Assignment Operation failed....

Hi All,
I have an assignment expression created with the field "Name" which if is null ie no value at all,then should load a default value from the lookup table
I have the assignment defined as follows
If(Is_Null(Name),Name[3])
where Name[3] is a value from a lookup table.
When i execute the above assignment it fails as "Assignment Operation failed. I tried with "If then else " statement as follows and it too fails when i execute the assignment
If(Is_Null(Name),Name[3],Name)
where Name[3] is a value from a lookup table.
Any Help greatly appreciated
Thanks,
Aravind

Hi,
Check this out
IF(IS_NULL(Name),Account Group [ABC])
Above Assignment will be valid only if this Assignment is on look field Account Group and Name is the text field.
For getting value from the lookup table position the cursor accordingly in the expression and select the Lookup table from the Lookups.Once you will select the lookup table you will get the list of values present in that table.There you can select the value you want to populate.
Regards,
Jitesh Talreja

Similar Messages

Re:Assignment operation failes error

when i execute an Assignment individually depending on some criteria it is working for one record.............
But when i try to do the same for multiple records at a time it is throwing the above mentioned error.
Can anyone clear me this.........cant Assignment run on multiple records at a time.

Hi Shifali,
You want to check, if for a given main table rec,a particular rec has account group field value as XXX then it should be replaced by Static.
Is this is the case then instead of validating the record,validate the rec field only.
If(Account group.Code=XXX,STATIC,Account group.Code)
Hope It Helped
Thanks & Regards
Simona Pinto

"Active Directory operation failed on DC " when assigning Send As permissions on a distribution group

I'm trying to give a mailbox user Send As right for a distribution group. But the cmdlet comes back with this:
Get-DistributionGroup MyGroup | Add-ADPermission -user albert -ExtendedRights Send-As
Active Directory operation failed on <DC fqdn>. This error is not retriable. Additional information: Access is denied.
Active directory response: 00000005: SecErr: DSID-03151E07, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0
+ CategoryInfo : WriteError: (0:Int32) [Add-ADPermission], ADOperationException
+ FullyQualifiedErrorId : FE24751F,Microsoft.Exchange.Management.RecipientTasks.AddADPermission
What could be the problem, considering the items below :
- inheritance is not broken to the level of the distribution group object
- the account used to run the cmdlet is a member of the Organization Management group
- creating a new distribution group in the same OU and running the command works as expected; checking the permission for this group against MyGroup (using Get-DistributionGroup testgroup | Get-ADPermission | Sort-Object User,AccessRights | ft user,accessrights,extendedrights,properties)
shows no differences.
- adding the permission using ADUC results in the user being able to Send As the group, however I'm trying to find out the root cause of the Powershell cmdlet execution problem
- there is no Deny permission on the group's ACL
- the group didn't have the "Hide Membership" feature of Exchange 2003 applied, so there shouldn't be any non-canonical ACL issues

Anyone ever come up with a solution to this? I get something similar when Activesync tries to create objects on user containers.
Exchange ActiveSync doesn't have sufficient permissions to create the "CN=Test User,OU=Domain Users,DC=domain,DC=com" container under Active Directory user "Active Directory operation failed on DELL7S09.domain.com. This error is not retriable.
Additional information: Access is denied.
Active directory response: 00000005: SecErr: DSID-03151E07, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0
Make sure the user has inherited permission granted to domain\Exchange Servers to allow List, Create child, Delete child of object type "msExchActiveSyncDevices" and doesn't have any deny permissions that block such operations.
Details:%3
So...I get this after I introduced a MS Exchange 2010 SP3 RU8 server into my environment. You can find LOTS of people suggesting the same fix but I've not found anything that deviates from those fixes: check the "inherit permissions",
and give full permis to msExchActiveSync devices for the Exchange Servers security group, blah blah.
I got to this point by following a Migrate to Exch2010 paper by MS. I have no Win2k servers, my old Exchange server is Win2003r2SP2 with Exch2003SP2 fully patched. The Exch server is also a DC. I installed a new 2012r2 server and then patched
it. Installed Exch2010SP3Ru8 and all seems well.
The old Exch2003 server is still in production. My iPhone army connects remotely for mail, and all works great. I created a new Test User in AD, gave it a mailbox on the 2003 server, and waited a bit. It eventually shows up in the Server
Manager on the new 2010 Exch Server. I send it a bunch of emails, connect to it with an outook client on a Win7 machine, all works. I go to the SM on the 2010 box and migrate the mailbox to the new server. It works. I can connect with
outlook, send receive mail to other users in the org. I then try to connect with my iPhone and I get the message in Event Viewer over and over.
Went so far as to Promo the new 2012 server to a DC. seems to be fine. Now am wondering if I Demote the old Exch2003 server will it help...or cause a new crop of issues....

