Assigning value to variable defined as LOCAL in standard program

Hello Gurus,
We have a Z function module which gets called via standrad SAP program. Now inside this Z FM we have to code such that it updates an internal table defined via LOCAL in program LQEEMF72 (Main program SAPLQEEM). Is this possible ?
I tried following :
DATA gt_qasptab TYPE qaspr OCCURS 0.
FIELD-SYMBOLS: <qasptab>.
ASSIGN ('(SAPLQEEM)QASPTAB[]') TO <qasptab>.
gt_qasptab[] = <qasptab>.
and at the end
ASSIGN gt_qasptab[] TO <qasptab>.
This does not work. How to update the table QASPTAB ?
Please provide your suggestions ....
Thanks in advance <REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Dec 28, 2007 8:26 AM

Hi tushar,
I'm very sorry I can't reallly help you if you don't describe your process at all.
The include you mentioned is not part of an SAP program but a FORMS include of a SAP function group.
In this function group QEEM SAP provides lots of userexits:
EXIT_SAPLQEEM_001 Customer Function for Calculating Formulas in Results Recording
EXIT_SAPLQEEM_002 Customer Function: Add. Fns for Importing Insp. Chars in Results Recording
EXIT_SAPLQEEM_003 Customer Function: Add. Functions After Valuating Insp. Characteristics
EXIT_SAPLQEEM_004 Customer Function: Add. Functions After Valuating Partial Samples
EXIT_SAPLQEEM_006 Customer Function: Add. Functions After Closing Insp. Characteristics
EXIT_SAPLQEEM_007 Customer Exit: Additional Functions After Closing Partial Samples
EXIT_SAPLQEEM_011 Customer Function: Add. Functions Before Valuating Insp. Characteristics
EXIT_SAPLQEEM_012 Customer Function: Additional Functions Before Valuating Partial Samples
EXIT_SAPLQEEM_015 Customer Function: Add. Functions After Entering Individual Results
EXIT_SAPLQEEM_020 Customer Function: Additional Functions After Entering Inspector
EXIT_SAPLQEEM_021 Customer Function: Add. Functions for User Key +US1 (Char. Single Screen)
EXIT_SAPLQEEM_022 Customer Function: Add. Functions for User Key +US2 (Char. Single Screen)
EXIT_SAPLQEEM_023 Customer Function: Add. Functions for User Key +US3 (Char. Single Screen)
EXIT_SAPLQEEM_024 Customer Function: Add. Functions for User Key +US4 (Char. Single Screen)
EXIT_SAPLQEEM_025 Customer Function: Add. Functions for User Key +US1 as Pushbutton
EXIT_SAPLQEEM_026 Customer Function: Add. Functions for User Key +US2 as Pushbutton
EXIT_SAPLQEEM_027 Customer Function: Add. Functions for User Key +US3 as Pushbutton
EXIT_SAPLQEEM_028 Customer Function: Add. Functions for User Key +US4 as Pushbutton
EXIT_SAPLQEEM_029 Customer-Function for Subscreen Characteristic Overview
EXIT_SAPLQEEM_030 Customer Function for Subscreen Characteristic Single Screen
EXIT_SAPLQEEM_031 Customer Function Creating Table with External Numbers
EXIT_SAPLQEEM_032 Customer Function Characteristic Text in Logon Language
Try one of them.
Regards,
Clemens

Similar Messages

Assign search help for a screen field in standard program?

Hi All,
Is there any other way to assign search help to a standard SAP screen field? (to be precise i want to assign search help to Recipient field in table control of components tab in transaction IW32/IW31)
I know we can do this by assigning search help through screen painter (by changing standard program, which is my last option).
Any advice/help will be greatly appreciated.

