At co11n in goods movement screen material not showing
hi all,
when i m doing co11n n going to goods movement screen it not showing material and its quantity though after the confirmation material deducted from its stock, plz help me in this matter
Hi dear,
In Production order in operation overview check if control key is correctly maintained or not.
Also in Production order component over view if the back flush is unticked then that material will not be seen in CO11N goods movement.
Similar Messages
-
Enhancement in CO11N in Goods Movement
Hi Experts,
My client's requirement is for some particular materials in CO11N in goods movement screen the quantity field will be non editable and for all other materials it will be in editable mode. There is a badi for goods movement WORKORDER_GOODSMVT. Will this badi will work? Can any one suggest me or send me a sample code?
Rgds,
SURYAHi
I tried the BADI, the method gm_screen_line_check is useful, the problem here is when you come to this screen the material and qty fields are editable but once press enter the BADI will get triggered.
Try looking for other options also.
Also look enhancement point also.
LOOP AT SCREEN.
IF screen-name = 'COWB_COMP-ERFMG'.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Shiva -
Storage Location is not found in Goods Movement Screen in Prod.Order CNF.
Hi Experts,
I have create a production order with Auto GI &GR.When i going to confirm it,in Good Movement Screen storage location entry field is not found thats why i can't enter Sto.Location.
Can any Expert tell me the solution for this issue?
With regards.
PrashantDear,
In the material master, MRP2 view maintain Storage loc for material.
Please refer this thread as a reference,
Storage location not found in MIGO for 101 movement type
Regards,
R.Brahmankar -
The CO11N Goods Movement Overview does not display any materials for BOM
Hello folks;
I can't seem to get a hit when searching for my particular question, which most likely is an easy one for most of you.
A new BOM was set up consiting of individual materials (no sub-assemblies).
After a production order was created (CO01) and released and a reservation was created, the user went to the CO11N transaction to process the first Operation (Issue the components to the Order).
He clicks the "Goods Movement" button and the "Enter production order confirmation: goods movement" screen that displays is blank! There are no components listed with the "261" movement type.
All the other BOM's that we process do not have this problem and their components appear except for this new BOM that was created.
What are we missing?
I'm sure this is an easy question for you folks since I am mainly an ABAP'er with some Logistics config experience.
Thanks in advance.
Scott.Thank you so much. The person who created the Routing did not click on any of the Backflush flags.
I will have them fix the Routing.
Thanks again.
Points awarded. -
CO11N-While Goods Movement System Not Allows Column/Field COST CENTER
Dear Friends,
While doing confirmation of PP/PM Order and doing goods movement the system not allows the Column/Field of COST CENTER.
Thanks and Regards,
Satyajit
PP/PMDear Thyagarajan,
1.I think the Planner Gruop will be at order level.
2.If I assigned the different Valuation Categories then I need to assign no.of G/L accounts.
Plz look for my senerio->I have a single Mnt.Order in which different operations carried out from different departments like civil,electrical,mechanical.Its like one project in PS.Now I assiged different Workkcenter/Cost Centers to respective operations.Now after confirmation,when I look the Cosing Report system shows the activity Cost departmentwise as its linked to workcenter/cost center,but material cost how it will get posted different departments?
Manually by 261->Order+Costcenter...I can post it but there is problem in Auto Goods Movement
Plz correct if wrong.
Thanks and Regards,
Satyajit -
During conf-plant field in goods movement screen - to be didplay
During Confirmation of a process order, in the goods movement screen, user can change the plant for a component...As a default it is copying the order header plant.
Since it is a changeable field i.e. value can be changed , user is changing the filed value and system is issuing the material from that plant.
Since the user has authorization in many both plant, hence I cannot restrict by authorization.
I tried in CO86 to change field status, but I am not in the position to get the plant filed in goods movement screen.
I am changing the screen with transaction variant, but I need to change all the training documents which is very big job and train many people.
Is there any other way out?Hi Rajesha
Not fully sure but i think you can use the BADi ( WORKORDER_CONFIRM) to acheive this.
