ATT Centro does not appear as modem

I have been on the phone with ATT helpdesk for about an hour and we have set up the partnership between my IBM thinkpad using Windows XP pro laptop and my Palm Centro using a bluetooth dongel but it does not show up as a modem.
I need help quickly.
Post relates to: Centro (AT&T)

Cingular (now AT&T) used to have a downloadable program called "Cingular Communications Manager" that I used many years ago with a Razr and other phones.
Did they mention anything similar to you?
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

IPhone Does Not Appear in iTunes

Hi! My iPhone 3GS does not appear in iTunes. It is recognised by Windows. It is recognised by iTunes in my desktop PC, but the problem is when I use my Samsung NC10 portable notebook.
I am using Windows XP Home, version 2002, with SP3.
iTunes is version 9.2.0.61
So far I have followed suggestions in:
http://support.apple.com/kb/TS1495
including re-installing iTunes, resetting iPhone, checking that required services are running, stopping & starting services. I have used msconfig to see if I couls identify any conflicts but no success.
I used iTunes diagnostics, and it answered "no iPhone, iPad, iPod found"
I DO get an error when I start iTunes:
"The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please re-install iTunes" However, the Samsung NC10 does not have a CD/DVD drive, so I am assuming this is the cause of this error.
The iTunes diagnostic outut is as follows:
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
SAMSUNG ELECTRONICS CO., LTD. NC10
iTunes 9.2.0.61
QuickTime 7.6.6
FairPlay 1.8.20
Apple Application Support 1.3
iPod Updater Library 9.2d4
CD Driver 2.1.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.1.0.62
Apple Mobile Device Driver not found.
Bonjour 2.0.2.0 (214.3)
iTunes Serial Number 826FB*285
Current user is an administrator.
The current local date and time is 2010-06-24 13:20:46.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Video Display Information
Mobile Intel(R) 945 Express Chipset Family
Mobile Intel(R) 945 Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {3611518A-4590-4E1E-AE70-A94755E86674}
Description: Atheros AR5007EG Wireless Network Adapter - Packet Scheduler Miniport
IP Address: 192.168.0.108
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
DHCP Enabled: Yes
DHCP Server: 192.168.0.1
Lease Obtained: Thu Jun 24 09:39:01 2010
Lease Expires: Thu Jul 01 09:39:01 2010
DNS Servers: 192.168.0.1
192.168.0.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple website was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2010-06-23 15:17:47.
** Device Connectivity Tests **
iPodService 9.2.0.61 is currently running.
iTunesHelper 9.2.0.61 is currently running.
Apple Mobile Device service 3.1.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
5th Generation iPod (iPod with video) running firmware version 1.3
Serial Number: 9C643*V9M
<Edited by Host>

I have a netbook toshiba a ipad and a iphone 3gs. And sudanly aparantly without reason, they stopped appearing in itunes. I tried everything in the manuals and nothing. THEN by chance I notice that a have a sdcard adapter inserted BUT without the micro SD inside it. I removed the sd adapter and , miracle when I conected the iphone, IT works allright.
I hope IT works for you guys

TS2529 The SIM card inserted in this iPhone does not appear to be supported. The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation ser

The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information
what can in do?

Well unfortunatly that advice does not always work. I bought a unlocked iphone4 from apple several years ago and went to att on a no contract basis. Six months later the phone crashed while updating the operating system. Apple replaced the phone with a new one. All is fine till I got a iphone5 and gave te phone to my cousin. The phone is now locked to att but att says the IMEI number is not a valid ATT IMEI and therfore cant unlock it. Apple says there is nothing They can or are willing to do so now I am stuck for a 600.00 phone that can't be used.
If anyoun knows a way naround this situation mI would appreciate a heads up.

Steady green light on A1084. Airport Utility 5.6 says set up is complete. Airport Express base station does not appear in the menu bar, so I cannot select it. Is there a fix?

