The CO11N Goods Movement Overview does not display any materials for BOM

Hello folks;
I can't seem to get a hit when searching for my particular question, which most likely is an easy one for most of you.
A new BOM was set up consiting of individual materials (no sub-assemblies).
After a production order was created (CO01) and released and a reservation was created, the user went to the CO11N transaction to process the first Operation (Issue the components to the Order).
He clicks the "Goods Movement" button and the "Enter production order confirmation: goods movement" screen that displays is blank! There are no components listed with the "261" movement type.
All the other BOM's that we process do not have this problem and their components appear except for this new BOM that was created.
What are we missing?
I'm sure this is an easy question for you folks since I am mainly an ABAP'er with some Logistics config experience.
Thanks in advance.
Scott.

Thank you so much. The person who created the Routing did not click on any of the Backflush flags.
I will have them fix the Routing.
Thanks again.
Points awarded.

Similar Messages

This Formula(Function) compiles but does not display any result

Please can anybody help me resolve this issue.The code below is a code for a formula(function) column in oracle report, i have complied this code and it successfully complied but it does not display any result for the column having a stock balance in the entire report.
function CF_STOCK_BALFormula return Number is
     v_all_positive NUMBER;
     v_all_negative NUMBER;
begin
     IF :transaction_type IN ('RECEIPT', 'RETURN') THEN
          IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
               :cp_stock_bal := :opening_balance + :cp_stock_bal + :quantity;
          ELSE
               :cp_stock_bal := :cp_stock_bal + :quantity;
          END IF;
     ELSIF :transaction_type IN ('ISSUE') THEN
          IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
               :cp_stock_bal := :opening_balance + :cp_stock_bal - :quantity;
          ELSE
               :cp_stock_bal := :cp_stock_bal - :quantity;
          END IF;
     END IF;
RETURN (:cp_stock_bal);
end;
Edited by: Gbenga on Jan 17, 2012 11:30 PM

Please can anybody help me resolve this issue.The code below is a code for a formula(function) column in oracle report, i have complied this code and it successfully complied but it does not display any result for the column having a stock balance in the entire report.
function CF_STOCK_BALFormula return Number is
     v_all_positive NUMBER;
     v_all_negative NUMBER;
begin
     IF :transaction_type IN ('RECEIPT', 'RETURN') THEN
          IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
               :cp_stock_bal := :opening_balance + :cp_stock_bal + :quantity;
          ELSE
               :cp_stock_bal := :cp_stock_bal + :quantity;
          END IF;
     ELSIF :transaction_type IN ('ISSUE') THEN
          IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
               :cp_stock_bal := :opening_balance + :cp_stock_bal - :quantity;
          ELSE
               :cp_stock_bal := :cp_stock_bal - :quantity;
          END IF;
     END IF;
RETURN (:cp_stock_bal);
end;
Edited by: Gbenga on Jan 17, 2012 11:30 PM

I installed the latest version of iTunes (10.6.3.25) on a new Windows 7 PC. I can see ahred libraries on Shared but can't import as the line containing the Settings and Import buttons does not display. Any suggestions?

To move the iTunes library to this new computer I switched on Home Sharing and can see the other libraries on my home network. If I select tracks from a Shared library I can't import them as the strip containing "Show: All Items" and the "Settings" and "Import" buttons, does not display at the bottom of the screen. Goes straight from the list of tracks to the strip with Playlist icons and xxxx items, tttttt total time, yyyy GB.
Any suggestions for making the Import button appear?

I hvae the EXACT same issue
I built a new computer which is EXTREMELY fast overclocked i7 ect and.. ITUNES DOESNT WORK
I click on itunes which ive uninstalled and reinstalled and reset the winsock AND seen if there were any errors AAAAAAND ive check the Hkey to make sure bonjur was the only one in there which it is and all that happens is my cpu goes to 25% and i cant do anything except go into the task manager and close it! ANYTHING with itunes (everything else is premium speed).
what do i do
windows 7 64 bit

My Creative Cloud desktop app does not display any means of signing in to my account. What would be the reason?

Creative Cloud desktop app does not display any means of signing in to my account. What would be the reason

BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html
or
Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

I can not install the Express after the Extreme tha AirPort tool is of no help. It does not display any base station.

I can not install the Express after the Extreme tha AirPort tool is of no help. It does not display any base station.

What is the exact model of the AirPort Express that you are trying to install? Which version of the AirPort Utility are you using? What is the operating system and version, and on what device, are you running the AirPort Utility on?

TS3297 ITunes for IOS does not display any content in the iTunes store

iTunes for IOS does not display any content in any section (other than Genius tab).
NB: I am signed in with my Apple ID & have an Internet connection.
On selecting say the "Music" tab the display briefly say's "Loading ...", but nothing displays, just a white screen.
I have tried signing out of iTunes & re-setting the iPad, but this does not fix the problem.
(The App Store is working fine!)