Remote Desktop Services Properties - Operation failed: Access is denied

Hi
when i try to change the Remote Desktop Services User Profile Path with ADUC i get the error "Operation failed: Access is denied"
This error occurs in a subdomain with the Domain Admin of the Subdomain. I'm able to change this attribute with the Enterprise Admin.
As far as I understand this attribute is set in the userParameters but I don't know what permissions must be set to allow the Domain Admin to change this Attribute and why the Enterprise Admin is allowed to change the Attribute and the subdomain Admin not.
Our AD Schema is 2003.

Hi,
As per I know, this is by design because enterprise admin has full control in every domain within the forest but sub domain admin only has full control in its own domain. SO when subdomain admin try to modify they receive error instead of enterprise admin.
But still if you want to assign the permission to subdomain user to change then you can delegate below permission to user.
Read msTSProfilePath
Write msTSProfilePath
Snap:
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

ORAMED-01002:[Metadata error in assign operation]

Im using the Oracle Mediator component to assign an expression to a property. The assign expression uses the dvm:lookupValue() function to assign the outcome of the function to the property. When I invoke a message from e.g. SoapUI or the em testfeature it all works perfect. But when I use a testsuite with an initiate message that is similar to the request from SoapUI, the message fails with the following error:
Non Recoverable System Fault:
ORAMED-01002:[Metadata error in assign operation]Metadata Error occurred while assigning to target "$out.property.jca.db.XADataSourceName" using invalid expression "dvm:lookupValue("oramds:/apps/dvm/RegioCode.dvm","RegioCode",$in.request/sadr:GetHoofdaanvragerAdressenRequest/ns6:PersoonKey/ns5:RegioCode,"Datasource","jdbc/DoNotUse")".Possible Fix:Fix the expression. Cause:internal xpath error
Invoke via SoapUI results in the following instance message fragment:
<message>
Assigned "dvm:lookupValue("oramds:/apps/dvm/RegioCode.dvm","RegioCode",$in.request/sadr:GetHoofdaanvragerAdressenRequest/ns6:PersoonKey/ns5:RegioCode,"Datasource","jdbc/DoNotUse")" to "$out.property.jca.db.XADataSourceName"
</message>
Any suggestions.
Regards,
Melvin

