Associate a password to an image

Hy, i would like know if it's possible associate a password to an image in java in such way that I need the password when i open the image in a second moment. Thanks

Well, you can't force the operating system to behave differently. As long as your pictures are in their normal format, opening them depends on the OS.
You may create your own encrypted picture format, which can only be decrypted with your java program. But I doubt this would be worth the trouble...

Similar Messages

Trying to create a password protected disk image in 10.8.4

Trying to create a password protected disk image in 10.8.4. I follow steps in Apple:Support but I get an error saying "Resource busy"?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

How Can I Password Protect An Image Field

Is there a trick that you know of to password protect an image field?
I have an image field, Only few directors allowed to use it.I want to restrict others from using it.

I put a button beside the image field that teh user can click to activate it. On the Initialize event of the Image field set the access to "readOnly" (ImageField1.access = "readOnly". Then on the click event of the button use code like this:
var pswd = app.response("This image is protected by a password. \n Please enter a valid password.");
if (pswd == "password"){ ImageField1.access
= "";} else
{ app.alert("You entered an invalid password!")
Paul

Version doesn't work on external password protected disk image

Version doesn't work on external password protected disk image.
Any ideas?

Hi
Did you assign the external monitor as a primary display in the graphic properties?
I think you did it due to the fact that the Toshiba boot display appears on the external monitor.
But just moment please. The Tecra M7 was delivered with the Win XP Pro tablet edition and not with Vista.
Did you install it at you own hand?
I presume everything has worked running Win XP
Maybe you should try remove the graphic driver from the Vista system and use one from the 3rd site like www.laptopvideo2go.com

USB Flash Drive (with password protected Disk Image) copies files very slowly. Why?

I'm backing up some data onto a 32GB flash drive that I've put a password-protected Disk Image onto, and am copying this data into, but it is achingly slow. It's taking hours to copy just 500MB!
I have another 64MB flash drive that I have set up the same way, but this one copies files very quickly. I can't spot any difference between them in Disk Utility/System profiler.
For the record, the process I've used for bothe drives is reformatted to Mac OS Extended (Journaled), then created a new Disk Image onto each drive (just a bitsmaller than the maximum size of the drive to enable it to fit) with 128--bit encryption.
Does anyone have any idea why the 32GB drive would perform any differently? I am using the same USB port on my iMac for each drive, but am getting very different copying speeds. It's driving me nuts! Many thanks.

The drive seems to be working fine if I copy files onto it outside of the Disk Image file (there's about 200MB of free space left over after I added the DMG). So I can only deduce from that that it is something specifically to do with the DMG itself. Though, as mentioned, I compared the DMG on my (fast) 64GB stick and the DMG on this problematic (slow) 32GB stick in Disk Utility/System Profiler (and I originally set them up in an identical way, as far as I am aware), and they seem to be the same. But one is performing achingly slow. Even dropping a file into the mounted DMG takes a few minutes to even think about it. It's very odd.

Cannot open leopard password protected disk image

i had created a password protected disk image under leopard. Now that i have snow leopard i can't open it anymore with the right password. Since then i know that i have changed the name of the disk image also. does anyone know if either changing the name of the image or upgrading from leopard to snow leopord would explain why i cannot open the image anymore?

Neither change should matter. I suspect that the password is wrong, maybe missing a cap or lowercase item or a number. Find someone running Leopard, copy it over, and see if it'll open there.

I installed Yosemite and now my computer is slow when logging in. Also when I type my password the screen images are distorted. After that my home screen appears and everything seems normal. What can I do to fix this?

