ATP check not working

Hi APO Gurus
I have a problem here. When I am trying to create a sales order and try for ATP check, ATP check is not happening. I have checked the allocations also. Allocations are plenty in the planning book for the selected delivary week (material and sold to party combination).
I am getting a message "Product of item 000010 not allocated". And also I have checked for other materials, ATP check is happening. For few materials ATP is possible and for few ATP check is not possible with the mentioned message.
Request you to provide your inputs to solve the problem.
Regards,
Raghava

Hi DB49,
Appreciate your reply for the post. But I have checked ur both suggestions, there are allocations still leftover for the material + customer combination in the allocations planning book. And also the allocation procedure is maintained in product master /N/SAPAPO/MAT1. The ATP check is working for few materials and not working for few materials. So I have compared the master data of the both kinds of materials.
Still the problem persisits. After some amount of research I felt there must be some problem with the triggering of Function Modules related to the ATP check. Can this be a problem.
Request to provide your suggestions.
Regards,
Raghava

Similar Messages

  • ATP check not working properly for batches

    Dear PP gurus,
    I have a problem with ATP check for materials. When i see in MMBE for a material which has 3 batches it shows a problem: The batch a has a quantity 10 but it shows the reserved quantity against this batch as 12. Same is for batch B,ATP check not giving correct results. Please tell me how to correct it.
    Some one told me to implement OSS note 1237093 to correct the standard program error introduced with Note 330828.
    Please advise how to proceed.

    Please answer to the above question..

  • CRM ATP check not working ETC erro

    Hello,
    When I create a sales order with ATP check I get an error in the log saying BTE 1000820 and BTE 1000821 are not active.
    I created the CRMATP flag in R/3, and ATP is working in R/3 (without APO).

    Hi,
    Check OSS Note Note 620217
    This is because of missing customizing.
    Use Transaction FIBF in the R/3 system to maintain the following entries under 'Settings -> Process function modules -> ... of an SAP appl.' Prozess  Ctr  Application   Function module
    01000820      CRMATP        PERS_ENQ_ATP_ENTRIES_SELECT
    01000821      CRMATP        PERS_ENQ_ATP_ENTRIES_INSERT
    Thank You,
    Vimal

  • SD- Sales Order - ATP check not working for few item in same sales order

    Hi Experts,
    Need help we activated ATP check but for few item i could not find confirmation qty after availability check. In same SO out of 4 items for schedule line it confirming qty for 2 item but  it's not confirming for remaining 2 items though stock is available. Please guide me how to correst and what need to check.
    Manoj

    Dear Manoj,
               As you know, ATP is a big subject & some times its difficult to point the exact problem.
    In your case, I suggest you to execute the function module:BAPI_MATERIAL_AVAILABILITY using Tx:SE37
    key in selection criteria , in results check the "ATPQTY"- it will show you how much actual stock is available for use i.e. ATP qtty.
    still if you find the availability & system not confirming the qtty, then problem could be in checking rule
    Tx:OVZ9 check in relevant combination, whether you are considering RLT or not?
    is this case with MTS or MTO
    because in Sales order -
    for MTS - checking rule "A" & MTO checking rule will be "AE"
    Regards,
    Reazuddin MD

  • Rule based ATP is not working for Components

    Hi All,
    Our requirement is to do availability check through APO for Sales order created in ECC,so we are using gATP.
    Requirement: We are creating salesorder for BOM header (Sales BOM) and avaialbility check should happen for components i.e. Product avalaibility & Rule based substitution.
    Issue: Product availiabilty is working for components but rules based substituion is working,  mean Rules are not getting determind for components.
    Settings:
    - Header doesnot exist in APO and compnents do exist in APO
    - Availability check is not enabled for header item category and enabled for Item category for components
    - Rules have been created for Components in APO
    - Rule base ATP is activated in Check instructions
    We have also tried MATP for this i.e. PPM created in APO but still didn't get the desired result.
    If we create salesorder for the component material directly then Rule based ATP is happening, so for components Rule based ATP is not working.
    How do we enable enable Rulesbased ATP for components, i mean is there any different way to do the same.
    Thanks for help.
    Regards,
    Jagadeesh

    Hi Jagdeesh,
    If you are creating BOM in ECC and CIFing PPM of FG/Header material to APO, I think you need to CIF Header material, too, with material integration model.
    Please include header material in you integration models for material, SO and ATP check as well.
    For component availability check, you can use MATP; but for MATP, FG should be in APO. You need not to CIF any receipts of FG (stock, planned orders, POs etc), so that MATP will be triggered directly. Then maintaining Rules for RMs will enable to select available RMs according to the rule created.
    Regards,
    Bipin

  • Actionscript error checking not working?

