AT WITS END=PLEASE HELP! Unable to restore; No password; Bluish green-blac​k flickering monitor

Hi all, first time here, and I regret this is so long, but PLEASE bear with me.  Having gotten nowhere after roughly 20 hours of labor plus 8 hours with "customer support", I REALLY NEED YOUR  HELP!, PLEASE.. I have a Pavillion dv7-4087cl entertainment notebook running Windows 7, Home Premium, 64 bit, Product # wq637ua#aba. In essence, the primary issue is that I'm unable to do anything on my notebook. which includes a Notebook Recovery - the problems are broken down below.
Problems:
1. I noticed that the screen began to flicker, rapidly alternating between blue/green and black.  This seemed to coincide with an update that I was instructed to install on 7/19 by rebooting my computer (it was either an HP or Microsoft update). Of note is that there is no flicker when I am in Recovery Manager, Advanced System Diagnostics, or other "fix it" screens.
2. Also, another  major problem that keeps showing up is that this machine uses finger swipe technology to log on. I was so taken with the ease of this when I first got the machine < 8 months ago that, to my recollection, I never entered/registered a password.  Everything went swimmingly... until now.  However, now that I have this problem, I am unable to proceed with several possible remedies because it asks for the unrecorded password.
3.  Given the aforementioned, I've been unable to do a Notebook Recovery.
REMEDIES ATTEMPTED: 
1.  I have run Start-Up Repair with everything being ok, in HP Advanced System Diagnostics I ran the Tune-Up Program and all was well, and the same applies to the Hard Disk Test.  As per response to ADG's 7/12/11 post, I followed the directions found there, as follows: 1. insert CD and boot into recovey manager, 2. "Windows is loading files" message displayed, with "Welcome to Recovery Manager' at the top 3. However, I did not see Advanced System Options or System Recovery, but was able to access those somehow during another attempt at a fix 4 Was unable to find "Recover without backing up" or to click on "System Recovery" which was listed but, as noted below, it was not an option I could access/click on.  Although the screen said something like "reloading files", as I had my recovery DVD inserted, when that process was done, and the system rebooted, it was back to the blue/green/black rapid flicker. Along that line,  I made my  own Rescue Disc, and it is only one DVD.  In reading others' posts, sounds like I should have at least three discs. Do you think I need to order these from HP?
2.  Performed a "Hard Reset" to no avail.
3.  I have tried every approach that I could think of (e.g., F8, F11, System Recovery,  Advanced Diagnostics, etc.), and that the lack of a password would allow.  One thing I noted was that only two restore points were listed.  One was dated 7/18/11, it was an automatic resore point, and the "type" was "System".  The other was dated 7/19, which is when the problem first manifested, and it said it was an "HTFS" or some similar acronyms, and the type was "install".  It was after this install that I noticed the problem.
4.  Customer support rep said to do the following:  Run Hard Disk Test and, if it passes we know it's not a hardware problem - it did pass.  After the test,  he said to choose "shut down", but the closest option was "Exit", which I did  He told me to turn it off and, while rebooting, press F11 which would yield three columns.  All was going well at that point.  He said that beneath the "I need help immediately" screen, to select "System Recovery".  However, while that was listed, the only option to which I had access was to "Microsoft System Restore".  I clicked that, as I had done Many times before and, this time, as with the other times, it was just another exercise in futility.
STATUS:  The machine is not even 8 months old and, despite all efforts, it remains broken.  I am unable to do a recovery/restore, It appears to be a software problem, and I have no password which prevents many solution attempts, as well as other likely problems down the road. My finger swipe was all that I ever needed up to this point - lesson learned.   Thank you so very much in advance, sorry this is so long, and I would Greatly appreciate your H E L P

Hi,
First of all, try the following to see if this will allow you to boot into Windows.
Download the application on the following link and save it to your Desktop.
PC LoginNow
Next, download and install  ImgBurn.
Now, download and install 7-Zip.  When installed, right click the PC LoginNow download, select 7-Zip, select Extract Files and click OK.  Open the newly extracted folder and use ImgBurn to correctly burn the ISO file to a CD.  A guide on how to use this is on the link below.
PC LoginNow Guide
Insert the CD into your PC you can't log in to and restart to boot from the disc.
Hopefully this should simply remove your password altogether.  Let me know the result of this before going any further.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • I keep getting the error message "apple application support is required to run itunes. Please uninstall itunes and then install it again." I've done this twice and still keep getting the same message...I'm at wits end Please HELP!!!

