Associate 2 Standard Tab Sets to the same application page

Can you associated 2 Standard Tab Sets to the same application page and only have one of the Standard Tab Sets display based on an item value on that application page?
Thanks,
Dan

Hi Dan,
to my knowledge you can't do that, because you can only assign one tab set with the page property "Standard Tab Set".
But how about just creating one tab set where you conditionally display the tabs which are matching?
Patrick
My APEX Blog: http://inside-apex.blogspot.com
The ApexLib Framework: http://apexlib.sourceforge.net
The APEX Builder Plugin: http://sourceforge.net/projects/apexplugin/

Similar Messages

Can't grasp the relation between tab set, parent tab, standard tab set and standard tab

Very novice to apex application building, but after trying to figure the concepts behind the tab sets I'm getting more and more confused about it as I always get different behaviour when changing things.
The documentation is not very clear on this.
Is there someone who can explain this in a comprehensive way?
It would be nice to have a view on the consequences of using these different levels of groupings.
Any help will be dearly appreciated ;-)

Jan
One level tab application
Tabsets are used to group standard tabs.
Use full when splitting up the application in different sections. Much like how the apex is split up in the application builder, sql workshop, team developend and administration.
Parent tabs aren't used. And a one level tab application can't be turned into a two level tab application.
Two level tab application
Parent tabs belong to only one tabset "main".
The standard tabset is the connection between the parent tab and standerd tab.
There is one standard tabset for every parent tab.
The standard tabset in the two level application has the same function as the tabset in the one level application.
The standard tabset also determines when a parent tab is current.
When on the page the setting Standard Tab Set is set then the parent tab belonging to that standard tabset is current.
This means that if you change a page form one parent tab to an other you not only need to change the tab settings. But also the settings on the page.
If you still in the position to choose between list or tabs as your main form of navigation I would recommend using lists.
The possibilities with the list templates are greater that with tabs.
Tabs have a maximum of two levels. List don't have such a limit.
If you created your application as a one level tab application you can't turn it in a second level application without some serious hacking.
Clicking on a standard tab submits the page and branch after the computations. This could also be viewed as a pro for tabs because with list navigation your page needs to be accessible by url. Did isn't necessary with standard tabs making them more secure. Parent tabs also use an url to navigate.
Only the standard tabs belonging to the current standard tabset are rendered making a drop down menu impossible.
Hope this clears up some of your questions.
Nicolette

How can I set the page that will open, when I open a new tab, to be the same as the homepage?

How can I set the page that will open, when I open a new tab, to be the same as the homepage?
An app changed it to some other search engine, before installing the app, I the tab that would open was the homepage I set.
In my case it is Google, and I want my new tabs to open on Google like they did before the installation.
thank you,
Asaf Privman.

You can middle-click or Ctrl left-click the Home button on the Navigation toolbar to open the Home page in a new tab.
You can look at one of these extensions:
* NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/
* New Tab Homepage : https://addons.mozilla.org/firefox/addon/new-tab-homepage/

How to switch between 2 windows of the same application using Cmd+Tab

Hi,
I am using my mac now since about 10 months. I was used to work with Linux and Windows XP.
Something I am badly missing on mac os x is the possibility to switch between 2 windows of the same application using cmd + tab just like it simply works for Linux and Windows (and maybe many other OS out there!).
Very often I have 2 text files open in 2 editor windows (e.g. TextEdit) and need to copy and paste text from one window to the other. I was used to simply use ALT+TAB. But here I have to get my right hand away from the keyboard and use the mouse to change the focus from one window to the other and then use the mouse again to get the focus back to the previous TextEdit windows.
THIS REALLY *****!!!! It makes me crazy. I cannot believe that such a "modern" OP does not support this action. I must be doing something completely wrong or did not understand the mac correctly. Right?
Does anyone have an idea how I can get mac to do something all other operating systems so easily do?
Thanks
Quartz84

Hi Kappy,
well what you are saying is obvious to me. This is not the point for me and not what I wanted to know. But I think you answered my question anyway: OS X is unable to switch between windows of the same application as I mentioned in my example.
WHY NOT???
Every other OS is able to differentiate between windows and not just applications.
Another example: The Mail application and an Email editor window. When you are writing an Email and you want to switch to the main window of the Mail application to read something you must again use the mouse!
I mean Apple seems to be "somehow" using FreeBSD in the background and even in FreeBSD's window manager it is possible to switch between windows of the same application.
Well, in the Apple world it is always the pour user who is not intelligent enough to understand Apple's philosophy ;-(
To me this is not modern, it is simply a weakness of the OS.
Cheers
Quartz84

In OS X Mavericks, can I run the same application across two monitors?