Steady green light on A1084. Mac OS X 10.7.5. IMac. Verizon DSL Actiontec GT704-WGB modem. Airport Utility 5.6 says set up is complete. Airport Express base station does not appear in the menu bar, so I cannot select it and send a signal to airport express to play airtunes through my stereo amplifier. Is there a fix?

I plugged a model A1034 Airport Extreme Base Station into the Verizon DSL Actiontec GT704-WGB modem with an ethernet cable and now the AirPlay icon appears in the Itunes window immediately to the right of the volume control and I can select it and play Airtunes wirelessly through the A1038 Airport Express Base Station in another room connected to a stereo amplifier by a Monster mini-to-RCA left/right audio cable running from the output jack on the A1034 Airport Express Base Station into the CD jacks on the amp. The problem is that I have to select the Apple Network Airport Express Base Station as my network in order to select the Airport Express Base Station when I click the AirPlay icon, which means I have no Internet signal to the Imac. If I select the Airport Extreme Base Station or the Verzion modem as my network, then I have an Internet signal to the Imac, but the Airport Express Base Station is grayed out when I click on the AirPlay icon, so I cannot select the Airport Express Base Station and send tunes to the Airport Express. It would be nice to play Airtunes while simultaneously accessing the Internet. I don't understand your question about what program I am using for which I require AirPlay. I am not learned about computers in general, and even less so about Macs than PCs. I thought the program I was running was Itunes, and there was no separate program to run to use AirPlay for the purpose of sending a signal from the Itunes on the Imac to the A1084 Airport Express base station in a another room, and then out as described above to the stereo amplifier to listen to Itunes music remotely in the other room, without any kind of cable, wire, etc., connecting the Imac to the stereo amplifier. I would guess that the most common use for the A1084 is to play Itunes through a stereo in another room without the need to run wires from the computer to the stereo. I realize it would be easy simply to run a very long mini-to-RCA left/right audio cable across the floor connecting the Imac to the amp without the need to use AirTunes, Airplay or any kind of AirPort, but it would be both unsightly and a tripping hazard.

Cannot forward email message. Contact list does not appear to select. Can reply to sender only

When trying to forward an email message, the contact list does not appear. It can
only be forwarded by entering addresses manually. I can return an email by replying
but I cannot forward under the Mozilla Fox server.
When I am in Internet Explorer I can utilize the email forward without a problem.
Contacted AT & T to see if it was their problem, since I use att.net.
The technician stated it was a problem with Mozilla because it was not compatible
with the AT & T net work. It could possibly be in recent updates, since I just
discovered the problem within the last week.
Would prefer to enter my email through Mozilla Fox. So can you solve this problem
for me.

Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

AppleTV does not appear on iTunes list - upload problems

I am having a problem with my AppleTV appearing in devices on iTunes.
I am using the newest Airport(N) and an Apple TV in the bedroom.
All software is up to date.
Good signal on MacBook Pro when in bedroom so I know I have a good signal from Airport to AppleTV
Problem:
When I open iTunes the ATV does not show up.
I download a TV show.
It appears on my library list as completed.
But, it does not access and upload to the ATV.
I turn APBase off, wait 20 seconds and when turned back on it still does not appear.
I go to Airport Utilities and go through setup. No luck.
Restart Macbook system. No luck.
_The only way I can get it to appear and upload_ is to unplug the ATV and let it restart.
Then I get the upload.
This is not fun. It should be automatic.
Harold

I fix my problem. The port UDP 5353 was not open correctly in the firewall modem.

Time capsule does not appear in the finder.

My time capsule appears in airport utility. It is ready to go. I have it on ethernet because airport isn't a very powerful wireless router. The time capsule does not appear in the finder. It does not appear in the disc utility. It does not appear in time machine. The airport utility will do factory resets, get it ready for internet, whatever. The rest of my net work can not see it.
I have done the finder preferences. I have restarted the computer, jiggered the sharing preferences, done factory resets, tried to find sparce bundles and sparse bundles, reset the finder, force quit finder, tried to find finder plsts, trawled the discussion pages, tried to find server addresses and apple ids. Nothing seems to work.
Time capsule never seems to work as smoothly as it supposed to. I shudder to present my problems to apple support because I know that its a long road and will probably end in tears. But here I am, naked before this disappointing edifice.
Does anyone have any ideas?