Hi Clemens,
We've reported a service request on metalink regarding this issue. See : 3-1154677691
I've summarized the messages for you:
A SoapUI message that works:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:adr="http://www.xyz.nl/Services/AdresService"
xmlns:geb="http://www.xyz.nl/Contracten/Gebruiker"
xmlns:elem="http://www.xyz.nl/Contracten/Common/Elementen" xmlns:obj="http://www.xyz.nl/Contracten/Aanbod/Object">
<soapenv:Header/>
<soapenv:Body>
<adr:GetObjectAdresRequest>
<geb:Autorisatie>
<elem:Gebruikersnaam>xxx</elem:Gebruikersnaam>
<elem:Locale>nl-NL</elem:Locale>
<elem:Kanaal>1</elem:Kanaal>
</geb:Autorisatie>
<obj:ObjectKey>
<geb:Autorisatie>
<elem:Gebruikersnaam>xxx</elem:Gebruikersnaam>
<elem:Locale>xxx</elem:Locale>
<elem:Kanaal>x</elem:Kanaal>
</geb:Autorisatie>
<elem:RegioCode>xxx</elem:RegioCode>
<elem:Type>0</elem:Type>
<elem:Reference>xxx</elem:Reference>
</obj:ObjectKey>
</adr:GetObjectAdresRequest>
</soapenv:Body>
</soapenv:Envelope>
The testsuite initiate message which fails :
<GetObjectAdresRequest xmlns="http://www.xyz.nl/Services/AdresService">
<Autorisatie xmlns="http://www.xyz.nl/Contracten/Gebruiker">
<Gebruikersnaam xmlns="http://www.xyz.nl/Contracten/Common/Elementen">xxx</Gebruikersnaam>
<Locale xmlns="http://www.xyz.nl/Contracten/Common/Elementen">xxx</Locale>
<Kanaal xmlns="http://www.xyz.nl/Contracten/Common/Elementen">x</Kanaal>
</Autorisatie>
<ObjectKey xmlns="http://www.xyz.nl/Contracten/Aanbod/Object">
<RegioCode xmlns="http://www.xyz.nl/Contracten/Common/Elementen">xx</RegioCode>
<Type xmlns="http://www.xyz.nl/Contracten/Common/Elementen">x</Type>
<Reference xmlns="http://www.xyz.nl/Contracten/Common/Elementen">xx</Reference>
</ObjectKey>
</GetObjectAdresRequest>
The composite Test.xml file
<?xml version="1.0" encoding="UTF-8" ?>

<compositeTest compositeDN="Adres" xmlns="http://xmlns.oracle.com/sca/2006/test">
<about/>
<initiate serviceName="AdresService_ep" operation="GetObjectAdres" isAsync="false" delay="PT0S">
<message>
<part partName="request">
<content>
<GetObjectAdresRequest xmlns="http://www.xyz.nl/Services/AdresService" xmlns:ns2="http://www.xyz.nl/Contracten/Gebruiker" xmlns:ns3="http://www.xyz.nl/Contracten/Aanbod/Object">
<ns2:Autorisatie xmlns:ns4="http://www.xyz.nl/Contracten/Common/Elementen">
<ns4:Gebruikersnaam>xxx</ns4:Gebruikersnaam>
<ns4:Locale>xxx</ns4:Locale>
<ns4:Kanaal>x</ns4:Kanaal>
</ns2:Autorisatie>
<ns3:ObjectKey xmlns:ns5="http://www.xyz.nl/Contracten/Common/Elementen">
<ns5:RegioCode>xxx</ns5:RegioCode>
<ns5:Type>x</ns5:Type>
<ns5:Reference>xxx</ns5:Reference>
</ns3:ObjectKey>
</GetObjectAdresRequest>
</content>
</part>
</message>
</initiate>
</compositeTest>
Regards,
Melvin

"Package operation failed" error when trying to create ICAP file

Why is this happening? I create a new assignment and then select "Package for Incopy" and I get the error message "Package operation failed". What am I doing wrong? For draft 1 of my Mac Indesign CS5 file I created a new "assignment 1" and ICAP file and emailed to my PC Incopy CS4 client. They sent IDAP file back and all was well. I need to send draft 2 to client the same way but why am I unable to create a new ICAP file? I can't even replace the ICAP file from draft 1. Please help. Thank you! Lynn

Did you ever get it to work?
We are having the same problem.
Indesign CS4 on Mac
InCopy CS5 on PC
Though we also get an odd message when we reopen the InCopy doc, that there is another version created in 1999 which we might want to use.

EWS, Office 365, An internal server error occurred. The operation failed.

I am using EWS 2.0 to access a users calendar in Office 365. I use AutoDiscover to find the ExchagneService, then bind to the calendar via CalendarFolder.Bind and at the next statement folder.FindAppointments I get the error
An internal server error occurred. The operation failed.
I know that the credentials used to access the user are correct - have tested in the webmail and it works just fine.
If I use my own credentials (after having assigned rights to the user in question) my program does not fail. Only apparent difference is the administrator role.
Below I have listed the central parts of the code:
First the AutoDiscover (which work)
service = new ExchangeService(ExchangeVersion.Exchange2010_SP1,TimeZoneInfo.Local ); // service is a global variable
service.Credentials = new NetworkCredential(ConfigClass.CalendarReaderName, ConfigClass.CalendarReaderPassword);
service.AutodiscoverUrl(cal, RedirectionUrlValidationCallback);
Then the part where I want to get the appointments
CalendarView view = new CalendarView(_firstdate, _lastdate);
Mailbox mailbox = new Mailbox(cal); // cal is the e-mail address of the user
FolderId id = new FolderId(WellKnownFolderName.Calendar, mailbox);
CalendarFolder folder = CalendarFolder.Bind(service, id);
FindItemsResults<Appointment> findResults = folder.FindAppointments(view); // This is where the error occurs
Anybody know what this error actually means and how to solve the situation. I want to run the program using a service account rather than my personal credentials.

