Ati Mobility HD 5470/Intel integrated hybrid graphics

Hi! I have a Acer TimelineX 5820TZG laptop which has switchable graphics. I am struggling to make Arch work with my dual-graphics configuration, and I have tried a lot of things, but it doesn't work.
Right now I am working with the Intel integrated graphics card but I am not even sure if the Ati is completely switched off (I am afraid it's not, as I read in a lot of posts about switchable graphics).
The first thing I did is installing the open-source drivers for ati (xf86-video-ati) and intel (xf86-video-intel). First I tried to make both cards to work by using the vgaswitcheroo method, I mounted debugfs, modprobed the radeon module and using:
cat /sys/kernel/debug/vgaswitcheroo/switch
I checked that the currently working card is the Intel integrated. I made sure the ATI is switched off by doing
echo OFF > /sys/kernel/debug/vgaswitcheroo/switch
(As explained in the wiki for hybrid graphics) and then started the X server. In this case the X server starts and sometimes even starts loading my WM (kde), but eventually the system gets frozen and all I can see is warning messages in the terminal (CPU #1 stuck for 23s!) and I am unable to use another terminal with Ctrl+Alt+Fx or soft-resetting. Some times it gets stuck on a loop, showing a lot of messages in the terminal and not allowing me to kill the process in any way.
Then I tried modprobing 'radeon' and then using
echo DDIC > /sys/kernel/debug/vgaswitcheroo/switch
to enable the dedicated graphics card (Ati) and turning off the integrated one (intel) to see what happens. In this case the X server simply crashes, leaving me with the following log:
187.209]
X.Org X Server 1.16.3
Release Date: 2014-12-20
[ 187.211] X Protocol Version 11, Revision 0
[ 187.213] Build Operating System: Linux 3.18.1-1-ARCH x86_64
[ 187.214] Current Operating System: Linux Alejandro-ArchPC 3.18.5-1-ARCH #1 SMP PREEMPT Fri Jan 30 07:31:50 CET 2015 x86_64
[ 187.214] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d5fd73a4-f13f-d001-10bd-71a4f13fd001 rw quiet
[ 187.218] Build Date: 29 December 2014 01:09:58PM
[ 187.219]
[ 187.220] Current version of pixman: 0.32.6
[ 187.223] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 187.223] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 187.228] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 4 16:17:27 2015
[ 187.275] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 187.276] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 187.276] (==) No Layout section. Using the first Screen section.
[ 187.276] (==) No screen section available. Using defaults.
[ 187.276] (**) |-->Screen "Default Screen Section" (0)
[ 187.276] (**) | |-->Monitor "<default monitor>"
[ 187.277] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 187.277] (==) Automatically adding devices
[ 187.277] (==) Automatically enabling devices
[ 187.277] (==) Automatically adding GPU devices
[ 187.277] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 187.277] Entry deleted from font path.
[ 187.277] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 187.277] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 187.277] Entry deleted from font path.
[ 187.277] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 187.277] Entry deleted from font path.
[ 187.277] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 187.277] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 187.277] Entry deleted from font path.
[ 187.277] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 187.277] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 187.277] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 187.277] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 187.277] (II) Loader magic: 0x818d80
[ 187.277] (II) Module ABI versions:
[ 187.277] X.Org ANSI C Emulation: 0.4
[ 187.277] X.Org Video Driver: 18.0
[ 187.277] X.Org XInput driver : 21.0
[ 187.277] X.Org Server Extension : 8.0
[ 187.280] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 187.280] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 187.281] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 8 paused 0
[ 187.281] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 187.282] (EE) systemd-logind: failed to take device /dev/dri/card0: Invalid argument
[ 187.283] (--) PCI:*(0:0:2:0) 8086:0046:1025:035d rev 18, Mem @ 0xd8000000/4194304, 0xc0000000/268435456, I/O @ 0x00004050/8
[ 187.283] (--) PCI: (0:1:0:0) 1002:68e0:1025:035d rev 0, Mem @ 0xe0000000/134217728, 0xdc400000/131072, I/O @ 0x00005000/256, BIOS @ 0x????????/131072
[ 187.284] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 187.284] (II) LoadModule: "glx"
[ 187.338] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 187.504] (II) Module glx: vendor="X.Org Foundation"
[ 187.504] compiled for 1.16.3, module version = 1.0.0
[ 187.504] ABI class: X.Org Server Extension, version 8.0
[ 187.504] (==) AIGLX enabled
[ 187.504] (==) Matched ati as autoconfigured driver 0
[ 187.504] (==) Matched intel as autoconfigured driver 1
[ 187.504] (==) Matched modesetting as autoconfigured driver 2
[ 187.504] (==) Matched fbdev as autoconfigured driver 3
[ 187.504] (==) Matched vesa as autoconfigured driver 4
[ 187.504] (==) Assigned the driver to the xf86ConfigLayout
[ 187.504] (II) LoadModule: "ati"
[ 187.504] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 187.504] (II) Module ati: vendor="X.Org Foundation"
[ 187.504] compiled for 1.16.1, module version = 7.5.0
[ 187.504] Module class: X.Org Video Driver
[ 187.504] ABI class: X.Org Video Driver, version 18.0
[ 187.504] (II) LoadModule: "radeon"
[ 187.504] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 187.504] (II) Module radeon: vendor="X.Org Foundation"
[ 187.504] compiled for 1.16.1, module version = 7.5.0
[ 187.504] Module class: X.Org Video Driver
[ 187.504] ABI class: X.Org Video Driver, version 18.0
[ 187.504] (II) LoadModule: "intel"
[ 187.504] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 187.505] (II) Module intel: vendor="X.Org Foundation"
[ 187.505] compiled for 1.16.3, module version = 2.99.917
[ 187.505] Module class: X.Org Video Driver
[ 187.505] ABI class: X.Org Video Driver, version 18.0
[ 187.505] (II) LoadModule: "modesetting"
[ 187.600] (WW) Warning, couldn't open module modesetting
[ 187.601] (II) UnloadModule: "modesetting"
[ 187.601] (II) Unloading modesetting
[ 187.601] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 187.601] (II) LoadModule: "fbdev"
[ 187.601] (WW) Warning, couldn't open module fbdev
[ 187.601] (II) UnloadModule: "fbdev"
[ 187.601] (II) Unloading fbdev
[ 187.601] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 187.601] (II) LoadModule: "vesa"
[ 187.601] (WW) Warning, couldn't open module vesa
[ 187.601] (II) UnloadModule: "vesa"
[ 187.601] (II) Unloading vesa
[ 187.601] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 187.601] (II) RADEON: Driver for ATI Radeon chipsets:
<LIST OF CARDS>
[ 187.606] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 187.607] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 187.607] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 187.607] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 187.607] (++) using VT number 1
[ 187.607] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 187.607] (II) [KMS] Kernel modesetting enabled.
[ 187.666] (EE) No devices detected.
[ 187.666] (EE)
Fatal server error:
[ 187.666] (EE) no screens found(EE)
[ 187.666] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 187.666] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 187.666] (EE)
As it didn't work this way, I tried using the closed-source driver for ATI, the one in the Vi0L0 repository. I created the xorg.conf file using aticonfig --initial as suggested in the wiki. the result was Xserver crashing again, leaving me with the following log (which suggests that my system is not compatible with PxP tech by AMD and that I should not use the fglrx driver).
[ 2455.881]
X.Org X Server 1.16.3
Release Date: 2014-12-20
[ 2455.885] X Protocol Version 11, Revision 0
[ 2455.887] Build Operating System: Linux 3.18.1-1-ARCH x86_64
[ 2455.888] Current Operating System: Linux Alejandro-ArchPC 3.18.5-1-ARCH #1 SMP PREEMPT Fri Jan 30 07:31:50 CET 2015 x86_64
[ 2455.888] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d5fd73a4-f13f-d001-10bd-71a4f13fd001 rw quiet
[ 2455.891] Build Date: 29 December 2014 01:09:58PM
[ 2455.892]
[ 2455.893] Current version of pixman: 0.32.6
[ 2455.896] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2455.896] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2455.901] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 4 19:38:17 2015
[ 2455.903] (==) Using config file: "/etc/X11/xorg.conf"
[ 2455.904] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2455.906] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2455.906] (==) ServerLayout "aticonfig Layout"
[ 2455.906] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 2455.906] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 2455.906] (**) | |-->Device "aticonfig-Device[0]-0"
[ 2455.906] (==) Automatically adding devices
[ 2455.906] (==) Automatically enabling devices
[ 2455.906] (==) Automatically adding GPU devices
[ 2455.906] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 2455.906] Entry deleted from font path.
[ 2455.906] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 2455.906] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2455.906] Entry deleted from font path.
[ 2455.906] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2455.906] Entry deleted from font path.
[ 2455.906] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2455.906] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2455.906] Entry deleted from font path.
[ 2455.906] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2455.906] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 2455.906] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2455.906] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2455.906] (II) Loader magic: 0x818d80
[ 2455.906] (II) Module ABI versions:
[ 2455.906] X.Org ANSI C Emulation: 0.4
[ 2455.906] X.Org Video Driver: 18.0
[ 2455.906] X.Org XInput driver : 21.0
[ 2455.906] X.Org Server Extension : 8.0
[ 2455.910] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[ 2455.910] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2455.911] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 2455.913] (--) PCI:*(0:0:2:0) 8086:0046:1025:035d rev 18, Mem @ 0xd8000000/4194304, 0xc0000000/268435456, I/O @ 0x00004050/8
[ 2455.913] (--) PCI: (0:1:0:0) 1002:68e0:1025:035d rev 0, Mem @ 0xe0000000/134217728, 0xdc400000/131072, I/O @ 0x00005000/256, BIOS @ 0x????????/131072
[ 2455.913] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2455.913] (II) "glx" will be loaded by default.
[ 2455.913] (II) LoadModule: "glx"
[ 2455.913] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2455.913] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 2455.913] compiled for 6.9.0, module version = 1.0.0
[ 2455.913] (II) LoadModule: "fglrx"
[ 2455.913] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 2455.943] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 2455.943] compiled for 1.4.99.906, module version = 14.50.2
[ 2455.943] Module class: X.Org Video Driver
[ 2455.944] (II) Loading sub module "fglrxdrm"
[ 2455.944] (II) LoadModule: "fglrxdrm"
[ 2455.944] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 2455.944] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 2455.944] compiled for 1.4.99.906, module version = 14.50.2
[ 2455.944] (II) AMD Proprietary Linux Driver Version Identifier:14.50.2
[ 2455.944] (II) AMD Proprietary Linux Driver Release Identifier: 14.501.1003
[ 2455.944] (II) AMD Proprietary Linux Driver Build Date: Nov 20 2014 21:22:54
[ 2455.944] (++) using VT number 2
[ 2455.944] (--) controlling tty is VT number 2, auto-enabling KeepTty
[ 2455.944] (WW) Falling back to old probe method for fglrx
[ 2455.959] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 2456.127] ukiDynamicMajor: found major device number 249
[ 2456.127] ukiDynamicMajor: found major device number 249
[ 2456.127] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 2456.127] ukiOpenDevice: node name is /dev/ati/card0
[ 2456.127] ukiOpenDevice: open result is 11, (OK)
[ 2461.962] ukiOpenDevice: open result is 11, (OK)
[ 2461.963] ukiOpenByBusid: ukiOpenMinor returns 11
[ 2461.963] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 2461.965] (--) Chipset Supported AMD Graphics Processor (0x68E0) found
[ 2461.965] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 2461.965] (II) fglrx: intel VGA device detected, load intel driver.
[ 2461.966] (II) LoadModule: "intel"
[ 2461.966] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 2461.966] (II) Module intel: vendor="X.Org Foundation"
[ 2461.966] compiled for 1.16.3, module version = 2.99.917
[ 2461.966] Module class: X.Org Video Driver
[ 2461.966] ABI class: X.Org Video Driver, version 18.0
[ 2461.966] (WW) PowerXpress feature is not supported on A+I Mux platform. Please uninstall fglrx driver.
[ 2461.966] (EE) this is a Muxless PX A+I platform, we doesn't supported it
[ 2461.966] (EE) No devices detected.
[ 2461.966] (EE)
Fatal server error:
[ 2461.966] (EE) no screens found(EE)
[ 2461.966] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 2461.966] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 2461.966] (EE)
So I came back to open-source drivers and right now I am working with radeon driver blacklisted and only using the intel driver, but as the radeon is blacklisted, vgaswitcheroo is not created and I don't know if mi ATI card is completely switched off.
As you can see, I have done the stuff suggested in the Acer TimelineX wiki page and it didn't work. I have also tried some other suggested actions I found but still can't get my switchable graphics to work.
I would really like to get both my cards to work completely, so I can switch graphics and restart the X server to get better performance or enhance my batt life depending on which GPU I am using; but at this point I am just fine with turning off the ATI card completely and just work with the intel one (though if there is a method for making both work, I prefer that than just turning a card off).
Sorry for my english!!

