AsyncOS 6.3.1-025 and 6.0.2-017 for Web are GA

Dear Cisco IronPort Customer,
IronPort, now part of Cisco, is pleased to announce the General Availability (GA) of the two maintenance releases of AsyncOS 6.3.1-025 for Web and 6.0.2-017 for Web to all customers. These releases applies to all our Web Security Appliances (S-Series).
Enhancements and Fixes in AsyncOS 6.3.1-025 for Web
Partial list of defects fixed in 6.3.1-025
* Fixed: Web Security appliance spontaneously reboots due to a slow memory leak when clients used NTLMv1 authentication in some cases. [Defect ID: 52548]
* Fixed: Webroot scanning engine stops working when downloading some .cab files. [Defect ID: 53793]
* Fixed: Web Proxy generates a core file after a client sends a POST request to a server that returns a 503 “Service Unavailable” message in some cases. [Defect ID: 54019]
* Fixed: Web interface erroneously shows 100% CPU utilization when rate is lower. [Defect ID: 54767]
* Fixed: Web Proxy generates a core file and restarts in some cases. [Defect ID: 54890]
* Fixed: Web Proxy generates a core file and restarts after processing some HTTPS requests in some cases. [Defect ID: 55407]
Enhancements and Fixes in AsyncOS 6.0.2-017 for Web
Partial list of defects fixed in 6.0.2-017
* Enhancement: Added support for NTLM proxy authentication against Windows 2008 Server R2. [Defect ID: 49114]
* Fixed: Web Security appliance spontaneously reboots due to a slow memory leak when clients used NTLMv1 authentication in some cases. [Defect ID: 52548]
* Fixed: Webroot scanning engine stops working when downloading some .cab files. [Defect ID: 53793]
* Fixed: WBNP engine erroneously runs at 100% due to a memory leak. [Defect ID: 54034]
* Fixed: Web interface erroneously shows 100% CPU utilization when rate is lower. [Defect ID: 54767]
* Fixed: Vulnerability in Secure Sockets Layer (SSL) certificates. [Defect ID: 55278]
* Fixed: Web Proxy generates a core file and restarts after processing some HTTPS requests in some cases. [Defect ID: 55407]
For further information about these releases, please refer to the AsyncOS Release Notes. The release notes are available on our Support Portal:
https://supportportal.ironport.com
If you are concerned about an issue not listed there, please contact your authorized support provider to make an inquiry.
How to Upgrade
Prior to upgrading, please read the Release Notes referenced above and save a copy of the configuration file somewhere other than on your appliance.
Once you have read the Release Notes you may log into the command line of your IronPort Appliance as the 'admin' user, and type 'upgrade', or use the WebUI upgrade functionality in the "System Administration" tab.
**NOTE** It is important that you follow the upgrade instructions available in the Release Notes. If you do attempt to upgrade and do not see the desired release version available, your appliance is likely not on a version allowed to upgrade directly. See 'Upgrade Paths', below.
Upgrade Paths
Please refer to the Release Notes for qualified upgrade paths.
If your systems are on any other AsyncOS release, you will need to perform multiple upgrades as specified in the release notes. Only the immediate next step in the upgrade path will be shown to you, with the next revision being shown once you are at the approved level.
Release Stage
General Availability (GA): This release is available to all our customers and is a recommended build to be used in your production environments.
Thank you for choosing Cisco IronPort Security Products.
Best Regards,
Jakob

6.3.1-025 is GA and anybody can upgrade. Release notes can be found on the portal.
Notifications are done in several stages so not every customer is notified on the first day of GA.
I'll post a GA announcement here on the portal as well - sorry for the delay.
Best,
Jakob

Similar Messages

  • How can I import all my gmail contacts into iPad? I use iPad mini and the solutions available on the web are not compatible.

    How can I import all my gmail contacts into iPad? I use iPad mini and the solutions available on the web are not compatible.

    Hello and thanks for the answer.
    I meant by "not compatible" that all the solutions that I found on the web did not work, especially the "Microsoft exchange" one.
    Fortunately I found on the comments of the first website you mentioned the right answer for me, which I copy below:
    Tap Settings > Mail, Contacts, Calendars > Add Account > Other > Add CardDav Account.
    Enter the following information in the fields:
    Server: google.com
    User Name: Enter your full Google email address
    Password: Your Google account password
    Select Next at the top of the screen to complete the setup.
    After you have completed the setup, open the Contacts app on your device. Syncing should begin automatically.
    Additional Information
    Note: Make sure that SSL is enabled (under Advanced settings), and that the port is 443.
    If you are using application based special password go to https://accounts.google.com/Se... and instead of your password put that special code and u r done.