Hi,
I think you will find solution in below <b>threads</b>:
Re: Search Help for standard field
How to assign a search help
Search help for Standard SAP field
<b>Reward if helpful</b>
Rgds,

Assigning Value to Variable in Sapscript

Hi,
To initialized value of the variable when I tried to assign 0 to variable (like in the following statement) it comes up with error 'Command Expected'.
&RF140-ZALBT&= '0'.
Please let me know where and what I am doing wrong in assigning value to a variable?
Regards,
Shabbar

Hi,
Still its not working. The statement I am writing is
/: &NET& = &RF140-WRSHB& - &RF140-MSATZ&
but the system gives error on that.
NET is the local variable declared with Define statement and both the others are defined in print program.
Even I tried
/: &RF140-ZALBT& = &RF140-WRSHB& - &RF140-MSATZ&
but still the same error.
Any comments?
Regards,
Shabbar

Assigning value to variable in ODI

Hi
TotalCount(datatype is numeric)--->Action is (Latest value)
And i want to assign value it by using following query
select count(*) from Investment_ato
i am writing this in a refresh tab
And i am using this variable in another variable(var_account)
but value of TotalCount variable is not coming in var_account
so plz suggest regards the same
thanks

You can set the refreshing mode in the variable var_account and in the refreshing tab put the query as: select #TotalCount from dual.
Hope it helps!

Assigning value to variable of type time

Hi,
I want to assign value '8:00:00' to a time variable (w_time like sy-uzeit).
How do i do this? Do i need to do any casting?
w_time = '8:00:00' didnt work.
I am trying to use this in a customer exit.
Thanks,
Arun KK

Gotcha!
Thanks!!

Define and assign values to variables in calc manager

Hi all,
I have created a smartlist in data form for user to select the start month and end month.In BR,based on the smartlist ID,i need to assign the months to a variable,which i will later use it in the same BR.
For Eg:In data form,from the smartlists,user has choosen "Jul" for start month and "Nov" for end month,hence the smartlist ID is 7 for start month and 11 for end month.Now in calc manager,i have created 2 variables as "DateFrom" and "DateTo" of type "member" for dimension "Period"
Note: "Jan" to "Dec" are period dim level 0 members
IF(start month==1)
DateFrom="Jan";
ELSEIF(startmonth==2)
DateFrom="Feb";
ELSEIF(start month==7)
DateFrom="Jul";
ELSE
DateFrom="Dec";
ENDIF;
Similarly for end month as below:
IF(end month==1)
DateTo="Jan";
ELSEIF(end month==11)
DateTo="Nov";
ELSE
DateTo="Dec";
ENDIF;
Above method of assigning a value to a variable is not working and no values assigned to the 2 variables "DateFrom" and "DateTo"
Kindly help me on any additional steps required to use variables in calc manager.
Thanks!

Cant you use the values from RTP directly? What is the logic you are trying to build?
One of the ways to achieve this is to use Calc TP Index member, if you are not sure of this, create a workforce application and you will get the formula for calc TP index member in Essbase.
Edited: I just checked other question from you, will revert on that in some time.
Cheers..!!
Rahul S.

Excluding a fixed value with variable defined

Hi
In Bex report , a variable is defined already.
Now the requirement is to exclude (FIXED VALUE) i.e batch with value #.
if using the restrict option of this charactersitic, i am not able to select both fixed value(which is to be excluded) and the variable (already defined) simultaneously.
Message is coming as variable is complex...so cannot select both FIXED VALUE and FIXED VALUE)
Please suggest a solution
Regards
DJ
Message was edited by:
Vidyut Kichambare

Vidyut,
It seems to work fine for me - select the variable you want and also the fixed value you want to exclude and it should work fine.
select the variable and then go to the fixed values tab and select the value you want to exclude and select it and do an exclude on the same - ideally when you select a value using a variable - the # would get automatically excluded - not sure why you want to exclude # along with the variable.
Arun
Assign points if useful

Read XML in BPEL and assign values to variables

Hello,
I need to read an xml message in BPEL and assign variables created in BPEL the values of elements in XML message. Whats the best possible way to do this.