Xabre wrote:
Bit offtopic, but when you see a sentence like this:
[ 2461.966] (EE) this is a Muxless PX A+I platform, we doesn't supported it
how can you expect anything from the driver?
You are right, that's why I said that it suggest that my system is not compatible with fglrx. I don't understand why the warning just before that error line says that I should uninstall fglrx because my system is Muxed and that line says that my system is muxless...
Anyways, it doesn't matter, the fact is that fglrx doesn't work, so I will be using the open-source drivers...

Similar Messages

HP G-72 Video driver UPDATE (ATI Mobility Radeon HD 5470)

Hi...
Pleas I need latest video driver for my GPU Ati Mobility Radeon 5470...win7 64bit
I found only driver of 2010 (sp 50231) and I need the newer...
When I download for example Catalyst 13.9...with graphics driver and install, switchable graphics stop working...
Pleas can you help me? Witch product I can download?
Thx so much
This question was solved.
View Solution.

Hi Sirec,
Please let me know what is your model number and current operating system?
Here is a link that will help you find that out.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00033108&lc=en&cc=us&dlc=en
Please let me know.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

G62 mobility radeon 5470 not working

Hi, i have been using HP G62-b45SE notebook with ATI mobility Radeon 5470 and an intel integrated video processor.Few months ago problems started to appear when notebook switched to Radeon when plugged in ac.Couple of times i got blue scrren but i didnot read the dump.I upgraded the bios from the hp site for my notebook and reinstalled the ATI driver.Now when I boot my notebook it shows black screen and nothing else everything else comes on keyboard works and I can hear the login music also.This problem is constan now.Several times I did manage to boot with ATI radeon active since its hybrid
switches from one gpu to other.Now the problem is constant.When I uninstalled the ATI driver in windows 7 safe mode it booted successfully.I even reinstalled my win7 but no success either.I suspect its a hardware problem that requires mother board to be changed. But Iam not sure.
Any help in this regard will be appreciated.

Hi:
According to the support and driver page for your model, this is the only graphics driver that should work.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-93513-1&cc=us&dlc=en&lc=en&...
This driver installs the drivers for both the Intel and AMD graphics devices.
You cannot install any other driver (such as a separate Intel or separate AMD driver).
if the above driver doesn't work, unfortunately, I wouldn't know why.

