AT300 - cannot write to SD card using 3rd party App

Hi,
I'm using the tablet AT300 on Android ICS and I'm a developer.
There is a bug with the sdcard : we cannot write into it (read access only).
This bug is from Android (we cannot write into the "sd card2" and the internal storage is the "sdcard").
For example, download an application like "Astro" and try to add a folder into your SD card: you can't.
But with the file manager of Toshiba, you can do it !
How ? Any special autorisation ?
In my application, I'm using :
<uses-permission android:name="android.permission.WRITE_EXTERNAL_ST ORAGE" />
and
<uses-permission android:name="android.permission.WRITE_MEDIA_STORA GE" />
like your file manager, but for me, when I install it I got :
Not granting permission android.permission.WRITE_MEDIA_STORAGE to package com.idtgv.kiosk.androidapp (protectionLevel=3 flags=0x8be46)
Some manufacturer make a patch for this problem (like I do if I root my Tablet but I don't want), anything like that for Toshiba ?
Thanks,
Stan

Hi
Did you try to format the SD card using the exFAT format?
Do that and use exFAT.
The Toshiba file manager handles any SD card format therefore youve got no problems using the Toshiba file manager

Similar Messages

  • Can't write on SD card even first party apps

    Since I updated my Xperia Z to the 4.4.4 kitkat using pc companion, I couldn't copy any file to SD card
    Searching on Google I knew their is a restrictions for third party apps but even my first party apps can't write on my SD card (32 gb). Camera app can't save captured pictures to SD, file commander says error when I try to copy to SD.
    I got a notification than is my internal is full with more than 75% space when try to transfer media to SD says error
    I am really tired of this **bleep** tried factory reset, changing my SD card but didn't fix the problem.
    When I mount SD card from settings then remount it works even with third-party apps but when I reboot the phone all files I copied to SD card is lost as I didn't even use it
    I still can use file that is already on SD card and also can copy it to internal storage.
    The sony's kitkat update really ruined my SD card, pls any help to fix this?

    You may need to perform a software repair using PC Companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
    Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
    Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).

  • How do I crop pictures on my MacMini (like I can crop them on my iPhone) instead of using 3rd party apps?

    When I want to crop pix on my Mac I send pictures to my iPhone where I can crop them then send 'm back to my Mac so that I can use them There must be a simpler way (beisdes forking out 5 bucks to companies that make a profit on a requirement that should be included in the MacOS). I feel I am missing out on something...

    You could try and make 're-size and rotate' kinds of corrections as necessary and then make a screen shot of them on the desktop of your computer, as they should be in .jpg format or easily saved as such when done...
    The default system application that opens files like text, images, and the like should be able to handle the resulting files for a peek as well.
    You may be able to choose a basic application (like Preview) that was included with the OS X. You can zoom-to-fit an image into a window, then screen capture it using the standard keyboard shortcuts in OS X. I've done this in most versions of OS X (& Mac OS 7~9.2.2) and like simplicity.
    Good luck & happy computing!

  • Every single 3rd party App crashes

    Hello,
    I'm running a 8gb EDGE 2.0.1 iphone. Every single 3rd party app crashes all of a sudden. I tried restore. all native apple apps load, but even when I just synce 1 3rd party app to the iphone (so all native iphone apps and 1 3rd party) that always crashes to iphone home screen.
    I need to fix this because I need to use 3rd party apps like zenbe (which was working perfectly for me a week ago)

    ok i had this same problem i called apple the guy i got new exactly what was happening and game me a work around. follow these steps exactly. this is a mac work around only dont know about windows.
    1 make sure your phone is not connected to your computer.
    2 delete every app directly from iphone by holding a app and then clicking the x
    3 go to settings general reset and choose reset all settings
    4 now on your computer open itunes on the menu bar go to store and deauthorize your computer
    5 quit itunes
    6 reopen itunes and reauthorize the computer then exit itunes
    7 open isync go to preferences and select reset sync history and exit isync
    8 open itunes and connect your iphone. it may freeze itunes for 2-10 minutes but dont exit just
    wait it will eventually recognize your iphone.
    9 after itunes recognizes your iphone go to the music tab and select a small playlist to sync then got to the app tab and choose sync selected apps and if anything is selected deselect them.
    10 if you have remote app select it if not download it for free and select it
    11 then select two other apps and click apply
    12 it will start to sync. it will say removing apps let it do this. depending on how many apps you have it could take a long time (mine took more than an hour)
    13 if you get error 0xE800002E after you are done just repeat steps 1-8 it wont take long this time
    14 if you dont get the error check to see if your remote works if it does check the other apps if they dont work repeat steps 1-8 if they do you are done just restart the iphone to make sure the still work
    15 if you got the 0xE800002E error and have repeated 1-8 sync remote and two other apps and it should work if it does not try again it worked for me the first time though.
    it is a long process but be patient and all will work out.
    that is it until apple fixes this stupid issue which should never have gotten passed testing.
    hope this helps
    if u need help or inform me of how it went u can email me at [email protected]

  • Outlook "The Operation Failed" - Sending emails from 3rd Party Apps

    I have an issue similar to this one
    http://community.office365.com/en-us/f/158/t/272002.aspx
    This started a few weeks ago for some users. Users cannot send emails generated from 2 3rd party apps. They get the error "The Operation has failed".
    Not all users are affected but the only solution is to turn on Cached Mode in Outlook.