the error came back - but the trace revealed the error:
        <m:ResponseMessages>
          <m:FindItemResponseMessage ResponseClass="Error">
            <m:MessageText>An internal server error occurred. The operation failed.</m:MessageText>
            <m:ResponseCode>ErrorInternalServerError</m:ResponseCode>
            <m:DescriptiveLinkKey>0</m:DescriptiveLinkKey>
            <m:MessageXml>
              <t:Value Name="InnerErrorMessageText">Too many concurrent connections opened.</t:Value>
              <t:Value Name="InnerErrorResponseCode">ErrorTooManyObjectsOpened</t:Value>
              <t:Value Name="InnerErrorDescriptiveLinkKey">0</t:Value>
            </m:MessageXml>
          </m:FindItemResponseMessage>
        </m:ResponseMessages>
      </m:FindItemResponse>
    </s:Body>
</s:Envelope>
</Trace>
The account is used for other purposes as well - looking into other calendars. And I have seen this limitation before and read that it is a timing issue.
I guess I need to use another account ...

Default assignment operator not created

I am updating a large old C++ MFC program to VS2013.
Several classes are failing to compile with C2248 errors, because the relevant default assignment operator has not been created.
Attempting to force the creation of the default assignment operator using =default; results in C2280 errors saying that the affected classes are attempting to use a deleted function.
Does this mean that the compiler is refusing to create the default assignment operator? If so, why would this be? There is another assignment operator explicitly defined in the class, but that one is for objects of the base class.
TD

The program works when compiled with VC5 in VS97 but not when compiled with VS2013.
I am fairly sure that the derived class assignment operator is used, because I can see data items being copied that are not included in the code for the base class assignment operator.
Here are some code snippets which show the structure of the code:
// Base Class
class CAuxIO : public CObject
DECLARE_SERIAL(CAuxIO)
public:
enum eTypes { eNotDefined=-1, eKeyboard=0, eSerial, … };
CAuxIO();
virtual ~CAuxIO();
virtual CAuxIO& operator=(const CAuxIO& rai);
void CopySettings(const CAuxIO& rai);
// Assignment Operator
CAuxIO& CAuxIO::operator=(const CAuxIO& rai)
if(this!=&rai)
m_iType=rai.m_iType;
m_iIndex=rai.m_iIndex;
CopySettings(rai);
return *this;
// Derived Class
class CAuxInput : public CAuxIO
DECLARE_SERIAL(CAuxInput)
public:
CAuxInput();
virtual ~CAuxInput();
virtual CAuxIO& operator=(const CAuxIO& rai);
protected:
CObArray m_DigInSignalArray;
// Assignment Operator
CAuxIO& CAuxInput::operator=(const CAuxIO& rai)
if (this != &rai)
CAuxIO::operator=(rai);
return *this;
// Typical Derived Class
class CAuxInputKeyboard : public CAuxInput
DECLARE_SERIAL(CAuxInputKeyboard)
public:
CAuxInputKeyboard();
virtual ~CAuxInputKeyboard();
virtual CAuxIO& operator=(const CAuxIO& rai);
// Assignment Operator
CAuxIO& CAuxInputKeyboard::operator=(const CAuxIO& rai)
if(this!=&rai)
CAuxInput::operator=(rai);
CAuxInputKeyboard* p=(CAuxInputKeyboard*)&rai;
m_bSeparateArchive=p->m_bSeparateArchive;
return *this;
Example of the problem.
*pci and *pciNew have static types of CAuxInput but run-time types of a derived class
which has an explicit Assignment operator.
while(pos)
CAuxInput* pci=(CAuxInput*)rcl.GetNext(pos);
int iType=pci->GetType();
if(((-1)==m_iType) || (iType==m_iType))
CAuxInput* pciNew=rcl.NewAuxInput(iType);
if(pciNew)
// The following line causes C2248
*pciNew=*pci;
m_cAuxInputList.AddTail(pciNew);
TD

