Associate text to each point in a graph

I must associate text to each point in my graph. The graph has 10000 points and annotations are very slow. How can I do that ?

Unfortunately, annotations are the only way to associate text with points in CNiGraph. If using the Measurement Studio .NET graphs is an option, there is another way to do it with the .NET graph's custom drawing services that would probably be much faster in this scenario. Let me know if that is an option for you and I can post an example.
- Elton

Similar Messages

How can I display different error bars for each point on a scatter graph?

I have a scatter chart in Numbers and I need to add error bars to the points along both the x and y axes, however, the size of the error bars for each point need to be of different sizes. Is there a way to accomplish this or is there some kind of work around to acheieve a similar result? So far the only way I can find to add error bars only allows a standard amount for each point.

I found the answer here https://discussions.apple.com/message/16440653#16441393

How to mark points on a graph

Hi All,
I want to write a program which plots data on a surface graph then
allows the user to click on the graph and "mark" points on the plot. The
program should change the color of the "marked" points on the graph.
Based on the sample code provided by "Ben" here
(http://forums.ni.com/ni/board/message?board.id=170&view=by_date_ascending&message.id=144155#M144155)...
I wrote the attached code which uses "event structure" and cursors to do
the job. I used cursor to read the X,Y,Z position of the clicked point on
the plot and store them in arrays. These arrays then were feed into a
new plot added to the graph using CWPlots3D.Add() method. However, my
code does not draw the second plot (which would show marked points in
green) nor it does not get the marked points coordination correctly. I
appreciate your help to correct the code.
Thank you,
Attachments:
change read xyz.vi ‏27 KB

Hi Trin,
I have altered your VI a little bit to get the marked points in an array. You will realize that the mouse up event is requested in a parallel loop, that's because this event doesn't get triggered ifyou drag a cursor.
All you have to do now is to make a graph from the array and create new cursors. But leave Cursor 1 always as the last one and save the past values to new cursors. But maybe you don't need to set a cursor on each marked point.
Kind regards,
Kleisi
Attachments:
3D_Example.vi ‏39 KB

I just tried to copy text from power point to a word document. Since then the word document is frozen an shows no reaction. Also can not restart word. Can anyone help me to unfreeze or recover the word document?

I just tried to copy text from power point to a word document. Since then the word document is frozen an shows no reaction. Also can not restart word. Can anyone help me to unfreeze or recover the word document?