When you say"*read an xml message*", is the xml coming as input message or you need to read from file ?
If you want to read from file, you can make use of the below function.
Returns the string value of an element defined by lookupXPath in a XML file (docURL) given its parent XPath (parentXPath), the key XPath (keyXPath) and the value of the key (key). Usage: oraext:lookup-xml(docURL as string, parentXPath as string, keyXPath as string, lookupXPath as string, key as string)
Example: oraext:lookup-xml('file:/d:/country_data.xml', '/Countries/Country', 'Abbreviation', 'FullName', 'UK') returns the value of the element FullName child of /Countries/Country where Abbreviation = 'UK' in the file d:\country_data.xml
Thanks,
Vijay

Any way to assign value for variable of type Class List String ?

I'm puzzled why I can declare a variable:
Class<List<String>> clazz;but I cannot assign a value to it as
clazz = List<String>.class;The compiler also complains about
Class<List<?>> clazz0 = List<?>.class;yet it has the nerve to warn about raw types when I give up and use
Class<List> clazz0 = List.class;Even using a dummy instance does not work.
List<String> dummy = new ArrayList<String>();
Class<List<String>> clazz1 = dummy.getClass();I only care because I've declared a method like
public String useless( Class<List<String>> unSetable){
return unSetable.getName();
}And now there seems to be no way to call it.

Hello chymes,
there is no way to get an instance of Class<List<String>> without at least one unchecked warning. Otherwise you could get away with the following:
List<Integer> ints = new ArrayList<Integer>();
Class<List<String>> clazz = List<String>.class;
List<String> strings = clazz.cast(ints);
strings.add("No Good");
int i = ints.get(0); // CCETherefore the only way to get it is via unchecked cast:
Class<List<String>> clazz = (Class<List<String>>) (Object) List.class;With kind regards
Ben

Assigning value to variable within Range

The Problem:
Range of values permitted is 10 < x < 30. x starts at 20. Variable x increments by 5, on a button click, until it reaches 30, at which point it should decrement by 5, until it reaches 10, before moving up the range again... and so on.
I'm sure this is quite simple, but it's been bugging me for hours... the following simple increments by 5.
How would I include range constraint. please some help.
void jButton_mouseClicked(MouseEvent e) {
int r = aBall.radius();
aBall.rad = r + 5;
repaint();
}

You're right, perhaps, nasch_.
When I was starting out, I learned a lot from looking at code and then figuring out how to adapt it. Perhaps I have denied the OP this opportunity.
To learn more from the code I posted, OP, don't just copy and paste it. As nasch_ was pointing out, you absolutely must learn how to translate requirements in English (or language of your choice) into code. If-statements ar crucial elements. Look at the code and figure out how it matches your requirements. Think about what you have to do logically - When the size would be less than 10, you need to grow instead of shrink... etc. Write out (or at least think out) every scenario that your code has to react to. Size would be in range, size would be too large, size would be too small, ball is growing, ball is shrinking, etc. Make every possible combination and figure out how you must react.
When your logic is hammered out like that, in natural language, start converting to logic. You see that your code has to remember whether your Ball is growing or shrinking. Your Ball should know it's minimum and maximum size (which my code ignores, making it less flexible). Turn your scenarios into If-statements. Your first code could have way too many If-elses, but get it to work, and then refine it by combining and nesting statements.
Don't ever just copy and paste code. You won't learn how to do anything yourself. Learn from code you see. Take this opportunity to not just solve the immediate problem, but to realize that this is an area of your skills that needs improvement and follow through on improving it.
-- end soapbox

Assigning value to an item

Is there a way to assign value to variable
of data type ITEM? In other words, I need to
assign value to an item, where I just know the
it_id.
In the following procedure p_item is unknown until runtime;
and if it_id is not null then assign some value to the item.
procedure update_item(p_item)
is
it_id item := find_item('block1.'||p_item);
if not id_null(it_id) then
it_id := 'some_value'; --doesn't work.
end if;
end;

Do you mean you know the name of the item and you want to then assign a value?
If so then use the COPY command which allows you to assign a value to a named variable
e.g.
COPY (12345, 'blocka.number_item1');
To read the value in the same way use the NAME_IN function.
There is plenty in the forms helps about this.
Mark