  • I am using photoshop cc 2014.2 And when I use save for Web it gives me a dialog box that says it is using Latin characters I've never seen this before. Does anyone have an answer for this problem or do I need to go back to the older version of Photoshop.

    I'm using Photoshop cc 2014.21 I you save for Web and dialog box comes up that says that Photoshop is using Latin characters and that servers cannot recognize Latin characters in webpages and you may have trouble viewing these pages does anyone have an answer for this problem?

    What Firefox version is currently installed on the computer?
    You can find the full version of the current current Firefox release (37.0.2) in all languages and all operating systems here:
    *https://www.mozilla.org/en-US/firefox/all/
    If you have a very old Firefox version then you could consider to uninstall that version to clean up existing registry keys (especial the uninstall key).
    Make sure NOT to remove "personal data" when you uninstall Firefox, because that will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
    Check the Firefox program folder and remove the Firefox program folder if there are still files left in it.
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure NOT to remove personal data when you uninstall Firefox as that will remove all Firefox profile folders and you lose your personal data.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Mixing CSS colors and image files from Photoshop for web

    Hello,
    I recently encountered a web production color issue and wanted to collaborate with other web producers to either inform or to see if there isn't a better work-around....
    A web site design has a particular color palette and some elements are converted to HTML/CSS colors (rgb hex values) and other elements must be saved as images--both with the same exact color appearance. We graphics professionals know that generally all images should have the color profile indicated (embedded, tagged) in the image file (e.g., sRGB, Adobe RGB or whatever) in our color-managed workflow so that the color numbers have meaning. For web, I've always used sRGB (the web standard) and tagged the images with the sRGB color profile.
    Historically, this probably hasn't mattered because no web browser cared about the image profiles anyway. However, recently, some browsers have started to implement color-management. This is good for pictures and such, but poses a problem for web graphic elements: the images are rendered in the color-managed sRGB, yet the CSS is still rendered outside of color-management (the so-called monitor or "device" profile?). Therefore, if a web page design's color palette is to be honored, the HTML/CSS hex colors must appear the same as the matching hex colors embedded in the images. However, modern browsers now render the colors in the color-profile-tagged/embedded images differently, so the colors on the rendered pages no longer match!
    My work around has been to NOT tag (embed) the web-element image files with any color profile and thus cause the modern browsers to do what they used to: render the images without a color profile just like they render HTML/CSS hex colors. Perhaps in the future, there will be an HTML specification to inform the web browser to render all colors (HTML/CSS/images) in a particular color profile. (In my cursory testing, I've found that current Safari and Chrome for Windows 7 do alter the tagged-image appearances, yet Safari in iOS does not.)
    Have other web producers run in to this issue and are there more eloquent work-arounds?

    Hi,
    This might help
    Serving Static Content on WebLogic and GlassFish | cdivilly
    Regards,
    Jari

  • Ps 3d and filters and save for web are not working the way they should

    At work we just put cs6 on a w7 machine running 64 bit which has more than that required mem and or ram to run cs6 - unfortunately I have to use a windows based machine at work (cheapskates). Anyways. I see the 3d menus and the filter menu in PS but they aren't funtional. The filter menu drop down is there but Liquify is the only one that shows up the rest are gray. The option to choose 3d is also there but they are not functional (grayed out) - I took a look at some online tutorials on using the 3d effect in PS CS6 and Ive gone through it a few times and it still won't work for me. Also, in illustrator when I save for web - when I adjust the pixel dimensions and move the mouse over and click on the image that I am saving for web nothing happens and I'm completely boggled about how to get the image size to change in the save for web pane. Typically I am used to being able to input the the number into the pixel dimenion field and click on the image and the image resizes (on a mac you can either click on the image or hit return and the image will resize in front of your eyes!). I am unable to get this to work the way I am used to, this happens for me in both ill5 and ill6 on this piece of crap windows machine. Maybe I just need to reinstall? Maybe adobe has changed the way this works? Maybe a sledge hammer into this windows machine would solve all my problems!? IDK. someone help... help me... pleeeeaaaaaaaaaaasssseeeee

    unfortunately I have to use a windows based machine at work (cheapskates).
    This gets a "stupid comment of the day" medal. Seriously. These days Macs are just as convoluted and effed up as Windows was a few years ago - nice as long as everything works, but god forbid you have a problem. So by all means, update your graphics driver and be glad that you actually have that choice rather than having to wait half a year for Apple to fix it...
    Mylenium

  • Selecting X and Y-axis in chart for web query

    I have 3 chars and 4 kfs in a query. I want to draw a chart with CHAR1 in x-axis and only 2 kfs in y-axis.  where do i set that my X-AXIS is CHAR 1 and KF1 and KF2 in Y-AXIS.
    When I do so all the KFs are getting displayed in the chart but I want only 2 Key Figures.
    Pls let me know.

