Assistive Touch Circle covers the 2X Circle

Assistive touch will allow my disabled grandson to go home (he doesn't have the strength to use the home button). However, when enabled, the assistive touch circle covers the circle that allows him to enlarge the iPhone apps to full screen on the iPad. He really needs BOTH circles available. Any suggestions?

Thank you! My grandson is feeling much more independent now that he need not ask for help everytime he wants to "go home."
Thanks to you for helping me figure this out and thanks to Apple for caring.
Nana Barb

Similar Messages

  • IPhone 5. My on-off button rarely works. I can power off with assistive touch. Is there a way to power on with assistive touch, given that the icon disappears?

    My on-off button rarely works. I can power off with assistive touch. Is there a way to power on without the on-off switch?

    Depending on what you mean by power off.  If you mean putting the phone to Sleep, you can tap on the Home button to bring it back. If you turn it off completely, then the only way to turn it on is to use the physical Power Button.

  • My Ipod has a broken power button and the shuffle on assistive touch made my ipod frozen...its been frozen for hours

    So...I was doing homework on my Ipod then this happened...I clicked shuffle on assistive touch on accident instead of clicking screenshot.Well my IPod suddenly freezes on the assistive touch menu with the gestures,shuffle,screenshot,and multitasking.Im having a really bad day...i just need my IPod back before my homework is due!By the way my power button is broken so i cant reset

    Try:                                               
    - iOS: Not responding or does not turn on           
    Ignore the reset and when it says place the iPod in Recovery mode
    Place the iPod in recovery mode using one of these programs:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    or
    http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:       
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • Can we customize assistive touch options?

    Can we customize assistive touch options? Eg- When the assistive touch is enabled the 3 circled icon is displayed in screen. It shows fav, home, device and siri. Can we bring multitasking option to the front screen where-in it’s in device-more-multitasking. I mean can be replace any of option(Fav, siri, home device) with multitasking.

    To a certain extent, yes. Read here:
    http://iosguides.net/how-to-use-assistive-touch-on-iphone/

  • How do I access my iPod Touch (5th Generation). Broken Home Key, Locked Screen, No assistive touch currently off and no access to itunes on original PC.

    So a friend had damaged her iPod touch by dropping it some time ago. It has been sitting in her drawer ever since (she got a new device). It is now out of warranty and she said I could have it, but only catch is i'd have to fix it some how.
    Problems are:
    1) iPod is locked - She doesn't know the passcode it was set to.
    2) Home key broken - Unable to do a reset as per the many links I see online.
    3) Assistive touch is off - Unable to turn this on as the phone is locked and I can't unlock it.
    4) We no longer have access to the original PC that it was sync'd with. I've managed to get it linked to my itunes but can't do anything with it do to the fact it won't let me as iPod is locked.
    So basically it almost seems there is nothing that can be done but would appreciate your help if possible. Ideally if I can get it unlocked without losing the data so I can keep the music that is on there it would be good. If not then a full reset is fine.
    Can this be done? Can we turn on assistive touch without unlocking the phone and no home key? Please help,

    Place the iPod in recovery mode using one of these programs:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • Assistive touch rotation not working

    I'm trying to use assistive touch to rotate the iphone screen to put it upside down because there's a spot that isn't working.
    But for some reason, pressing invert isn't doing anything at all. rotate left/ right and back to normal does work.
    I fouind the exact same issue in 3 other iphone 4 witch I could put my hands on.
    Is this a known issue? Is there any alternative or fix?
    i'm on ios 5.1.1 on an iphone 4

    Confirm that settings-->screen rotation-->Rotation lock is set to OFF
    If it is already then try a Soft Reset : Press and hold Power + Volume(down) keys until the phone vibrates (about 8-10 seconds).

  • Does siri work with assistive touch

    is it possiblie to start siri by assistive touch?

    For the 4S there actually is a siri selection just above the home button!