Problem with Intel/ATI Hybrid Graphics

Hi, I Just got a new laptop with the intel(hd4400)/ati(hd8670m) hybrid graphics. I followed exactly this https://wiki.archlinux.org/index.php/Hy … ons_So_Far, trying to disable my discrete card, but I did not have vgaswitcheroo under /sys/kernel/debug. Then I did a reboot, it stopped booting after FSCK, no login for me. I did add radeon and i915 to MODULES in /etc/mkinitcpio.conf if that's what you are wondering. I had to chroot with Arch installer and add a basic 20-intel.conf file to be able to boot into my DE.
dmesg output below shows that I had radeon loaded, but still no vgaswitcheroo directory.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.11.6-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.1 20130725 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/vg_tf-lv_root rw quiet radeon.dpm=1
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000094d5ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000094d60000-0x0000000095d5ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000095d60000-0x000000009a36efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009a36f000-0x000000009aebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x9affe000 ACPI 2.0=0x9affe014 SMBIOS=0x9aebef98
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000006f000) (0MB)
[ 0.000000] efi: mem02: type=0, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
[ 0.000000] efi: mem03: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem04: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem05: type=0, attr=0xf, range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001051000) (15MB)
[ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000001051000-0x0000000002000000) (15MB)
[ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002f51000) (15MB)
[ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000002f51000-0x000000003737a000) (836MB)
[ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x000000003737a000-0x00000000379b5000) (6MB)
[ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x00000000379b5000-0x000000006d8c0000) (863MB)
[ 0.000000] efi: mem12: type=2, attr=0xf, range=[0x000000006d8c0000-0x0000000092d70000) (596MB)
[ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x0000000092d70000-0x0000000092d90000) (0MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000092d90000-0x0000000093ee1000) (17MB)
[ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x0000000093ee1000-0x0000000094d60000) (14MB)
[ 0.000000] efi: mem16: type=0, attr=0xf, range=[0x0000000094d60000-0x0000000095d60000) (16MB)
[ 0.000000] efi: mem17: type=7, attr=0xf, range=[0x0000000095d60000-0x0000000095f52000) (1MB)
[ 0.000000] efi: mem18: type=1, attr=0xf, range=[0x0000000095f52000-0x0000000095f6f000) (0MB)
[ 0.000000] efi: mem19: type=7, attr=0xf, range=[0x0000000095f6f000-0x0000000097260000) (18MB)
[ 0.000000] efi: mem20: type=4, attr=0xf, range=[0x0000000097260000-0x0000000097262000) (0MB)
[ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x0000000097262000-0x0000000097272000) (0MB)
[ 0.000000] efi: mem22: type=2, attr=0xf, range=[0x0000000097272000-0x000000009727c000) (0MB)
[ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x000000009727c000-0x0000000097c77000) (9MB)
[ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x0000000097c77000-0x0000000097c7a000) (0MB)
[ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x0000000097c7a000-0x0000000097c81000) (0MB)
[ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x0000000097c81000-0x0000000097c82000) (0MB)
[ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x0000000097c82000-0x0000000097db2000) (1MB)
[ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x0000000097db2000-0x0000000097db3000) (0MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x0000000097db3000-0x0000000097e0a000) (0MB)
[ 0.000000] efi: mem30: type=3, attr=0xf, range=[0x0000000097e0a000-0x0000000097e17000) (0MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x0000000097e17000-0x0000000097e1f000) (0MB)
[ 0.000000] efi: mem32: type=3, attr=0xf, range=[0x0000000097e1f000-0x0000000097e20000) (0MB)
[ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x0000000097e20000-0x0000000097e2c000) (0MB)
[ 0.000000] efi: mem34: type=3, attr=0xf, range=[0x0000000097e2c000-0x0000000097e34000) (0MB)
[ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x0000000097e34000-0x0000000097e4c000) (0MB)
[ 0.000000] efi: mem36: type=7, attr=0xf, range=[0x0000000097e4c000-0x0000000097e4d000) (0MB)
[ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x0000000097e4d000-0x0000000097e50000) (0MB)
[ 0.000000] efi: mem38: type=3, attr=0xf, range=[0x0000000097e50000-0x0000000097e57000) (0MB)
[ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x0000000097e57000-0x0000000097e6e000) (0MB)
[ 0.000000] efi: mem40: type=3, attr=0xf, range=[0x0000000097e6e000-0x0000000097ee9000) (0MB)
[ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x0000000097ee9000-0x0000000097efc000) (0MB)
[ 0.000000] efi: mem42: type=7, attr=0xf, range=[0x0000000097efc000-0x0000000097efd000) (0MB)
[ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x0000000097efd000-0x0000000097f0b000) (0MB)
[ 0.000000] efi: mem44: type=7, attr=0xf, range=[0x0000000097f0b000-0x0000000097f0d000) (0MB)
[ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x0000000097f0d000-0x000000009810f000) (2MB)
[ 0.000000] efi: mem46: type=3, attr=0xf, range=[0x000000009810f000-0x0000000098111000) (0MB)
[ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x0000000098111000-0x0000000099f6f000) (30MB)
[ 0.000000] efi: mem48: type=3, attr=0xf, range=[0x0000000099f6f000-0x000000009a36f000) (4MB)
[ 0.000000] efi: mem49: type=5, attr=0x800000000000000f, range=[0x000000009a36f000-0x000000009a56f000) (2MB)
[ 0.000000] efi: mem50: type=6, attr=0x800000000000000f, range=[0x000000009a56f000-0x000000009aabf000) (5MB)
[ 0.000000] efi: mem51: type=0, attr=0xf, range=[0x000000009aabf000-0x000000009aebf000) (4MB)
[ 0.000000] efi: mem52: type=10, attr=0xf, range=[0x000000009aebf000-0x000000009afbf000) (1MB)
[ 0.000000] efi: mem53: type=9, attr=0xf, range=[0x000000009afbf000-0x000000009afff000) (0MB)
[ 0.000000] efi: mem54: type=4, attr=0xf, range=[0x000000009afff000-0x000000009b000000) (0MB)
[ 0.000000] efi: mem55: type=7, attr=0xf, range=[0x0000000100000000-0x000000015f600000) (1526MB)
[ 0.000000] efi: mem56: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem57: type=0, attr=0x0, range=[0x000000009b000000-0x000000009fa00000) (74MB)
[ 0.000000] efi: mem58: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[ 0.000000] efi: mem59: type=0, attr=0x0, range=[0x00000000fe101000-0x00000000fe113000) (0MB)
[ 0.000000] efi: mem60: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb10000) (0MB)
[ 0.000000] efi: mem61: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem62: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed1c000) (0MB)
[ 0.000000] efi: mem63: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem64: type=11, attr=0x8000000000000001, range=[0x00000000fed20000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem65: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x0000000100000000) (4MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Dell Inc. Inspiron 3537/028XKX, BIOS A05 08/30/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x15f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 1 base 0080000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 009B000000 mask 7FFF000000 uncachable
[ 0.000000] 3 base 009C000000 mask 7FFC000000 uncachable
[ 0.000000] 4 base 00FFC00000 mask 7FFFC00000 write-protect
[ 0.000000] 5 base 0100000000 mask 7F80000000 write-back
[ 0.000000] 6 base 015F600000 mask 7FFFE00000 uncachable
[ 0.000000] 7 base 015F800000 mask 7FFF800000 uncachable
[ 0.000000] 8 base 0160000000 mask 7FE0000000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff88000007e000] 7e000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02b2f000, 0x02b2ffff] PGTABLE
[ 0.000000] BRK [0x02b30000, 0x02b30fff] PGTABLE
[ 0.000000] BRK [0x02b31000, 0x02b31fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x15f400000-0x15f5fffff]
[ 0.000000] [mem 0x15f400000-0x15f5fffff] page 2M
[ 0.000000] BRK [0x02b32000, 0x02b32fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x15c000000-0x15f3fffff]
[ 0.000000] [mem 0x15c000000-0x15f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
[ 0.000000] [mem 0x100000000-0x13fffffff] page 1G
[ 0.000000] [mem 0x140000000-0x15bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x94d5ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x94bfffff] page 2M
[ 0.000000] [mem 0x94c00000-0x94d5ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x95d60000-0x9a36efff]
[ 0.000000] [mem 0x95d60000-0x95dfffff] page 4k
[ 0.000000] [mem 0x95e00000-0x9a1fffff] page 2M
[ 0.000000] [mem 0x9a200000-0x9a36efff] page 4k
[ 0.000000] BRK [0x02b33000, 0x02b33fff] PGTABLE
[ 0.000000] BRK [0x02b34000, 0x02b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x9afff000-0x9affffff]
[ 0.000000] [mem 0x9afff000-0x9affffff] page 4k
[ 0.000000] RAMDISK: [mem 0x3737a000-0x379b4fff]
[ 0.000000] ACPI: RSDP 000000009affe014 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 000000009affe210 000AC (v01 DELL CL09 00000001 01000013)
[ 0.000000] ACPI: FACP 000000009aff8000 0010C (v05 DELL CL09 00000001 ASL 00040000)
[ 0.000000] ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20130517/tbfadt-202)
[ 0.000000] ACPI: DSDT 000000009afe9000 0B8AC (v01 DELL CL09 00000000 ASL 00040000)
[ 0.000000] ACPI: FACS 000000009afb8000 00040
[ 0.000000] ACPI: SLIC 000000009affd000 00176 (v01 DELL CL09 00000001 ASL 00040000)
[ 0.000000] ACPI: UEFI 000000009affc000 00236 (v01 DELL CL09 00000001 ASL 00040000)
[ 0.000000] ACPI: FPDT 000000009affa000 00044 (v01 DELL CL09 00000001 ASL 00040000)
[ 0.000000] ACPI: ASF! 000000009aff9000 000A5 (v32 DELL CL09 00000001 ASL 00040000)
[ 0.000000] ACPI: HPET 000000009aff7000 00038 (v01 DELL CL09 00000001 ASL 00040000)
[ 0.000000] ACPI: APIC 000000009aff6000 0008C (v03 DELL CL09 00000001 ASL 00040000)
[ 0.000000] ACPI: MCFG 000000009aff5000 0003C (v01 DELL CL09 00000001 ASL 00040000)
[ 0.000000] ACPI: SSDT 000000009afe8000 006FE (v01 COMPAL CRV ORB 00001000 ACPI 00040000)
[ 0.000000] ACPI: BOOT 000000009afe6000 00028 (v01 DELL CL09 00000001 ASL 00040000)
[ 0.000000] ACPI: ASPT 000000009afe4000 00034 (v07 DELL CL09 00000001 ASL 00040000)
[ 0.000000] ACPI: DBGP 000000009afe3000 00034 (v01 DELL CL09 00000001 ASL 00040000)
[ 0.000000] ACPI: SSDT 000000009afdd000 00539 (v01 COMPAL CRV ORB 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009afdc000 00AD8 (v01 COMPAL CRV ORB 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009afd8000 0343C (v01 COMPAL CRV ORB 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009afd5000 01E3D (v01 COMPAL CRV ORB 00001000 ACPI 00040000)
[ 0.000000] ACPI: BGRT 000000009afd7000 00038 (v01 DELL CL09 00000001 ASL 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000015f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x15f5fffff]
[ 0.000000] NODE_DATA [mem 0x15f5f8000-0x15f5fcfff]
[ 0.000000] [ffffea0000000000-ffffea00057fffff] PMD -> [ffff88015ac00000-ffff88015ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x15f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0006efff]
[ 0.000000] node 0: [mem 0x00070000-0x00087fff]
[ 0.000000] node 0: [mem 0x00100000-0x94d5ffff]
[ 0.000000] node 0: [mem 0x95d60000-0x9a36efff]
[ 0.000000] node 0: [mem 0x9afff000-0x9affffff]
[ 0.000000] node 0: [mem 0x100000000-0x15f5fffff]
[ 0.000000] On node 0 totalpages: 1018102
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3974 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9742 pages used for memmap
[ 0.000000] DMA32 zone: 623472 pages, LIFO batch:31
[ 0.000000] Normal zone: 6104 pages used for memmap
[ 0.000000] Normal zone: 390656 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 56
[ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x94d60000-0x95d5ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9a36f000-0x9aebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88015f200000 s86528 r8192 d24064 u262144
[ 0.000000] pcpu-alloc: s86528 r8192 d24064 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1002170
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/vg_tf-lv_root rw quiet radeon.dpm=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3856592K/4072408K available (5050K kernel code, 799K rwdata, 1696K rodata, 1140K init, 1288K bss, 215816K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:8448 nr_irqs:1016 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2294.570 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4590.35 BogoMIPS (lpj=7648566)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000040] init_memory_mapping: [mem 0x9a36f000-0x9a56efff]
[ 0.000042] [mem 0x9a36f000-0x9a56efff] page 4k