What is the make and model number of your modem?
I have a microwave modem on my roof. I don't think that has anything to do with this. I am not using my airport for a wireless router, only as a time capsule connected by ethernet. The Airport Utility calls my airport : Airport Extreme 802.11 ( 1st Generation )
Is the Time Capsule acting as your main router or is another device handling those services?
No, I have a lyncsis router. The wireless router function on airports doesn't seem to work very well. I don't think thats a problem with mine. My brothers have gone with lyncsis as well.
Was the Time Capsule visible in the Finder before, and is now "lost", or has it never appeared in the Finder?
It appeared on my previous laptop. That died. Now I have an imac. The airport has never appeared on the imac.
Thanks for trying to help so quickly
JOhn

√using successfully airport express for internet/ when hooking up new airport extreme light glows green, but does NOT appear in devices seen????airport wifi devices

using sucessfully airport express for internet
when hooking up new airport extreme light glows green, but does NOT appear in devices sesn in 5.6 airport wifi devices
wanting to use extreme at base and express in another part of the house

How is the express getting internet? What modem is it plugged into?
How is the extreme setup? New extreme cannot be setup with 5.6 utility.. you must use latest 6.3. Which also means you cannot setup from computer using less than Lion .. or you must use iOS with latest utility but it has limited configuration cf the computer version.
IPv6 is also needed.. turn on local link.

SIM card inserted in the phone does not appear to be supported?

I have an Iphone 4 and I got the email form ATT telling me I could unlock it, after I sent them a request. I did all the steps and the "Congratulations, your Iphone is unlocked" message did not show up in Itunes. Instead, it went to the "The SIM card inserted in the phone does not appear to be supported. Only compatible SIM cards from a supported Carrier may be used to activate Iphone." I have a Tmobile SIM card that I want to activate my phone under, but as of right now, I don't think my Iphone 4 is unlocked.
I tried the Apple support guide to this message, but there isn't a restore button for this. What should I do?!

Contact AT&T.

HT4061 "The SIM card inserted in this iPhone does not appear to be supported." problem

Hi,
I have an iPhone 4S that I bought and used in the US from ATT carrier. After I moved to India, I had requested ATT for the unlock which is approved. But the following message is displayed while trying to restore the same iPhone in India using another SIM card:
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
Can anyone suggest what should be done to resolve this issue?
Thanks,
Sri.

This is the e-mail I received from AT&T on Nov 5th:
Thank you for contacting AT&T Customer Care about unlocking your AT&T Mobile device.
We have reviewed your request and confirmed that the device may be unlocked.
Please allow 24 hours upon receipt of this notification to complete the unlock process.
To complete the unlock, simply
1. Open iTunes on your Mac or PC and verify that you have Internet connectivity.
2. Ensure a SIM card is inserted into your iPhone.
3. Connect your iPhone using the dock connector to USB cable that came with your iPhone.
4. Backup and restore your iPhone using iTunes. For information on backup and restore, please visit http://support.apple.com/kb/HT1414.
5. After restoring, your iPhone will be unlocked.
Additional information on unlocking can be found at http://support.apple.com/kb/TS3198
For questions regarding AT&T Mobile device, please visit the Phone/Device Learning Center.
Thank you for your business. For other questions about our AT&T wireless service or other Mobile devices, please visit att.com.

I am trying to set up Sharing amongst several computers on my home network. I have followed all the setup instructions but after completion Sharing does not appear in my iTunes window (on any of the computers I've set up). There is no explanation why.

I have been trying to set up Sharing between two computers on my network. I did this once and it worked. However, when I try to set this up now the Sharing feature does not appear on the left side of the iTunes window (on either computer). There is no explanation as to why not. Is this a configuration problem, a network problem or what? Can it be fixed? I have tried turning sharing off and back on on both computers but to no avail. What am I missing? Thanks for any help you can provide.

