How to let the user define the colors for each plots in the graph (I use LabVIEW 7)?

How to let the user define the colors for each plots in the graph (I
use LabVIEW 7)?

Hi,
Take a look at this example, it uses property nodes to select tha
active plot and then changes the color of that plot.
If you want to make the number of plots dynamic you could use a for
loop and an array of color boxes.
I hope this helps.
Regards,
Juan Carlos
N.I.
Attachments:
Changing_plot_color.vi ‏38 KB

Similar Messages

  • APP-ALR-04106: Please correct the user-defined SQL statement for this alert

    Hi All,
    I have created an alert for engineering module in R12. It got tested and was working fine. when the user testing it, while trigger the alert getting the error, "APP-ALR-04106: Please correct the user-defined SQL statement for this alert".
    when verified the alert, it got verified and ran also. It parsed the query successfully and when run it fetched few records.
    Need help in resolving the issue.
    Thanks in advance.
    Regards,
    sri
    Edited by: user10939296 on Jan 18, 2010 1:16 AM

    Hi Sri;
    I have already gone through the Note: 948037.1. But this note is related to 11i. The solution provided in the Note is for 11i.
    I am facing this issue in R12. Is this patch applicable to R12?I belive its not. But u can check Solution part 4 for your instance, at least it can give you idea. The other note in metalink related bug and all for R11 too.
    I belive its better way to rise Sr while waiting other forum user response to that thread
    Regard
    Helios

  • Removing the user define comments while trying to write to the property fil

    Hi All,
    While using new Properies().setPropety(). It is removing the user define comments from property file.
    Could you please explain me why it is happening and how can I restrict it
    Thanks & Regards
    Edited by: Rakesh83 on Feb 20, 2008 4:33 AM

    Rakesh83 wrote:
    Could you please provde me sample code for this?
    #! /usr/bin/groovy
    xml = '''
    <config>
        <property name="foo" value="bar" comment="blah, blah, blah" />
        <property name="baz" value="qux" comment="doodle doodle dee" />
    </config>
    def config = new XmlParser().parse(new StringReader(xml))
    def property = config.property.find { it.'@name' =~ 'baz' }
    assert 'doodle doodle dee' == property.@comment
    property.@value = 'snorp'
    assert 'doodle doodle dee' == property.@comment // comments preserved!
    // write xml as needed~

  • How can I 'force' my Macs to look for each other on the network?

    OK, I have an iMac with a wired connection to a router, and a MacBook Pro with a wireless connection to the same router. Most of the time, they can 'see' one another on the network, no problem. But, every so often, even after both have been on for a while, I will click the Network icon and the other computer will not appear as available - this happens even when the target computer can see the computer I'm using to try to access it.
    So, here's my question: how can I 'force' my Macs to look for (and find) one another on the network?
    Thanks... if you need further information, just ask... - beck

    If you are using Tiger, go to
    Finder menu -> Go -> Connect to Server
    Enter the specific IP address of the other Mac where is says +Server Address+. You can find the IP address by running System Profiler or looking at System Preferences Network pane (on the other Mac).
    Once you have mounted the volume you to access, make an alias for it and place it in the Dock or on your Desktop. The next time you want to connect to that server, use the alias.

  • Where can I find the user key precedence hierarchy for each record type?

    Example: I want to update contact records through the CRMOD web service API.
    So I'm looking at the "Oracle Web Services On Demand Guide, Version 6.0 (released August 2010)", page 316, and it lists 3 user keys for Contact.wsdl v2.0 in the following order:
    1. FirstName and LastName
    2. Id
    3. ExternalSystemId
    From what I can see, this order does not seem to reflect the precedence hierarchy of these 3 user keys.
    I've send in a test update where I supplied a FN, LN, and EUID, ... and the contact that matched the EUID got updated.
    (I'm glad it did, because EUID really needs to take precedence over FN+LN, otherwise you could never change a contact's last name without knowing the contact's Row Id.)
    Does anyone know where I can find the precedence hierarchy for each record type's user keys (other than doing the obvious and time consuming "try+error")?

