Async call using ICallBack

hi, In an Async call, there is a ICallBack interface, which is having a init(ODIInformationObj),
handleCallBack(long pElapsedTime)
handleFaultCallback(long pElapsedTime,Exception pException).
can u pls help me how to invoke the handleCallBack() method, or else
it will be invoked internally through the Thread call.
pls suggest me to post the Message via(DirectConnection) and get back the operation information to an ODIService.
Note:
I have this code:
Message xmlMessage = XMLMessageFactory.getInstance().createMessage(payload1);
payload1="<ns1:ODIInvokerServiceResponse " + " xmlns:ns1=\"http://xmlns.oracle.com/ODIService\">\n" +
"<ns1:odiPlan> " + pOdiPlanName + "</ns1:odiPlan>\n" +
"<ns1:elapsedTime> " + pElapsedTime +
" </ns1:elapsedTime>\n" +
" </ns1:ODIInvokerServiceResponse>";
getting Direct connection using:
DirectConnection directconnection =
loc.createDirectConnection(compositeDN,
"MasterBPELProcessDirect");
Sending Message like:
directConnection.post(pOperation, pNm);

You Might Try tapping the Home button and see what that does, Do it on a Test call with one of your Relative or Friend's so they know that when you tap the button and if it happens to end the call they won't be concerned because it was a test Call..
Hope that helps b33

Similar Messages

How to call RFC in Async Mode using TCP/IP RFC Destination ?

Hi experts,
Can anybody tell me how to call an Async RFC using TCP/IP RFC Destination ?
Regards,
Umesh

Check the link
http://help.sap.com/saphelp_nw04/helpdata/en/80/09680289c751429ab3b07ad2a61c10/content.htm
It says
<b> For asynchronous calls, no connection to external systems is possible (TCP/IP connections in transaction SM59).</b>
Regards,
Abhishek

Using Async calls in a Util class

I have a Utility class that I want to put code in that I'm reusing over and over again. This includes Async.handleEvent calls. If I call an instance of the Util class from a [Test(async)] method, can I use the Async call in that other event?
When I tried this in my code, it said that it "Cannot add asynchronous functionality to methods defined by Test,Before or After that are not marked async" but my [Test] is marked as async. And when I was in the same class, I was able to have non-Test methods make Async calls.
Thanks for the help!
Mocked up Example (please note these are two separate files):
// Test.as
package
    import TimerUtil;
    public class Test
        [Test(async)]
        public function waitForTimer():void
            TimerUtil.newTimer();
// TimerUtil.as
package
    import flash.events.TimerEvent;
    import flash.utils.Timer;
    import org.flexunit.async.Async;
    public class TimerUtil
        private static var instance:TimerUtil;
        private var timer:Timer;
        private static const TIME_OUT:int = 1000;
        public static function newTimer() : void
            if (!instance) instance = new TimerUtil();
            instance.timer = new Timer(1000, 5);
            instance.timer.start();
            instance.waitForFifthTick();
        private function waitForFifthTick() : void
            Async.handleEvent(this, instance.timer, TimerEvent.TIMER, handleTimerTick, TIME_OUT);
        private function handleTimerTick ( evt:TimerEvent, eventObject:Object) : void
            if ( timer.currentCount == 5 )
                // We are at the Fifth click, move on.
            else
                Async.handleEvent(this, instance.timer, TimerEvent.TIMER, handleTimerTick, TIME_OUT);
Message was edited by: zyellowman2
I missed a comma. And a few "instance"s

Yes, you can put async calls in utility classes or wherever you want. That isn't the issue here though.
In your test you call TimerUtil.newTimer()
That code creates a timer and then returns. Then your test returns. At that moment, FlexUnit sees that your test has finished and that there are no outstanding registered asynchronous events so it declares the test a success. Then, a second later, your other method executes and tries to register an async call. FlexUnit has no idea what test this pertains to, or why this call is being made as it is no longer in the context of the original test, hence the message you are receiving that you can only using Async calls inside of a method marked with a Async... as, in FlexUnit's opion, the method that is executing this code no longer has anything to do with a test with an async param.
The best way to think about this is a chain that cannot be broken. As soon as a method finishes executing with, FlexUnit will declare it a success unless we are waiting on something else (an async event of some sort) That is what the Async syntax really does, it tells the framework not to declare this method a success just yet, and that there is something else we need to account for to make that decision.
So, right now, in your newTimer() you don't let the framework know that you will be waiting for an async event. Therefore, when that method and the test method is over, so is the test.
Mike

