Assignment of material to sub-operations

Hi friends,
Please tell me whether we can assign a item from the BOM to a Sub-operation?
I tried to assign it but it is getting assigned to the main operation only?
please throw some clarity on it.
regards
Ramesh

Hi,
A sub-operation is used when a detailed planning of the process to be done in an (main) operation is required. The material component is assigned to the first operation by default.If you want to assign the component to a different operation then you can use component allocation tab.
Hence, there is no need to assign the material to a sub-operation since the main operation is already assigned a material.
Hope this helps.
Regards,
Senthilkumar

Similar Messages

  • Components assignment to Sub operation

    Hi Gurus
    I have a situation where i need to assign a components to Sub operations. System is not showing any sub operations to assign to BOM components.
    My client wants the sub operations to be created and some components assigned to it. So when milestone confirmation is done for the primary operation all the components and the operations should get backflushed.
    Please suggest if there is any configuration step needed for this.
    Thanks in advance
    Quantum.

    Hi,
    Refer below link:
    [Assigning Material Components to Operations/sub-Operations|http://help.sap.com/saphelp_erp60_sp/helpdata/en/92/91a815a9d511d189090000e8323492/content.htm]
    Regards,
    Siva

  • Assigning Material Componet to operation in PM.

    Hi All,
    While creating task list(tcode IA05), i need to assign Componets to operation activity.Now in the componet assignment, the material deatils(material,quantity etc) are to be picked from different storage location of same plant( as same material is present in more than one storage location within same plant).But here the problem is that the storage location field "Sloc" is uneditable i.e grayed.How to select material from multiple storage location?

    hi
    i think you cannot able to assign the storage location in the task list ,since it is used for planning you cannot plan for particular storage location ,you can use customer exit in the maintenance order to determine the storage location
    regards
    thyagarajan

  • How to fetch Routing Sub Operation details

    hi all,
    I am downloading routing details from tables MAPL PLKO PLPO . But I am unable to find routing sub operation details.
    Could you all help me how and from where to retrieve the information
    Thanks.

    Routing
    <b>PLPO          Routing Operation Details
    PLKO         Routing Header Details
    MAPL         Routing Link to Material
    PLAB          Relationships - Standard Network
    PLAS          Task List - Selection of Operations
    PLMZ         Component Allocation
    PLPH          CAPP Sub-operations
    PLFH          PRT Allocation
    PLWP         Maintenance Package Allocation
    PLMK         Inspection Characteristics
    PLAH</b>
    Engineering Change Management
    AENR        Customer and priority
    AEOI          Revision Numbers
    Work Center
    CRHD         Workcenter Header Data
    CRCA         Workcenter Capacity Allocation
    CRCO         Workcenter Cost Center Assignment
    CRHH          Hierarchy Header
    CRHS           Hierarchy Structure
    CRTX          Workcenter Text
    KAKO         Capacity Header
    KAZY          Intervals of Capacity
    Bill of Material
    STPO          BOM Item Details
    STPU          BOM Sub Items (designators)
    STKO         BOM Header Details
    MAST         BOM Group to Material
    STZU          BOM History Records
    STAS          BOM Item Selection
    STPF           BOM Explosion Structure
    Line Design
    LDLH          Line Hierarchy Header
    LDLP          Line Hierarchy Items
    LDLT          Line Hierarchy Takt Times
    LDLBC       Takts/No. Individual Capacities per Line
    LDLBH       Line Balance Header 
    LDLBP        Line Balance Items
    LDLBT        Line Hierarchy Entry and Exit Takts
    PRT's
    CRFH          PRT Master Data
    CRVD_A     Link of PRT to Document
    CRVD_B     Link of Document to PRT
    CRVE_A     Assignment of PRT data to Equipment
    CRVE_B     Assignment of equipment to PRT data
    CRVM_A    Link of PRT data to Material
    CRVM_B    Link of Material to PRT data
    CRVS_A     Link of PRT Internal number to PRT External number
    CRVS_B     Link of PRT External number to PRT Internal number 
    Thanks
    Seshu

  • Advantage of sub operations.

    Hi ,
    Whats the advantage of suboperations.how Is it different in a process?
    why cant the sub operation be a regular operation in routing .
    what is thebenefit we get by using suboperations technically or is it just a business process.