If the PDF page content is an image (for text that'd by the image that any scanner provides) then it is an image that exports to Word.
Regardless, Adobe Reader cannot export PDF page content, cannot create PDF and cannot manipulate PDF page content.
Adobe Reader is a PDF viewer only.
Perhaps you have a subscription to one of Adobe's online subscription services.
(ExportPDF, PDF Pack, etc.)
Each of the online subscription services have their own dedicated user-2-user forums.
Easy find as there here in Adobe's Forums. Hmmm, just dumping somewhere means ... Ah well, won't go there. Miss Manners would not approve eh.
Resources for getting into a dialog with Adobe:
(other than the user-2-user forums)
~~~~~~~~~
To contact support for acrobat.com subscription services:
https://www.acrobat.com/misc/en/contact-support.html
Other links to support:
http://helpx.adobe.com/contact.html
http://helpx.adobe.com/support.html
contact Adobe Customer Care on Twitter @AdobeCare.
Phone support (for a fee - have credit card ready)
800-833-6687, Mon - Fri, 5AM - 7PM PT
Be well...

I want to set for each ponit in a graph wich color it had, how i can make that?

i want say to the graphe wich color had each point

> i want say to the graphe wich color had each point
This isn't the common usage of the graph, and in fact each point on a
plot has the same color.
You might be able to do what you want, by adding a new plot for each
point. You can also modify one of the picture control graphing examples
to take in two arrays and it could change the color as it draws the plot.
Greg McKaskle

Cannot associate with the access point error message

We just got high-speed Internet installed at our house. We have a cable coming into the house that connects to a Linksys WAP54G router in our basement. We have two Dell Dimension computers that we installed Linksys PCI Wireless G Cards into. The computer down the basement is working just fine. The computer upstairs which is directly above the router worked fine the first day. The computer got powered down and upon restart wouldn't connect again. I did a system restore and it worked fine. Windows errored out yesterday, and now even after doing a restore, I cannot get it to connect to the wireless network. The error message "Cannot Associate with the Access Point" comes up. When you search for available wireless networks, none appear. Any ideas?

Try connecting to the network using the Wireless Zero Configuration...just checkout on the right-hand side bottom of the screen pc right-click the Wireless network connetion icon...click view available wireless networks...click refresh network list...on the same list you will see Change the order of preferred networks...on top of the page click wireless networks...in preferred networks...remove each & every network...click OK. Now, once again right-click the Wireless network connetion icon on right-hand side bottom of the screen & click view available wireless networks...click refresh network list...now you will be able to see your wireless network..if its a secured network it will ask you for the wireless wep key...put in the key...where it says confirm the network key & click connect...it will be CONNECTED....and you will be able to go ONLINE WIRELESSLY!!!

How to let the user define the colors for each plots in the graph (I use LabVIEW 7)?

How to let the user define the colors for each plots in the graph (I
use LabVIEW 7)?

Hi,
Take a look at this example, it uses property nodes to select tha
active plot and then changes the color of that plot.
If you want to make the number of plots dynamic you could use a for
loop and an array of color boxes.
I hope this helps.
Regards,
Juan Carlos
N.I.
Attachments:
Changing_plot_color.vi ‏38 KB

I did a COPY of some text from a web page, and then did a PASTE into notepad.exe (Windows). The text from each line was duplicated -- on the line! Instead of "Fred", it became "Fred Fred".

I just recently installed Firefox for the first time. It seems nice and quick. The version is reported as: "10.0.1".
I wanted to save some text from a web page, so navigated to that page, selected the text, and pressed the Control-C combination to COPY the selected text to the buffer. For example, the text I selected looked something like this:
Harry
Ron
Hermione
Hagrid
Albus
NOTE: Each line of text has a small icon to the left of the text.
It is not reasonable to COPY and PASTE each line individually, as there can be hundreds of lines of data. I recall, however, that
doing a COPY and PASTE on this data into Microsoft's Excel will produce cells which have the icons included in the cell, but unfortunately one cannot can't get rid of them! At least I've never found a way to remove them, but that's another issue. :)
Once I'd done the COPY operation I switched to a Notepad window and did a PASTE operation. To my surprise, the text from each line was duplicated. It looked like this:
Harry Harry
Ron Ron
Hermione Hermione
Hagrid Hagrid
Albus Albus
Thinking that there might be something unusual about the web page I looked at the source, but it appeared "normal" -- that is, as expected.
Note: I have done this operation several times before, and have never seen this occur before.
Note: In the actual data some of the lines have quoted text in them. Curiously there is weird behavior on these lines. In some cases the entire line is shown only once. (These occur at the top of the line, and the quoted text is at the beginning of the name.)
When quoted text appears "later" in the name, in some cases the quoted text is duplicated, and in other cases the quoted text is missing altogether! I have also noticed an error with the quoted text, and so will be reporting that to the web site which generates the HTML.
Note that each line of "text" is "anchor text", so if I click on a name the browser navigates to a page for that name.
I believe that the problem is that the COPY operating in Firefox is not simply copying the visible text, but also the ALT=
Below is a sample of what the source HTML looks like:
<a class="lnk" target="_blank" href="http://details.aspx?id=Harry">
<img width="16" height="16" alt="Harry" class="tb_icon" src="http://.../Harry.gif"/>
<span>Harry</span></a>
<br/>
(Because of the true length of the lines in the source HTML, I have stripped out the actual URL of the site.)
To make sure I wasn't imaging this difference I repeated the process within Internet Explorer. In that browser I did not get duplicated data.

Try:
*Extended Copy Menu (fix version): https://addons.mozilla.org/firefox/addon/extended-copy-menu-fix-vers/

How to get the texts for each line item for Sales order in a smartform

I'm createing a smart form in which i need to display certain texts for each line item of a sales order. How can i get those??
I'm trying with the table STXH and FM read_text... but i'm not clear how and what i'm getting... can anybody pls help me.....

Hi There,
But then i will be getting only the value. i want to link that against the particular material of the Purchase Order.
Like for ex:
PO No. Material Code        Line Item        Basic        Excise       Tax       Inv Value
0000001 5000251                010               100           16         4.64      120.64