    Hi,
    I'm marking the reply as answer as there has been no update for a couple of days.
    If you come back to find it doesn't work for you, please reply to us and unmark the answer.
    Regards,
    Melon Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Many 3rd party apps that I have used before now will not open with the alert "XYZ application cannot be opened because the identity of the developer cannot be confirmed"  Why now?

    Many 3rd party apps that I have used before now will not open with the alert "XYZ application cannot be opened because the identity of the developer cannot be confirmed"  Why now since I updated Mavericks?

    The format in which a developer has to sign his application in order for it to be recognized as signed has changed. Update the applications, wherever possible.
    To make a one-time exception to the security policy, follow these instructions. They apply to Installer packages and other installable items as well as applications.

  • I wanted to know the safety of subscribing to 3rd party apps through the app store? i also wanted to know if we could use a iTunes gift card for the auto renewal subscriptions?

    We wanted to subscribe to an app through the app store for our child. We just wanted to know how safe these 3rd party apps are with credit card information, because we dont want our information used in the wrong ways, or used for things other than the subscription. We also wanted to know if the subscriptions could be paid with itunes gift cards.

    This link may help: http://support.apple.com/kb/HT4009 Also not the additional information link near the bottom.
    Basically anything purchased "in app" is handled through your iTunes account.

  • Can't use system ringtone in 3rd party apps since OS upgrade

    Yesterday I upgraded the OS on my BB9900 to 7.1 Bundle 2061 (v7.1.0.714 Platform 5.1.0.532). I then had to completely reconfigure BeBuzz LED customiser (v 5.0.40 for OS 7.1) for specific contacts and apps. Before upgrading I had used 3Bells as a contact-specific alert for emails and text messages in BeBuzz. But since the upgrade it won’t let me us 3Bells. If I try, the following message appears:
    “The selected ringtone 3Bells is a system protected file and cannot be accessed by 3rd party apps. Please move a copy of the file to a different folder on your phone. This applies to all ringtones that came preinstalled on this phone”.
    This is very strange, as this restriction wasn’t there before upgrading the OS. My question is, how do I locate the folder where this ringtone file is?
    Q10 | Vodafone UK | London

    +"remove the "com.apple.systempreferences.plist" file...then re-open the system preferences..."+
    And remember to either log out and back in to the account or restart the computer to force the generation of a new prefs file.

  • Cannot figure out how to get 3rd party plugins to load

    Hey All.
    I'm attempting to use 3rd party plugins (specifically, ValhallaFreqEchoMkI 1.01), and I cannot figure out how to get them to show up in MainStage (ver 3.0.4). I know how to use native plugins as chanel strips and in the Audio FX section on the strip, but I cannot figure out how to ACCESS the patches I have downloaded. Please help!
    -thanks, Jim

    All,
    To turn on the CMSS features. The sticky at the top of this (Sound Blaster) forum covers the steps on how to enable surround sound effect or you can check out the Knowledgebase article for the steps.
    For those with PlayCenter software, you could check the Extigy as example.
    http://us.creative.com/support/kb/ar...p?l=2&sid=4883
    Jason

  • PKI setup using 3rd party certificates

    I want to configure SCCM in our environment using are existing certificate creation infrastructure. I do not want to use Microsoft Certificate services. Instead I'd rather use our OpenSSL solution. However I cannot find good documentation to work with using
    3rd party certificates. Everything is related around Microsoft's certificate services.
    Has anyone had any luck implementing SCCM in this manor? Documentation available to aid?

    So we are planning to setup https across the board and going through the blogs and TechNet article - I see that internal PKI is a requirement and you just cannot do away with 3rd party/external certificate, correct ??
    I am working on a scenario where the customer does not want to implement internal PKI but use external certificate either by GoDaady or Thawte or VeriSign where possible at all times but looks like you can't use the external certificate to act as ConfigMgr
    Web Certificate or ConfigMgr DP Cert?
    given the following scenario
    https://social.technet.microsoft.com/Forums/en-US/ac34ebdf-c932-4075-b4a3-ebe572ffab0e/scenario-multi-tenant-configmgr-2012-r2-and-same-ip-address-range-for-multiple-customer?forum=configmanagerdeployment#868600a8-e8eb-471a-b767-761305636041
    for clients to communicate to DP's/Secondary Sites configured in HTTPS, we still need internal PKI ?
    I guess the answer is yes to all.. but just confirming :)