Cancelling an async call in parallel flow activity

Hi all,
As known, each branch of a parallel flow activity must be completed for rest of the BPEL execution continues. Let me expose a scenario:
Imagine you need to get the current market value of the euro. You have 3 different sources of information that deliver the same result. Using parallel flow activity, you perform calls to these 3 sources. Once the first source calls back, it´s not necessary to wait for the others callback, because you already have the information that you need in your hands. How can I cancel the other waiting async calls? In WLI, we set up the parallel flow as AND or OR type. Using AND (+) means that all branch must be completed so that the process continues. Using OR (-) means that once the first branch is finished, the others will be ignored (cancelled) and the process continues. How can I get the same feature in BPEL?

Hi Gustavo,
There may be easier way to do this, but somehow it's not striking at the moment. In the meantime, you can try the following and see. If i get more robust and easier solution, i'll post it here.
Just thinking aloud here:
1) Throw a fault e.g. ResponseRecieved in each branch as soon as the branch recieves a response. The fault has to be handled in a fault handler associated with a scope containing the parallel flow. You can leave the fault handler "empty" (no-oos) and proceed with the rest of the activities.
The above should allow the control to proceed with the activities next to the flow.
OR
2) In each flow, as soon as you receive a response after receive activity, invoke a callback port type of the rest of the asynchronous calls and send a dummy callback message. This should mark the completion of the receive activities in other branches. I think correlaiton needs to be handled here.
Please try if you have not already done so and let me know.
Thanks-
www.ibiztrack.com
BPEL/ESB Training:
http://www.ibiztrack.com/html/oracle-bpel-soa-training.html

Async call gets stuck with pending status

Hi,
I am working on Tasklayer where need to invoke Async. call, the .bpel file has Invoke activity and below that it has pick activity with branches one for OnMessage and another is also OnMessage but, this is for fault. Now, when it invokes the Async. what i see in the instance is that the OnMessage activity gets stuck in Pending status, it doesn't proceed further. Kindly let me know if any one has faced similar issue.
Thanks & Regards,
Sanjay

Hi Sanjay,
you are saying that u r calling an asyc process.
So as an async process do not send the response back to parent through same port, you have to send the fault back to parent by invoking it(parent).
Here you can send the fault by using existing callback port otherwise you can define separate port for fault can send through that(you have to do it in WSDL).
So here for the first case no need to have the pick as u r getting both success and fault through same port. If you are going for separate one you have to have pick(one for success and other for faulted one)
So as Steven said you have to have a catch and invoke to send the fault back to parent.
Regards
PavanKumar.M

BPEL Async call with wait

I have requirement to make a bpel async call to webservice . As part of the requirement we need to wait for specified amount of time and re-request if no response is received. And finally error out after 3 attempts.
So it is really a 'sync call' with a wait period
Any suggestions as how this could be implemented ?

ok set the http read timeout.If you dont recieve the response within the time set in http read timeout property it throws an error invoke the process from catch all block.
otherwise use fault polices to retry invocation and set the http read time out property

Facetime call using the same APpLe Id on iPad and Mac

The FaceTime call using the same apple ID with the new iPad and iMac cannot put through to myself. In this case I do not want to get a new apple ID for FaceTime what can I do? I want to use the current apple Id.

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
I saw one post where a user said dust got inside the small microphone hole. Using a vacuum cleaner removed the dust and restored the audio.
 Cheers, Tom

I recently purchase an ipad2. I also have a mac laptop. Now, when I facetime call using my iphone to my ipad2 or mac, it states busy. how can i fix this problem? I have the same apple id e mail for both ipad2 and mac. it might be getting confuse now.