  • Ios 7 laggy or choppy when assistive touch on

    is it normal? my ipod touch was really stable and smooth (except when choosing the stills image on settings, but i think its a frame rates problem), i got no trouble like laggy or anything, but when i turned on the assistive touch, it makes the entire system to be choppy, laggy. i dont know is it the hardware problem or software, but it run really smoothly when the assistive touch was off, the only way is removing the transparency to get the smoothness, but iwant that feature.
    Please tell me what is going on

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             

  • My ipod 4th gen home button is stuck when i press it it dosent work so how can i fix it? i dont want to use assistive touch

    please i need help now and fast thank you

    Try:
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Assistive Touch Pinning Bug

    If I pin the Assistive Touch icon to the lower left corner of my iPad 3 running iOS 6, it stays pinned in the lower left hand corner when I rotate the iPad.
    The same is true if I pin it to the upper left hand corner.
    However, when I pin the icon to the lower right corner or upper right corner, when I rotate the iPad, the icon won't stay pinned to a corner; it winds up about 2/3 of the way down the display.
    I have found the lower right corner to be the least intrusive place to pin the icon, so would be great to see this resolved. Really like Assistive Touch and would be great if this got fixed.

    Like me, perhaps you just need to understand the Assistive Touch Menu  better - I could not work out for ages how to get the 'dot' to disappear from the screen. Then I discovered that there is an option to triple click the home button to switch the 'dot' on and off.
    I think there is also an option to make the choices come up more or less quickly ..
    Though i still havent worked out how to Lock Screen with a single touch rather than 3 separate clicks
    Check out
    http://support.apple.com/kb/HT5587

  • I played both assistive touch and voiceover ....and I can't push my password because of the circle please help

    I can't push password number 1 and 4 because between these numbers there is a circle for assistive touch and also I played voiceover so it's difficult to push the numbers

    Gift cards are country specific.
    They can only be used inside the borders of the country of issue.

  • Picture display without covering the circle behind

    Dear All,
    I'm having a great difficulty to display a picture without covering the 'circle' behind. I have a circle at the center of the monitor. The circle is draw by draw circle .vi. After certain time, a picture is displayed at the center. But the circle behind is required still to be shown. I used the .jpg read, etc... to display the picture. When the picture is on, however, it covers up the 'circle'. I can't accomplish this by re-drawing the circle on top of the picture due to timing sensitivity issue of this research. Could you please provide suggestions? Thank you so much!
    Yonghe
    Solved!
    Go to Solution.

    RavensFan,
    Thank you for the quick reply. Your suggestion led me to a solution by following this link:
    http://forums.ni.com/t5/LabVIEW/Overlapping-transparent-picture-indicators/td-p/432398
    Thank you again,
    Yonghe

  • [CS4/JS]: Draw three touching circles

    This little javascript just might be useful; perhaps not for everyone, though 
    Select a triangle (either closed or open, doesn't matter; as long as it has exactly 3 anchor points) and run this script. It'll draw three thin-lined circles with their centers on the triangle points, and their radii adjusted so all three of them touch each other.
    Copy, paste into a plain text editor -- Adobe's own ESTK Editor is good -- and save into Illustrator's Scripts folder, or anywhere else (but then you'd have to browse for it every time you want to run it). Save as "draw3circles.jsx" -- when saved in Illy's Scripts folder, it'll be visible next time you restart Illustrator.
    Select a triangle, run the script. If you don't have a valid selection, it'll do nothing at all.
    //DESCRIPTION:Draw Three Touching Circles on a Triangle
    // A Jongware Script, 30-Sep-2010
    if (app.documents.length > 0 && app.selection.length == 1 && app.selection[0].hasOwnProperty("pathPoints") && app.selection[0].pathPoints.length == 3)
         p1 = new point (app.selection[0].pathPoints[0].anchor);
         p2 = new point (app.selection[0].pathPoints[1].anchor);
         p3 = new point (app.selection[0].pathPoints[2].anchor);
         dc = p1.distance(p2);
         da = p2.distance(p3);
         db = p3.distance(p1);
         ra = da - (da + db + dc)/2;
         rb = db - (da + db + dc)/2;
         rc = dc - (da + db + dc)/2;
         black = new GrayColor(); black.gray = 100;
         if (ra)
              e = app.activeDocument.pathItems.ellipse (p1.y+ra,p1.x-ra,2*ra,2*ra); e.strokeWidth = 0.1; e.strokeColor = black; e.fillColor = NoColor;
         if (rb)
              e = app.activeDocument.pathItems.ellipse (p2.y+rb,p2.x-rb,2*rb,2*rb); e.strokeWidth = 0.1; e.strokeColor = black; e.fillColor = NoColor;
         if (rc)
              e = app.activeDocument.pathItems.ellipse (p3.y+rc,p3.x-rc,2*rc,2*rc); e.strokeWidth = 0.1; e.strokeColor = black; e.fillColor = NoColor;
    function point (arr)
         this.x = arr[0];
         this.y = arr[1];
         this.distance = function (pt) { return Math.sqrt ( (this.x-pt.x)*(this.x-pt.x) + (this.y-pt.y)*(this.y-pt.y) ) };

