Assignment of Tcode for Report painter's report

Hi,
I have created one report on Controlling module through report painter. I created Sets - Variable - created report on Library - assigned variable to that report and included that report into Report Group as ZCC8 before final execute. Now I want to add that report into form of Tcode like "Y_TU4_04000027". Normally ABAP Consultants developed report and before delivery of that report to client they attach that report into as tecode form like name as Z or Y through tcode SE93 where tcodes are created. Same way please let me know how report painter's tcode are created like Y or Z. I do not like to give report group name as ZCC8 to our client for executing the report. It should deliver as tcode form.
Please let me know.
Regards,
Samrat
Moderator: Please, search SDN before posting. This question has been answered several times

HI Samrat
1. Create the transaction code,say, ZF01_TCODE from Se93
2. Choose "Transaction with parameters".. Press enter
3. Enter START_REPORT in the Transaction field and press Enter
4. Select the Skip initial screen and Inherit GUI attributes check boxes
5. On the same screen, scroll down to the Default Values table and select parameters D_SREPOVARI-REPORTTYPE and
D_SREPOVARI-REPORT.
6. Enter RW for the report type and your report group ZCC8 as the report value
7. Now you can save your transaction and transport it to other systems
Regards
Ajay M

Similar Messages

Mass Change of Sets for Report Painter/Writer Reports

Hi,
We have upgraded our system from 4.6c to ECC 6.0. We are using more
than 40 Report Painter/Writer reports which in turn are using Sets.
However, these sets are containing reference to a Table which we want
to change for all the set enmasse. e.g. If currently the sets are using
Table Reference "ABC", we want to change it to "XYZ" because the
table "ABC" is not at all existing in our new system ECC 6.0.
Even we are unable to change the sets through T.Code GS02 as the table
itself is not existing. And as the table is not existing, the Reports
are giving hard errors saying that the sets do not exist.
Kindly request you to guide us in this regard.
Thanks in advance,
Shalin Shah

Looks like you have to create new sets and assign them in the report replacing the old ones.

Assigning a Tcode for SQ02/SQ01 query

Dear All,
To create query i have used following steps
1. In SQVI check the Infoset name associated with the query you are trying to run.
2. Go to SQ02 using the infoset name.
3. Select "Field Groups" on the toolbar. Add the field in this field group.
4. Go to the "Code" tab on the next screen.
5. Select "Code Section" as "Record Processing" and write the code to populate the
column.
6. Activate the Infoset and then activate the Query also.
After this how to assign a tcode for the query
pls explain in detail.
Thanks.

Hi,
Follow the below mentioned steps:
Go to Tcode SE93 give the name of the tcode which you want to be create. Give description in the next screen and select last or 5th radio button(Transaction with Parameters) and press enter in the next screen give the Transaction as START_REPORT, next check the skip initial screen check box, next select all the GUI support check boxes, next in default values section D_SREPOVARI-REPORTTYPE = AQ(Give your own text), D_SREPOVARI-REPORT = your query name, then save it and check it.
Cheers,
Bujji

Differences Between Report Painter and Report Writer

Hi,
Anyone knows the differences between report painter and report writer?
Thanks,
CW