    Does error checking only work on actionscript files that are imported by main file?
    Also...will error checking not work on the current open file if another file contains errors?

    from where u are loading the external SWF
    possible problems are
    check the URL
    check for crossDomain problem

  • ATP Check not workin properly for Batches in MMBE

    Dear PP gurus,
    I have a problem with ATP check for materials. When i see in MMBE for a material which has 3 batches it shows a problem: The batch a has a quantity 10 but it shows the reserved quantity against this batch as 12. Same is for batch B,ATP check not giving correct results. Please tell me how to correct it.
    Some one told me to implement OSS note 1237093 to correct the standard program error introduced with Note 330828.
    Please advise how to proceed.

    Hi,
    Reservation is a kind of requirement. The situation that you describe, that you have in batch A 10 in stock and the reserved quantity is 12 can happen if, for example, you created a production order where this batch is a component, the batch was determined in the order, and either you didn't do an ATP check at batch level, or you issued stock from this batch at a later point in time (without poper ATP).
    MMBE is just a report, it is not doing ATP.
    I suggest that you review your ATP definitions and processes to find out where the problem is.
    Regards,
    Mario

  • Spell Check Not working in Office 2013

    I can not get spell check to work at all in Outlook nor Word documents.  I need real basic instructions please.
     I tried this idea from a prior post, but there is no dictionary file to pick.  Any other ideas?
    If so, back up all these files. Add the custom dictionaries via:
    Click the
    File tab.
    Click
    Options.
    Click
    Proofing.
    Make sure the
    Suggest from main dictionary only check box is cleared.
    Click
    Custom Dictionaries.
    Click
    Add.
    Locate the folder containing the custom dictionary you want, and then double-click the dictionary file.

     I tried this idea from a prior post, but there is no dictionary file to pick.
    Are there any dictionaries listed in the Dictionary List when you click
    File > Options > Proofing > Custom Dictionaries? If so, please make sure the check boxes before these dictionaries are ticked.
    Do you mean the Spell Check not working as you type or after you click the
    Spelling & Grammar button?
    If you mean spell check not working as you type, please go to File > Options > Proofing and select the check box before "Check spelling as you type".
    If above didn't apply, please try to rename your Word template file (Normal.dotm) to Normal.old and then restart Word to check if it helps.
    In addition, we can also try to run a repair of your Office installation to check the result. See:
    http://office.microsoft.com/en-in/excel-help/repair-office-programs-HA010357402.aspx
    For more troubleshooting steps regarding spell check not working, please refer:
    http://www.timeatlas.com/5_minute_tips/annoyances/word_spell_check_woes#.U2ctxf6KAic
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
    does not guarantee the accuracy of this information.
    Regards,
    Steve Fan
    TechNet Community Support

  • CRM Availability Check not working for certain Item Category

    Hi there,
    I have a situation where for certain order type/item category combinations, the availability check on the same material is not working.
    The check is set up to happen in SAP ECC.
    I have checked the config. under SPRO->CRM->Basic Functions->Availability Check->Availability Check using SAP ECC
    as per many SDN posts on this, and everything looks fine.
    The new item category, which was a copy of an existing one, works (i.e. gives availability) for certain order types, but not others.
    If I create the same order directly in ECC, it works correctly every time.
    I searched the code (from consultants who set it up originally) and can see nothing specific to the order type/ item category.
    I also put a breakpoint on AVAILABILTY_CHECK function module in SAP ECC - it is not being hit, in the case where check is not successful.
    Breakpoints in MV45AFZZ (Sales Order userexit) also not being hit, but they are hit for the Order/item category combination when it works successfully.
    Any suggestions on where else this could be configured would be appreciated!
    thanks,
    David

    Hi David,
    One 'simple' reason for this could be that the copied item category does not have the
    ATP Profile set up in the item category in the IMG. Make sure you have an ATP profile assigned in the area 'ATP Profile' in the item category.
    Please see as well the SCN Wiki link:
    Availability Check CRM-BTX-BF-ATP - CRM - SCN Wiki
    Best regards
    Christophe

  • Pages 08 spell checker not working after pasting in a windows document.