BADI Details-
Definition - WORKORDER_CONFIRM
Interface - IF_EX_WORKORDER_CONFIRM
Methods = AT_SAVE, BEFORE_UPDATE, IN_UPDATE, AT_CANCEL_CHECK
Within this a system message may be issued only in in these conditions, while saving the confirmation ERROR_WITH_MESSAGE (for AT_SAVE method) or NOT_ALLOWED (for AT_CANCEL_CHECK method) at the same time
Just try this with your ABAP consultant ...
IT'll not make the plant field in display mode..but send an error if doesn't match with the plant in order header
Best Regards
Sumit Sharma
Message was edited by:
Sumit Sharma -
Goods movements of material with serial numbers
Hi,
1. Is there any report or table where I can see goods movement of material with their serial numbers?
2. Also in MMBE i can see 'On order stock'. I know this is PO open PO quantity.
Now this open PO qty will not be there against any storage location. I got some stock on this status in some storage location.
How I can move to 'unrestricted stock' status?
Please advice.Hi,
Is Serial number is the one obtained thro stadard batch management or is it a Zfield.
On Order stock cannot be converted to unrestircted stock unless a GR is made.
With regards,
Jeeva -
Reason in Goods Movement Screen
Hi all,
I want to Enter some fixec reasons in the goods Movements Screen(mb1a).
The Reasons One reason for Over Issue , another one Good Material Return to W/H, and last one from Return of Defect Material
Is it Possible to alter SAP Standard screen, If Possible which Screen E#xit/User Exit can i use , Please reply meHi,
yes you can alter SAP Standard screen, this can be achieved via development but taking so much pain to do this is better user select what the reason is.
this is given in standard SAP since there may be more than one reason, your requirement is unique.
Regrds
Rang -
Deletion Icon in Goods Movement screen of CO13
Hi experts
In the goods movement screen of CO13, the deletion icon provided is de-activated by default. Is it possible to activate it? If possible - how?
I want to remove the materials from the CO13 transaction, and cancel the confirmation qty only
Your inputs will be highly appreciated.
Regards
KrishnarajThanks for your reply.
But my requirement is that I must not reverse the goods movements at all. Thats the reason why I wanted to delete the materials that appear in the Goods movement page.
In some thread, I read that some expert had asked to delete the materials from the goods movements list.
I would like to know how to delete the materials. My deletion icon is inactive.
Pls find below thread :
Regards
Krishnaraj
Re: CO13 cancel confirmation - error
Prasobh Karunak...
Posts: 4,852
Registered: 9/1/06
Forum Points: 11,500
Re: CO13 cancel confirmation - error
Posted: Aug 21, 2007 10:53 AM in response to: Sankaran M Reply
Muthusamy,
*If you want to cancel only the confirmation, then after selecting the last operation for cancelling in CO13, hit the "Goods Movement" button, here you delete the line items which is basically to reverse GR & GI along with Confirmation.*
If you need to reverse the goods movement also, then follow the same step in the goods movement overiew scroll to the right side of the screen to find the field "Reason for cancellation", take a drop down and select the reason and save.
Regards,
Prasobh -
Ipod touch, web gallery, movies panel does not show in safari
i have some movies in my web gallery published from imovie08.
ipod touch safari will not display the movies panel of my web gallery, only the pictures panel.
however, i have a movie embedded in one of my picture albums which will play. so i know that it will
show movies.
anyone know why the movies panel does not show?To get pass the passcode lockscreen, recovery mode and restoring should help: iPhone and iPod touch: Wrong passcode results in red disabled screen
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
If the issue continues after updating and restoring your device, refer to this document. -
IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black!!
It's happened to me before as well. Try holding both lock(top right) and home buttons simultaneously until u see a slight flash of wight then just reboot it normally. If that doesn't work try restoring your device from itunes
-
First of all, I live in Ho Chi Minh City, Vietnam. Sometimes, I use a VPN to search on the web here. I purchased Toy Story 3 on my MacBook Pro 2011 OS/X - Lion through iTunes. I initially had trouble downloading it which may be due to being on and off the VPN but after a while it finally downloaded and shows up in my iTunes library on my MacBook.