    I keep getting the error message "apple application support is required to run itunes. Please uninstall itunes and then install it again." I've done this twice and still keep getting the same message...I'm at wits end Please HELP!!!

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • PLEASE HELP - Unable to restore all messages from my backup file (.bbb) - 21800 messages and I need them all

    Hi.
    This is not the first time I encountered this issue. The backup file itself is 18.5MB in size. The critical stuff is my 21800 messages (emails for 7 different email accounts). Whenever I do a restore, the DM only reads 13859 messages and unfortunately not in reverse order. So I end up with no emails for the last 7 months! BIG PROBLEM for me! I have done a selective restore. I have done a complete wipe and then a full restore (no success), then deleted all data and tried a selective restore and only selected the messages (still only around 13,500 messages).
    There appears to be a limitation around the 13500 mark for messages.
    PLEASE, PLEASE, PLEASE help.

    It's been a while since I used Apple's Backup, but you should be able to select "Restore" from within the app to find an iCal backup file. When you find your most recent backup file restore it to your main computer. An iCal backup should look like this: "iCal - 10/31/06.icbu". Once you have the file you can just double click on it and iCal will open and give a warning about overwriting your current database file. You can just select "Revert" to overwrite the current file since you have nothing in it now. Everything should then go back to the state it was in since your last backup. You might lose some of your most recent entries if they were not in the backup, but you should get back most of what you lost. Good Luck!!

  • At My Wits End - Please Help Before I Contact OFCO...

    I have been loyal BT customer since... well having a landline in my name.
    We have been experiencing problems with BT / BT Broadband now for over 3 months. During this period we have had over 6 engineer visits an countless phone calls to BT Customer Services and also their Priority Care desk and the problem is still not resolved.
    Over 3 weeks ago I also sent an email to BT asking for contact from someone residing in the UK that could assist with the issue. I asked for a response within 10 working days and stated failure to respond would result in contacting OFCOM, watchdog and/or Trading Standards.
    The problem comprises of two issues -
    1] very slow broadband connection - no more than 0.13Mb/s at best (and that is when we have a connection at all
    2] zero broadband connection
    The telephone line crackles badly too, but as the landline is only there for the broadband this doesn't really concern us too much. We use our mobiles for phone calls.
    A similar fault stems back to 2008 when we started experiencing slowing connection speeds, but after a service visit the fault appeared to be fixed until this time last year it slowed to a death again. Following another engineer visit connection stabilised at around 1Mb/s. Then 3 months ago the problem started all over again.
    Whenever I call the customer service line, we get routed to their call centre in India where we just keep being fobbed off by engineer visits by engineers that are either not capable of doing the work or do not have the time allocated to do a comprehensive service.
    We have been told a huge number of excuses (From aluminium in the ground running next to the cables to faults with our equipment in the house (which has all been replaced for new within the last 3 months) to "we can't find a problem") as to why the service is unstable and slow.
    Another Engineer is booked for tomorrow morning, but I am fairly confident they will not solve the issue.
    The lack of service is causing problems trying to sort out year end Self Assessment, book holidays, online banking etc... over and above communicating with family living abroad (via Skype) and general surfing - all things we can not do from work.
    I have a brief record of all the attempts to resolve the issue including records of speed tests. I can also get the entire case history from BT if necessary (as I think they are compiled by law to hand over any notes they have taken). I also obviously have a copy of the email sent to direct to BT.
    Can someone here please, please help or advise who I need to contact to get the issue sorted out for once and for all before I take the matter further?
    Solved!
    Go to Solution.