    I am working Pages 08. I pasted a Windows document ( Microsoft word I am assuming ? ) that I saved from another email account(not safari,school based) into my Pages document. Now the spell checker will not work in the Pages document only, Works fine everywhere else. Even if I paste the Pages text into a new document the checker will not work in the document. Any suggestions /

    I figured it out. The language was set to none in the inspector

  • Why is my spell checker not working in a document using Word 2003

    I have a word document in Word 2003  .   I was altering it and noticed that from page 3 to 6 the spell checker does not work.
    I transferred the pages into another another file still didn't work .  Just copied a paragraph still didn't work.  So I then started typing the rest of the document into another file and straight away it underlined my spelling mistakes in red.
    So why not in these few pages of my document.
    This is a paragraph from the pages below.  I altered some words deliberately to see if my Word 2003 would pick them up.  It didn't. 
    The landlord shall be entitiled to pursue the tenant for any reasonable costs incurred as a result of the tenant’s faulure to pay rent including but not limited to any charges for returned cheques or any reasonable costs incurred
    in pursuing the tenant for payment of unpaid rent.
    But when I put it in here it does pick them up.  So it is something I have done .

    Hi,
    According to your description, this issue is more related to Word. The Word IT Pro Discussions forum is a better place for word questions, we will move it there for you.
    Regards
    Starain
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • ATP FUNCTIONALITY NOT WORKING CORRECTLY FOR ATO Model

    Guru's,
    Currently I am facing issue in ATP Inquiry to arrive at schedule ship date, we have set up an ATO Model and its low-level parts for multi level ATP, including ATP rules, item attributes, bom attributes, and lead times and ATP check is based on planned output and enabled 24X7 plan.
    When try to perform ATP inquiry either from ASCP/OM responsibility, Instead of showing complete drill down of material constraint at the part level, it "stops" at the model level and shows no availability until the inifinte supply timefence, then unlimited availability after that.
    I was earlier able to view the complete ATP pegging details with ATP dates well within ITF, but however when we re run the plan to include additional SO the above behavior is observed.
    Can some one help me to reslove the issue, as I am not sure what exactly which is triggering this behavior.
    Thanks,

    Thanks for the reply, but this note was not addressing the above stated issue. In this note for matched configuration, they are not able to view pegging else they are able to perform multilevel atp check.
    Can anyone help me to reslove this issue.
    Thanks
    Edited by: user604737 on Jun 18, 2011 4:48 AM
    Edited by: user604737 on Jun 19, 2011 11:50 PM

  • InDesign CC - Spell check not working.

    I can purposefully type a misspelled word in InDesign and the Spell Check doesn't catch it. In fact it doesn't seem to work at all.

    Hi
    Could you please provide the following information which could help in reproducing the issue at my end.
    - Please provide screen shot of the dictionary preferences from following location.
       Mac : Indesign->Preferences->Dictionary
       Win : Edit->Preferences->Dictionary
    - Please confirm whether this issue is also happening with new documents? Can you attach an .indd document with some misspelled words which ID spell check is not able to find. 
    - Do you have previous version of InDesign installed on your machine ? IF yes, can you tell me which all older version of InDesign are installed on your machine ?
    - Please confirm whether Spell check was working fine for you in previous version i.e. in Version 9.1 and issue started when you updated to latest version i.e. ID 9.2.
    I really appreciate your cooperation on this.
    Thanks & Regards
    Dinesh Kukreja

  • DB CHECK not working in db13 - MSSQL 2005

    Hi,
    I'm trying to schedule DBCHECK in DB13 but does not work and shows the following message:
    SQL Job information   ******************************
    Jobname:    SAP CCMS Check Database PRD [20111219134158-1-134158]
    No Corresponding Job history. Either the job is currently
    running or job didn't run
    SQL Job Information   ************************
    Any clue?
    Do I have to schedule this job via MSSQL Management Studio? I know how to create a job but not this one.
    Regards.