[ 0.000064] init_memory_mapping: [mem 0x9a56f000-0x9aabefff]
[ 0.000066] [mem 0x9a56f000-0x9a5fffff] page 4k
[ 0.000067] [mem 0x9a600000-0x9a9fffff] page 2M
[ 0.000069] [mem 0x9aa00000-0x9aabefff] page 4k
[ 0.059748] Security Framework initialized
[ 0.059759] AppArmor: AppArmor disabled by boot time parameter
[ 0.059761] Yama: becoming mindful.
[ 0.060120] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.061320] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.061810] Mount-cache hash table entries: 256
[ 0.062052] Initializing cgroup subsys memory
[ 0.062063] Initializing cgroup subsys devices
[ 0.062065] Initializing cgroup subsys freezer
[ 0.062067] Initializing cgroup subsys net_cls
[ 0.062069] Initializing cgroup subsys blkio
[ 0.062098] CPU: Physical Processor ID: 0
[ 0.062100] CPU: Processor Core ID: 0
[ 0.062105] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.063398] mce: CPU supports 7 MCE banks
[ 0.063415] CPU0: Thermal monitoring enabled (TM1)
[ 0.063429] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
[ 0.063562] Freeing SMP alternatives memory: 20K (ffffffff819e6000 - ffffffff819eb000)
[ 0.064699] ACPI: Core revision 20130517
[ 0.077923] ACPI: All ACPI Tables successfully acquired
[ 0.083767] ftrace: allocating 20100 entries in 79 pages
[ 0.096243] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.129231] smpboot: CPU0: Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz (fam: 06, model: 45, stepping: 01)
[ 0.129240] TSC deadline timer enabled
[ 0.129252] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.129261] ... version: 3
[ 0.129262] ... bit width: 48
[ 0.129263] ... generic registers: 4
[ 0.129265] ... value mask: 0000ffffffffffff
[ 0.129267] ... max period: 0000ffffffffffff
[ 0.129268] ... fixed-purpose events: 3
[ 0.129269] ... event mask: 000000070000000f
[ 0.167457] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.152681] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.209878] Brought up 4 CPUs
[ 0.209882] smpboot: Total of 4 processors activated (18363.41 BogoMIPS)
[ 0.215147] devtmpfs: initialized
[ 0.216459] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
[ 0.217451] RTC time: 2:22:13, date: 11/08/13
[ 0.217501] NET: Registered protocol family 16
[ 0.217661] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.217663] ACPI: bus type PCI registered
[ 0.217666] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.217737] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.217740] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.252752] PCI: Using configuration type 1 for base access
[ 0.252922] dmi type 0xB1 record - unknown flag
[ 0.253726] bio: create slab <bio-0> at 0
[ 0.253868] ACPI: Added _OSI(Module Device)
[ 0.253870] ACPI: Added _OSI(Processor Device)
[ 0.253872] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.253874] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.256659] ACPI: EC: Look up EC in DSDT
[ 0.259524] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.272874] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.274013] ACPI: SSDT 000000009ae7dc18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
[ 0.274706] ACPI: Dynamic OEM Table Load:
[ 0.274709] ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
[ 0.282313] ACPI: SSDT 000000009ae7d618 005AA (v01 PmRef ApIst 00003000 INTL 20130117)
[ 0.283108] ACPI: Dynamic OEM Table Load:
[ 0.283111] ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20130117)
[ 0.301675] ACPI: SSDT 000000009ae7cd98 00119 (v01 PmRef ApCst 00003000 INTL 20130117)
[ 0.302368] ACPI: Dynamic OEM Table Load:
[ 0.302370] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20130117)
[ 0.431586] ACPI: Interpreter enabled
[ 0.431597] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[ 0.431606] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[ 0.431630] ACPI: (supports S0 S3 S4 S5)
[ 0.431632] ACPI: Using IOAPIC for interrupt routing
[ 0.431666] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.431855] ACPI: No dock devices found.
[ 0.634551] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.634846] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.635302] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
[ 0.635816] PCI host bridge to bus 0000:00
[ 0.635820] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.635823] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.635825] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.635828] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.635830] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.635832] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.635834] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.635836] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 0.635838] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.635840] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.635842] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.635844] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.635846] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.635848] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.635850] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.635852] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.635854] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.635856] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
[ 0.635867] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.636037] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 0.636053] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
[ 0.636062] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.636069] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
[ 0.636232] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.636243] pci 0000:00:03.0: reg 0x10: [mem 0xc0810000-0xc0813fff 64bit]
[ 0.636435] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.636456] pci 0000:00:14.0: reg 0x10: [mem 0xc0800000-0xc080ffff 64bit]
[ 0.636523] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.636647] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.636693] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.636717] pci 0000:00:16.0: reg 0x10: [mem 0xc0818000-0xc081801f 64bit]
[ 0.636795] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.636949] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.636965] pci 0000:00:1b.0: reg 0x10: [mem 0xc0814000-0xc0817fff 64bit]
[ 0.637037] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.637182] pci 0000:00:1c.0: [8086:9c14] type 01 class 0x060400
[ 0.637255] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.637400] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.637446] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 0.637518] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.637662] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
[ 0.637734] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.637885] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.638879] pci 0000:00:1d.0: reg 0x10: [mem 0xc081c000-0xc081c3ff]
[ 0.644729] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.644857] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.644903] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.645161] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.645179] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
[ 0.645188] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
[ 0.645196] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
[ 0.645205] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
[ 0.645213] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
[ 0.645222] pci 0000:00:1f.2: reg 0x24: [mem 0xc081b000-0xc081b7ff]
[ 0.645264] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.645401] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.645417] pci 0000:00:1f.3: reg 0x10: [mem 0xc0819000-0xc08190ff 64bit]
[ 0.645440] pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f]
[ 0.645679] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
[ 0.645710] pci 0000:01:00.0: reg 0x10: [io 0x4000-0x40ff]
[ 0.645750] pci 0000:01:00.0: reg 0x18: [mem 0xc0700000-0xc0700fff 64bit]
[ 0.645779] pci 0000:01:00.0: reg 0x20: [mem 0xc0400000-0xc0403fff 64bit pref]
[ 0.645873] pci 0000:01:00.0: supports D1 D2
[ 0.645875] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.652308] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.652312] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.652316] pci 0000:00:1c.0: bridge window [mem 0xc0700000-0xc07fffff]
[ 0.652322] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.652414] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000
[ 0.652447] pci 0000:02:00.0: reg 0x10: [mem 0xc0600000-0xc067ffff 64bit]
[ 0.652527] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.652608] pci 0000:02:00.0: supports D1 D2
[ 0.652610] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.658964] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.658970] pci 0000:00:1c.3: bridge window [mem 0xc0600000-0xc06fffff]
[ 0.659066] pci 0000:03:00.0: [1002:6660] type 00 class 0x038000
[ 0.659093] pci 0000:03:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.659113] pci 0000:03:00.0: reg 0x18: [mem 0xc0500000-0xc053ffff 64bit]
[ 0.659127] pci 0000:03:00.0: reg 0x20: [io 0x3000-0x30ff]
[ 0.659154] pci 0000:03:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 0.659233] pci 0000:03:00.0: supports D1 D2
[ 0.659235] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[ 0.665628] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.665632] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.665636] pci 0000:00:1c.4: bridge window [mem 0xc0500000-0xc05fffff]
[ 0.665642] pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.665658] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.726347] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.726411] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.726470] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.726529] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.726588] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.726646] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.726705] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.726765] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.727383] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 0.727392] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.727488] Found 1 acpi root devices
[ 0.727533] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.727642] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.727647] vgaarb: loaded
[ 0.727648] vgaarb: bridge control possible 0000:00:02.0
[ 0.727700] PCI: Using ACPI for IRQ routing
[ 0.734096] PCI: pci_cache_line_size set to 64 bytes
[ 0.734149] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[ 0.734151] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 0.734152] e820: reserve RAM buffer [mem 0x94d60000-0x97ffffff]
[ 0.734154] e820: reserve RAM buffer [mem 0x9a36f000-0x9bffffff]
[ 0.734157] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
[ 0.734158] e820: reserve RAM buffer [mem 0x15f600000-0x15fffffff]
[ 0.734265] NetLabel: Initializing
[ 0.734267] NetLabel: domain hash size = 128
[ 0.734268] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.734282] NetLabel: unlabeled traffic allowed by default
[ 0.734302] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.734309] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.736336] Switched to clocksource hpet
[ 0.741791] pnp: PnP ACPI init
[ 0.741808] ACPI: bus type PNP registered
[ 0.741844] pnp 00:00: [dma 4]
[ 0.741872] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.741898] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.742037] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.742091] system 00:03: [io 0x0680-0x069f] has been reserved
[ 0.742094] system 00:03: [io 0xfd60-0xfd63] has been reserved
[ 0.742096] system 00:03: [io 0xffff] has been reserved
[ 0.742099] system 00:03: [io 0xffff] has been reserved
[ 0.742101] system 00:03: [io 0xffff] has been reserved
[ 0.742103] system 00:03: [io 0x1800-0x18fe] could not be reserved
[ 0.742106] system 00:03: [io 0x164e-0x164f] has been reserved
[ 0.742109] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.742169] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.742223] system 00:05: [io 0x1854-0x1857] has been reserved
[ 0.742227] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.742290] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.742323] pnp 00:07: Plug and Play ACPI device, IDs DLL05eb PNP0f13 (active)
[ 0.799825] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.799828] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.799831] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.799833] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.799836] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.799838] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.799840] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.799843] system 00:08: [mem 0xff000000-0xff000fff] has been reserved