    Hi,
    you can use sub-operations to assign several people or machine that are required at the same time, to an operation. An sub-operation can be costed, but can only be scheduled relative to superior operation. You can cumulate standard values from sub-operations on the corresponding operation. You can determine whether sub-operations belonging to an operation are copied into the production order.
    Example:
    When a Object is Passing through A MILLING Machine Or through A AUTO lathe where upon completion the object need to be performed with DE-Burring In this scenario we usually adopt sub-operations
    Depending on your requirements, a sub-operation can contain the following data:
    1)A control key, which specifies
    Whether costs are determined for the sub-operation
    Whether the sub-operation is processed internally or externally by a vendor.
    Whether, afterwards in order processing, a confirmation can or must be made
    2)A wage type for settling incentive wages
    3)Standard values, which are planned values for the activities to be performed in a sub-operation.
    4)External processing data, which form the basis for externally processing sub-operations
    5)User-defined fields with any customer-defined data
    Where as You cannot assign material components, production resources/tools nor inspection characteristics to sub-operations, only to operations.
    pavan

  • Re-costing of header material when Sub-item material BOM is updated

    Hi ,
    A sales order is created with a header material (HM) and coressponding sub items (SM1 & SM2 ) got populated automatically from the BOM.Now the costing for this three line items happened as expected i.e.,
    For example :
    Header  Material : HM
              Sub item1 :-      SM1
              Sub item2 :-      SM2
                  MAP of Sub item 1 > SM1  = 20 USD
                  MAP of Sub item 2 > SM2  = 30 USD
    Costing in the main line item appears as 50 USD ( 20 + 30 USD) .
    Now business go to the transaction CU51 and make the changes in the sales order BOM subitem1 ,material SM1 by adding or deleting items in the BOM. After that they are trying to re-cost the sales order and it is observed that only the corresonding sub item (SM1) is getting re-costed with new value.But the header item HM is not getting updated with the new values it still have the old values .
    It would be really helpful if you can let me know what is the issue for this.
    Thanks!
    Regards,
    Dileep.

    Dear Pushpalas,
    IF my understanding is correct then the sub-items is only to split up the exact component quantity and it's usage in the exact
    production or assembly process for information or understanding purpose.
    Sub-items have no operational function in the BOM. They are not copied to the production order. However, you can use sub-
    items to help you create programs for your company (for example, automatic assembly programs).
    http://help.sap.com/erp2005_ehp_05/helpdata/EN/ea/e9b1aa4c7211d189520000e829fbbd/frameset.htm
    Regards
    Mangalraj.S

  • How to Assignment between Material and Account Assignment Group

    Hi,
    When we are creating a sales order with material ABCD, then in material line item -->under Billing Document Tab --> in Accounting screen, there is field Acct asgnmt grp (Account Assignment Group).
    From where we can assign between Material and Account Assignment Group, after that it automatically pick in sales order creation.
    Please guide..

    Please refere to below link it may help.
    Re: how to configure new account assignment group of material
    Thanks Dev.

  • Need to restrict view of DIRs assigned to material, vendor, and customer

    Hello,
    SAP standard, version ECC 6.0. Different plants in use with requirement for differnt authorizations.
    I know that DIRs can be assigned to material master. However, the problem is that it's client level data. Now there is a need to implement DMS with materials, vendors, and customers.
    Problem is that company operates in different countries and with different plants. One material/customer/vendor is created and then extended to cover different plants.
    Material 1111 has a specification assigned to it, e.g. document type ZSP with DIR 1000001111, this document is at client level.
    Person A from plant 1000 can display and maintain it (1000001111) but person B from 2000 must not see this, she has DIR 10000011113 instead (and person A should see this).
    If person A has authorizations which are limited by the plant type because of the usage of MM already, do these restrictions apply also to DMS? I haven't found a definite answer for this.
    I cannot set a authorization object based on document type and maintaining different uthorization groups is the last option because of the vast number of  users.
    The same question is for customer. if there is e.g. a contract assigned to customer, can the view be restricted by distribution channel or another field provided by SD (standard solution).
    Vendor master is the 3rd major issue. How to limit access to documents?
    Help is highly appreciated.
    Thanks in advance,
    Pia

    Hi,
    Can you please elaborate what is the object you mean. I have serious problems with system and cannot check it.
    Thanks,
    Pia

  • Use of field "design documents assigned" in material master

    hi,
    kindly help me to use the field "design documents assigned" in material master. whenever i creat material master (MM01) in basic data2 view this field comes with grey/black No Link indicator. how to use this and for what .
    regards
    roshan s.