# value in Variable Selection screen

Hello,
Can you please help with the below:
How do we remove # (Not Assigned) value from Variable selection screen. When I select PLANT in one of the report, I see # value. But there are no empty values in the cube. So, I am not sure as why I am getting this # value in Selection Screen. The seeting in Web designer for READ MODE is "Posted Values" and not "Master data or Dimension Table".
Thanks.

have you checked what Bex properties are set in the Info Object for "Query Def. Filter Value S"
Select Values from Info provider.
that might solve your problem. But ensure you're not disturbing anything else by changing this property.
Regards, Siva
Message was edited by:
Siva Bonam

Error Specify a value for variable-Abort System error in program SAPLRRK0 a

Dear Experts,
Could anyone help me to fix this issue?
I have an Customer exit variable in my query to calulate the first week of the prior year value as per the system calendar. when i execute the query, I am receiving the following error messaged and i am throwing out from the BW server.
The error message is
Error Specify a value for variable ZR00**
Abort System error in program SAPLRRK0 and form APPEND_KHANDLE_1-01-
Many thanks in advance.
Regards.
Krishna.

Hi Kishor,
try runnig the same query in RSRT, with execute and debug option.
Also check in query designer for its correctness.
Hope this helps...
Regards,
umesh

Is an assigned value to an variable in the domain of the data element

Hi
how can I check if the value, which I want to assign to an variable is in the domain of the data element of that variable.
Example:
I defined a data element myDataElement. The Elementary Type of myDataElement is the Domain myDomain.
myDomain has the Format: Char with Length 1 and the fixed values 'A' and 'B'.
The following code works, but IMHO should not:
DATA testVar TYPE myDomain.
testVar = 'Foo'.
The value of testVar is now: 'F' .
As 'F' is not in the fixed values, this is a behaviour which I don't want. How can I prevent this from not happening (without using a bunch of IFs)?
In such a case, it were nice if an exception were raised.
Regards
Gilles

Thanks Gungor.
I tried it with DDUT_DOMVALUES_GET. Works so far. I think I will write some FMs on my own, like this one:
FUNCTION z_valueisindomain.
*"*"Local Interface:
*" IMPORTING
*"     REFERENCE(IV_DOMAINNAME) TYPE DDOBJNAME
*"     REFERENCE(IV_EVALUATING_VALUE) TYPE ANY
*" EXPORTING
*"     REFERENCE(EV_DESTINATION) TYPE ANY
*" EXCEPTIONS
*"      ILLEGAL_INPUT
*"      NOT_IN_DOMAIN
DATA domainvalues TYPE TABLE OF dd07v.
CALL FUNCTION 'DDUT_DOMVALUES_GET'
    EXPORTING
      name          = iv_domainname
    TABLES
      dd07v_tab     = domainvalues
    EXCEPTIONS
      illegal_input = 1
      OTHERS        = 2.
IF sy-subrc <> 0.
    RAISE illegal_input.
ENDIF.
DATA oneline TYPE dd07v.
LOOP AT domainvalues INTO oneline.
    IF oneline-domvalue_l EQ iv_evaluating_value.
      ev_destination = iv_evaluating_value.
      EXIT.
    ENDIF.
ENDLOOP.
IF ev_destination IS INITIAL.
    RAISE not_in_domain.
ENDIF.
ENDFUNCTION.
I'm pretty new to ABAP, so this FM might not be very elegant.
Regards
Gilles