    I don't know yet what I might use it for, but it's fun! Give me a couple of hours...
    Thanks,
    Peter

  • How can I disable the assistive touch programmatically ? This is like a bug. Though the Guided access is enabled a user can take screenshot of my application content. How can I solve this ? any idea ....

    How can I disable the assistive touch programmatically ? This is like a bug. Though the Guided access is enabled a user can take screenshot of my application content. How can I solve this ? any idea ....

    Question: Do you think the response from the support staff is correct? I mean, surely, I can't be the only CF user on a shared box whose other users need to modify the date and time within their applications. Even if they do it at the application level for their domain, surely it wouldn't affect mine, would it? That was what was implied by the support people, but I have a feeling they are way off, or covering for some goof-up on their end. I struggled like hell yesterday trying to get this to work and I did not get very far at all.
    I found an interesting tutorial here which does a comparison of time zones and, theoretically, this might do the trick. But if what the guy told me was nonsense then I won't bother with it. For the record, our calendar has been working fine for about a week now.

  • Is there a way to set the control panel in assistive touch?

    I have a survivor case on my iPhone 5 and it is difficult to pull up the control panel from the bottom. Is there a way to set the control panel to pop up through assistive touch? If so how?

    Is there a way to set the FOLDERS window in Adobe Bridge as a Column view like in Mac OSX Finder?
    No, but it is very nice idea, add it to the feature request page:
    http://feedback.photoshop.com/photoshop_family/

Maybe you are looking for

  • Error in running a order import concurrent program

    Hi, Please tell me what type of error is this ,i am using user 'operations',and i have inserted data to the interface table successfully but while running the concurrent program ,i am getting this error. Cause: FDPSTP failed due to ORA-20100: File o0

  • Error when double clicking any field in Alv grid

    Hi All, I have created a custom container. To that custom container I am displaying an alv grid with all editable fields using oops concept. Hence when I am double clicking on any on the field of the table I am getting a dump " an exception condition

  • VAT on Down Payment in Indonesia ***URGENT***

    Hi, In Indonesia, We are Calculating VAT (Input Tax Credit) on Down Payments and when the Invoice is Raised we are Calculating  VAT (Input Tax Credit) Only on the remaining amount For Eg. 10,000 IDR VAT calculated on Down Payment and on invoice, norm

  • Table maintanence - display more fields

    Hi everybody, I had a TABLE MAINTENANCE GENERATION  transaction for my ztable Now my problem is I want to display 5 more fields which are already in my ztable in my transaction(table maintenance generated) these fields must be editable I meant when I

  • Pls help, nokia N80 wont work :(

    My phones bust so just got a phone from a friend. Got the N80, i can recieve texts and phone calls. And also make phone calls. The onlny thing i cant do is send texts. When i send it it comes up with a message saying "unable to send message" I really