I recently purchase an ipad2. I also have a mac laptop. Now, when I facetime call using my iphone to my ipad2 or mac, it states busy. how can i fix this problem? I have the same apple id e mail for both ipad2 and mac. it might be getting confuse now. I want to be able to face time also using my ipad2 to my laptop especially if one of the members of the family is traveling. Thanks.

thanks. your answer was correct, clearer. I have another question, maybe you can answer. I just purchase my ipad2 2 days ago. yesterday, there was a sound. today there is no sound. there is a sound only in movies and you tube and music. but no sound on all apps and keyboards. I look it up and seems like ther are few that have this problem. I called walmart coz I bought it there and they told me that they have not heard that before but if I can't fix it, just return it and exchange it with anew one since I have 14 days to do that. I tried rebooting it and still won't work. Should I just restore it?

On my iPhone 4, people cant hear me when I make and / or receive normal (GSM) phone calls. But when on calls using internet based / native apps like viber or skype, people can hear me just fine. Voice memos work too and have already tried different SIMs

On my iPhone 4, people cant hear me when I make and / or receive normal (GSM) phone calls. But when I make/receive calls using internet-based / native apps like viber or skype, people can hear me just fine. I have tried recording my voice using voice memos - this works. And have already tried different SIM cards but the problem persists.
I have taken my phone to an authorized Apple service center, where they restored my phone to factory settings, but still facing the same issue. They service center directed me to Apple Customer Care Hotline, where I have now spent 3+ hours explaining my issue and yet no one can resolve it. The easy answer if to replace the phone - and since it is out of warranty, I am expected to pay for it.
Additionally, the customer service has been so rude and confrontational that it has completely changed my view of Apple and its customer focus. I am a disappointed and angry customer today - people would be surprised to hear just how rude customer service was including making statements such as "Apple doesnt make infallible products, that's why warranty is needed for our products" and that "every product undergoes a problem at some stage, so do ours!" There goes whatever confidence I had...
My concern is simple - if no one at Apple and / or its CS hotline is able to address my issue comprhensively and keep telling me that they have never encountered a precedent before, then with what right can they expect me to pay for a replacement?! I am NOT here to fund Apple's research into their product faults and manufacturing.
And even though a customer is out of warranty, is it too much to expect an Apple product to work well for at least a 'reasonable' period of time. My phone is less than 18 months old and has been facing this issue for the past 2 months - surely the longevity of Apple products is more than 18 months!
Just a sad sad day for an Apple customer, compounded by unjustifiably rude and aggressive staff. And still no resolution to my problem.

I am having the same issue - with my last 2 iPhone 4's. My first handset each time I was on a call wether it was up to my ear or on loud speaker, the call would automatically mute even though the mute button wouldn't show up as highlighted. Pressing the mute button on and off during the call doesn't fix it either. I rang Apple and asked what some of their trouble shooting solutions were. I got told that it might be a software issue and to install the latest software update. This failed. I then got told to uninstall the software on the phone and do a complete restore. This also failed. After trying the troubleshooting suggestions, I took the phone into my provider and they sent me out a new phone within a week under warranty claiming it was a hardware issue and probably just a "glitch" with that particular phone. This was not the case....
After receiving my second iPhone 4, I was hopeful that it would work. For the first couple of days, making/receiving calls was not an issue. Until after about a week, the same problem started again. In one instance I had to hang up and call back 4 times and the call would still automatically mute after about 5 seconds. Also on the second handset, the main camera located on the back of the phone has red and blue lines running through it and can't take a decent picture. So back to the store I go to get another replacement - Again.
For a phone that is rated highly and as a keen Apple product purchaser, I am a bit disappointed with the experience I have had with the iPhone 4. Let's hope they find a fix sometime soon because this is becoming a bit beyond a joke.....!!

I have imported contacts from Outlook to Mail and they have synced via iCloud to my iPhone 3GS. I can't get my iPhone to make a call using these contacts but if I dial the number of any of the contacts on the keypad, the call DOES work! Help me please!?

I have imported contacts from Outlook to Mail and they have synced via iCloud to my iPhone 3GS. I can't get my iPhone to make a call using these contacts (it tries but then says call ended) but if I dial the number of any of the contacts on the keypad, the call DOES work! Help me please - is there something I need to do to the contacts because tehy came from Outlook? Thanks

Thank you for replying. Yes I deleted the old email address..