Status is :540672
<REQUESTRESULT>
<RESULT>
<UID></UID>
<STATUS>CAPI_STAT_DATA_ICAL</STATUS>
</RESULT>
<FAILURE>
<UID></UID>
<STATUS>CAPI_STAT_DATA_ICAL</STATUS>
</FAILURE>
<PARSE ERROR>
<MESSAGE>VALUE?TE</MESSAGE>
<STATUS>CAPI_STAT_DATA_ICAL_PARAMVALUE</STATUS>
<VTEXT>VALUE?TE:20060830
END:VEVENT
END:VCALENDAR
</VTEXT>
</PARSE ERROR>
<PARSE ERROR>
<MESSAGE>VALUE?TE</MESSAGE>
<STATUS>CAPI_STAT_DATA_ICAL_PARAMNAME</STATUS>
<VTEXT>(null)</VTEXT>
</PARSE ERROR>
<PARSE ERROR>
<MESSAGE>VALUE?TE</MESSAGE>
<STATUS>CAPI_STAT_DATA_ICAL_PARAMNAME</STATUS>
<VTEXT>(null)</VTEXT>
</PARSE ERROR>
</REQUESTRESULT>

Aperture 3 project does not display any images in one Project

This is a strange situation. The bullets below outline the situation:
The project does not display any images
When I place the pointer over the project it shows there are 500+ images
I have located the RAW images stored in my aperture library
I can pull up the images using a smart folder and searching for photos taken on the event day
This is happening only to one of my projects that I know of (weird!!)
I have tried to 're-add' the image by both importing and dragging and dropping into the project, neither works
I tried the following basics:
Fixed permissions
Rebuilt the database
Tried to re-import the data, but when I have the 'don't import duplicates' these are not an option
Found the images in my Aperture library
I created another project and drug all of the images into that project
Any idea how I can fix this?
My fear is that if I delete the original project, the original master images will be deleted.

The most common cause of this is some sort of stuff in the search box at the top of the browser that you don't expect to be there. Just clear it and all your images should show up.
RB
One note - if you drug your images from one project to another it moves them vs copies them unless you hold down the option key.

Product Revenue Bookings and Backlog Dashboard does not display any data

Product Revenue Bookings and Backlog Dashboard does not display any data even though the load completed successfully.
They are able to see just the parameters.
Not sure if the upgrade of the database from 9.2.0.6 to 10.2.0.3 is a factor.
What can I check?
Is there some table to verify that the data exists for display in the Product Revenue Bookings and Backlog Dashboard?
Screenshot is at:
https://gtcr.oracle.com/gtcr-dir/gtcr_5637/6415786.993/Product_Revenue_Bookings_Backlog_Dashboard.doc
Support suggested to create a new request set and run the initial load with load all summaries option; but there was no change in the Product Revenue Bookings and Backlog Dashboard.
Any ideas?

hi
We have faced the similar problem after the upgrade to 10G
What we did was
Ran the initial load of time dimension, Item setup request set, and the request set of all the dash board in the clear and initial load mode..
we were able to get the data once the clear and load is completed successfully
Regards
Ramesh Kumar S

I'm trying to extend the range of an Airport Extreme 802.11g by adding an Airport Express 802.11n. I set the Express up to join the existing network, but it does not make any difference in the range of the network. What's wrong?

I'm trying to extend the range of an Airport Extreme 802.11g by adding an Airport Express 802.11n. I set the Express up to join the existing network, but it does not make any difference in the range of the network. What's wrong?

Let me see if I can help you with the basic WDS configuration steps:
Note: To help facilitate the setup, temporarily connect the AXn directly to the AEBS LAN port using an Ethernet cable. Once the setup is complete, you can move the AXn to the desired location. For all configuration steps you will be using the AirPort Utility. Before starting, be sure to jot down the AppleIDs for both base stations.
802.11g AirPort Extreme Base Station (AEBS) Configuration
AirPort Utility > Select the AEBS > Manual Setup > Wireless tab
Wireless Mode: Participate in a WDS network
Manual Setup > WDS tab
WDS Mode: WDS main
Allow wireless clients (checked)
WDS Remotes: <enter the AppleID for the AXn here>
Click on Update and allow the base station to restart.
802.11n AirPort Express Base Station (AXn) Configuration
AirPort Utility > Select the AXn > Manual Setup > Wireless tab
Wireless Mode: Participate in a WDS network (Note: You may have to hold down the Option (Mac) or Control (PC) key to see this option in the list.)
Manual Setup > WDS tab
WDS Mode: WDS remote
Allow wireless clients (checked)
WDS Main: <enter the AppleID for the AEBS here>
Click on Update and allow the base station to restart.

Unable to load the EJB module. DeploymentContext does not contain any EJB.