    Hi Roshan,
    Insted of using this field u can assign Document directly to the Additional Data tab.
    TO attach the document to Material Master go to Additional data ---> Document data, assign Document.
    You can confirm it by pressing F1 key by selecting that Field.
    Regards,
    Dhaval
    Edited by: Dhaval Choksi on Jul 10, 2008 3:26 PM

  • Block Material for all operations

    Hi gurus,
    I need block a material for all operations. In material master, field X-plant matl status is ok with all possible blocks that system offers. But, I can still do inventory, and other operations...
    How Can I block for all operations a material???
    Thank you
    I will reward with points all answers

    In IM it is possibel to block but in WM it isn't (according to my best knowledge).
    WM-inventory > block WM inventory booking of materials that are out of use
    http://www.sapfans.com/forums/viewtopic.php?f=6&t=291342
    Edited by: Csaba Szommer on Jun 12, 2008 11:43 AM

  • Key Operation and Sub operation PM order

    Hi,
    What is the key (table - field) which determines the relationship between the main operation and the sub operation?
    I mean how can you detemrine that suboperation X is indeed a sub operation of this particular operation Y? You have AUFNR, AUFPL, but i'm missing somethin...
    regards,
    bert

    thanks,
    APLZL of main operation and SUMNR of suboperation

  • Control key for sub-operation

    Hi, what is the control key used for sub-operations for which we do not want seperate confirmation. when main operation confirms, the sub-operation should get confirm automatically. please advise.

    hi,
    You can use PP03 or *PP05 * or any other which dont have tick for confirmation required.
    only thing is that , other details also you need to check for.
    Depending on your requirements, a sub-operation can contain the following data:
    A control key, which specifies
    Whether costs are determined for the sub-operation
    Whether the sub-operation is processed internally or externally by a vendor.
    Whether, afterwards in order processing, a confirmation can or must be made
    A wage type for settling incentive wages
    Standard values, which are planned values for the activities to be performed in a sub-operation.
    External processing data, which form the basis for externally processing sub-operations
    User-defined fields with any customer-defined data
    Check and revert back
    regards
    Ritesh

  • Copy control for material determination sub item

    I had created material determination sub item(TAPS) correctly on sales order, but when I use VL01N, the sub item does not copy into the outbound delivery.
    My item level of delivery copy control configuration (VTLA)  is as below:
    order requirement: 101
    item date: 110
    Does anyone offer some suggestion?
    Thanks!

    Our case is:
    standard sales order type "KB":
    item_number          item_category         material_number          Qty
    10                          TAX                         A                                  10
    11                          TAPS                       B                                    1
    12                          TAPS                       C                                    9
    but the result of  standard outbound delivery "LF" that I created from foregoing order is:
    item_number          item_category         material_number          Qty
    10                          TAX                         A                                  10
    20                          TAPS                       A                                  10
    I would like to know where the configuration should I make a modification for correct delivery to resemble the following:
    item_number          item_category         material_number          Qty
    10                          TAX                         A                                  10
    20                          TAPS                       B                                    1
    30                          TAPS                       C                                    9

  • Assign equipment to work order operations

    What configuration is needed to be able to assign a equipment to work order operation ?
    I already have few equipments assigned to a work order (displayed on the objects tab) but I need to assign some equipments to certain operations.

    Sveinn,
      You would need to be in ECC6.0 to be able to do this. This should be available through SPRO under PM> Maintenace and service processing > Functions and setting for order types > Define notification and order integration.Within this you would need to enable the assignment of operations to object list for specific order types.
    Hope it helps.
    Regards
    Narasimhan

  • TIME TICKET CONFIRMATION IS NOT EXICUTING AT SUB OPERATION

    Hi,
    We are trying to post Time ticket Confirmation at sub-operation level
    through standard web service. Up to Operation level,standard web
    service is working fine but problem arises when we do posting at sub-operation
    level.Web service is not working for sub operation level.
    Please find attached step wise details of the process which we
    are following.

    Dear Sir,
                   As per your reply I have set the Act. Data in OPK4. Screen areas in OPK0 for Dates were already set open. After doing the OPK4 settings if I am setting execution start and finish time for a phase in COR6N as 10:00:00 and 10:15:00 accordingly in the order for that particular phase in the details screen start and finish time (in the Dates tab) is updating but in the Qty/activities tab the confirmed time is not updating to 0.25 hrs (it is showing 0). Even during COR6N after putting start and finish time in the Dates tab the activity in the u201DTo confirmu201D tab is not updating . When I click actual data in COR6N screen, that activity(time) is picking up the value as per the scheduling through recipe. And only if I manually change that time to 0.25 hr, then it is updating in the Qty/activities tab in details screen of that phase in the order. But I want to select the Execution start and Finish time in Dates tab of COR6N and want the system to update the figure in Activities tab of COR6N as the calculated difference between start and finish and the same updated value should be transferred to the Qty/activities tab of the phase details in the order. Please suggest how to achieve this....
    Regards,
    Sunit

Maybe you are looking for