Problem with BAPI_DOCUMENT_CHECKOUTVIEW2 while calling using JCO of XMII

Hi DMS Gurus,
The above FM is successfully executing and creating a local copy in temp folder of where the FM running using SAP GUI.
But when i call using jco,i am getting some problems.
1. If i execute the FM with default values for http dest and ftp dest, i am getting error saying << c:\temp\....file could not be created.
2. When i changed the HTTP destination to <<SAPHTTPA>, it is executing fm successfully but dont know in which system the file is downloaded.
My client application or xMII server ( where jco service is running ) or ABAP server.
I checked in the first 2,i didn't find.
SAP GUI is not installed in xMII server.
But my requirement is to download to the physical server of xMII ( jco ).
Is this any thing to do with creating http destinations??
If that is the case, can any body help me in creating http destinations..
and i heard something about SAPFTP.EXE ,is that should be some where in client or any servers??
Please help me.
Thanks
Vansi

Vamsi,
As I mentioned in this forum thread, bapi_document_checkoutview2. You have to use the POST action in BLS to communicate with the HTTP Interface of Content Mgmt. directly. The only other alternative is to write your own BAPI to retrieve the content and send it back to xMII via the JCo action (Hint: The data will be base64 encoded and can be saved to the filesystem via the Image Saver action even though it is not an image).
Sam

Problem with BAPI_DOCUMENT_CHECKOUTVIEW2 while calling using JCO

Hi DMS Gurus,
The above FM is successfully executing and creating a local copy in temp folder of where the FM running using SAP GUI.
But when i call using jco,i am getting some problems.
1. If i execute the FM with default values for http dest and ftp dest, i am getting error saying << c:\temp\....file could not be created.
2. When i changed the HTTP destination to <<SAPHTTPA>, it is executing fm successfully but dont know in which system the file is downloaded.
My client application or xMII server ( where jco service is running ) or ABAP server.
I checked in the first 2,i didn't find.
SAP GUI is not installed in xMII server.
But my requirement is to download to the physical server of xMII ( jco ).
Is this any thing to do with creating http destinations??
If that is the case, can any body help me in creating http destinations..
and i heard something about SAPFTP.EXE ,is that should be some where in client or any servers??
Please help me.
Thanks
Vansi

Vamsi,
As I mentioned in this forum thread, bapi_document_checkoutview2. You have to use the POST action in BLS to communicate with the HTTP Interface of Content Mgmt. directly. The only other alternative is to write your own BAPI to retrieve the content and send it back to xMII via the JCo action (Hint: The data will be base64 encoded and can be saved to the filesystem via the Image Saver action even though it is not an image).
Sam

Why can I not make a call or receive a call using my earbuds/mic?

Why can I not make a call or receive a call using my earbuds/mic?

I have the exact same problem. I just updated to 4.3.3 and now my inline controls on my earphones don't work. The earphones work, but the controls don't. It doesn't even recognize that there is a mic attached. Even with the earphones in it still uses the built in mic. Why did my controls stop working?!

Can I force my phone to make calls using WiFi, even when wireless is available?

When I was in the UK a couple years ago I could make calls back to USA using WiFi, because the wireless service was incompatible with my phone.
When I was in the Dominican Republic last year, even though I used GrooveIP and Google Voice, I came home to a $400+ wireless roaming bill, I think because the wireless service there IS compatible. So how do I force my phone to make calls using WiFi, even when wireless is available?

Hey there FredW,
A $400 bill would certainly cause my jaw to drop so I absolutely want to provide you steps to prevent this from happening going forward.
To avoid data charges you are going to want to make sure that Data roaming is turned off,http://vz.to/18oRFuS.
You'll also want to disable mobile data,http://vz.to/1hCPg4Q.
When using services such as GrooveIP, Google Voice, Skype you are going to want to make sure that you are connected to WiFi. Here is how to set up a WiFi connection,http://vz.to/II1jP6.
Let us know if you have any additional questions.
NicholasB_VZW
Follow us on Twitter @VZWSupport

Hi iam using iphone 5s which is locked to EE carrer. I am not able to make a conference call using this phone in india

Hi iam using iphone 5s which is locked to EE carrer. I am not able to make a conference call using this phone in india

then call EE if they are your carrier

Async call using ICallBack

Similar Messages

Maybe you are looking for