I'm an artist. I use programs like Photoshop across my iMac screen to my Wacom Cintiq screen all the time. It's vital for my workflow to have the same application running on both monitors. Art on the screen I draw on, menus, reference and what not on the monitor. Basically an extended desktop. I read in a few reviews when Mavericks was first released that Apple removed the extended desktop from the standard dual monitor set up. The only information I can find on this subject has to do with Airplay, which doesn't fit my situation at all. Before I upgrade to Mavericks, I need to know I'm not going to be crippling my workflow. There are a lot of features that I was looking forward to in Mavericks that could help me out a lot, but the big removal of my most used feature has kept me away for months. Any help I can get would be welcome. I appreciate it.

I run dual 21.5" monitors and Extended Desktop Mode works fine in Mavericks.
I don't use Photoshop, but Pixelmator and other App's with independent toolbars work great in both Windowed and Full Screen Modes.

How can I stop two instances of the same application?

I have just installed Yosemite about a week ago on my MacBook Pro mid '10 and it's working great except for one little glitch.
Whenever I double-click on a file in my Finder, not only does it open in the assigned dock Application, but a second instance of the same Application pops up on the dock out of nowhere. To be more clear, I have my PDFs set to Preview. I click on a PDF in my Finder and Preview starts jumping. Out of nowhere, another copy of Preview springs up on the dock and starts jumping as well. This opens that same PDF twice on my screen.
I noticed this also happens when I'm installing a .dmg file. Two installers open at the same time when I double-click the icon.
It doesn't happen if I right-click > Open or right-click > Open With.
Any thoughts?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

How to make the new tabs to open the same URL as the startup page?

Hello!
I was wondering if it's possible to configure the Firefox in such a way that the new tabs open exactly the same URL that is typed in the Options. I tried to set browser.newtab.url to about:home but it gives me Firefox Google custom page instead of the startup page that I've set in the Options. Another way I tried is to set the browser.newtab.url value in about:config to the same URL as the startup page URL, but then if I change the URL in the options the new tab URL is not changed. So the question is whether it's possible to make the Firefox read the URL that is used for the startup page and go there when opening a new tab.

You can use a addon or about:config
<h2>Addon</h2>
* https://addons.mozilla.org/en-us/firefox/addon/new-tab-homepage/‎
<h2>About:config</h2>
# In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''', to continue to the about:config page.
# Enter '''browser.newtab.url''', double click the result.
# A new window should now show, enter your homepage url in the box, then hit ok.
# Open a new tab, does it work.
If prefs arent saved you need to read the [[How to fix preferences that won't save]] article.

Moving thru windows in the same application

Hi everybody. I guess this is a question somebody should already have done but I can't find it in the search.
I would like to know how can I move thru windows in a application. Something like pressing APPLE-TAB but in the same window.
Everythime I move inside a window it get's very frustrating to be going in the "Window" menu and search for the window I need...
If isn't there a way to do that is there a way to put the current active application in top of the others?
Thanks,
Rasael

In addition to Edwin's advice which is the way I do it, you can click and hold on the application icon on the dock and then choose the window you want.
-mj
[email protected]

Parent Tab and Standard Tab set

What is the difference between above three - i.e. Parent Tab, Standard Tab set?
I understand Parent Tab is the master level Tab, but not sure what is different between Standard Tab Set and Parent Tab? It seems like interchanging of terminology to me.
Thanks
Rich

Thanks Jari, In the link given, there is a point which I have pasted below.
6. Go to page “Display Attributes“, Select page template to “Two Level Tabs” and Standard Tab Set, in our example it is “TS1(page 1)”How do i go to this "Display Attributes" page?
Thanks,
R

Quickly switch windows of the same application

Hello,
when I have a lot of applications open, I can use Command-Tab to quickly switch between applications and this is working great. I am looking for a similar functionality to quickly switch between windows of the same application. For example, I have 10 Safari windows open. I am looking for a keyboard shortcut to switch between all open windows of Safari (like you can do with Command-Tab for applications).
I know I can use Expose but this is not convenient. I also can do "click and hold" the application icon to do Expose just on the specific application but if you have a lot of windows open, it is not easy to find the one you are looking for. A keyboard shortcut to loop through open windows in an application would be better.
Any idea?