    Bryan,
    Sorry the above answers I have given are suitable for Bex Charts.
    For Web Charts You can double click the chart and in the chart right click you can set the series, data points and everything.
    But as it is you can't say the char1 is my primay x axis and char2 is secondary and so on.
    Regs
    Gopi.

  • I created a logo in AI illustrator and saved it as "save for web and devices" to get a transparent background. the logo save in png format. Now the problem is I want to print it on a flex but when I zoom it, it looks like a scalar random image. please hel

    ???

    Also when I open it in illustrator.. and starting editing it but the objects are unable to select..what i do know.WoojinAmy_WongIllustrator@ I

  • I'm trying to load up webpages and am getting the error "URL not valid" but it's on sites and URLs that i know for sure are. Like when I click a link it'll do that but I'll close the notification box and click the link again and it'll load.

    I'll pretty much just get a message that says something like google.com is invalid when I know it for sure it. Even if I just click on a link on like Gizmodo or something, I'll get that message. I'll close the message and then I'll click the link again and it would actually load up now.
    == This happened ==
    A few times a week
    == A while ago. Perhaps a couple weeks

    Click here and request assistance.
    (91679)

  • HP LaserJet P1102w. I print the IP address in the address line and there is no tab for Web services.

    HP LJ P1102w. want to sign on the HP web services. I print the IP add. in Explorer and I do not get Web services tab

    Hi,
    The Web Services functionality is only avaiable on later firmware versions,
    Updating the firmware of the printer will add the functionality and the tab will become available.
    Be sure to temporary plug the printer to your PC with a USB, then run the firmare updater below by selecting the newly added USB printer queue:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-115794-1&cc=us&dlc=en&lc=en...
    Once the firmware update completes unplug the USB and follow the steps below to enable web services:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03128518&tmp_task=setupCategory&cc=us&dlc=en&lc...
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • About Typekit, Edge Fonts and Google Fonts real utility for Web Designers

    Hello,
    Perhaps it´s a simple situation for the majority of CC User but I´m a little bit confused about that. I have a TypeKit plan included in my Creative Cloud subscription. I have then the possibility of use Web Fonts included in Typeset (which is awesome, by the way). My problem comes when I try to use a TypeKit font for a client who does´t want to pay for a TypeKit plan and I can´t use the same font in the trial plan which is a great way of convince the client he needs TypeKit for a better typography access.
    So, my questions are:
    There is available TypeKit fonts in Adobe Edge fonts too?
    The only fonts available in Edge Fonts are Google Fonts?
    How can I know if a specific TypeKit font is available in TypeKit Trial Plan too without searching the entire catalog filtered by Trial Library or in Adobe Edge?
    Do you recommend to me a workflow in which I can use TypeKit fonts for clients avoiding the need to pay the client for that font? (it´s hard to convince him, not to use free alternatives like Google Fonts or Adobe Edge Fonts)
    Thanks in advance.

    I haven’t tried it so this may be a shot in the dark but you might be able to hack into the CSS and use @font-face to call a local font.
    Check the license of the font to be sure it allows this.

  • Passing user and password in the URL for web shop

    Does anyone know the parameters to pass a user ID and password in the URL of a B2B, B2C or UCES web shop?
    thanks
    Stu

    Suppose the URL of ur webshop is http://asdhfksldhfjsa.htm
    Provide parameters and attach it to above url, ex: http://....default.htm?firstname=Joshua&lastname=Dell&website=SDN
    In above URL you have 3 variables: firstname, lastname & website. These are name=value pairs separated by symbol & .

  • Is a message and call record using Skype for Web kept on the computer?

      does anyone know tell me path of historical web skype Does anyone know tell me path of historical web skype?     Subject/title amended from "Historic" to clarify the question. 

    I would check the web skype historic somewhere in the c: the machine eg in the folder " % temp % " for the company to use the skype app just that some older machines are complaining of memory because it is very heavy for them ... one of the fulga options that I found was the web skype but the only problem I found was that there's no way we monitor the message traffic as we made already ...