[ 0.799845] system 00:08: [mem 0xff010000-0xffffffff] could not be reserved
[ 0.799848] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.799850] system 00:08: [mem 0x9fa22000-0x9fa22fff] has been reserved
[ 0.799853] system 00:08: [mem 0x9fa10000-0x9fa1ffff] has been reserved
[ 0.799856] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.800510] pnp: PnP ACPI: found 9 devices
[ 0.800512] ACPI: bus type PNP unregistered
[ 0.807188] pci 0000:02:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[ 0.807192] pci 0000:03:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.807227] pci 0000:00:1c.3: BAR 15: assigned [mem 0x9fb00000-0x9fbfffff pref]
[ 0.807230] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.807234] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.807240] pci 0000:00:1c.0: bridge window [mem 0xc0700000-0xc07fffff]
[ 0.807244] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.807251] pci 0000:02:00.0: BAR 6: assigned [mem 0x9fb00000-0x9fb0ffff pref]
[ 0.807254] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.807259] pci 0000:00:1c.3: bridge window [mem 0xc0600000-0xc06fffff]
[ 0.807263] pci 0000:00:1c.3: bridge window [mem 0x9fb00000-0x9fbfffff pref]
[ 0.807270] pci 0000:03:00.0: BAR 6: assigned [mem 0xc0540000-0xc055ffff pref]
[ 0.807272] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.807275] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.807280] pci 0000:00:1c.4: bridge window [mem 0xc0500000-0xc05fffff]
[ 0.807285] pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.807584] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.807586] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.807589] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.807591] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.807593] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.807595] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.807597] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.807599] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.807601] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.807603] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.807605] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.807607] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.807609] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.807611] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.807613] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 0.807615] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[ 0.807617] pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff]
[ 0.807619] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.807622] pci_bus 0000:01: resource 1 [mem 0xc0700000-0xc07fffff]
[ 0.807624] pci_bus 0000:01: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.807626] pci_bus 0000:02: resource 1 [mem 0xc0600000-0xc06fffff]
[ 0.807628] pci_bus 0000:02: resource 2 [mem 0x9fb00000-0x9fbfffff pref]
[ 0.807630] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.807632] pci_bus 0000:03: resource 1 [mem 0xc0500000-0xc05fffff]
[ 0.807635] pci_bus 0000:03: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.807677] NET: Registered protocol family 2
[ 0.807890] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.808027] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.808127] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.808150] TCP: reno registered
[ 0.808162] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.808181] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.808261] NET: Registered protocol family 1
[ 0.808274] pci 0000:00:02.0: Boot video device
[ 0.823082] PCI: CLS 64 bytes, default 64
[ 0.823122] Unpacking initramfs...
[ 0.982411] Freeing initrd memory: 6380K (ffff88003737a000 - ffff8800379b5000)
[ 0.982417] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.982420] software IO TLB [mem 0x8ed70000-0x92d70000] (64MB) mapped at [ffff88008ed70000-ffff880092d6ffff]
[ 0.982447] Simple Boot Flag at 0x44 set to 0x1
[ 0.982626] Scanning for low memory corruption every 60 seconds
[ 0.982970] audit: initializing netlink socket (disabled)
[ 0.982981] type=2000 audit(1383877333.966:1): initialized
[ 1.000018] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.001570] zbud: loaded
[ 1.001748] VFS: Disk quotas dquot_6.5.2
[ 1.001801] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.001998] msgmni has been set to 7672
[ 1.002265] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.002308] io scheduler noop registered
[ 1.002311] io scheduler deadline registered
[ 1.002344] io scheduler cfq registered (default)
[ 1.002441] pcieport 0000:00:1c.0: irq 56 for MSI/MSI-X
[ 1.002526] pcieport 0000:00:1c.3: irq 57 for MSI/MSI-X
[ 1.002598] pcieport 0000:00:1c.4: irq 58 for MSI/MSI-X
[ 1.002681] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 1.002684] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.002688] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 1.002706] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 1.002708] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.002712] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 1.002728] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 1.002730] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.002734] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 1.002751] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.002769] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.002888] efifb: probing for efifb
[ 1.003509] efifb: framebuffer at 0xb0000000, mapped to 0xffffc90020e00000, using 4160k, total 4160k
[ 1.003511] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 1.003513] efifb: scrolling: redraw
[ 1.003515] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.007477] Console: switching to colour frame buffer device 170x48
[ 1.011265] fb0: EFI VGA frame buffer device
[ 1.011272] intel_idle: MWAIT substates: 0x11142120
[ 1.011274] intel_idle: v0.4 model 0x45
[ 1.011275] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.011336] GHES: HEST is not enabled!
[ 1.011398] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.011946] Linux agpgart interface v0.103
[ 1.012027] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.032274] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.032308] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.032411] mousedev: PS/2 mouse device common for all mice
[ 1.032672] rtc_cmos 00:04: RTC can wake from S4
[ 1.032819] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.032857] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.032871] Intel P-state driver initializing.
[ 1.032884] Intel pstate controlling: cpu 0
[ 1.032911] Intel pstate controlling: cpu 1
[ 1.032923] Intel pstate controlling: cpu 2
[ 1.032935] Intel pstate controlling: cpu 3
[ 1.033105] cpuidle: using governor ladder
[ 1.033295] cpuidle: using governor menu
[ 1.033356] drop_monitor: Initializing network drop monitor service
[ 1.033431] TCP: cubic registered
[ 1.033524] NET: Registered protocol family 10
[ 1.033688] NET: Registered protocol family 17
[ 1.033697] Key type dns_resolver registered
[ 1.033905] PM: Hibernation image not present or could not be loaded.
[ 1.033915] registered taskstats version 1
[ 1.034407] Magic number: 5:662:358
[ 1.034483] rtc_cmos 00:04: setting system clock to 2013-11-08 02:22:14 UTC (1383877334)
[ 1.035212] Freeing unused kernel memory: 1140K (ffffffff818c9000 - ffffffff819e6000)
[ 1.035213] Write protecting the kernel read-only data: 8192k
[ 1.037442] Freeing unused kernel memory: 1084K (ffff8800024f1000 - ffff880002600000)
[ 1.038163] Freeing unused kernel memory: 352K (ffff8800027a8000 - ffff880002800000)
[ 1.045866] systemd-udevd[57]: starting version 208
[ 1.050291] [drm] Initialized drm 1.1.0 20060810
[ 1.053926] [drm] radeon kernel modesetting enabled.
[ 1.053955] checking generic (b0000000 410000) vs hw (a0000000 10000000)
[ 1.053962] radeon 0000:03:00.0: enabling device (0000 -> 0003)
[ 1.054153] [drm] initializing kernel modesetting (HAINAN 0x1002:0x6660 0x1028:0x05EA).
[ 1.054190] [drm] register mmio base: 0xC0500000
[ 1.054191] [drm] register mmio size: 262144
[ 1.055856] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.982382] tsc: Refined TSC clocksource calibration: 2294.688 MHz
[ 2.566653] ATOM BIOS: Dell
[ 2.566668] [drm] GPU not posted. posting now...
[ 2.570040] radeon 0000:03:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 2.570042] radeon 0000:03:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[ 2.570044] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 2.570045] [drm] RAM width 64bits DDR
[ 2.570094] [TTM] Zone kernel: Available graphics memory: 1965320 kiB
[ 2.570095] [TTM] Initializing pool allocator
[ 2.570099] [TTM] Initializing DMA pool allocator
[ 2.570117] [drm] radeon: 1024M of VRAM memory ready
[ 2.570118] [drm] radeon: 512M of GTT memory ready.
[ 2.570129] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 2.570456] [drm] probing gen 2 caps for device 8086:9c18 = 5323c42/0
[ 2.570460] [drm] PCIE gen 2 link speeds already enabled
[ 2.570620] [drm] Loading HAINAN Microcode
[ 2.981834] Switched to clocksource tsc
[ 2.993997] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 2.994098] radeon 0000:03:00.0: WB enabled
[ 2.994100] radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880156e63c00
[ 2.994102] radeon 0000:03:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff880156e63c04
[ 2.994103] radeon 0000:03:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff880156e63c08
[ 2.994104] radeon 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880156e63c0c
[ 2.994106] radeon 0000:03:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff880156e63c10
[ 2.994107] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.994108] [drm] Driver supports precise vblank timestamp query.
[ 2.994126] radeon 0000:03:00.0: irq 59 for MSI/MSI-X
[ 2.994137] radeon 0000:03:00.0: radeon: using MSI.
[ 2.994157] [drm] radeon: irq initialized.
[ 3.013688] [drm] ring test on 0 succeeded in 1 usecs
[ 3.013694] [drm] ring test on 1 succeeded in 1 usecs
[ 3.013698] [drm] ring test on 2 succeeded in 1 usecs
[ 3.013761] [drm] ring test on 3 succeeded in 2 usecs
[ 3.013770] [drm] ring test on 4 succeeded in 1 usecs
[ 3.015377] [drm] ib test on ring 0 succeeded in 0 usecs
[ 3.015424] [drm] ib test on ring 1 succeeded in 0 usecs
[ 3.015476] [drm] ib test on ring 2 succeeded in 0 usecs
[ 3.015496] [drm] ib test on ring 3 succeeded in 0 usecs
[ 3.015517] [drm] ib test on ring 4 succeeded in 1 usecs
[ 3.015656] [drm] Radeon Display Connectors
[ 3.015663] [drm] Internal thermal controller without fan control
[ 3.015712] [drm] probing gen 2 caps for device 8086:9c18 = 5323c42/0
[ 3.015739] == power state 0 ==
[ 3.015740] ui class: none
[ 3.015742] internal class: boot
[ 3.015744] caps:
[ 3.015746] uvd vclk: 0 dclk: 0
[ 3.015748] power level 0 sclk: 30000 mclk: 29900 vddc: 900 vddci: 0 pcie gen: 2
[ 3.015749] status: c r b
[ 3.015752] == power state 1 ==
[ 3.015753] ui class: performance
[ 3.015754] internal class: none
[ 3.015756] caps:
[ 3.015758] uvd vclk: 0 dclk: 0
[ 3.015760] power level 0 sclk: 30000 mclk: 30000 vddc: 800 vddci: 0 pcie gen: 2
[ 3.015761] power level 1 sclk: 40000 mclk: 90000 vddc: 875 vddci: 0 pcie gen: 2
[ 3.015763] power level 2 sclk: 75000 mclk: 90000 vddc: 950 vddci: 0 pcie gen: 2
[ 3.015765] power level 3 sclk: 90000 mclk: 90000 vddc: 1025 vddci: 0 pcie gen: 2
[ 3.015767] power level 4 sclk: 97500 mclk: 90000 vddc: 1075 vddci: 0 pcie gen: 2
[ 3.015768] status:
[ 3.015769] == power state 2 ==
[ 3.015771] ui class: battery
[ 3.015772] internal class: none
[ 3.015773] caps:
[ 3.015775] uvd vclk: 0 dclk: 0
[ 3.015777] power level 0 sclk: 30000 mclk: 30000 vddc: 800 vddci: 0 pcie gen: 2
[ 3.015778] power level 1 sclk: 40000 mclk: 60000 vddc: 850 vddci: 0 pcie gen: 2
[ 3.015780] power level 2 sclk: 40000 mclk: 60000 vddc: 850 vddci: 0 pcie gen: 2
[ 3.015781] status:
[ 3.023133] switching from power state:
[ 3.023135] ui class: none
[ 3.023136] internal class: boot
[ 3.023138] caps:
[ 3.023139] uvd vclk: 0 dclk: 0
[ 3.023141] power level 0 sclk: 30000 mclk: 29900 vddc: 900 vddci: 0 pcie gen: 2
[ 3.023142] status: c b
[ 3.023143] switching to power state:
[ 3.023144] ui class: performance
[ 3.023145] internal class: none
[ 3.023147] caps:
[ 3.023148] uvd vclk: 0 dclk: 0
[ 3.023149] power level 0 sclk: 30000 mclk: 30000 vddc: 800 vddci: 0 pcie gen: 2
[ 3.023151] power level 1 sclk: 40000 mclk: 90000 vddc: 875 vddci: 0 pcie gen: 2
[ 3.023152] power level 2 sclk: 75000 mclk: 90000 vddc: 950 vddci: 0 pcie gen: 2
[ 3.023154] power level 3 sclk: 90000 mclk: 90000 vddc: 1025 vddci: 0 pcie gen: 2