    1) What is the maximum speed you can get in your area? Type your number into the box on the right of the following web page:
    http://www.productsandservices.bt.com/consumerProd​ucts/displayTopic.do?topicId=29017
    It will tell you whether you can get BT Infinity and what your potential line speed is for your area.
    2) What package are you on? All BT packages are subject to a Fair Usage policy. Even if you are on the 'Unlimited' package your speed will be slowed down if you are a heavy user. Contact BT (call 150 from a BT landline) and choose the options concerning questions about products. Don't choose the fault options else you'll be put through to India. This way you will hopefully be put through to somebody in England as I was, and you can get the matter solved more easily. Try and find out whether your account / line has been put under Network Management.
    3) What products do you connect to the Internet with? Xbox? BT Vision? Give us a full list.
    4) As the above user imjolly said, run the BT speedtester and post some of your router information. A moderator then may be able to provide assistance.

  • PC & MAC's on a network, disconnect issues, AT WITS END, PLEASE HELP!!!!!!

    HI everyone...
    This problem has me broken and utterly confused. I'm somewhat of a newbie to MAC, so I still have a PC my girlfriend uses that is wired to the router. She also has a gateway laptop w/ wireless card. I've seen the promised land and am the proud owner of a MacBook. The router is a Linksys WRTG54GS router, if that would help. The reason I bought the router is that it is noted as "very good."
    I'm under suspician that it may have to do w/ Mac system updates...any ideas????
    The only problem is when, the home network (with security or without) has the MAC on the network, the network breaks down after around 15-20 minutes. It works fine for that period of time, then in the wireless indicator on top, it always goes down to 4 bars, but the network is not accessible at all.
    When it is only PC on the network, it stays up without any issues. I WANT TO USE MY MAC WITHOUT RESETTING MY ROUTER EVERY 20 MINUTES....PLEASE HELP!!!!!!!!!!!!!!!!!!!!
    ps- I've updated the firmware and everything, to no avail, it doesn't work.

    I had a similarly frustrating experience when setting up my Linksys WRT54GS wireless router. My new MacBook Pro would not connect to the Internet as it would not take an ip address from DHCP on the Linksys router.
    The problem was that the latest firmware from Linksys for this router (1.50.9) is at fault. It is not compatible with Mac OS 10.4.8. In order to get things to work normally I had to downgrade the firmware of the router to version 1.50.8
    You may have to hunt around the various Linksys forums sites to find version 1.50.8 as Linksys Canada would not provide it to me. I was told to use manually set ip addresses until a new firmware version was released. However, version 1.50.8 seems to be stable and working well for me.
    There are similar problems with the compatibility of the firmware on the WRT54G Linksys router with OS 10.4.8 too, which also requires downgrading the firmware. Check the Linksys forums for more details as the firmware versions are different for this router.
    Good luck!
    Quicksilver G4, MacBook Pro C2D Mac OS X (10.4.8)
    Quicksilver G4 Mac OS X (10.4.1)
    Quicksilver G4   Mac OS X (10.4.1)  

  • HT201272 Im unable to find deteted apps in purchased section in App Store ..please help me in restoring the deleted app

    Im unable to find deteted apps in purchased section in App Store ..please help me in restoring the deleted app

    Is the app still in your country's store (if it isn't then you won't be able to redownload it), you haven't changed countries since buying it (content is tied to the country as well as the account), and it isn't hidden : http://support.apple.com/kb/HT4919 ?
    If the app is no longer in your country's store then do you have a copy of it on your computer's iTunes library and/or on your backup of your downloads/library ?

  • Sign into iCloud pop-up message on iPad2 won't disappear off screen, have reset password multiple times but it is saying incorrect. Please HELP unable to use iPad as message appears every few seconds, iPad was working fine until now.

    Sign into iCloud pop-up message on iPad2 won't disappear off screen, have reset password multiple times but it is saying incorrect. Please HELP unable to use iPad as message appears every few seconds, iPad was working fine until now.