Hello CW Teo,
Yes report writer can be used in logistics also. One of the way which I am aware of is described below.
Flexible analyses allow you to can tailor the way in which key figures are combined and aggregated. This means that it is possible to both provide administrators with detailed information and management with aggregated information.
Flexible analyses enable easy access to the Report Writer, a user-friendly tool with which you can create reports for various analyses. The Report Writer is integrated in other SAP applications, such as Extended General Ledger and Cost Center Accounting.
Evaluation structures form the interface to the Report Writer. Evaluation structures consist of characteristics and key figures and are easy to construct.An evaluation structure with the same name exists for each information structure in the standard system.Even the self-defined information structures created in Customizing can be evaluated via the flexible analyses.
Evaluations:You can create an evaluation on the basis of the evaluation structure.
To define an evaluation, all you need to do is select the characteristics and key figures you require (pick-up technique).One of the especially useful features here is that you have the option of tailoring the layout of your report to suit your particular requirements. You can also define extra key figures for the reports, which are derived from existing key figures by means of calculation formulas. You can thereby multiply the key figures or divide one key figure by another.
============================================================
In addition to the above you can also edit a report in logistics module with the help of a report writer. below mentioned is the process for it.
It is now possible to edit your report data using the Report Writer. You can also change the layout of the report. The most important functions of the layout design are summarized below.
Summation levels:In the report screen, you can use the menu sequence View ->Summation level to specify the number of summation used to calculate total values. All totals that do not lie within the specified interval will be hidden. A summation level corresponds to a hierarchical level (for example, material level). Summation level 1 is the lowest hierarchical level. Summation level 2 is the next level up, and so on. The individual values are on the summation level 0.
The summation levels can be specified both universally (for the entire report) or locally (for specific blocks of rows). In this case, the local settings overwrite global values.
Report views:If a report is displayed on the screen, the Report Writer will then set page breaks so that exactly one page fits into the current window. This view will be defined as the standard view. As the Report Writer always processes exactly one page, you can only use the page keys and page icons to page up and down; the scroll bars cannot be used.
The page view can be determined via Settings-> Page view. The page breaks in the page view correspond to those defined in the report layout.
Hide and show rows:The function Edit->Hide rows exclude certain preselected areas of your report from the display. You can undo this command with Edit ® Show rows.
Expanding and collapsing report rows:View-> Hierarchy->Collapse allows you to hide the report rows of the sub-trees that are located underneath. View->Hierarchy ->Expand allows you to undo this command level by level.
If you want to display all the report rows that were hidden by collapsing the hierarchy or restricting the summation levels, select, View->Hierarchy-> Expand all.
View->Collapse all allows you to reduced every row block to the highest summation level.
Texts and Annotations:You can create an annotation for your report.
Select: Extras->Annotation.
You branch into the text editor of the Report Writer.
Via the menu sequence Settings->Texts, you can create and format a title page, the last page, as well as headers and footers using word processing functions.
For example, you can store variables in the header for the author of the report, the date of the selection or the name of the person who last changed the report.
Layout parameters:Using the menu sequence Settings->Layout you can specify the page format, display form, rows and columns of the report according to your needs and you can determine the settings for the graphics function. You can make these layout settings with Report->Save settings.
Hope I had been able to help you to some extent. please assign points as reward.
Rgds
Manish

Error in the Report Painter standard reports delivered by SAP library 1VK

Hi,
The Report Painter standard reports delivered by SAP contain the following errors, after the upgrade from 4.6C to ECC 6.0,in the report 1LMA-001 (library 1VK, report group 1LMA), actual for activity types
are missing.
I already copy from client 000 and generated, but still missing the actual for the activity types.
Thanks in advanced for you support,
Susana

Hi,
Firts of all thanks for you answer.
Process flow:
1. production order confirmation CO11N
2. after production confirmation if we check the in order CO03 cost/analysis, the actual for the activity is there.
3. afterwards with we execute report S_ALR_87013646, the actual for the activity type is missing.
Report group 1LMA-001 library 1VK.
I already did:
1. GR59
2. Report RGRJBG00
3. OKB6
Regards,
Susana

Report Painter Vs Report writer

hi
I want to know the difference between Report painter and Report writer and also the configuration process of Report painter for the purpose of CO-PA.
plz forward the config manual to [email protected]
thanq urgent

Report writer or report painters are used for the balance sheet related reports mapping from FSV and profit center/cost center related reports, it is nothing but excel work, it is very simple.
u can develop the report by mapping of GL accounts/profit center/cost center.
if you want more details, please log on the following link.
http://help.sap.com/erp2005_ehp_02/helpdata/en/56/32e339b62b3011e10000000a11402f/frameset.htm

Report Painter and Report Writer (URGENT)

Hi All,
Please can you send me Step by Step screen shots Configuration document for Report Painter and Report Writer,
If any body send relavent data i will give reword points,
Regards,
TML

Hi,
see the below link cfor complete documentaion of report painter.
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
Thanks.

Report Painter and Report Query

Hi,
Can some body explain me the difference between Report painter and report queries. How these are diffrent from ABAP prgram and ABAP queries. Who are the persons who are using all these like functional consultant or ABAPer or End users.
Regards
RKG.

Hi
Report Painter is mainly used by CO functional consultants for generating reports using variables, Key fugures and sets. This is a SAP standard functionality.
ABAB Queries / Report queries are created by Abapers and Functional consultants , this is mainly to join two or more tables run a query on the available data in the table and get the reports
ABAP program are complete program which are the coding language of SAP, where a program can be created for a new functionality which is not available in SAP . However the data required for this program has to available in SAP.
Anand

Adding own Company Logo to Report Painter/Writer reports

Hi,
Trying to add my company logo to the report painter/Writer reports that i am producing but cant do it, i know its possible as i covered it on the SAP course on this but cant find the way, any help appreciated?