[ 3.023155] power level 4 sclk: 97500 mclk: 90000 vddc: 1075 vddci: 0 pcie gen: 2
[ 3.023156] status: r
[ 3.024470] [drm] radeon: dpm initialized
[ 3.024475] radeon 0000:03:00.0: No connectors reported connected with modes
[ 3.024477] [drm] Cannot find any crtc or sizes - going 1024x768
[ 3.026968] [drm] fb mappable at 0xA1150000
[ 3.026970] [drm] vram apper at 0xA0000000
[ 3.026971] [drm] size 3145728
[ 3.026972] [drm] fb depth is 24
[ 3.026973] [drm] pitch is 4096
[ 3.026976] checking generic (b0000000 410000) vs hw (a0000000 10000000)
[ 3.027040] radeon 0000:03:00.0: fb1: radeondrmfb frame buffer device
[ 3.027042] radeon 0000:03:00.0: registered panic notifier
[ 3.027053] [drm] Initialized radeon 2.34.0 20080528 for 0000:03:00.0 on minor 0
[ 3.027978] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0D:00/input/input1
[ 3.028026] ACPI: Lid Switch [LID0]
[ 3.028063] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input2
[ 3.028066] ACPI: Power Button [PWRB]
[ 3.028114] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.028116] ACPI: Power Button [PWRF]
[ 3.031882] [drm] Memory usable by graphics device = 2048M
[ 3.031886] checking generic (b0000000 410000) vs hw (b0000000 10000000)
[ 3.031888] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[ 3.031900] Console: switching to colour dummy device 80x25
[ 3.031959] i915 0000:00:02.0: setting latency timer to 64
[ 3.056716] i915 0000:00:02.0: irq 60 for MSI/MSI-X
[ 3.056723] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.056724] [drm] Driver supports precise vblank timestamp query.
[ 3.056784] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.101180] fbcon: inteldrmfb (fb0) is primary device
[ 4.361087] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 4.707482] Console: switching to colour frame buffer device 170x48
[ 4.712160] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 4.712553] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 4.713578] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[ 4.713584] ACPI Error: Method parse/execution failed [\_SB_.PCI0.RP05.PEGP.DD02._BCL] (Node ffff880159325d98), AE_NOT_FOUND (20130517/psparse-536)
[ 4.713871] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 4.713930] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2f/LNXVIDEO:00/input/input4
[ 4.715381] acpi device:55: registered as cooling_device0
[ 4.715415] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.715455] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5
[ 4.715487] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
[ 4.738967] ACPI: bus type USB registered
[ 4.738999] usbcore: registered new interface driver usbfs
[ 4.739016] usbcore: registered new interface driver hub
[ 4.739050] usbcore: registered new device driver usb
[ 4.739638] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 4.739642] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 4.739649] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 4.739721] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 4.739741] xhci_hcd 0000:00:14.0: irq 61 for MSI/MSI-X
[ 4.740145] xHCI xhci_add_endpoint called for root hub
[ 4.740148] xHCI xhci_check_bandwidth called for root hub
[ 4.740208] hub 1-0:1.0: USB hub found
[ 4.740218] hub 1-0:1.0: 9 ports detected
[ 4.741007] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.741164] ehci-pci: EHCI PCI platform driver
[ 4.742756] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 4.742760] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 4.743091] xHCI xhci_add_endpoint called for root hub
[ 4.743093] xHCI xhci_check_bandwidth called for root hub
[ 4.743135] hub 2-0:1.0: USB hub found
[ 4.743141] hub 2-0:1.0: 4 ports detected
[ 4.743425] SCSI subsystem initialized
[ 4.745035] ACPI: bus type ATA registered
[ 4.745122] libata version 3.00 loaded.
[ 4.747867] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 4.747875] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 4.747880] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 4.747891] ehci-pci 0000:00:1d.0: debug port 2
[ 4.751784] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 4.751800] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc081c000
[ 4.760774] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 4.760925] hub 3-0:1.0: USB hub found
[ 4.760930] hub 3-0:1.0: 2 ports detected
[ 4.761082] ahci 0000:00:1f.2: version 3.0
[ 4.761230] ahci 0000:00:1f.2: irq 62 for MSI/MSI-X
[ 4.774140] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl SATA mode
[ 4.774146] ahci 0000:00:1f.2: flags: 64bit ncq led clo only pio slum part deso sadm sds apst
[ 4.774151] ahci 0000:00:1f.2: setting latency timer to 64
[ 4.774614] scsi0 : ahci
[ 4.774722] scsi1 : ahci
[ 4.774798] scsi2 : ahci
[ 4.774868] ata1: SATA max UDMA/133 abar m2048@0xc081b000 port 0xc081b100 irq 62
[ 4.774871] ata2: SATA max UDMA/133 abar m2048@0xc081b000 port 0xc081b180 irq 62
[ 4.774873] ata3: DUMMY
[ 5.067345] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 5.094002] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.094032] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5.099568] ata2.00: ATAPI: PLDS DVD+/-RW DU-8A5HH, SD12, max UDMA/100
[ 5.100914] ata2.00: configured for UDMA/100
[ 5.129572] ata1.00: ATA-8: ST500LT012-1DG142, 0001SDM1, max UDMA/133
[ 5.129577] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 5.191169] hub 3-1:1.0: USB hub found
[ 5.191237] hub 3-1:1.0: 8 ports detected
[ 5.255854] ata1.00: configured for UDMA/133
[ 5.256061] scsi 0:0:0:0: Direct-Access ATA ST500LT012-1DG14 0001 PQ: 0 ANSI: 5
[ 5.261341] scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DU-8A5HH SD12 PQ: 0 ANSI: 5
[ 5.263686] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5.263691] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 5.263724] sd 0:0:0:0: [sda] Write Protect is off
[ 5.263727] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.263737] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.269320] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.269323] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.269521] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.332482] sda: sda1 sda2
[ 5.333235] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.457253] usb 3-1.7: new high-speed USB device number 3 using ehci-pci
[ 5.549500] device-mapper: uevent: version 1.0.3
[ 5.549652] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: [email protected]
[ 5.554331] bio: create slab <bio-1> at 1
[ 5.607167] usb 3-1.8: new high-speed USB device number 4 using ehci-pci
[ 6.510287] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.581705] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 7.582431] systemd[1]: Set hostname to <archins3537>.
[ 8.087615] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 8.087670] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 8.087682] systemd[1]: Starting Login Prompts.
[ 8.087692] systemd[1]: Reached target Login Prompts.
[ 8.087700] systemd[1]: Starting Remote File Systems.
[ 8.087707] systemd[1]: Reached target Remote File Systems.
[ 8.087715] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 8.087736] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 8.087743] systemd[1]: Starting LVM2 metadata daemon socket.
[ 8.087762] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 8.087769] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 8.087789] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 8.087796] systemd[1]: Starting Delayed Shutdown Socket.
[ 8.087813] systemd[1]: Listening on Delayed Shutdown Socket.
[ 8.087822] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 8.087851] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 8.087858] systemd[1]: Starting Paths.
[ 8.087865] systemd[1]: Reached target Paths.
[ 8.087878] systemd[1]: Starting udev Kernel Socket.
[ 8.087895] systemd[1]: Listening on udev Kernel Socket.
[ 8.087904] systemd[1]: Starting udev Control Socket.
[ 8.087920] systemd[1]: Listening on udev Control Socket.
[ 8.087944] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 8.088034] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 8.088043] systemd[1]: Starting Encrypted Volumes.
[ 8.088051] systemd[1]: Reached target Encrypted Volumes.
[ 8.088059] systemd[1]: Starting Journal Socket.
[ 8.088098] systemd[1]: Listening on Journal Socket.
[ 8.094096] systemd[1]: Started Set Up Additional Binary Formats.
[ 8.146808] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 8.147345] systemd[1]: Starting udev Coldplug all Devices...
[ 8.147641] systemd[1]: Starting Setup Virtual Console...
[ 8.156662] systemd[1]: Started Load Kernel Modules.
[ 8.156702] systemd[1]: Mounted FUSE Control File System.
[ 8.156719] systemd[1]: Mounting Debug File System...
[ 8.160118] systemd[1]: Starting Apply Kernel Variables...
[ 8.160456] systemd[1]: Mounting POSIX Message Queue File System...
[ 8.160770] systemd[1]: Mounting Configuration File System...
[ 8.161235] systemd[1]: Starting Journal Service...
[ 8.161549] systemd[1]: Started Journal Service.
[ 8.407759] systemd-journald[153]: Vacuuming done, freed 0 bytes
[ 8.622532] EXT4-fs (dm-1): re-mounted. Opts: data=ordered
[ 8.834003] systemd-udevd[177]: starting version 208
[ 9.449711] ACPI: Requesting acpi_cpufreq
[ 9.652388] snd_hda_intel 0000:00:03.0: irq 63 for MSI/MSI-X
[ 9.652512] snd_hda_intel 0000:00:1b.0: irq 64 for MSI/MSI-X
[ 9.703295] ACPI: AC Adapter [ACAD] (off-line)
[ 9.734702] wmi: Mapper loaded
[ 9.767167] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 9.900528] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x15
[ 9.914682] ACPI: Battery Slot [BAT1] (battery present)
[ 9.946497] hda_codec: invalid CONNECT_LIST verb 5[1]:0
[ 9.946555] hda_codec: invalid CONNECT_LIST verb 6[1]:0
[ 9.946621] hda_codec: invalid CONNECT_LIST verb 7[1]:0
[ 9.948456] input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
[ 9.948585] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
[ 9.948656] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[ 9.953096] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 9.953371] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
[ 9.953378] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.953384] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 1 (20130517/utaddress-251)
[ 9.953388] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPR_ 2 (20130517/utaddress-251)
[ 9.953392] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.953394] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 1 (20130517/utaddress-251)
[ 9.953398] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPR_ 2 (20130517/utaddress-251)
[ 9.953402] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_D 3 (20130517/utaddress-251)
[ 9.953406] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.953407] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 9.953792] mei_me 0000:00:16.0: setting latency timer to 64
[ 9.953838] mei_me 0000:00:16.0: irq 65 for MSI/MSI-X
[ 9.956390] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.956608] ACPI Warning: 0x0000000000005040-0x000000000000505f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130517/utaddress-251)
[ 9.956615] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.231648] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 10.250684] cfg80211: Calling CRDA to update world regulatory domain
[ 10.307646] input: Dell WMI hotkeys as /devices/virtual/input/input11
[ 10.310649] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x15
[ 10.313166] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x15
[ 10.313536] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x15
[ 10.313923] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 10.347294] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 10.347309] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 10.347544] r8169 0000:01:00.0: irq 66 for MSI/MSI-X
[ 10.347727] r8169 0000:01:00.0 eth0: RTL8106e at 0xffffc90022cee000, 74:86:7a:50:ce:f4, XID 04900000 IRQ 66
[ 10.381911] iTCO_vendor_support: vendor-support=0
[ 10.393283] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 10.393324] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 10.393578] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.400848] systemd-udevd[183]: renamed network interface eth0 to enp1s0
[ 10.416483] ath: EEPROM regdomain: 0x60
[ 10.416486] ath: EEPROM indicates we should expect a direct regpair map
[ 10.416489] ath: Country alpha2 being used: 00
[ 10.416490] ath: Regpair used: 0x60
[ 10.614808] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 10.615079] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90035180000, irq=19
[ 10.643067] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[ 10.643619] systemd-udevd[189]: renamed network interface wlan0 to wlp2s0
[ 10.646589] scsi3 : SCSI emulation for RTS5139 USB card reader
[ 10.646742]