I installed Yosemite and now my computer is slow when logging in. Also when I type my password, a bar appears measuring the process and then all of a sudden the screen images are distorted. After that my home screen appears and everything seems normal. What can I do to fix this?
Here is what the etrecheck results are:
Problem description:
slow at start up, screen is distorted while logging in, it is fine after
EtreCheck version: 2.1.8 (121)
Report generated April 5, 2015 at 9:42:01 AM PDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Early 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,1
    1 2.3 GHz Intel Core i5 CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 297
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 384 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: 0:7:0
Disk Information: ℹ️
    Hitachi HTS545032B9A302 disk0 : (320.07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 318.84 GB (174.85 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 319.21 GB Online
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /System/Library/Extensions
    [not loaded]    com.devguru.driver.SamsungComposite (1.1.0) [Click for support]
    [not loaded]    com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5) [Click for support]
        /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
    [not loaded]    com.devguru.driver.SamsungACMControl (1.1.0) [Click for support]
    [not loaded]    com.devguru.driver.SamsungACMData (1.1.0) [Click for support]
Startup Items: ℹ️
    HP Trap Monitor: Path: /Library/StartupItems/HP Trap Monitor
    Startup items are obsolete in OS X Yosemite
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.ucupdate.plist
    [failed]    com.apple.watchdogd.plist [Click for details]
Launch Agents: ℹ️
    [not loaded]    com.google.keystone.agent.plist [Click for support]
    [not loaded]    com.hp.help.tocgenerator.plist [Click for support]
    [not loaded]    com.logmein.LMILaunchAgentFixer.plist [Click for support]
    [not loaded]    com.logmein.logmeingui.plist [Click for support]
    [not loaded]    com.logmein.logmeinguiagent.plist [Click for support]
    [not loaded]    com.logmein.logmeinguiagentatlogin.plist [Click for support]
Launch Daemons: ℹ️
    [not loaded]    com.adobe.fpsaud.plist [Click for support]
    [not loaded]    com.google.keystone.daemon.plist [Click for support]
    [not loaded]    com.logmein.logmeinblanker.plist [Click for support]
    [not loaded]    com.logmein.logmeinserver.plist [Click for support]
    [not loaded]    com.logmein.raupdate.plist [Click for support]
    [not loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
    [not loaded]    com.adobe.ARM.[...].plist [Click for support]
    [not loaded]    com.facebook.videochat.[redacted].plist [Click for support]
    [not loaded]    com.google.GoogleContactSyncAgent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN Hidden (missing value)
    AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Android File Transfer Agent    Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
    HP Product Research    Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
    HPEventHandler    Application (/Library/Printers/hp/hpio/HPEventHandler.app)
Internet Plug-ins: ℹ️
    o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    LogMeInSafari64: Version: 1.0.660 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    LogMeIn: Version: 1.0.660 [Click for support]
    Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    LogMeInSafari32: Version: 1.0.660 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    AdobePDFViewer: Version: 10.0.1 [Click for support]
    SharePointBrowserPlugin: Version: 14.1.0 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.7
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
         7%    ocspd
         4%    WindowServer
         1%    kextd
         0%    ps
         0%    securityd
Top Processes by Memory: ℹ️
    137 MB    Microsoft Word
    120 MB    Safari
    86 MB    ocspd
    82 MB    CalendarAgent
    77 MB    WindowServer
Virtual Memory Information: ℹ️
    310 MB    Free RAM
    1.89 GB    Active RAM
    1.55 GB    Inactive RAM
    544 MB    Wired RAM
    1.13 GB    Page-ins
    8 KB    Page-outs
Diagnostics Information: ℹ️
    Apr 5, 2015, 09:32:47 AM    Self test - passed
    Apr 5, 2015, 09:30:05 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-05-093005_[redacted].crash
    Apr 4, 2015, 01:12:41 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-04-131241_[redacted].crash
    Apr 4, 2015, 08:13:57 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-04-081357_[redacted].crash

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.

When I have firefox to remember History to remeber passwords all the images on websites are broken or blocked?

When I have Firefox set to Never remember history all the websites that I visit all have there images & videos working properly but the cons is that I always have to put in my password every time I open firefox up. So to solve this problem I had firefox to "Remember History" in order to remember all my passwords to the websites I visit & it actually worked but this had me faced with an even bigger con because now all the images & videos (Example: You Tube) does not work any more making the option useless to the point that it seems firefox is giving me the ultimatum to either remember my passwords or enjoy the internet. I want to do both so how do I solve this problem?

When you are in PB mode then you can only use the Password Manager to enter an already saved password in a form on a web page and you can't store new names and passwords.
You can only store a new password when you are in normal mode.
In PB mode the disk cache is disabled and you get a different (separate) set of cookies, so if it works in PB mode then either of these are causing this issue.
You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Password protecting iPhoto images

Is it possible to password protect some of my photos.

iPhoto doesn't have a direct way to protect certain photos.
One way I can think of is to create an encrypted disk image using Disk Utility app and create a special library on this disk image. You'd need the disk image password to mount the disk and view the library. You'd need more than one library if you have some photos that you want unprotected. You can keep those in the current location.