Hi all,
Unfortunately there is no function to insert company logo in the report painter report up to 4.6C version.
I'm sorry about I could not give you better solution.
Thanks and best regards,
If you have further queries, you may reach me over
Dr. Ravi Surya Subrahmanyam, PhD Finance,
SAP FICO Consultant,
Answerthink (India) Limited
Global Delivery Center
Hyderabad, India
Phone :91 9848550024
Email : [email protected]

Dump thrown when tcode for screen painter assigned

HI guys,
I have created a screen and wanted to check how it looks at runtime, for this i assigned a tcode to the report. Now when i run the tcode it throws a dump. the dump is as follows.
The CONTROL "TCTRL_ENTRY" was searched for but not found.
These is either an inconsistency between the screen and the program or
an incorrect ABAP statement (for example, REFRESH CONTROL .. FROM SCREEN
with incorrect control name).
    MODULE STATUS_1000 OUTPUT.
     SET PF-STATUS 'SCR_1000'.
     SET TITLEBAR '001'.
ENDMODULE.                 " The pointer for error is at this line
What could be the possible error?? please let me know.
Thanks in advance...
Regards,
Navin
Edited by: navin.c on Mar 25, 2009 8:18 AM

Do your main program have the piece of code like the following?
CONTROLS:TC_9998 TYPE TABLEVIEW USING SCREEN 9998.
This way you have to declare a table contol. Do it simply with your Table Control name and the screen in which you are using it.E.g. in my case screen is 9998.
regards.
Sarbajit

Report Painter and Report Writer..

Hi Friends,
I need documents related to Report Writer/Painter.
It will be really helpful to me..
I will assgin points..
Takecare
bye

hi
Report painter
the below Pdf should help you
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
Report writer
http://help.sap.com/erp2005_ehp_03/helpdata/EN/66/bc7dc143c211d182b30000e829fbfe/frameset.htm
http://help.sap.com/erp2005_ehp_03/helpdata/EN/5b/d22ba743c611d182b30000e829fbfe/frameset.htm
http://help.sap.com/erp2005_ehp_03/helpdata/EN/5b/d2301b43c611d182b30000e829fbfe/frameset.htm
http://help.sap.com/erp2005_ehp_03/helpdata/EN/84/b0b7397a672963e10000000a114084/frameset.htm
http://help.sap.com/erp2005_ehp_03/helpdata/EN/47/13420aad483127e10000000a1553f7/frameset.htm
nag

Tcode for HR Forms and Reports

I am working on HR Forms and Reports. Can you suggest Which Transaction codes I have to use for Forms creation and changes.

Use Tcode PE51 for maintaining forms

Suppress 'SAVE' functionality on Report Painter/Writer Report

On the R/3, end-user side, is there a way to suppress the menu bar (Report, Edit, Goto, Extras, etc.) and the 'Save' icon? Our end users are able to change the definition and layout, then 'Save' and it messes-up the report for other users. I'd like to know if this can be accomplished on the Report Writer/Painter configuration side without code. Thank you.

Hi bill,
i have never tried this but the menu bar can be changed/hidden with
a transaction and a screen variant.. tcode wud me shd0.
howver go thru this link for better ref..
http://help.sap.com/saphelp_47x200/helpdata/en/67/232037ebf1cc09e10000009b38f889/frameset.htm
hope this helps u a bit,
all the best,
regards,
sampath
mark helpful answers

In Report Painter, my report starts on the second page

How do I prevent this from happening?
I went into section overview and joined my 3 sections into 1 table. When I go to view it in gr55 > z9ab I have to scroll all the way down and my report starts on page 2.

Hi Daniel,
Please check the following document for creating a discussion in the appropriate space within SCN: http://scn.sap.com/docs/DOC-18467
You may have the ability to move this discussion to the right area. If not, please close this discussion, and open a new one.
Many thanks,
Kristen

Report Painter - Display Report

Dear Friends,
While displaying/changing Z reports from GRR3 transaction, we are getting short dump.
The dump does not occur for standard transactions.
The error occuring is:
The current application program detected a situation which really should not occur. Therefore, a termination with a short dump was triggered on purpose by the key word MESSAGE (type X).
Short text of error message:
RAISE MKES1F12_READ_FPAGE_FCOLUMN       (internal error)
Please let us know if anything further need to be done with the Z reports after creating them in GRR1.
Advance Thanks
Swapnil

Hi Swapnil,
Check this note
Note 330457 - Drilldown report not executable
Its related to the dump 'MKES1F12_READ_FPAGE_FCOLUMN' . Try applying the corrections in the Note.
Regards,
lakshman.

Assignment of Tcode for Report painter's report

Similar Messages

Maybe you are looking for