Cdh wrote:
You didn't give much information so...
Blacklisting is now done via /etc/modprobe.d/*.conf files
For example:
/etc/modprobe.d/disable-radeon.conf would contain
install radeon /bin/false
You can also write "blacklist radeon" instead but that only prevents loading it automatically on itself while booting. You can still modprobe it and if it is a dependency of an automatically loaded module it will still get loaded. With the install ... /bin/false there is no way to load it.
Also you need to make sure that it is not in the modules array in /etc/mkinitcpio.conf (or that your disable-radeon.conf is in the files array) because the initramfs is its own mini-system that doesn't know about the module configuration otherwise.
but thats the problem ! i need radeon module to start because vgaswitcheroo needs it ! and then trun it off because 'I' dont need it ! anyway i ll give 'bin/false' method a try !

ATI Mobility Radeon HD 5470 Graphics (switchable)

hello
ATI Mobility Radeon HD 5470 512MB, and an integrated ATI Mobility Radeon HD4250
FROM I only see that ATI Mobility Radeon HD4250 has 4200 sees the other has a standard vga.
recovery after restoration, blue screen of death occurs after some time
it works well, if only the hd4250 driver is above the other standard VGA
This question was solved.
View Solution.

Hi
1.pictures
http://kepfeltoltes.hu/view/130402/10335707481_www.kepfeltoltes.hu_.jpg
http://kepfeltoltes.hu/view/130402/4370829842_www.kepfeltoltes.hu_.jpg
If Windows \ system32 \ drivers directory on the file I change atikmdag.sys from the web then there is no blue screen with the resolution 1024 * 768 is not only 1367 *

ATI Mobility Radeon X1600 graphics card Windows 8 driver missing

I just installed Windows 8 Enterprise Trial version on HP nx9420 laptop (2GHz dual core prosessor, 4gb memory, ATI Motility Radeon X1600 graphics card with 256mb own memory, 1680x1050 native display resolution) on second partition, side by side with existing
Windows 7.
Installation succeeded perfect, except Windows 8 couldn't install, nor did find from Windows Update display driver for ATI Mobility Radeon X1600 graphics card. Only Microsoft generic display driver was installed and it offered maximum 1450x800 resolution,
so not laptops native 1680x1050 screen resolution.
Windows 7 can install working ATI driver right from Windows Update for that graphics card (version 8.561.0.0 dated 1.12.2008).
Laptop manufacturer HP has latest, old driver for Vista (version 8.453.0.0 dated 22.1.2008), so I installed that, selecting compatibility mode Vista with setup-program in Windows 8. That installed, but seems to have some problems, telling of missing library,
maybe with some ATI extra diplay manager software and C++ 2005 library, that it installed.
MY QUESTION: Is there some problems with Windows 8 and that ATI Mobility Radeon X1600 graphics card? Why isn't the Windows 7 -version of ATI mobility radeon X1600 display driver available in Windows Update for Windows 8 too?

Thank you all of your thanks.
I can confirm that this solution works with Windows 10 Technology/Insider preview too. And surely works with forthcoming Windows RTM too.
Windows 8.1 and Windows 10 TP work both like a charm with nearly 10 years old HP Compaq nx9420 laptop, with Intel Core 2 Duo and ATI Mobility Radeon X1600 display adapter. Nice co-operation of "old" hardware and very Modern Windows OS.
So in brief:
If you have laptop with ATI Mobility Radeon X1600 or other X1000-series display adapter and
you want to install Windows 8, 8.1 or 10, do this:
0) First just install Windows 8.x/10. It will install Microsoft Generic display driver, but that doesn't support full resolution of ATI Mobility Radeon X1000 -series - for example it may show maximum 1400x1050 -resolution, thus your laptop display and Radeon
X1000 may support native 1650x1050, but you can't obtain that resolution with that Microsoft generic driver. So you need ATI-driver and you can get it this way:
1) With Internet Explorer (this doesn't work with other browsers) go to
Microsoft Update -catalog: http://catalog.update.microsoft.com/
2) Search "ATI Mobility Radeon X1600"
(or X1300, X1800 etc)
3) Sort search results by date (last update -column), latest on top. You will see drivers for Windows 7
- they will work with Windows 8.x and 10 too. There is certainly two of them; other is 32 bit only and other is 64 bit dirver.
4) Select proper driver version of them, according your Windows 32 or 64 bit, so click Add
5) At top-right click Show basket and then download those driver packages to your computer. They are cab-file
-packages.
6) Obtain 7-zip -utility, install it and with it unpack that cab-driver package on folder with its package-name.
7) On start of taskbar, right mouse button click Windows-Start and then select Hardware management. On
Hardware management -window open Display adapter -section, then mouse right click Microsoft adapter and select Update driver. Then on next window, select search driver from computer.
8) Browse on folder, where you unpacked ATI driver (on stage 6 earlier) and select Next ... that updates
driver, on the go and you don't need even to reboot Windows.
9) Now you have proper ATI Mobility Radeon -driver in use. It surely sets automatically resolution
according your laptop screen (so recommended native resolution of screen panel) or you can select that on diplay settings.
Extra: For that Windows 8.x/10 boot works fine too, do this too:
Seems that Windows 8.x (and Windows 10 too), with their hybrid-shutdown -functionality, require some support of the display adapter, that ATI Radeon Mobility x1000 -series don't have.
So the solution is to disable that Windows 8.x (or Windows 10) hybrid boot -functionality (that is quicker boot) and to use "normal boot".
You can fix that this way:
- at end of Taskbar click battery/power icon and select Power settings
- navigate to power and sleep settings
- either at bottom of those settings, or in Win10 more power settings, select power buttons functionality/settings (so what power button, sleep button or closing laptop screen does)
- at bottom of those settings is shutdown options (or with similar name). uncheck "use quick boot" -settings (for to uncheck that you may need to click first upper "changing disabled settings" (or similar name) at top or windows)
(I recommend to check Hibernate at the same time too, because that is usefull)
- then Save settings and reboot Windows and you have got rid of that problem that Windows 8.x/10 don't show Lock screen, now it does.
Boot takes just a little longer, so practically no problem. And if you need quicker boot with laptop, use Hibernate-state, so don't shut down your laptop, but instead put it into Hibernate-state (that is better than Sleep mode, because Hibernate-mode doesn't
consume battery-power, like Sleep-mode does)

W500 with ATI Mobility FireGL V5700 -can't change switchable graphics to "High Performance"

My W500 crashed on me this morning while playing a game, and I ran into a couple blue screens of death.After doing some troubleshooting, I determined that I had an issue with my video card, more specifically that my machine no longer recognizes my ATI Mobility FGL V5700, and only the low quality Intel chipset.
I tried uninstalling and reinstalling the ATI Catalyst drivers, but that did not work.
I also tried changing the switchable graphics back to "High Performance", but when I do, the screen goes completely black. If I put my computer to sleep and then wake it back up, the switchable graphics automatically go back to "Energy Saving", and my display works again, of course with the Intel graphics only.
If reinstalling the drivers doesn't work, and I can't change the graphics back to High Performance mode, does that mean my video card is shot? Any suggestions other than buy a new one or live with the Intel graphics?
I'd try to contact support but unfortunately my warranty just expired a month ago. Seems like everything breaks within a couple months of the warranty expiring. Grrr.

I'm having identical issues. After updating the driver through lenovo update utility, i can no longer get the graphic card driver working. I've tried several different drivers, none of them work, and I'm now stuck here with a useless computer while my deadlines come closer and closer. Are there seriously no offical reply to any of these threads?

Systemd multiseat with NVidia card and Intel integrated graphics

I'm trying to set up multiseat Gnome 3 on a system running the nvidia proprietary drivers. The first seat on the nvidia GPU is working fine. For the second seat I'm trying to use an integrated Intel GPU, but all I get is the GDM "Oh no, something has gone wrong" screen. I'm not sure why, but I suspect it could be because the intel driver is also trying to load nvidia's libglx.so:
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: X.Org X Server 1.16.1
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Release Date: 2014-09-21
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: X Protocol Version 11, Revision 0
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Build Operating System: Linux 3.16.1-1-ARCH x86_64
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Current Operating System: Linux comp1 3.16.4-1-ARCH #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014 x86_64
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=4ed01629-9f62-4642-8815-66a9ef652965 rw quiet
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Build Date: 21 September 2014 10:53:13AM
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Current version of pixman: 0.32.6
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Before reporting problems, check http://wiki.x.org
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: to make sure that you have the latest version.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Markers: (--) probed, (**) from config file, (==) default setting,
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (++) from command line, (!!) notice, (II) informational,
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (++) Log file: "/dev/null", Time: Wed Oct 15 21:47:02 2014
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (++) Using config file: "/run/systemd/multi-session-x/seat1"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) Using config directory: "/etc/X11/xorg.conf.d"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) Using system config directory "/usr/share/X11/xorg.conf.d"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) No Layout section. Using the first Screen section.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) No screen section available. Using defaults.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (**) |-->Screen "Default Screen Section" (0)
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (**) | |-->Monitor "<default monitor>"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) No monitor specified for screen "Default Screen Section".
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Using a default monitor configuration.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (**) Option "DontVTSwitch" "True"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (**) Option "AutoAddDevices" "True"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (**) Automatically adding devices
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) Automatically enabling devices
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) Automatically adding GPU devices
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (WW) The directory "/usr/share/fonts/OTF/" does not exist.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Entry deleted from font path.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Entry deleted from font path.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Entry deleted from font path.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) FontPath set to:
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: /usr/share/fonts/misc/,
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: /usr/share/fonts/TTF/,
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: /usr/share/fonts/Type1/
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) ModulePath set to "/usr/lib/xorg/modules"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) The server relies on udev to provide the list of input devices.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: If no devices become available, reconfigure udev or disable AutoAddDevices.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Loader magic: 0x818d80
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Module ABI versions:
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: X.Org ANSI C Emulation: 0.4
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: X.Org Video Driver: 18.0
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: X.Org XInput driver : 21.0
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: X.Org Server Extension : 8.0
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (EE) systemd-logind: failed to get session: PID 323 does not belong to any known session
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) xfree86: Adding drm device (/dev/dri/card0)
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) LoadModule: "glx"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Module glx: vendor="NVIDIA Corporation"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: compiled for 4.0.2, module version = 1.0.0
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Module class: X.Org Server Extension
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) NVIDIA GLX Module 343.22 Thu Sep 11 15:55:13 PDT 2014
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) Matched intel as autoconfigured driver 0
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) Matched modesetting as autoconfigured driver 1
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) Matched fbdev as autoconfigured driver 2
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) Matched vesa as autoconfigured driver 3
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) Assigned the driver to the xf86ConfigLayout
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) LoadModule: "intel"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Module intel: vendor="X.Org Foundation"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: compiled for 1.16.1, module version = 2.99.916
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Module class: X.Org Video Driver
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: ABI class: X.Org Video Driver, version 18.0
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) LoadModule: "modesetting"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (WW) Warning, couldn't open module modesetting
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) UnloadModule: "modesetting"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Unloading modesetting
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (EE) Failed to load module "modesetting" (module does not exist, 0)
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) LoadModule: "fbdev"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (WW) Warning, couldn't open module fbdev
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) UnloadModule: "fbdev"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Unloading fbdev
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (EE) Failed to load module "fbdev" (module does not exist, 0)
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) LoadModule: "vesa"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Module vesa: vendor="X.Org Foundation"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: compiled for 1.16.0, module version = 2.3.2
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Module class: X.Org Video Driver
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: ABI class: X.Org Video Driver, version 18.0
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) VESA: driver for VESA chipsets: vesa
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (WW) Falling back to old probe method for vesa
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 2000
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Creating default Display subsection in Screen section
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: "Default Screen Section" for depth/fbbpp 24/32
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) intel(0): Depth 24, (--) framebuffer bpp 32
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) intel(0): RGB weight 888
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) intel(0): Default visual is TrueColor
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Output VGA1 has no monitor section
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Enabled output VGA1
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Output HDMI1 has no monitor section
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Enabled output HDMI1
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Output DP1 has no monitor section
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Enabled output DP1
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Output HDMI2 has no monitor section
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Enabled output HDMI2
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Output HDMI3 has no monitor section
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Enabled output HDMI3
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Output DP2 has no monitor section
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Enabled output DP2
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Output DP3 has no monitor section
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Enabled output DP3
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (--) intel(0): Using a maximum size of 256x256 for hardware cursors
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Output VIRTUAL1 has no monitor section
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Enabled output VIRTUAL1
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (--) intel(0): Output HDMI1 using initial mode 1280x1024 on pipe 0
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) intel(0): TearFree disabled
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) intel(0): DPI set to (96, 96)
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Loading sub module "dri2"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) LoadModule: "dri2"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Module "dri2" already built-in
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Loading sub module "present"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) LoadModule: "present"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Module "present" already built-in
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) UnloadModule: "vesa"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Unloading vesa
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) Depth 24 pixmap format is 32 bpp
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): SNA initialized with Sandybridge (gen6, gt1) backend
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) intel(0): Backing store enabled
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) intel(0): Silken mouse enabled
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): HW Cursor enabled
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) intel(0): DPMS enabled
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): [DRI2] Setup complete
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): [DRI2] DRI driver: i965
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): [DRI2] VDPAU driver: i965
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): direct rendering: DRI2 enabled
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): hardware support for Present enabled
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) intel(0): display hotplug detection enabled
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (--) RandR disabled
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): switch to mode [email protected] on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection none
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Setting screen physical size to 338 x 270
Unfortunately the config file for the second X server is /run/systemd/multi-session-x/seat1, which is not persistent. Is there any other way to get a different config file to the second X server, so I can force it to load the default libglx.so?
For completeness, output of seat-status is as follows:
seat1
Sessions: *c1
Devices:
├─/sys/devices/pci0000:00/0000:00:02.0/drm/card0
│ drm:card0
└─/sys/devices/pci0000:00/0000:00:02.0/graphics/fb1
[MASTER] graphics:fb1 "inteldrmfb"