    Hi ,
    For scheduling db check using db13
    You use the DBA Planning calendar to schedule the database consistency check on SAP database. A database consistency check performs a thorough check of the entire database. It examines all tables in the database to find out whether index and data pages are correctly linked and indexes are sorted in ported order.
    This feature is only available if the user has sysadmin privileges or has impersonate permission as dbo.
    Procedure
           1.      Schedule the database consistency check in the DBA Planning Calendar.
           2.      In the Action column, select Check Database Consistency.
    There are no parameters to select for this action.
    You can also set this action as a recurring job with the recurrence tab strip.
           3.      When the check has completed, check if it has finished successfully in the DBA Planning Calendar. If it is highlighted in red, there are inconsistencies or errors were generated during the check. For more information about the errors, double-click the task.
    The program log contains additional information about the task.
    ·         Error messages for the DBCC check are also written to the file
    Program Files Microsoft SQL ServerCCMS_CHECKDB_HIST_xxxx.TXT (where xxxx stands for the current year).
    If errors occurred, check this file since it contains all messages generated and is easier to read than the list of errors in the DBA Planning Calendar.
    The user (job owner) with sysadmin privileges can write the ouput of the DBCC Check to the CCMS_CHECKDB_HIST_xxxx.TXTin the file system.
    For DBCCCheckdb jobs scheduled in local systems, the following applies: if the user has only impersonate permissions for remote systems and if there are errors in the DBCC Check output, only some of the errors are written to the job log. In this case, the status of the job is set to failure. If the job is not successful and the DBCC Check output is not written to the CCMS_CHECKDB_HIST file, you must run the DBCC Checkdb command in the SQL Server Management Studio Query Window to obtain the complete output of the DBCC Checkdb statement. For more information about the command, see SAP note 142731.
    ●    Some error information is also recorded in the Windows Error Log. To locate the information in the log, look for SQL Server and SQL Executive entries made at the time the task ran.
    For deleting the jobs from planning calender
    =================================
    Procedure
           1.      Call the DBA Cockpit and choose Jobs ® DBA Planning Calendar in the navigation frame of the DBA Cockpit.
           2.      Double-click a calendar cell or position the cursor on a calendar cell and choose Delete.
    A dialog box appears with a list of all actions to be deleted. You can delete only a single occurrence of a recurring action or all occurrences.
           3.      To delete an action, choose Delete.
    Hope this is useful.
    Regards,
    Deepak Kori

  • Office 2010 spell check not working

    Hi,
    I cant get my spell check to work or underline any incorrect words. I have tried reinstalling word, deleting normal.dotm also the suggestions here
    http://social.technet.microsoft.com/Forums/en-US/office2010/thread/eb94c560-9bc3-4b51-a2dc-bee5cef46bb0 and here
    http://support.microsoft.com/kb/970826 and still no joy.
    If I email a doc to somebody else their spell checker will also not pick up and wrong spellings in my doc
    Any ideas?
    Celtic

    Hi,
    Thank you for using
    Microsoft Office for IT Professionals Forums.
    From your description, please try the following methods:
    1.        
    Open the problem document.
    2.        
    Press the
    Ctrl+A keys to select the entire text.
    3.        
    From the
    Review tab, select Language then Set Proofing Language…
    4.        
    In the
    Language dialog make sure the correct language is selected.
    5.        
    Verify the checkbox
    Do not check spelling or grammar is unchecked.
    6.        
    Click
    OK.
    7.        
    Click the
    File tab.
    8.        
    Under
    Help, click Options.
    9.        
    Under
    Correcting spelling and grammar in Word, click Recheck Document.
    10.    
    To recheck the spelling and grammar, click
    Yes when you see the following message: This operation resets the spelling checker and the grammar checker so that Word will recheck words and grammar you previously checked and chose to ignore. Do you want to continue?
    11.    
    In the
    Word Options dialog box, click OK to get back to the document.
    12.    
    On the
    Review tab, in the Proofing group, click
    Spelling & Grammar.
    Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
    I can do for you, please feel free to let me know.
    Sincerely
    Rex Zhang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Maybe you are looking for