Error on nexus 7k series " operation failed.the fabric is already locked"

getting following error on nexus 7k series switch: error is " operation failed.the fabric is already locked", while removing ntp commands (no ntp server 10.101.1.1) from switch. Please help.

I had the same error message, only in my situation Outlook would only open successfully every 4 or 5 attempts. When Outlook would open (versus just hanging at the splash screen), I would get two dialog boxes with the warning/error message.
After I clicked okay I could get into Outlook.
Previously I experienced this problem running my Office 2010 client with my Exchange 2007 mailbox on my old laptop. The problem followed my mailbox through an Exchange 2010 migration (so new Exchange org), client upgrade to Outlook 2013, and a new
laptop (so I knew it wasn't a corrupt profile). This led me to the conclusion that it was a corrupt item(s) in my mailbox.
To resolve the issue, I archived *everything* in my mailbox to a PST file, ran SCANPST to fix the corruption, and then uploaded everything back into my Exchange mailbox one folder at a time, stopping after each folder to close and restart Outlook so I could
narrow down which folder had the corrupt item if the problem recurred. I'm happy to say my issue is now resolved.

Send and Recieve Error code " Receiving reported error (0x80004005): The operation failed"

This is what is happening after installing 2010 on to a computer that was running 2007 Outlook. Currently using Office 365 so everything is on the cloud but when the user sends one or two emails the error on the bottom of outlook says send and receive
error. Then a pop up dialog box comes up with the following error
Receiving reported error (0x80004005): The operation failed
Does anyone know how to fix this
Nexusxox

Hi,
Glad to know that you have found the solution.
Thanks for your generous sharing. Have a nice day : )
Thanks
Mavis
Mavis Huang
TechNet Community Support

Outlook 2010 / Exchange 2013: The operation failed. An object could not be found.

Both KB2956128 and KB2956203 causing issue. Removing the patch fixes the issue. I need to know what the best way to remove the patch remotely is. Maybe a SCCM job with this:
msiexec /I {90140000-0012-0000-0000-0000000FF1CE}MSIPATCHREMOVE={DEFF916D-4268-49CF-8FF3-E26253582E13}
msiexec /i {90140000-001A-0409-0000-0000000FF1CE}MSIPATCHREMOVE={DEFF916D-4268-49CF-8FF3-E26253582E13}
Please advise. Also looking for time frame for a fix to be published or these updates are rolled back/pulled by Microsoft. Thank you.
Also this is being reported by multiple people with no resolution. Example:
http://community.spiceworks.com/topic/790986-outlook-2010-bug-the-attempted-operation-failed-an-object-could-not?page=1

Hi,
Thank you for your feedback and apologize for the inconvenience caused.
We have heard several reports regarding issues caused by KB2956128. We've escalated this issue, but we're not sure whether and when there will be an hotfix for this issue. Please look out for our official blog articles and install
all available updates released.
Thanks for your understanding and support.
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Error: Load operation failed for query 'GetAuthenticationInfo'. The remote server returned an error: NotFound.

Hello,
I have a lightswitch web-application in development, which I need to copy from one computer to the other. I have tried doing it both through Git and by simply copying the solution and opening the project on another machine. The project builds without errors,
but when I try to debug it, it opens a web-browser, loads to 100% and pops up an error - Load operation failed for query 'GetAuthenticationInfo'. The remote server returned an error: NotFound.
Now, I have tried repairing Visual Studio on my machine, reinstalling .NET framework and setting <basicAuthentication enabled="false" /> in web.config, yet it still does not run.
When using Fiddler, it shows an error while loading the application - "HTTP/1.1 500 Internal Server Error" , which I honestly don't know what it means.
The application uses ComponentOne and Telerik modules, but they are both installed on both machines.
The application does run perfectly on the original machine, but it is not working on any other one.
Both machines are using Win 8.1 and Visual Studio 2013 Update 4.
I have tried to look this up online, but most people's problem are when they are deploying the app, not just debugging. I would be really happy for any help with this issue.
Thanks!