Cannot assign value to a Variable of Complex Type beyond index 1

Hello:
I have a variable defined as a complex type as followed. I tried to assign a value to each of the two elements but it only allows me to assign to the 'element#1.
This statement that tries to assign a value into element#2 will not work, if I assign with '[1]' for the first element it will work:
<copy> <---- THIS WORKS
<from expression="'John'"/>
<to variable="My_Variable"
part="My_Collection"
query="/ns9:My_Collection/ns9:Collection/ns9:Collection_Item[1]/ns9:pname"/>
</copy>
<copy> <---- THIS DOES NOT WORK
<from expression="'John'"/>
<to variable="My_Variable"
part="My_Collection"
query="/ns9:My_Collection/ns9:Collection/ns9:Collection_Item[2]/ns9:pname"/>
</copy>
Is there something wrong with my definition below that allows only element#1 to be refererenced but not element#2???? Am I missing some kind of initialization that is needed to initialize both elements????
Here are my message and Complex Type definitions:
<variable name="My_Variable" messageType="ns8:args_out_msg"/>
<message name="args_out_msg">
<part name="My_Collection" element="db:My_Collection"/>
</message>
<element name="My_Collection">
<complexType>
<sequence>
<element name="Collection" type="db:Collection_Type" db:index="2" db:type="Array" minOccurs="0" nillable="true"/>
<element name="Ret" type="string" db:index="3" db:type="VARCHAR2" minOccurs="0" nillable="true"/>
</sequence>
</complexType>
</element>
<complexType name="Collection_Type">
<sequence>
<element name="Collection_Item" type="db:Collection_Type_Struct" db:type="Struct" minOccurs="0" maxOccurs="unbounded" nillable="true"/>
</sequence>
</complexType>
<complexType name="Collection_Type_Struct">
<sequence>
<element name="pname" db:type="VARCHAR2" minOccurs="0" nillable="true">
<simpleType>
<restriction base="string">
<maxLength value="25"/>
</restriction>
</simpleType>
</element>
</sequence>
</complexType>
The error msg it gives me is as followed:
[2010/09/04 00:47:59] Error in <assign> expression: <to> value is empty at line "254". The XPath expression : "" returns zero node, when applied to document shown below:less
oracle.xml.parser.v2.XMLElement@1fa7874
[2010/09/04 00:47:59] "{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure" has been thrown.less
-<selectionFailure xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/">
-<part name="summary">
<summary>
XPath query string returns zero node.
According to BPEL4WS spec 1.1 section 14.3, The assign activity <to> part query should not return zero node.
Please check the BPEL source at line number "254" and verify the <to> part xpath query.
</summary>
</part>
</selectionFailure>
Thanks
Newbie

Hello:
Base on the suggestion to use 'append' instead of 'copy', I tried to define a 'singleNode' which is of type 'Collection_Type_Struct' so I can append this individual 'struct' into my array (i.e. as the 2nd. element of my array "/ns9:My_Collection/ns9:Collection/ns9:Collection_Item"), but I am getting an error in defining this variable as:
<variable name="singleNode" element="Collection_Type_Struct"/> <--- error
Can someone tell me how should I define "singleNode" so I can put a value in it and then append this 'singleNode' into the array:
<variable name="singleNode" element=" how to define this????"/>
<assign>
<copy>
<frem expression="'Element2Value'"/>
<to variable="singleNode"
part="My_Collection"
query="/ns9:My_Collection/ns9:Collection/ns9:Collection_Item/ns9:pname"/>
</copy>
</assign>
<bpelx:assign>
<bpelx:append>
<from variable="singleNode" query="/ns9:My_Collection/ns9:Collection/ns9:Collection_Item"/>
<to variable="My_Variable"
"part="My_Collection"
query="/ns9:My_Collection/ns9:Collection"/>
</bpelx:append>
</bpelx:assign>
Again here is my definition in my .xsd file:
<element name="My_Collection">
<complexType>
<sequence>
<element name="Collection" type="db:Collection_Type" db:index="2" db:type="Array" minOccurs="0" nillable="true"/>
<element name="Ret" type="string" db:index="3" db:type="VARCHAR2" minOccurs="0" nillable="true"/>
</sequence>
</complexType>
</element>
<complexType name="Collection_Type">
<sequence>
<element name="Collection_Item" type="db:Collection_Type_Struct" db:type="Struct" minOccurs="0" maxOccurs="unbounded" nillable="true"/>
</sequence>
</complexType>
<complexType name="Collection_Type_Struct">
<sequence>
<element name="pname" db:type="VARCHAR2" minOccurs="0" nillable="true">
<simpleType>
<restriction base="string">
<maxLength value="25"/>
</restriction>
</simpleType>
</element>
</sequence>
</complexType>
Thanks for any help!!!!

Assigning value to variable defined as LOCAL in standard program

Similar Messages

Maybe you are looking for