Hey innerev2003,
Thanks for the question, and welcome to Apple Support Communities.
If, while searching through your past purchases, items are unavailable to download and show a "Purchased" button, they are still on your computer. It may be best to search your iTunes library by clicking Music, then use the search bar at the top right.
If you are completely sure the items are no longer in your library, try signing out of the iTunes Store, and then back in.
iTunes 11 for Windows: Manage your iTunes Store account
http://support.apple.com/kb/PH12507
Thanks,
Matt M.

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201

BPM Application Link does not appear in BPM Workspace (11.1.1.7)

I spent huge amount of time to reveal why does that happens.
All that follows further is valid for BPM Suite 11.1.1.7.
The scenario.
You developed a simple BPM process with Initiator pattern (maybe by following the "Quote Request" tutorial).
But the application link did not appear in BPM Workspace.
Here i'm skipping any kind of mistakes as "oh, incorrect swimlane", "oh, i did not include the user to the app role" and so on.
At first, you should know about the "feature" - You have to attach task form to the Initiator Human Task to see the App Link.
The simplest way to do that is to AutoGenerate task form (and deploy it, of course).
Else the Appication Link will not appear.
One exception to this rule - If your Task HAS NO PAYLOAD (no parameters) the Task Form is not required (to appearing of the Application Link).
The second find is a bug (is think so).
If you edited the Role that Attached to the swimlane of Initiator Task, you will not see the Application Link.
If you look to organization.xml you will see something like this:
        <ns1:applicationRole id="StartTask.InitRole" isProcessRole="true">
            <ns5:name>StartTask.InitRole1</ns5:name>
            <ns1:processRole id="InitRole" name="InitRole1"/>
        </ns1:applicationRole>
The Application Link will appear ONLY IF THE "applicationRole id", "applicationRole name" and "processRole id" have the same value.
When you edit name of the application role in Organization Editor you change "applicationRole name" and "processRole name" values.
After that "applicationRole id" != "applicationRole name" and the Link does not appear.
How to fix?
Just edit organization.xml (with external editor) - change the "applicationRole name" to the value of "applicationRole id".
That allows to have value of "processRole name" something like "The Initiator Role" - that value appears in the BPMN diagram of process.
Also you can edit organization.xml with Organization Editor and set the Name to the value of "applicationRole id".
In that case the associated swimlane will have the same name as the "applicationRole id".
Hope this helps somebody
Oleg

Flash Player is a browser add-on, not an executable program.
If you need to open a local SWF file you will need the standalone player (Projector) from http://www.adobe.com/support/flashplayer/downloads.html
Note that the download is the player, not an installer, so you will need to make the file association manually.

File Place does not appear on my menu. Neither does Tools Photoshop Image processor.

In Bridge File>Place is grayed out on my menu. Tools>Photoshop>Image processor does not appear at all. I have reset the preferences numerous times and am good to go until I shut down my computer. When I reboot they are gone again. I have a Mac with OS 10.10.2 (Yosemite) and CC.

Mardi Carter wrote:
I shut down using "Shut Down" under the Apple menu.....always…
Well, that's fine for the OS, but sometimes not so great for Photoshop. Try QUITTING Photoshop from the Photoshop menu, or by Command Q, before you get anywhere near your Apple menu .
Gene gave you sound advice, but don't forget to run Repair Permissions with Apple's Disk Utility before and after any installation, upgrade or update of the OS or any application.
You'd think that shouldn't be necessary, but it is indeed vital, indispensable routine maintenance.
Forget about "it had never happened before", Yosemite is a work in progress. Apple never gets a major OS X release right until about the dot four or five release, so Yosemite has a way to go before it's at 10.10.4 or 10.10.5. That has proven to be the nature of the beast.

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

I received no error message. The application was just trying to find applications unsuccessfully.
I am using MAC OS 10.10.1
I tried to uninstall the application but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
Otherwise I would have to reinstall everything and this would be a pain.
Thanks for your help.

ATT Centro does not appear as modem

Similar Messages

Maybe you are looking for