I have the same problem on one of my development machines. Whenever I create a new project, the System.IdentityModel.Tokens.Jwt nuget package is not referenced properly. The project compiles correctly but you are not able to debug as I get the same error
as you.
If you open up your references and there is an error next to any of your references make sure that you correct them. In the case of the jwt reference error, I have to remove the jwt reference and then add it back from the packages folder.
This may not be your problem but could point you in a direction?

Verify operation failed and Runtime Error While using Adobe Reader 10.1.2

We have installed Adobe reader 10.1.2 on Windows Servers 2008 and user are accessing its using Citrix.When users open PDF files they are getting message "Verify Operation Failed" and also getting error "Runtime Error"
even on one server we updated the version to 10.1.3 but still they are getting same error.
Pdf files open up but after multiple attempt..
Error are provided below

Hi, I have been using Citrix on Server 2008 for quite soemtime. And have not seen any such issues with Reader 10.1.2 and 10.1.3
Can you provide the event viewer log ? Also is the same issue seen while opening PDF in the Citrix Server ? Or it is mainly seen while Citrix Users accessing the published Reader app via Citrix Web URL ?

Error while assigning Operating concer to Controlling Area

Hi...
while I am trying to assign operating concern to controlling area, the system is showing the following error message.
Diagnosis
Controlling area 7500 and operating concern 7500 have different fiscal year variants (01 and K4). However, for cost center assessment, settlement, and many other types of postings to Profitability Analysis, the controlling area and the operating concern must have identical fiscal year variants, otherwise error messages or serious data inconsistencies can occur.
But i already changed fiscal year variant from K4 to 01 in Operating concern and i run the generate operating concern environment also. still the system is showing the same error message.
Is there anything more i need to do after changing fiscal year variant in Operting concern.
Please help me.
Thank you,
Regards,
Santosh

I have got the solution.
Thank you,
Regards,
Santosh

Error while saving BPM Project to MDS: BPM-70801 : Metadata operation failed

Dear All,
I am working on BPM 11g.
I installed the following products for BPM 11g
OS: Windows 7 SP1 Professional Edition all with 32 bit
Installed s/w:
    JDeveloper 11.1.1.6.0 Generic Version
    OracleXE 11.2 Win32
    ofm soa generic 11.1.1.6.0
    wls 10.3.5
    RCU 11.1.1.6 for schemas dev_soainfra, dev_sdpm and dev_mds - Utility run successfully.
Overall Installation is successful wth no issues.
Configuration of Weblogic server for domain is ok with admin server, soa_server1 and bam_server1 with test connections is ok.
I am using browser as Internet Explorer 9
In Jdeveloper 11.1.1.6.0 after creating application, project and process
From BPM MDS Navigator I configured the connection for Database 11g XE as well using
Override Application Server user/password
For SOA MDS I included the dev_mds user with MDS partition as obpm
tested connections all ok (weblogic and soa_server1 up and running)
In Jdeveloper I am able to export the BPM successfully.
In the BPM Project Navigator when I use the Project --> SalesQuote.jpr --> right clicking with
option as Save to BPM MDS the following error is occured as
"Error while saving BPM Project to MDS: BPM-70801 : Metadata operation failed".
If the error is resolved than I can see the project in BPM composer.
My queries on this error are
1) Has soa_server anything to do with this error
2) Is dev_mds schema to be reviewed
what can be the possibility to resolve the BPM-70801 error.
Please provide the solution ASAP or send me the reply to my [email protected]
Regards
Ajaz Ahmed

Hello Ajaz,
BPM-70801 is a very generic error that can have multiple causes. Please provide the error log from servers log file. From what I understand, you are using a separate soa_server1, so watch out /your_domain/servers/soa_server1/logs/soa_server1.log
Regards
km

Assignment Operation failed....

Similar Messages

Maybe you are looking for