I'm writing an enterprise application to familiarize myself with Glassfish 3.1.2 and EJB 3.1. I've created several local, stateless beans, and injected one into a JSF managed bean. The ejb and web modules compile fine, but when I launch the application with Glassfish I get the following startup error and the application does not deploy. I don't understand what it means, can someone ellaborate?
SEVERE: Exception while invoking class org.glassfish.ejb.startup.EjbDeployer prepare method
SEVERE: Exception while invoking class org.glassfish.javaee.full.deployment.EarDeployer prepare method
SEVERE: Exception while preparing the app
SEVERE: Unable to load the EJB module. DeploymentContext does not contain any EJB. Check the archive to ensure correct packaging for D:\Documents\NetBeansProjects\Test\dist\gfdeploy\Test\Test-war_war.
If you use EJB component annotations to define the EJB, and an ejb or web deployment descriptor is also used, please make sure that the deployment descriptor references a Java EE 5 or higher version schema, and that the metadata-complete attribute is not set to true, so the component annotations can be processed as expected
org.glassfish.deployment.common.DeploymentException: Unable to load the EJB module. DeploymentContext does not contain any EJB. Check the archive to ensure correct packaging for D:\Documents\NetBeansProjects\Test\dist\gfdeploy\Test\Test-war_war.
If you use EJB component annotations to define the EJB, and an ejb or web deployment descriptor is also used, please make sure that the deployment descriptor references a Java EE 5 or higher version schema, and that the metadata-complete attribute is not set to true, so the component annotations can be processed as expected
     at org.glassfish.javaee.full.deployment.EarDeployer.prepare(EarDeployer.java:166)
     at com.sun.enterprise.v3.server.ApplicationLifecycle.prepareModule(ApplicationLifecycle.java:871)
     at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:410)
     at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:240)
     at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:389)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl$1.execute(CommandRunnerImpl.java:348)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:363)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1085)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl.access$1200(CommandRunnerImpl.java:95)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1291)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1259)
     at com.sun.enterprise.v3.admin.AdminAdapter.doCommand(AdminAdapter.java:461)
     at com.sun.enterprise.v3.admin.AdminAdapter.service(AdminAdapter.java:212)
     at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
     at com.sun.enterprise.v3.server.HK2Dispatcher.dispath(HK2Dispatcher.java:117)
     at com.sun.enterprise.v3.services.impl.ContainerMapper$Hk2DispatcherCallable.call(ContainerMapper.java:354)
     at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:195)
     at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:860)
     at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:757)
     at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1056)
     at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:229)
     at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
     at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
     at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
     at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
     at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
     at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
     at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
     at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
     at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
     at java.lang.Thread.run(Thread.java:722)

My guess is that you deployed an ejb without bean in it. when you have an ejb module, be sure you have at least one bean present.
Are you sure you have implementend some beans? Or did you do this only in the web module?
Try adding an @Stateless bean doing nothing in you ejb module, redeploy and let me know if that works

Visual Studio 2012 SharePoint Project Error : The partial project item type does not have a value for this property

Hi,
I am getting this error from visual studio 2012 whenever i try to create the following project types:
- Workflow Custom activity
- Web parts
The error is as mentioned below
"The partial project item type does not have a value for this property"
Due to this the when I add above type of items in my project, they show a red cross icon against them.
Please let me know If have you any solution?

Hi
I had same issue. Below is the solution
Installing
"Visual Studio 2012 Update 3" usually solves this problem. (You can download it through microsoft's official site at
"http://www.microsoft.com/en-in/download/details.aspx?id=39305")
Hansraj Rathva

HT1688 I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s. With the new iPhone 5 the radio shows the phone is conected but does not show any music content.

I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s. With the new iPhone 5 the radio shows the phone is conected but does not show any music content. Any Suggestions?

You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup. If you haven't been doing this, start now and then restore your old backup. You will then be able to sync the new contacts back into the phone. However, you will lose all messages, etc newer thant the backup.

HT3917 I cannot get my mouse to work, I have changed the batteries, but it still does not register any ideas???

I cannot get my mouse to work, I have changed the batteries and it still does not work any ideas???????????

Hello:
Try resetting the SMC and PRAM.
Barry

Search Item drop-down does not show any data for Advanced Search.

Hi,
I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
I am using OAF version 12.1.1.
Thanks, Suresh

Hi,
I faced the same situation but i still waiting for the solution.. this is my problem's thread..
Addition of LOV Search Filter using Personalization
But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
Thanks
Renu

Error while deploying BPM : DC bpm_0/bl/ddic does not contain any archives for deployment

Hi All,
I'm using SAP PO 7.31 single stack. I've created a simple BPM in NWDS. I'm able to successfuly build the BPM which I created but when I "Deploy" it throws the below error.
DC bpm_0/bl/caf/metadata does not contain any archives for deployment
DC bpm_0/bl/ddic does not contain any archives for deployment
DC bpm_0/bl/caf/dictionary does not contain any archives for deployment
Not sure what/where to check and fix the issue. Can you please help me in fixing the issue?
Thanks
Raj.

Dear Raj,
I am looking into this.
In the meantime can you try this also.
xxx/pr/pm: Deployment error,&nbsp;GD&nbsp;|&nbsp;ABAP,&nbsp;SAP,&nbsp;benX AG,&nbsp;benXBrain,&a…
Thanks & Regards,
Patralekha

The CO11N Goods Movement Overview does not display any materials for BOM

Similar Messages

Maybe you are looking for