One thing you can do to ensure highest perfomance on games is go to the Nvidia Control Panel, Manage 3D Settings, Programs, then find the game you want and set it to use only NVIDIA High Performance (or Discrete) graphics. You can't use both cards at the same time as of writing this (DirectX 11), but with the arrival of Windows 10 and DirectX 12 on July 29 you will be able to use both at once to increase performance. Until then, though, it is simply not possible to use both at once. The best option is to just use the GTX 860M.

How to get "ATI Mobility FIREGL V5250 graphics adapter" on T60p to support plug-n-play monitor

My T60p 8742 with ATI Mobility FIREGL V5250 graphics only recognizes a "plug and play monitor" (a Sceptre X240BC-FHD tv) as a "default monitor" and can't get the monitor to display in its target resolution, 1920x1080, using VGA.
Setting it to 1920x1080 in Display Properties yields 1280x720 which extends beyond the montor's frame.
I want to use it as a second monitor along with my T60p's 1680x1050 screen. (OS is XPsp3)
Will updating the the video driver
> from "8.442.3-080103a1-057754C (Build ID: 79D172WW)"
> to "8.593.100.7-090929a"
(per http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-62841) get me plug-n-play support?
If not, any way to make it work?
Thanks very much.

The problem has been corrected(!!!!), so I'll mark this issue as solved. I now have an inoperative Catalyst Control Center (CCC), but I feel that is a comparatively minor issue that I can deal with later.
There were several learnings along the way to share with anyone who may be interested:
- Based on this experience, I would regard v8.442 FireGL video driver as less stable than Version 8.383.1.1.3 (for XP) in dual monitor mode, and would not recommend its use. If you do upgrade to it, be prepared to rollback.
- Old drivers can be found on www.opendrivers.com, but are also available via ftp from IBM's web site. I found this quite by accident. The v8.383.1.1.3 driver is at ftp://ftp.software.ibm.com/pc/pccbbs/mobiles/79d165ww.exe.
- If, like me, you can't use rollback and have to install an older driver over a new one, be aware that the older version of CCC will fail to install. You must uninstall the newer version first. Otherwise, you'll be left with a version of CCC that (apparently) fails to run.
Thanks for your help, JanJL!

Repeated error from Intel integrated Graphics card in my brand-new B320

Hi
I am getting repeated errors from the Intel Integrated Graphics card (on the Intel i3 chip as I understand it) in my brand-new B320.
I checked via a tool from Intel that my drivers were up-to-date (version 15.22.1.2361).
I checked via Device Manager Update Drivers that my driver was up-to-date.
I attempted to uninstall and re-install my driver BUT the uninstall reverted me to a VGA Adapter (so my screen was then running in a low res 800x600 mode!) and I could not even then see the Intel Integrated Graphics card in Device Manager to be able to re-install the driver against (even if I ran scan for new hardware): I had to restore to a System Restore Point - so the problem has of course come back.
I have even had one error where the screen then went completely blank and nothing would bring it back: I had to power off the PC (Ouch!)
PLEASE advise how I rectify this incredibly frustrating problem step-by-step.

hey johnestlea,
i was going through the download list of the B320 here : http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers_list.aspx?CategoryID=156819
And could not find any driver with the version 15.22.1.2361 for the Intel Integrated Graphic Card. Where did you get that version ?
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Hp dv6 3050ee AMD mobility radeon hd 5000 (5650) series and intel(r) HD Graphics draver

У меня - HP dv6 3050ee, видео - Mobility Radeon AMD HD 5000 (5650) серии и Intel (R) HD Graphics Draver, пытаюсь установить драйвера для Windows 8.1 (! Их нету)
Но как только автоматически устанавливаются драйвера, начинает перегружаться компьютер! Сейчас я работаю с отключенными видеокартами, в другом случаи начинается перезагрузка компьютера, подскажите что можно сдлеать? Сейчас у меня полностью отключена и удалена - AMD Mobility Radeon HD 5000 (5650) серии, а Intel (R) HD Graphics Draver - работает без драйверов ((( .
Большое спасибо за помощь.
I - HP dv6 3050ee, video - Mobility Radeon AMD HD 5000 (5650) series and Intel (R) HD Graphics Draver, try to install the drivers for Windows 8.1 (! They do not have )
But as soon as the drivers are automatically installed , the computer begins to reboot ! I am currently working with disabled graphics cards , in other cases begins to restart your computer , you can tell me what sdleat ? Now I have completely disabled and removed - AMD Mobility Radeon HD 5000 (5650) series and Intel (R) HD Graphics Draver - works without drivers (((.
Thanks a lot for the help.

Hi @Jiko ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-3050ee Notebook and issue with Graphic drivers for Windows 8.1. You system shows me that the drivers are only available for Windows 7 on this machine. Updating to Windows 8.1 would rely on Windows 8 drivers only and you would lose some of the enhanced effects on this Notebook.
No, you can not use the Notebook without drivers installed.
Have you tried to just update the drivers in the Device manager on Windows 8.1?
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Integrated Intel Iris Pro graphics adapter in boot camp

Hello
How can I use integrated Intel Iris Pro graphics adapter in boot camp on my new Haswell Macbook pro?
It is really important in order to get decent battery time.
Best regards
Jesper

For some odd reason Apple has restricted Mac computer from using that graphics adapter when you are using Windows and your Mac has a add-on, discrete, graphics card installed.
If you do a google search on it no one has been able to make it work on a Mac.

ATI Mobility Radeon Premium Graphics DirectX 11

Please give a link for DirectX 11 download.

Dear sir,
        Below mention system I Purchased from Doha -QATAR
I Need
ATI Mobility Radeon Premium Graphics DirectX11
                                           For
                  Model No      :- HP Pavilion dv3 4303se
                  Serial No.     :- [edited by Moderator]
                  Product No. :- LE428EA#ABV
   Reply as soon as possible
Thank you

Will the ATI Mobility Radeon HD 3400 Series Graphics card be capable of outputting at 2560x1440?

I currently have a dell studio 15 laptop with an ATI Mobility Radeon HD 3400 graphics card, i'm planning to upgrade to an iMac with the same 27 inch display as the one in this forum but i was hoping to continue to use this computer and use the iMacs great display as an external monitor whenever i want to use windows, i was wondering if my graphics card supports such a high resolution or not?
Thanks

Since I'm running Windows 7 Enterprise, I cannot use Windows Update as it is controlled by WSUS. Anyway, after hours of discussing with the IT experts at my workplace, none of them could solve the problem. They even said I can never run my video card again as it is not compatible with Windows 7.
But I didn't give up.
After hours of figuring out a solution, I decided to download and try out the "ThinkPad Switchable Graphics Driver for Windows 7 - ThinkPad R400, T400, T500, W500" and guessed what? It worked! The Catalyst center was also installed. Who knew it was the Switchable Graphics Driver when the ATI card was the only one shown in Device Manager to be not working.
Here's the link:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73641
I hope this works for all of you who had the same problems as me. Cheers!

ATI Mobility Radeon HD 6370 switchable graphics driver

Is there any way to get a new driver for the ATI Mobility Radeon HD 6370 switchable graphics card? I have a HP Pavilion dv7-4276nr Entertainment Notebook PC and the latest driver I can download from HP are from 2010!! Lots of games are not running properly because of the lack of updated drivers and I cannot download them from de ATI page since they wont work. Please tell me if there is any other place from where I can download a more updated driver. Thanks in advance.

@stormsfury
I understand that you are looking for help with disabling the more powerful GPU on your notebook.
I did some searching and found a few posts on this matter, by a few of the HP forum experts. Check through these pages:
how to disable switchable graphics
Disabling switchable graphics or setting global default.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Ati Mobility HD 5470/Intel integrated hybrid graphics

Similar Messages

Maybe you are looking for