0000001 5000252                020               200           32         9.28      241.28
Can u help me on this?
Regards,
Jitesh

Illustrator breaks text at a point when importing from an EPS file?

I am importing an EPS file from a statistical software. All text strings that belong together are in brackets ( ), so the EPS file is OK. When AI creates the chart it happens that the last glyph is a new and independent text string (text at a point).
Is it possible to force AI to respect the structure of the EPS file.
Thanks,
Daniel

No.
You can only fix it afterwards.

Photoshop cs6 error "could not use the type tool because the target channel is hidden. happens when im typing in photoshop, go to another layer and then come back. can't alter text at that point

photoshop cs6 error "could not use the type tool because the target channel is hidden. happens when im typing in photoshop, go to another layer and then come back. can't alter text at that point. i really need to get thsi figured out. thank you.

You may have answered my question. I AM using the 64bit version of Illustrator CS6. I had no idea there were bugs in it that affected paths copied and pasted from Illustrator to Photoshop.
A bit more about what I'm trying to accomplish... I'm trying to follow Deke's tutorial (http://www.deke.com/content/dekes-techniques-018-creating-a-3d-pie-chart) which is already difficult since so much has changed between CS5.5 and 6, but then on top of that, I keep getting errors!
So I created the pie chart exactly as he shows and copied and pasted into Photoshop exactly as he does. Before submitting this post, though, I tried drawing just two very simple triangle shapes, copying them both and pasting them into Photoshop as a shape layer. The shapes weren't overlapping, but they were a part of the same shape layer just like the pie chart tutorial.
Thanks for your help. If there is anything else I should try before just giving up because of the 64bit bugs, please let me know.

Represent NULL point in Line Graph.

Hi;
      I am using Simple series to supply data to Graph type Line. I have a requirement to represent null data point in Line graph, where marker point for the NULL data point shouldn't be present, instead a straight line should come in between the valid points. Currently if the Data value is null, marker point is coming to 0.
How can i solve this problem using Simple Series?
I am using NW7.0; SP 9
vinod.

Please refer:
http://www.sapdesignguild.org/resources/diagram_guidelines/index.html
Reference Point:
     Chart Type Line Graph
         Do not Use it if the X axis has non-numeric values..
vinod.

Changing the text in each dataGrid row to a different color

Okay I am going to try and be as clear as possible with this,
so bare with me.
What I am trying to do is make it so that when my
arraycollection objects that I have retrieved from a web service
are loaded in (by using the "dataProvider" attribute) my dataGrid
that some sort of code will take place changing the color of each
line of text (all the objects stored in the array collection are
string types) and display each rows text in a different color.
Now after looking into it, it seems the only way to alter the
color of the text is to use some sort of style or format but it
seems it only effects text in a "textArea, textField, textInput"
etc... SOOO I figured why not create a itemRenderer that contains
one of those and put it into the dataGrid... Which I did and still
can't figure out a way to make it so you can dynamically alter the
color based on a set of rbg values stored in a array the same size
as the rowCount of the datagrid.
so I am rather stumpped in what to do.. I DON'T want to
change the background color of each row, so alternatingItemColor is
out of the question, I just want the text displayed in each row to
be a different color.... And I want all this color changing to
happen either before the data is inputted into the dataGrid
(manipulating the arraycollection some how..) or when its all
already in there, it all needs to happen in code no user
interaction.
I was thinking perhaps maybe I could create a item Renderer
object that contains the compenent (the textArea in it) and just
make a array of item Renderer objects and pass those into the
dataGrid, but I don't think that is possible.
ANY IDEAS AT ALL!! On how to change the color of the text in
each row of the datagrid to a different color would be a HUGE,
HUGE!!! help. Or any info on how to setup a datagrid listener that
listens for when a object (a row) from the arraycollection is added
to the datagrid... Perhaps I could use that info some how to my
advantage.
email me, if you like I don't care I just need a answer to
this its driving me crazy! I can change the background row color
based on a array of rgb values but I can't change the color of the
item in that row based on array of rgb values, ARG!
[email protected]
thanx in advanced.

<mx:itemRenderer>
<mx:Component>
<mx:Label color = "red" />
</mx:Component>
</mx:itemRenderer>
want to make it so I can change the color of the label on the
dynamically by calling some sort of method I have created.. is that
possible? if so coudl you please give a example, thanx!

I am so frustrated. I put ab object and/or a text box on a page and then cannot select it - the Text cursor (not pointer) is put on the object or text box and nothing happens. It is so frustrating! I then open up Everweb and the same thing,

I put an object and/or a text box on a page and then cannot select it - the Text cursor (not pointer, just the text cursor shows) is put on the object or text box and nothing happens. It is so frustrating! I then open up Everweb and the same thing, I create an object and then try and elect it to make it bigger etc and cannot. I know it must be something system wide as it happens in apps other than Pages.

I put an object and/or a text box on a page and then cannot select it - the Text cursor (not pointer, just the text cursor shows) is put on the object or text box and nothing happens. It is so frustrating! I then open up Everweb and the same thing, I create an object and then try and elect it to make it bigger etc and cannot. I know it must be something system wide as it happens in apps other than Pages.

How can I plot two sets of data points in 3d graph?

I am trying to plot two sets of data points in 3d graph. I also need to make a set of data with one color and the other set with a different color. For example, I need to plot 10 (x,y,z) data points in 3d. Maybe 6 points need to be blue, and the other 4 red. Could you tell me how?

What is your LabVIEW version? (things are a bit different in 8.6).
Basically, you create multiple instances of the VI that gets placed automatically when you drop the 3D graph and then wire a different number to the plot ID at the bottom.
You define all the plots (color, style) via the properties dialog.
Have a look at my example posted here. One plot is "blue dots" and one is a "shaded surface". See how far you get.
Message Edited by altenbach on 04-23-2009 01:11 PM
LabVIEW Champion . Do more with less code and in less time .

Associate text to each point in a graph

Similar Messages

Maybe you are looking for