    After the restore did the phone work properly for a while? Say, a day or so?
    If so it is possible you have an app that doesn't let go of memory properly. I reboot my iPhone ( hold sleep/wake and hole till you see the apple logo) every few days. This resets the memory. The iPhone OS has doesn't seem to mange memory very well yet. So a reboot will help with that. I have had my phone almost slow to a stop before I started rebooting. Always reboot after installing a new app. Also do you close all pages in Safari when you are done? This is a good practice. Safari will run in the background and use processor time and drain your battery quicker. Create a new blank page then close all others when you are done browsing for a while. I have also found that certain web site that have animated images like weather maps will turn the phone into molasses. As soon as i close that page it gets faster.
    If all of the above have no effect then as Tamara said it is time for a trip to the Genius bar.
    Good luck

  • HT204266 I lost the app "app store" on my iphone. How to get it back? I couldn't find a way neither on the iphone mor on iTunes Could you please help me in restore this app? Thanks

    I lost the app "app store" on my iphone. How to get it back? I couldn't find a way neither on the iphone mor on iTunes Could you please help me in restore this app? Thanks

    The App store is a iOS function and cannot be deleted. Try checking other home screens/folders and see if you can locate it. If not, go into Settings>General>Reset>Reset Home Screen Layout.

  • During installation of itunes using Windows 7 64-bit, I have this error come up every time during installation.  Tried uninstalling and re-installing, tried msconfig startup and service checks. At my wits end. Help!

    During installation of itunes using Windows 7 64-bit, I have this error come up every time during installation. 
    "An Error occured during intstallation of Assembly "Microsoft .VC80.CRT type="win32". version="8.0.50727,6195", public Key Token="1fc8b3b9a1e18e3b, processor Architecture'+x86'".  This is all followed by some more text and code HRESULT:0x80070005   
    Ive tried uninstalling and re-installing, tried msconfig startup and service checks. At my wits end. Help!
    Anne Marie

    Probably should've searched around a bit more. Just saw a similar forum post to my own in which redownloading and burning solved another user's similar issue. As of now I've redownloaded the 64-bit ISO, burned it, and so far so good (at 72% extracting files). I will repost here if it was a success in hopes that other users with a similar issue find this and benefit from it. Hope I didn't just waste anyone's time with a question that had already been answered (haha)

  • I can not access the calendar, reports that calendar application unexpectedly ended. please help

    I can not access the calendar, reports that calendar application unexpectedly ended. please help
    Os Mountain Lion

    Which install type did you choose? If you chose Custom, you may not have installed OHS at all...

  • HT5616 i have loss my apple id and i have no idea about every thing which is related to id i send my apple imei number please help me to restore my apple phone

    i have loss my apple id and i have no idea about every thing which is related to id i send my apple imei number please help me to restore my apple phone.

    Hello, i got the same problem with my device. It`s locked because I can` activate Icloude (my apple ID)...it appears with the same massage hellp

  • HT201441 Please help me I forgot the password for iclaud I can not open the device I want a solution "

    please help me i forgot the password for my iclaoud  i can not open my the device

    Try to reset your password here: http://appleid.apple.com

  • Please help me to change the password policy in Sun Directory Server 6.0

    Hi,
    Please help me to change the password policy in Sun Directory Server 6.0

    What are you trying to accomplish? Have you at least read the manual?
    http://docs.oracle.com/cd/E19693-01/819-0995/fhkrj/index.html
    As reported in earlier threads on this forum, DSEE 6.0 IS NOT a release you should use in your production environment, specially if you're starting new projects; consider moving at least to the latest 6.x release which is 6.3.1.1.1
    thanks,
    Marco

  • Help, please. Unable to restore from time machine.