    Hi,
    we experienced similar problems with the account object and asked the oracle support about this. This was their answer:
    "[...] thank you for contacting CRM On Demand Customer Care. Regarding your question, please note the below: when perfoming a query, the user key fields are looked for in this order: - Row id - External System Id - AccountName and Location. Basically, the search will be performed by AccountName and Location only when the other fields are missing. This is an expected behavior because, the Row Id is the strongest filter as it is always unique. The external system Id comes second, as it is supposed to be unique in another system."
    So, I guess the order is always
    1) Row Id
    2) External System Id
    3) specific field combinations...
    kind regards
    Kai
    Edited by: Kai Hartmann on 28.04.2011 07:10

  • How to get the tag of the User Defined Variables using the Get Tag method%3F

    For the cRIO modules under a cRIO Chasis, a tag value can be obtained using the Get Tag method with crio.Type to the TagName input of the method. When it comes to the User Defined Variables, what should be fed to the TagName input?

    For the cRIO modules under a cRIO Chasis, a tag value can be obtained using the Get Tag method with crio.Type to the TagName input of the method. When it comes to the User Defined Variables, what should be fed to the TagName input?

  • LMS 4.2 compliance reports for the User-Defined Policy Groups.

    Dear team,
    I need your help to know if i will be able to export compliance reports in PDF or CSV for the User-Defined Policy Groups.
    I have checkedk the reports tab and i was able to export compliance reports in PDF format inly for the system defined policies but i couldn't i find any option to export these reports for the a user defined compliance policy.
    Kindly let me know if this is possible.
    Regards,
    Muhannad

    Dears,
    Do anyone have an idea about this question?
    Regards,
    Muhannad

  • Bummer Message:  Cannot Get Mail  The user name or passowrd for "

    I have had the iPad 2 for one week and was able to access two gmail accounts (mine and my wife's). . . until this morning when one of them (mine) starting giving me the message:  "Cannot Get Mail  The user name or password for "####" is incorrect."  The other gmail account is still accessible. So what is the solution--if any?

    If your having problems sending email - go into your email settings and see if you can enter a password for your outgoing mail server same password as your incoming mail server.

  • Language of Voice Over for each song on the iPod nano 7g.

    Can I set the language of Voice Over for each song on the iPod nano 7g, or how could be automatically detected? I have music in several languages ​​and I want to hear the name of the song in the language in which it is written .

    acknowledge the problem

  • How to define new colors for the form?(Finish)

    Hello! Everyone!
    I want to define new colors for the new form.
    But I don't find where I can define it.
    How to define new color for the form?
    Thanks in advance!

    You have to set the Canvas color or as I said earlier you need to use one of the available color schemas on the OAS or Builder runtime.
    If you want to use user defined colors in the builder, then you need to create a new color palette and use it.
    I personally haven't tried it, but there is a section in the online help that describes how to do this.
    Tony

  • How to bind the user-defined watch to a specific server so that server's Health would show green ball and is linked to Monitoring watch?

    Hi,
    I create a user defined watch for BI4.1 ExplorerExplorationServer server in CMC -> Monitoring.
    Caution:
    node.ExplorerExplorationServer$'Server Running State'==1 ||
    node.ExplorerExplorationServer$'Server Running State'==2 ||
    node.ExplorerExplorationServer$'Server Running State'==4 ||
    node.ExplorerExplorationServer$'Server Running State'==6 ||
    node.ExplorerExplorationServer$'Server Running State'==7 ||
    node.ExplorerExplorationServer$'Health State'==1
    Danger:
    node.ExplorerExplorationServer$'Server Running State'==0 ||
    node.ExplorerExplorationServer$'Server Running State'==5 ||
    node.ExplorerExplorationServer$'Health State'==0
    However, in CMC -> Servers -> Explorer Services, the ExplorerExplorationServer shows "Information is not available" blue ball in Health.
    How do I bind the user-defined watch to a specific server so that server's Health would show green ball and is linked to Monitoring watch?
    Regards,
    Jin-Chong

    Hello JinChong,
    We had created User-defined Explorer watches on our environments and have run into issues.
    Have received many false alerts even though Explorer servers are running fine.
    After creating an AGS case it was informed to us that Explorer does not have monitoring capabilities.
    AGS is checking with solution architect of Explorer application about when the monitoring watches for explorer would be included.
    Regards,
    Rohit

  • How to raise the user defined Exceptions in XI ?