Under my Apple ID account (which is the only Apple ID account I have), I look under purchase history and it shows that I paid for Toy Story which is where I got my Order # from. But if you go to the iTunes Store then to the Quick Links then click on Purchased, under all my Movies, it does NOT show Toy Story 3 as one of my movies.
Now when I go to my iPad (3rd gen.), Toy Story 3 does not show up under purchased movies (all or not on my iPad). It does not show up on my Apple TV as well. If I want to have Toy Story 3 on my iPad or Apple TV, then it says I have to purchase it again.
I have searched for help via Apple support communities but so far none of their solutions have worked for me. I have tried logging off iTunes & App Store on iPad and also shutting down the iPad. I also made sure that under iTunes Preferences>Store that iTunes in the Clouds purchases is checked. Can someone please help me with this? Your consideration is greatly appreciated. Thanks.Thanks King_Penguin for taking time to read and reply.
I just purchased this movie on Thursday, May 15, so just a few days ago. I have never had any trouble whatsoever since I have been in Vietnam. I have downloaded several movies and even music and they have all synced to my respected Apple products except for this purchase.
Sorry, I don't quite understand what you mean by studios and different versions. Could you please explain?
I checked my purchased list in my purchase history under my account and there are no hidden items. -
When I downloaded a movie it is not showing up on my TV what am I doing wrong??
after I downloaded a movie it is not showing up on my TV ...it seems I can only watch it on my computer...what am I doing wrong?
Welcome to the Apple Community.
Have you checked under the purchased section under movies. -
Any suggestions on problem I have. I receive images, say a file that is 3 mgs through email on Safari mail and when I try to resend it or forward it or any other larger file, when it sends the file is reduced by about 1/3. My screen does not show and drop down menu with a feature to keep actual size or reduce that is suggested when I looked up solutions to the problem. I can't find a setting anywhere in mail that I can change to make sure my files are kept at actual size. I figure a setting got changed -don't know how - but it happened about a month ago. Caused problems as I work in graphics can't send files to clients as they come out too small. Any suggestions on how to fix.
ThanksWhat email program are you using? And what do you mean by "Safari mail"?
-
Hello,
We were contacted by our customer, a landscape architectural company that uses our product, M-Color, (http://m-color.com) to plot AutoCAD drawings with required preferences and effects.
However, they provided us with a sample PDF files, that contain examples of scanned drawings, that have some "ghost lines" at the drawings that the screen does not show.
We tracked the issue and it appears to be an issue with Adobe Reader pringing. We tried many versions from 8.0 version onwards to the latest versions available in public, all represent the same issue.
This may be an issue of the original drawing having some line that was not marked ending at some point.
The zip file within the link below has three PDF files, two from the company that brought this issue to our awareness and the one with name "scanstation" is printed by me, and then scanned with markings to explain the issue.
Any ideas what would be the best solution to solve this issue?
https://skydrive.live.com/redir?resid=FF1904428CF64324!1445&authkey=!AMwkjv9QMg-GawgEdit>Preferences>Accessibility... Replace Document Colors (use custom colors - black on white)
That usually fixes ghosting...
Maybe you are looking for
-
Few days after Belle update my N8 suddenly lost 20 MB on C for no apparent reason. I've seen others report this, apparently same thing also happens few days after reset. Anyone know what it is? I'm not short of memory, just curious. Solved! Go to Sol
-
Error: code too large for try statement, when compiling a big java file.
Hi, I have a big java file ( around 16000 lines). When compiling it, I got following error message: MyMain.java:15233: code too large for try statement } catch ( Throwable t ) { In MyMain.java, I just repeat following statements about 1000 times. try
-
I am unable to secure delete those files in the Trash. Many files are marked as "locked" Is this way I cannot secure delete these files?
-
Where to put Logic Plug-ins?
When using a product like Miroslav Philharmonik, I can get the program to run, but I can not figure out how to make it work with logic. The plug-ins do not show up! Someone please help me know what folders to put what in. Thanks
-
The Home button is not responding with my ipad2.
My recently bought ipad2 is having problem with the Home button as it is unresponsive. I had removed all new applications downloaded from apple stores and restored it to the orginal setting. Still the same, even if i press the Home button & Sleep but