
> out if
> I put enough time in.
>
> Thanks for your comments and support so far.
>
> Neil
>

Assign shortcuts to sound item

Hi
I'm using Oracle Forms 6i.
And I would like to know if it's possible to assign shortcuts to play/rec/stop/(...) buttons in the sound item.
What I really want to use is a speechmike control to control those buttons.
If it's possible, how can I do it?
Thanks.
Ownr

Create a link to your form and use this link.If the link is from a report to form in the 'Edit Link' you can give neither static nor dynamic value to a form item

Insert and overwrite keyboard shortcuts making unlinked clips.

I recently switched from Mac to Windows; on the Mac, the insert/overwrite shortcuts would put the clip in the timeline as a linked clip (so the audio and video were considered a single clip). However, after switching to Windows, I've noticed that those shortcuts put the clip in the timeline unlinked, and I don't know how to change that. I'm really hoping to fix it, as it significantly slows down my editing. Thanks.

Hi Jacob,
Click the Linked Selection button. You should be OK after that.
Thanks,
Kevin

Rename the function group

hi...
How to rename the function group name????
I tried with... copy option.... but its asking for function modules of that function group name change...
I dont want to change the names of function modules..
Thanks,
Naveen.I

Naveen,
Goto SE38 --> Enter the program name as SAPL(Function Group Name) e.g. if FG name is TEST then enter Program as SAPLTEST. In the application toolbar, there will be an option Rename. Click on that na dprovide the new name. Press Enter and activate.
Every Function Group has a main program associated with it which contains the TOP Include and the UXX include. UXX include contains the includes. Each include here corresponds to a function module.,
To see the main program, what u can do is goto SE37 --> Goto --> Function Group --> Display Group.
Put the group name here and then press the button Main Program on the popup that comes.
Hence, I am talking of this main program which if u will rename, will automatically rename the Function group.
Hope it helps.
Amit.

Assigning of process code to function module

hi all,
please let me know where to go for assigning teh process code to function module. i am unable to get the function module from the process code(we42). please let me know
thank you
chan

In WE42 itself we can assign the process code to a FM.
select new entries.
Enter a process code name & description.
Enter Ur FM in Identification Field.
Now select Processing by Function module in Processing type.
Save it.
For outbound do the same thing in WE41 tcode

Keyboard shortcut to rename files in Finder

Hi,
How can I create a keyboard shortcut to rename files in Finder, preferrably "F2"?
I know I can click on the filename twice in Finder with a short delay and then I can rename it - but that's a drag if you have to rename a lot of files....
I'm also aware of the possibility to create shortcuts in
System Preferences -> Keyboard & Mouse -> Keyboard Shortcuts
...just can't figure out how to create the shortcut I need
Thanks,
Koinseb

Select a file and press return to edit the name without the delay.
You might look at A Better Finder Rename if you have many files to rename:
http://www.publicspace.net/ABetterFinderRename/
hth,
b.

Firefox deleted my Evernote clipping function, how do I get it back?

Firefox sent a message that the browser was working slowly and so I ran the fix. Now my Evernote clipping function is gone and I don't know how to get it back.

If you need to recover data from the old profile then you can find that on the desktop in the "Old Firefox Data" folder.
When you reset Firefox then a new profile is created and some personal data (bookmarks, history, cookies, passwords, form data) is automatically imported and the current profile folder will be moved to the desktop to an "Old Firefox Data" folder.
Installed extensions and other customizations (toolbars, prefs) that you have made are lost and need to be redone.
It is possible to recover data from the old profile, but be cautious not to copy corrupted files to avoid carrying over problems.
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Assigning shortcut to "Rename Clip" function?

Similar Messages

Maybe you are looking for