    Hi All
        I am learning XI ...i want know how to set up the user defined Exceptions
        in XI?
        Where and What are the settings need to be done ?
        Same time where can check the LOG file ? to see all the server information ?
    Welcome to your answers
    Regards
    Rakesh

    Rakesh,
    Check this weblogs which will guide you:
    /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
    /people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
    /people/stefan.grube/blog/2005/12/30/test-user-defined-functions-for-the-xi-graphical-mapping-tool-in-developer-studio
    Also check this thread:
    Mapping test throughs exception for UDF that does'nt exist anymore
    ---Satish

  • How to catch the user defined  exception in application service

    Hi All,
    How to catch the user defined  exception in application service  when it is throwed by the external service..
    Regards,
    Thirumurugan.

    Hi,
        Thanks for your reply,
            Actually I  am calling validate Login method of External service from the application service. When the login fails, my external service will throw user defined Exception.I want to catch the user defined Exception.
        But in the application service , validate Login method can catch  only Invocation Exception and Engine Exception.
       These two exception are present in the Application service remote interface.
      public com.sap.comptest.extsrv.accrjavawsvi__document.output.
    Ns1_validateLoginResponse validateLogin(com.sap.comptest.extsrv.accrjavawsvi__document.input.Ns1_validateLogin input) throws com.sap.caf.mp.base.exception.InvocationException, com.sap.caf.mp.base.exception.EngineException;
    User defined exception is not present there. When i include the webservice as external service in CAF, it suppossed to generate the java file for the custom exception of validate Login method and this generated file should be included in the application service remote interface..
    public com.sap.comptest.extsrv.accrjavawsvi__document.output.
    Ns1_validateLoginResponse validateLogin(com.sap.comptest.extsrv.accrjavawsvi__document.input.Ns1_validateLogin input) throws com.sap.caf.mp.base.exception.InvocationException, com.sap.caf.mp.base.exception.EngineException,
    (generated file name of user defined Excpetion.
      Then only  validate login method  of application service can catch  the user defined Exception which is thrown by the  external service.
    regards,
    Thirumurugan.p

  • How do we create user defined Task in OM & Which report we run for the Task

    Hi
    How do we create user defined Task in OM & Which report we run for the Task.
    Regards
    Rajesh

    You can create tasks using PFCT or path: Human resources> Organizational management> Expert mode> Task catalog in Easy access.
    Check this link may be useful for you: http://help.sap.com/saphelp_40b/helpdata/pt/fb/135d89457311d189440000e829fbbd/content.htm

  • How to define the same font size,color for a text field label

    hi all,
    In my project i need to define the same font size & color for all the text field lables in the application.how do we can achieve this?
    Thanks & regards,

    ...or you could use declarative components....
    Not sure if skinning would prevent developers from overriding a look and feel??? hmmm not sure..
    Grant

Maybe you are looking for

  • Can't print from MAC on network

    HP PSC 1410 connected to a Lenovo running Windows Vista.  Printer is shared on the network.  Print job from MAC gets into print queue on Vista machine.  Status goes from Spooling to Printing but then goes to Error - Printing.  Can print from other Wi

  • Derivation of Batch number from billing documents

    Hi, The system picks up the batch number for the billing document when I do simulation thru KE4ST but when I release the billing document, it ends up in error of not finding the batch number. The system has default derivation based on table VBAP and

  • Problem with customer exit variable in BeX Query

    Hi All, We have created a customer exit variable in a query and populated with few patterns in customer exit. My query has to bring all the records where the address line is containg the patterns passed through customer exit. Here the query is not wo

  • Can you have a look at this video and give advice please?

    Hi Guys, Can you have a look at this video- http://www.youtube.com/watch?v=UA0x3bQUW-g I shot it for a friend at a hotel. Can you let me know if if works ok / stutters etc. on your computer. I edited hdv pal / ppro cs3 then adobe media encoder to H 2

  • Content Database large after removing BLOB

    My content database was 3 gigs before removing BLOB. In the process of removing BLOB, it required a merge which moved all of the files from the BLOB to my content database and made it 32 gigs. I then deleted the site containing all of the documents,