  • Using 3rd party binary in script that is run as job

    Hi all,
    I have several scripts to do various tasks with IIS logs we receive from all our various web servers.  One script unzips logs, another logparses to grab a few fields then sftp to a 3rd party for analysis, another will encrypt the original zip files
    in prep for ftp to 3rd party, another will ftp to that 3rd party, and yet another will analyse the logs with our in house analytiscs application.
    I want to have a master script that will run these other scripts as jobs so that it will control when to start certain scripts based on the state of the jobs.  It all seemed to work great as I was setting up test jobs, until I added '3rd' party executables
    like 7-zip, ftp.exe, winscp, etc...  The jobs would just go to failed state when they hit the executables.
    That's not my current problem though as I found out that if I used the
    -windowstyle hidden option for start-process then everything ran as expected, that is until I wanted to log output from the 3rd party app.  FTP for example.
    I tried this:
    $ftpexe = "C:\windows\System32\ftp.exe"
    $ftpscr="d:\scripts\ftpscrtmp.txt"
    "open 111.1.1.1`r`nSomeFTPuser`r`nSomepassword <..bunch of other ftp commands>" | Out-File -FilePath $ftpscr -Append -Encoding "ASCII"
    start-process -wait -filepath $ftpexe -argumentlist $ftparglist  -RedirectStandardOutput $ftplog -windowstyle hidden
    However, asking powershell to redirect output of a hidden window was probably like asking someone to cover their eyes and read a book and it let me know it.
    I have tried without using -windowstyle hidden and not having any luck.  I want to capture the output of the ftp commands so that I can make sure the file was transferred successfully.  If I run the script without -windowstyle hidden and not as
    a job it works, and I can test the output.  I really want to be able to run this script as a job AND get the output of the ftp to a file... advice?
    Thanks in advance!

    This works with no problem for me.
    Start-Process -wait -filepath ftp.exe -argumentlist  '-s:c:\scripts\ftpcmd.txt' -RedirectStandardOutput c:\scripts\ftp.log
    I get no window and the file gets written.
    This is my ftp command file:
    open ftp.microsoft.com
    anonymous
    [email protected]
    ls
    bye
    ¯\_(ツ)_/¯

  • Is it safe to use 3rd party chargers

    is it safe to use 3rd party chargers on the ipod touch 4g or can it mess up the touchscreen or should i get the official apple ones because i have heard some of them blowing up :O and catching fire so do they get hot while they are charging (uk 3 pin) thanks

    I sometimes charge mine from my iPad 1 charger or my Griffen charger I purchased from my 3G Nano.
    s.salmanhussain10 wrote:
    bob please tell me so its safe to charge from ipad original charger? n from any iphone(original/3rdparty) charger ?
    thanx

  • I am attempting to update students' iPads using the Apple Configurator software. However, information for 3rd party apps, like Notability and Explain Everything, is being lost.

    I am attempting to update students' iPads using the Apple Configurator software. However, information for 3rd party apps, like Notability and Explain Everything, is being lost.

    Mike,
    If by "still nothing" you mean they are not showing up in the AU manager after reinstalling them....
    Im guessing the AU Cache itself is now corrupted so.....
    Quit LPX
    Open Finder
    Press the option key and click "Go" in Finder's menu and select "Library". (This is the User Library and not the System Library and is normally hidden which is why you have to hold down the option key when clicking on Go.... to reveal it in the drop down menu that will appear)
    Go to "Caches" dir and remove "AudioUnitCache" dir.
    Now Restart your Mac.....
    and then Launch LPX and let it rescan your plugins and see if that fixes things....
    Fingers crossed...
    Nigel

  • Getting chapters from PPro 2.0 into Encore 2.0 while using 3rd party encoder

    Placing chapters in Premiere is a HUGE time saver. However, I also like to use 3rd party software to encode my videos to MPEG (Canopus ProCoder2.0). This process loses the Chapter information that the .avi file carries. Is there any way to get the chapter information into Encore while still using ProCoder?

    Ok, thanks. I really wish Adobe would allow users to import and export chapter information. That would greatly increase my workflow. The thing that kills me is that in Encore 1.0, the chapters were connected to the timeline, not the video. So I could drop the AVI file into a timeline in Encore to create the chapter points, then delete it and place my MPEG video in its place. But Adobe got rid of this capability in 1.5.

  • I have update to iOS 8.1.3, and I cannot open both centers, or use and cancel apps, or the screen change color to gray, or the display do not recognise that I touch it, and more. If I restart it, I find another mistake in next five hours.Help me pls.

    I have update to iOS 8.1.3, and I cannot open both centers, or use and cancel apps, or the screen change color to gray, or the display do not recognise that I touch it, and more. If I restart it, I find another mistake in next five hours. Help me please.
    iOS 8.1.3
    iPhone 5s 32 GB
    CPU 64 bit

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

Maybe you are looking for