    My mid 2011 imac had been working fine. I needed to restore to an early version. I have attempted to do so using the comman + R function during boot up. I followed the directions provided. However, after a while this shows up:
    panic(cpu 0 caller 0xffffff800d8c0ac1): "Unable to find driver for this platform: \"ACPI\".\n:@/SourceCache/xnu/xnu-2422.90.20/iokit/Kernel/IOPlatformExpert.cpp: 1541
    Debugger called: <panic>
    Bactrace (CPU )), Frame : Return Address
    0xffffff8085fabdc0 : 0xffff800d422fa9
    0xffffff8085fabe40 : 0xffff800d8c0ac1
    0xffffff8085fabe50 : 0xffff800d892f1f
    0xffffff8085fabea0 : 0xffff800d892adf
    0xffffff8085fabf30 : 0xffff800d88e6b9
    0xffffff8085fabf70 : 0xffff800d893633
    0xffffff8085fabeb0 : 0xffff800d4d6ff7
                        can't perform kext scan: no kext summary
    BSD process name corresponding to current thread: Unknown
    Mas OS version:
    Not yet seen
    Kernal version:
    Darwin Kernel Version 31.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90~2/RELEASE_X86_64
    Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
    Kernel slide: 0x000000d200000
    Kernal text base: 0xfffff800d40000
    Please help. I need to get my imace working again asap with all my information.

    First, to the why. Shear silliness. It's a long story, but I needed to access a website that was cached to view its source code (long story) but only the version in the cache. Unfortunately, I opened that website after the important code had been removed thus removing the old cache version (it's one of those sites that saves only your most recent visit). In an effort to retrieve this information I had the not so brilliant idea to restore my computer. I didn't realize at the time that I propably could solely restore just the cache and not the entire machine. However, in my mind it should have made no difference. Just simply restoring from a backup. Afterall, thats why we backup.
    Second, how early? To a version 12 hours younger. So, everything should have been up to date.
    Here's some even newer information:
    Last night, before your reply, I was able use the command + R function on boot up again. This time I reinstalled the operating system using wifi. The computer is now working, but did not restore. During the installation I was given the option using migration assistant to use my most recent backup. I did this, following the directions given (it's pretty simple--just click when it tells you to). Despite it saying that the migration worked my computer doesn't have any of my old stuff.
    I really need to get my info back. I had thought this is why we use time machine and allow it to backup my system a billion times. Its very frustrating that this is not working.

  • Driver issues 0768 6vg at my wits end need help please

    Hi
    well im at my wits ends with this
    need some help if pos
    I've upgraded my lenovo n100 0768 6vg to windows 7 ultimate but am having lots of probs finding drivers for a few things
    everything works fine otherwise though ( well so far at least )
    not sure what the drivers are 2 just show as a system board device and the other is the finger print reader driver
    if anyone has had this problem or knows were I can find out the the full list of drivers or a device manager over view pic would be help at least I could then work out what's missing or if there is drivers wrong as well to sorts them out at the same time
    have tried the system updater but it don't seam to find anything even though it did correctly detect my system in the first place and the o/s in use
    may thanks in advance

    Thanks Duck3
    spot on did have a look though most of those but couldn't make heads or tales of it was a late night
    worked like a charm device drivers turned out to be the 1394 firmware forgot I even had one on there lol
    other was the authentec driver should have realized it as never forget the pop up window every time you boot up
    anyways
    so all sorted
    many thanks for the help 

Maybe you are looking for

  • Creation of Business Event Type

    Hi We have already created a Business Event Type called Safety Refresher. Actually this training will happen every month. already created Safety Refresher and again trying to create its showing business event type already exists. Now i want under saf

  • Best practice for database move to new disk

    Good morning, Hopefully this is a straight forward question/answer, but we know how these things go... We want to move a SQL Server Database data file (user database, not system) from the D: drive to the E: drive. Is there a best practice method? My

  • Definition could not be found

    I am getting a couple of error when I try to use a component as a itemrender for my tile list. Both of these mxml files are in the same folder. I am getting the following errors. 1120 Access of undefinded property PropertyThumb 1172 Definition Proper

  • Edit a class file in Eclipse

    I am new to Java and Eclipse and Weblogic. I was give a .war file and told to simply edit a parameter that they thought was in one of the .jsp pages in the war file. the only occurance of the parameter name "SearchProvider" is in the Search.class fil

  • Transferring Data from phone to FB

    Just figuring this Thunderbolt out.  Looking to transfer videos and pix from phone to FB.  Says I need driver.  Went to HTC to download but said it was harmful to my computer.  No driver came with phone.  So what is a gurl to do?  Ha-elp!