NCS Prime prompting for login and password after re-imaging from dvd

Dear All,
I did a re-imaging on NCS prime after which I'm getting the below error
Please help me as to what could be the reason for this error...
Please type 'setup' to configure the appliance
localhost.localdomain login: Setup
Password:
Regards,
Waseq Mohammed

Re-imaging was not successful try this process:
Restoring the NCS Database
If you are restoring the NCS database in a high availability environment, see the "Restoring the NCS Database in a High Availability Environment" section. To restore the NCS database from a backup file. follow these steps:
Step 1 To view all local repository backups, use the below command:
show repository backup_repo
Note If possible, stop all NCS user interfaces to stabilize the database.
Step 2 Manually shutdown the platform as root.
Step 3 Using the CLI, perform one of the following:
•Restore the appliance and application backup by entering the following command:
restore testbackup-yymmdd-xxxx.tar.gpg repository backup_repo
•Restore only the application backup by entering the following command:
restore testbackup-yymmdd-xxxx.tar.gpg repository backup_repo application NCS
Step 4 Click Yes if a message appears indicating that NCS is running and needs to be shut down.
Note If the restore process shuts down NCS, a restart is attempted after a successful restore. The appliance will then restart and you will have to again login and restart the dbserver, and the platform manually as root (make sure you do not start with dbclean, else you will loose your recently restored data).
The CLI displays messages indicating that the NCS database is being restored.

How Safe is a Password Protected Disk Image?

I've created a Disk Image Volume with a password on my hard drive and have placed sensitive files into it as an alternative to using File Vault. Does anyone know if there is a way that these files be accessed without the password?
Thanks,
Joe

If you created the Disk Image Volume with a Password then it cannot be acsessd without said password.
It is the same with Filevault.. You cannot make changes without a Password.....Don

Password Protected Sparse Image Has No Password Anymore

After installing Mavericks a password protected sparse disk image has no password anymore, I just click the image and the content opens. It used to ask for a password with Mountain Lion... any help?

already solved... I unchecked the "remember my password in keychain"

Associate router - password EA6300

Hi All,
I had to factory reset my EA63000 router and made the setup via my mobile device. The network is working, however I can't enter in the smart wifi page in a browser on my PC. There is a page which says 'Associate Router' which asks for the router password (not for the network password). Where can I find it? What is the default?
Thanks.
K.

If you didn't setup a Smart Wifi account look for the "local access click here" link and use the same password you did in the app.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Password and forwarding images

Every time I start mail, I am prompted for my password for my POP mail accounts. I have to type in my password, click remember my password, and when I quit mail or go back into it, it will ask for my password again! Arghh!
I have tried to delete the account and set it back up, but it still wont remember the password! ***?
Also, I am trying to forward a message with images, but the images come up as dice with a question mark? Why cant I forward images.

It is not really necessary to store them in the Gallery, you can just put them where you want and point to them using the folder icon that appears next to Image Button when you choose that type. Pointing to one out of the 3 images is sufficient, if the 3 images are in the same folder and have the correct names xxxxx_up, xxxxx_down, xxxxx_over (xxxx is the name of your choice, do not make it too long or you'll have issues with the width of the dropdown list).
I'm a bit wondering about the subject line and your sentence '... one can use an image I created in PS'.... If you are using Captivate 6 another way is to use a shape that can be converted to a button and fill the shape with the image. Difference with normal buttons is that you only have two states (automatically, you do not need to create two images): up and pressed.
Lilybiri

How big can a password protected sparse image be ?

I'd like to make a sparse image fit on a 3tB external USB 2.0 WD drive (I haven't bought it yet), can I make
one that's as big as 3tB ? (or close to it ?).
I'm backing up a drive with lots of information on it and it's going to stay at work as an
offsite backup..
Or is there a good way to PW protect such a big drive ?

With a single sparse image (not FV, which uses bands, but still quite risky) it's an all your eggs in one basket thing. Especially with a sparse image that large, if there's any file contamination, the whole thing goes bad and you lose it all. As Linc said, "as long as it's not your only backup." I woudn't trust it. Not only that, but the technology of a 3TB drive, itself, may not be that stable. You are looking at two layers of potential instability.

Associate a password to an image

Similar Messages

Maybe you are looking for