  • Actions and Save for Web

    I have tried to research this on my own searching the forum and asking users far more advanced than I am to no avail. I thought it might be possible that someone here would know whether what I want is feasible.
    I use the "Optimize to file size" feature in the Save For Web Panel constantly. I am planning on doing a large amount of conversions in the near future (by which I mean resaving .jpegs at a certain dimension and resolution. As far as the dimension and resolution go, there is no difficulty creating an action to do that. But the icing on the cake for me is have them all processed through Save for Web at a certain file size (for the sake of argument, say 500K). Yes, I know that the resulting images will vary in quality (obviously) because the end result will very much depend on their file size to begin with but that is not an issue for me for my purposes.
    Save for Web has various presets and allows you to save presets; however, it does not allow you to save the Optimize to file size as a preset. When I try to record an action, and go to the Save for Web, use the Optimize etcetera, the action created lists the quality of the image I process to record the action. So, for example, if my image is less than 500K, the quality recorded in the action is 100. If my image exceeds 500K, the quality might be 86 and that is what the action records. For whatever reason, what is recorded is the quality rather than the 500K. I am not sure if this is being written clearly enough to explain. I want every image to end up being 500K regardless of what the final quality is (quality being the difference between the original image and the image as saved by Save for Web). But actions are saving the attribute of quality rather than file size.  Sigh. I think I am just repeating myself trying to make it clear but probably failing. In case a screen shot helps clarify, here it is. If this can't be done, I would love to know that so I can give up trying.

    I want every image to end up being 500K regardless of what the final quality is (quality being the difference between the original image and the image as saved by Save for Web).
    You may have to resort to Scripting for this task … it may need a fairly convoluted approach but I think it has come up before, so someone may be able to help you over at
    http://forums.adobe.com/community/photoshop/photoshop_scripting

  • WLC: which software-version support SHA2 certificates for Web Authentification and Web Management ?

    Hello,
    I tried to install new SHA2 3th-Party certificates on our WLCs. There are old WiSM1-Boards and 2504 to support our old 1230 Access Points, running 7.0.251.2, which didn't install it, although the config manual for 7.6 and 8.0 say that SHA2 certificates are supported since 7.0.250.0. When I tried to install the SHA2-certificates I get the message "File transfer failed" an the log says:
    *TransferTask: Dec 12 13:22:14.394: #UPDATE-3-CERT_INST_FAIL: updcode.c:1869 Failed to install Webauth certificate. rc = 1
    *TransferTask: Dec 12 13:22:14.394: #SSHPM-3-KEYED_PEM_DECODE_FAILED: sshpmcert.c:4085 Cannot PEM decode private key
    I tried to install the same certificates on our WiSM2-Boards, running 7.4.121.0 and I failed too. The same certificates could be installed on a 2504 running 8.0.100 without any problems.
    In all 3 cases I tried to install unchained certificates for web management and Level 3 chained certificates  for web authentication. I used the following guides to get the certificates (e.g. taken from the config manual 8.0.100):
    http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/109597-csr-chained-certificates-wlc-00.html
    http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/70584-csr-wlc-00.pdf
    Which software versions support SHA2 certificates and which didn't ? Is the a list for it ?
    Regards

    Hello,
    I solved the problem. First I used a Debian Linux system with Openssl 1.0.1. After I searched the internet using one of the log messages above I found sites which mentioned to use Openssl 0.9.x. So I tried a productive and security fixes Debian Linux System running Openssl 0.9.8 and I succeeded. The wlcs accepted the certificate files and used it after a reboot. The Web GUI still shows a SHA1 Fingerprint, but the certificate signature Algorithm is SHA2:
    Signature Algorithm: sha256WithRSAEncryption
    When you check the openssl.org homepage Openssl 0.9.8 is still one of the actual version of openssl and is still available and fixed. But the Openssl Roadmap says:
    "We don't want to have to maintain too many branches. This is likely to include a timescale for the EOL of version 0.9.8"
    I don't know the differences between certificates made with openssl 0.9.8 and 1.0.1. Is there anybody who can explain it to me ?
    Regards

  • CS5 Save for Web and Devices problem

    I recently installed CS5 and now I cannot save for Web and Devices.  A pop up error window appears saying "A write permissions error has occurred".  Any suggestions to make it possible to save for Web and Devices would be appreciated.
    Also, when I exit Photoshop CS5, yet another pop up window appears and reads, "Could not save Preferences because the file is locked or you do not have the necessary access privileges.  Use the 'Get Info' command in the Finder to unlock the file or change permissions on the file or enclosing folders'.  Again, any suggestions as to what this message is about and how to make PS close as it did with CS4 would be appreciated!
    Thanks,
    E

    Try this first:
    Applications > Utilities > Disk Utility > Macintosh HD > Repair Disk Permissions
    Also make sure your not saving to a removable hard drive that is NTFS. If you can drag files into the drive its the right type of drive to use and there shouldn't be a problem.
    Apart from that all i can say is to restart your Mac and make sure all the adobe updaters are up to date
    Hope that helps
    James

Maybe you are looking for