It depends upon the application. But command-tilde will move you to the next window and command-shift-tilde will move you back in many applications (including Safari).
charlie

How to active more than one front panel in the same application ?

Hello,
I want to active several front panels in the same application. I am a recent labview's user and it's difficult to solve this question.
Thanks for your help.
Regards

But, each VI, including each subVI has a front panel. If you want several front panels, that implies using several VIs. The top level VI will call the appropriate subVI. Each subVI that you need as a UI can be set to 'Show front panel when called' and 'close afterwards if originally closed'. These settings can be accessed through popping up on the VI's icon and selecting VI Properties..., then selecting Window Appearance, then selecting the customize button or the dialog radio button.
Hope that this helps,
Bob
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]

HT204053 i am having iphone3gs and ipod4s, is it possible the application that i have purchased in my iphone can be available in my i pod by doing payment only one time for the same application in my i phone...if yes,plz let me know hw it is possible

i am having iphone3gs and ipod4s, is it possible the application that i have purchased in my iphone can be available in my i pod by doing payment only one time for the same application in my i phone...if yes,plz let me know hw it is possible..

Open the App Store on your device.
Make sure you are signed in with the same account used for the original purchase.
Tap on Purchased from the bottom navigation bar.
On iPhone or iPod touch, tap Updates from the bottom navigation bar, then tap Purchased.
Locate the app in your Purchased tab.
Tap the download button (cloud symbol)
See also: http://support.apple.com/kb/HT2519?viewlocale=en_US&locale=en_US

How do multiple developers share the same application module

Is there a suggested method for multiple developers to share the same application module? We have 2 developers that will have EOs in the same directory and would like to know how they can share an application module but do development on different pieces of a project.
Thanks,
Paula

Try using CVS or any other source control system. Still there are some points to think about before doing big projects, because there are many files which are updated by JDEV without knowledge by the developer. This causes many conflicts using a version control system like CVS.
If you developers both are working on the server part of the application, I suggest using multiple application modules. See this blogs:
http://radio.weblogs.com/0118231/stories/2005/05/27/howGranularShouldMyApplicationModulesBe.html
http://radio.weblogs.com/0118231/stories/2005/07/19/nestedApplicationModules.html
On the client side it depends on which technology you are using (struts, swing, jsf, ...).

I've done everything I know in order to get my calendar in iCloud synchronized with my macBook, my IPad and my iPhone, but get no success. I've checked if all devices are set to the same account. Can you help me?

I've done everything I know in order to get my calendar in iCloud synchronized with my macBook, my IPad and my iPhone, but get no success. I've checked if all devices are set to the same account. Can you help me?

The only thing I can see strange is that when I login my iCloud account through my principal email address, when I check my preferences is marked an @me.com address that is old and I don't use it anymore, but I can't erase it or even change it.

Using EE and XE in the same application?

After reading the license, it doesn't appear that there is any stipulation against using XE databases alongside an EE database within the same application.
I have a business app which runs with a centralized database, but clients in many geographically dispersed locations. The idea has been bumped around lately of trying to cache data locally to speed things up. The approach is not so much replication, but of acquiring modification priveleges from the central database, making a copy of the relevant data to a local one, and working with it there for a time. Modifications are then copied back into the central database. This scheme would be aimed at improving response times, and also helping increase the scalability of the overall application. (And yes, our applicaiton adheres strongly to the principle of locality.)
Thus far, we acquired licenses to BerkeleyDB in order to implement these local data repositories. Oracle XE seems like a more effective route because it presents the immediate benefit that the application would not need to have it's OCI code changed..
Given that XE supports replication as a client, I hope that this sort of thing has already crossed the minds of Oracle and that it is an acceptable use of XE?

I am not from Oracle but I cannot see anything in your use case that would violate the license agreement. The usage of XE is free for any purpose and you are allowed to use database links, export / import and even create materialized views from another oracle database directly.
Regards,
~Dietmar.

Associate 2 Standard Tab Sets to the same application page

Similar Messages

Maybe you are looking for